kernel-ark/include/asm-v850/fpga85e2c.h
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

89 lines
2.5 KiB
C

/*
* include/asm-v850/fpga85e2c.h -- Machine-dependent defs for
* FPGA implementation of V850E2/NA85E2C
*
* Copyright (C) 2002,03 NEC Electronics Corporation
* Copyright (C) 2002,03 Miles Bader <miles@gnu.org>
*
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file COPYING in the main directory of this
* archive for more details.
*
* Written by Miles Bader <miles@gnu.org>
*/
#ifndef __V850_FPGA85E2C_H__
#define __V850_FPGA85E2C_H__
#include <asm/v850e2.h>
#include <asm/clinkage.h>
#define CPU_MODEL "v850e2/fpga85e2c"
#define CPU_MODEL_LONG "NEC V850E2/NA85E2C"
#define PLATFORM "fpga85e2c"
#define PLATFORM_LONG "NA85E2C FPGA implementation"
/* `external ram'. */
#define ERAM_ADDR 0
#define ERAM_SIZE 0x00100000 /* 1MB */
/* FPGA specific control registers. */
/* Writing a non-zero value to FLGREG(0) will signal the controlling CPU
to stop execution. */
#define FLGREG_ADDR(n) (0xFFE80100 + 2*(n))
#define FLGREG(n) (*(volatile unsigned char *)FLGREG_ADDR (n))
#define FLGREG_NUM 2
#define CSDEV_ADDR(n) (0xFFE80110 + 2*(n))
#define CSDEV(n) (*(volatile unsigned char *)CSDEV_ADDR (n))
/* Timer interrupts 0-3, interrupt at intervals from CLK/4096 to CLK/16384. */
#define IRQ_RPU(n) (60 + (n))
#define IRQ_RPU_NUM 4
/* For <asm/irq.h> */
#define NUM_CPU_IRQS 64
/* General-purpose timer. */
/* control/status register (can only be read/written via bit insns) */
#define RPU_GTMC_ADDR 0xFFFFFB00
#define RPU_GTMC (*(volatile unsigned char *)RPU_GTMC_ADDR)
#define RPU_GTMC_CE_BIT 7 /* clock enable (control) */
#define RPU_GTMC_OV_BIT 6 /* overflow (status) */
#define RPU_GTMC_CLK_BIT 1 /* 0 = .5 MHz CLK, 1 = 1 Mhz (control) */
/* 32-bit count (8 least-significant bits are always zero). */
#define RPU_GTM_ADDR 0xFFFFFB28
#define RPU_GTM (*(volatile unsigned long *)RPU_GTMC_ADDR)
/* For <asm/page.h> */
#define PAGE_OFFSET ERAM_ADDR /* minimum allocatable address */
/* For <asm/entry.h> */
/* `R0 RAM', used for a few miscellaneous variables that must be accessible
using a load instruction relative to R0. The FPGA implementation
actually has no on-chip RAM, so we use part of main ram just after the
interrupt vectors. */
#ifdef __ASSEMBLY__
#define R0_RAM_ADDR lo(C_SYMBOL_NAME(_r0_ram))
#else
extern char _r0_ram;
#define R0_RAM_ADDR ((unsigned long)&_r0_ram);
#endif
/* For <asm/param.h> */
#ifndef HZ
#define HZ 122 /* actually, 8.192ms ticks =~ 122.07 */
#endif
#endif /* __V850_FPGA85E2C_H__ */