kernel-ark/arch/powerpc/kernel/cpu_setup_fsl_booke.S
Scott Wood 3a6e9bd7f6 powerpc/e5500: set non-base IVORs
Without this, we attempt to use doorbells for IPIs, and end up
branching to some bad address.  Plus, even for the exceptions
we don't implement, it's good to handle it and get a message out.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-19 00:36:43 -05:00

99 lines
2.2 KiB
ArmAsm

/*
* This file contains low level CPU setup functions.
* Kumar Gala <galak@kernel.crashing.org>
* Copyright 2009 Freescale Semiconductor, Inc.
*
* Based on cpu_setup_6xx code by
* Benjamin Herrenschmidt <benh@kernel.crashing.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*/
#include <asm/processor.h>
#include <asm/cputable.h>
#include <asm/ppc_asm.h>
_GLOBAL(__e500_icache_setup)
mfspr r0, SPRN_L1CSR1
andi. r3, r0, L1CSR1_ICE
bnelr /* Already enabled */
oris r0, r0, L1CSR1_CPE@h
ori r0, r0, (L1CSR1_ICFI | L1CSR1_ICLFR | L1CSR1_ICE)
mtspr SPRN_L1CSR1, r0 /* Enable I-Cache */
isync
blr
_GLOBAL(__e500_dcache_setup)
mfspr r0, SPRN_L1CSR0
andi. r3, r0, L1CSR0_DCE
bnelr /* Already enabled */
msync
isync
li r0, 0
mtspr SPRN_L1CSR0, r0 /* Disable */
msync
isync
li r0, (L1CSR0_DCFI | L1CSR0_CLFC)
mtspr SPRN_L1CSR0, r0 /* Invalidate */
isync
1: mfspr r0, SPRN_L1CSR0
andi. r3, r0, L1CSR0_CLFC
bne+ 1b /* Wait for lock bits reset */
oris r0, r0, L1CSR0_CPE@h
ori r0, r0, L1CSR0_DCE
msync
isync
mtspr SPRN_L1CSR0, r0 /* Enable */
isync
blr
#ifdef CONFIG_PPC32
_GLOBAL(__setup_cpu_e200)
/* enable dedicated debug exception handling resources (Debug APU) */
mfspr r3,SPRN_HID0
ori r3,r3,HID0_DAPUEN@l
mtspr SPRN_HID0,r3
b __setup_e200_ivors
_GLOBAL(__setup_cpu_e500v1)
_GLOBAL(__setup_cpu_e500v2)
mflr r4
bl __e500_icache_setup
bl __e500_dcache_setup
bl __setup_e500_ivors
#ifdef CONFIG_FSL_RIO
/* Ensure that RFXE is set */
mfspr r3,SPRN_HID1
oris r3,r3,HID1_RFXE@h
mtspr SPRN_HID1,r3
#endif
mtlr r4
blr
_GLOBAL(__setup_cpu_e500mc)
mflr r4
bl __e500_icache_setup
bl __e500_dcache_setup
bl __setup_e500mc_ivors
mtlr r4
blr
#endif
/* Right now, restore and setup are the same thing */
_GLOBAL(__restore_cpu_e5500)
_GLOBAL(__setup_cpu_e5500)
mflr r4
bl __e500_icache_setup
bl __e500_dcache_setup
#ifdef CONFIG_PPC_BOOK3E_64
bl .__setup_base_ivors
bl .setup_perfmon_ivor
bl .setup_doorbell_ivors
bl .setup_ehv_ivors
#else
bl __setup_e500mc_ivors
#endif
mtlr r4
blr