kernel-ark/drivers/acorn/block/fd1772dma.S
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

101 lines
2.8 KiB
ArmAsm

#include <asm/hardware.h>
@ Code for DMA with the 1772 fdc
.text
.global fdc1772_dataaddr
fdc1772_fiqdata:
@ Number of bytes left to DMA
.global fdc1772_bytestogo
fdc1772_bytestogo:
.word 0
@ Place to put/get data from in DMA
.global fdc1772_dataaddr
fdc1772_dataaddr:
.word 0
.global fdc1772_fdc_int_done
fdc1772_fdc_int_done:
.word 0
.global fdc1772_comendstatus
fdc1772_comendstatus:
.word 0
@ We hang this off DMA channel 1
.global fdc1772_comendhandler
fdc1772_comendhandler:
mov r8,#IOC_BASE
ldrb r9,[r8,#0x34] @ IOC FIQ status
tst r9,#2
subeqs pc,r14,#4 @ should I leave a space here
orr r9,r8,#0x10000 @ FDC base
adr r8,fdc1772_fdc_int_done
ldrb r10,[r9,#0] @ FDC status
mov r9,#1 @ Got a FIQ flag
stmia r8,{r9,r10}
subs pc,r14,#4
.global fdc1772_dma_read
fdc1772_dma_read:
mov r8,#IOC_BASE
ldrb r9,[r8,#0x34] @ IOC FIQ status
tst r9,#1
beq fdc1772_dma_read_notours
orr r8,r8,#0x10000 @ FDC base
ldrb r10,[r8,#0xc] @ Read from FDC data reg (also clears interrupt)
ldmia r11,{r8,r9}
subs r8,r8,#1 @ One less byte to go
@ If there was somewhere for this data to go then store it and update pointers
strplb r10,[r9],#1 @ Store the data and increment the pointer
stmplia r11,{r8,r9} @ Update count/pointers
@ Handle any other interrupts if there are any
fdc1772_dma_read_notours:
@ Cant branch because this code has been copied down to the FIQ vector
ldr pc,[pc,#-4]
.word fdc1772_comendhandler
.global fdc1772_dma_read_end
fdc1772_dma_read_end:
.global fdc1772_dma_write
fdc1772_dma_write:
mov r8,#IOC_BASE
ldrb r9,[r8,#0x34] @ IOC FIQ status
tst r9,#1
beq fdc1772_dma_write_notours
orr r8,r8,#0x10000 @ FDC base
ldmia r11,{r9,r10}
subs r9,r9,#1 @ One less byte to go
@ If there really is some data then get it, store it and update count
ldrplb r12,[r10],#1
strplb r12,[r8,#0xc] @ write it to FDC data reg
stmplia r11,{r9,r10} @ Update count and pointer - should clear interrupt
@ Handle any other interrupts
fdc1772_dma_write_notours:
@ Cant branch because this code has been copied down to the FIQ vector
ldr pc,[pc,#-4]
.word fdc1772_comendhandler
.global fdc1772_dma_write_end
fdc1772_dma_write_end:
@ Setup the FIQ R11 to point to the data and store the count, address
@ for this dma
@ R0=count
@ R1=address
.global fdc1772_setupdma
fdc1772_setupdma:
@ The big job is flipping in and out of FIQ mode
adr r2,fdc1772_fiqdata @ This is what we really came here for
stmia r2,{r0,r1}
mov r3, pc
teqp pc,#0x0c000001 @ Disable FIQs, IRQs and switch to FIQ mode
mov r0,r0 @ NOP
mov r11,r2
teqp r3,#0 @ Normal mode
mov r0,r0 @ NOP
mov pc,r14