4a043d79dc
As long as there is no other non-const variable marked __initdata in the same compilation unit it doesn't hurt. If there were one however compilation would fail with error: $variablename causes a section type conflict because a section containing const variables is marked read only and so cannot contain non-const variables. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: kernel@pengutronix.de Patchwork: https://patchwork.linux-mips.org/patch/3565/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
97 lines
4.2 KiB
C
97 lines
4.2 KiB
C
/*
|
|
* Locations of devices in the Gaia ASIC
|
|
*
|
|
* Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*
|
|
* Author: David VomLehn
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <asm/mach-powertv/asic.h>
|
|
|
|
const struct register_map gaia_register_map __initconst = {
|
|
.eic_slow0_strt_add = {.phys = GAIA_IO_BASE + 0x000000},
|
|
.eic_cfg_bits = {.phys = GAIA_IO_BASE + 0x000038},
|
|
.eic_ready_status = {.phys = GAIA_IO_BASE + 0x00004C},
|
|
|
|
.chipver3 = {.phys = GAIA_IO_BASE + 0x2A0800},
|
|
.chipver2 = {.phys = GAIA_IO_BASE + 0x2A0804},
|
|
.chipver1 = {.phys = GAIA_IO_BASE + 0x2A0808},
|
|
.chipver0 = {.phys = GAIA_IO_BASE + 0x2A080C},
|
|
|
|
/* The registers of IRBlaster */
|
|
.uart1_intstat = {.phys = GAIA_IO_BASE + 0x2A1800},
|
|
.uart1_inten = {.phys = GAIA_IO_BASE + 0x2A1804},
|
|
.uart1_config1 = {.phys = GAIA_IO_BASE + 0x2A1808},
|
|
.uart1_config2 = {.phys = GAIA_IO_BASE + 0x2A180C},
|
|
.uart1_divisorhi = {.phys = GAIA_IO_BASE + 0x2A1810},
|
|
.uart1_divisorlo = {.phys = GAIA_IO_BASE + 0x2A1814},
|
|
.uart1_data = {.phys = GAIA_IO_BASE + 0x2A1818},
|
|
.uart1_status = {.phys = GAIA_IO_BASE + 0x2A181C},
|
|
|
|
.int_stat_3 = {.phys = GAIA_IO_BASE + 0x2A2800},
|
|
.int_stat_2 = {.phys = GAIA_IO_BASE + 0x2A2804},
|
|
.int_stat_1 = {.phys = GAIA_IO_BASE + 0x2A2808},
|
|
.int_stat_0 = {.phys = GAIA_IO_BASE + 0x2A280C},
|
|
.int_config = {.phys = GAIA_IO_BASE + 0x2A2810},
|
|
.int_int_scan = {.phys = GAIA_IO_BASE + 0x2A2818},
|
|
.ien_int_3 = {.phys = GAIA_IO_BASE + 0x2A2830},
|
|
.ien_int_2 = {.phys = GAIA_IO_BASE + 0x2A2834},
|
|
.ien_int_1 = {.phys = GAIA_IO_BASE + 0x2A2838},
|
|
.ien_int_0 = {.phys = GAIA_IO_BASE + 0x2A283C},
|
|
.int_level_3_3 = {.phys = GAIA_IO_BASE + 0x2A2880},
|
|
.int_level_3_2 = {.phys = GAIA_IO_BASE + 0x2A2884},
|
|
.int_level_3_1 = {.phys = GAIA_IO_BASE + 0x2A2888},
|
|
.int_level_3_0 = {.phys = GAIA_IO_BASE + 0x2A288C},
|
|
.int_level_2_3 = {.phys = GAIA_IO_BASE + 0x2A2890},
|
|
.int_level_2_2 = {.phys = GAIA_IO_BASE + 0x2A2894},
|
|
.int_level_2_1 = {.phys = GAIA_IO_BASE + 0x2A2898},
|
|
.int_level_2_0 = {.phys = GAIA_IO_BASE + 0x2A289C},
|
|
.int_level_1_3 = {.phys = GAIA_IO_BASE + 0x2A28A0},
|
|
.int_level_1_2 = {.phys = GAIA_IO_BASE + 0x2A28A4},
|
|
.int_level_1_1 = {.phys = GAIA_IO_BASE + 0x2A28A8},
|
|
.int_level_1_0 = {.phys = GAIA_IO_BASE + 0x2A28AC},
|
|
.int_level_0_3 = {.phys = GAIA_IO_BASE + 0x2A28B0},
|
|
.int_level_0_2 = {.phys = GAIA_IO_BASE + 0x2A28B4},
|
|
.int_level_0_1 = {.phys = GAIA_IO_BASE + 0x2A28B8},
|
|
.int_level_0_0 = {.phys = GAIA_IO_BASE + 0x2A28BC},
|
|
.int_docsis_en = {.phys = GAIA_IO_BASE + 0x2A28F4},
|
|
|
|
.mips_pll_setup = {.phys = GAIA_IO_BASE + 0x1C0000},
|
|
.fs432x4b4_usb_ctl = {.phys = GAIA_IO_BASE + 0x1C0024},
|
|
.test_bus = {.phys = GAIA_IO_BASE + 0x1C00CC},
|
|
.crt_spare = {.phys = GAIA_IO_BASE + 0x1c0108},
|
|
.usb2_ohci_int_mask = {.phys = GAIA_IO_BASE + 0x20000C},
|
|
.usb2_strap = {.phys = GAIA_IO_BASE + 0x200014},
|
|
.ehci_hcapbase = {.phys = GAIA_IO_BASE + 0x21FE00},
|
|
.ohci_hc_revision = {.phys = GAIA_IO_BASE + 0x21fc00},
|
|
.bcm1_bs_lmi_steer = {.phys = GAIA_IO_BASE + 0x2E0004},
|
|
.usb2_control = {.phys = GAIA_IO_BASE + 0x2E004C},
|
|
.usb2_stbus_obc = {.phys = GAIA_IO_BASE + 0x21FF00},
|
|
.usb2_stbus_mess_size = {.phys = GAIA_IO_BASE + 0x21FF04},
|
|
.usb2_stbus_chunk_size = {.phys = GAIA_IO_BASE + 0x21FF08},
|
|
|
|
.pcie_regs = {.phys = GAIA_IO_BASE + 0x220000},
|
|
.tim_ch = {.phys = GAIA_IO_BASE + 0x2A2C10},
|
|
.tim_cl = {.phys = GAIA_IO_BASE + 0x2A2C14},
|
|
.gpio_dout = {.phys = GAIA_IO_BASE + 0x2A2C20},
|
|
.gpio_din = {.phys = GAIA_IO_BASE + 0x2A2C24},
|
|
.gpio_dir = {.phys = GAIA_IO_BASE + 0x2A2C2C},
|
|
.watchdog = {.phys = GAIA_IO_BASE + 0x2A2C30},
|
|
.front_panel = {.phys = GAIA_IO_BASE + 0x2A3800},
|
|
};
|