kernel-ark/drivers/usb
David Brownell f197b2c54b [PATCH] OHCI PM updates
This simplifies the OHCI root hub suspend logic:

 - Uses new usbcore root hub calls to make autosuspend work again:
	* Uses a newish usbcore root hub wakeup mechanism,
	  making requests to khubd not keventd.
	* Uses an even newer sibling suspend hook.

 - Expect someone always made usbcore call ohci_hub_suspend() before bus
   glue fires; and that ohci_hub_resume() is only called after that bus
   glue ran.  Previously, only CONFIG_USB_SUSPEND promised those things.
   (Includes updates to PCI and OMAP bus glue.)

 - Handle a not-noticed-before special case during resume from one of
   the swsusp snapshots when using "usb-handoff":  the controller isn't
   left in RESET state.  (A bug to fix in the usb-handoff code...)

Also cleans up a minor debug printk glitch, and switches an mdelay over
to an msleep (how did that stick around for so long?).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 drivers/usb/host/ohci-dbg.c  |    4 ----
 drivers/usb/host/ohci-hcd.c  |    2 +-
 drivers/usb/host/ohci-hub.c  |   42 ++++++++++++------------------------------
 drivers/usb/host/ohci-mem.c  |    1 -
 drivers/usb/host/ohci-omap.c |   36 ++++++++++++------------------------
 drivers/usb/host/ohci-pci.c  |   40 ++++++++--------------------------------
 drivers/usb/host/ohci.h      |    1 -
 7 files changed, 33 insertions(+), 93 deletions(-)
2005-10-28 16:47:40 -07:00
..
atm [PATCH] USB: URB_ASYNC_UNLINK flag removed from the kernel 2005-09-08 16:23:04 -07:00
class [PATCH] devfs: Remove the mode field from usb_class_driver as it's no longer needed 2005-10-28 16:47:37 -07:00
core [PATCH] usbcore PCI glue updates for PM 2005-10-28 16:47:40 -07:00
gadget Merge ../bleed-2.6 2005-10-28 10:13:16 -07:00
host [PATCH] OHCI PM updates 2005-10-28 16:47:40 -07:00
image [PATCH] devfs: Remove the mode field from usb_class_driver as it's no longer needed 2005-10-28 16:47:37 -07:00
input [PATCH] usb_interface power state 2005-10-28 16:47:38 -07:00
media [PATCH] devfs: Remove the mode field from usb_class_driver as it's no longer needed 2005-10-28 16:47:37 -07:00
misc [PATCH] usb_interface power state 2005-10-28 16:47:38 -07:00
mon [PATCH] USB: Usbmon setup DMA patch 2005-09-12 12:23:54 -07:00
net [PATCH] usb_interface power state 2005-10-28 16:47:38 -07:00
serial [PATCH] USB: ftdi: Artemis and ATIK based USB astronomical CCD cameras 2005-10-28 16:47:37 -07:00
storage [PATCH] Input: convert onetouch to dynamic input_dev allocation 2005-10-28 09:52:53 -07:00
Kconfig [PATCH] USB: add S3C24XX USB Host driver support 2005-07-29 13:12:53 -07:00
Makefile [PATCH] USB: move handoff code 2005-10-28 16:47:38 -07:00
README
usb-skeleton.c [PATCH] devfs: Remove the mode field from usb_class_driver as it's no longer needed 2005-10-28 16:47:37 -07:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
input/		- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
media/		- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.