kernel-ark/arch/powerpc/sysdev/fsl_pci.c
Kumar Gala 72b122cc30 [POWERPC] FSL: Rework PCI/PCIe support for 85xx/86xx
The current PCI code for Freescale 85xx/86xx was treating the virtual
P2P PCIe bridge as a transparent bridge.  Rather than doing that fixup
the virtual P2P bridge by copying the resources from the PHB.

Also, fixup a bit of the code for dealing with resource_size_t being
64-bits and how we set ATMU registers for >4G.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 19:31:16 -06:00

237 lines
7.8 KiB
C

/*
* MPC85xx/86xx PCI/PCIE support routing.
*
* Copyright 2007 Freescale Semiconductor, Inc
*
* Initial author: Xianghua Xiao <x.xiao@freescale.com>
* Recode: ZHANG WEI <wei.zhang@freescale.com>
* Rewrite the routing for Frescale PCI and PCI Express
* Roy Zang <tie-fei.zang@freescale.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/bootmem.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/pci-bridge.h>
#include <asm/machdep.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
/* atmu setup for fsl pci/pcie controller */
void __init setup_pci_atmu(struct pci_controller *hose, struct resource *rsrc)
{
struct ccsr_pci __iomem *pci;
int i;
pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n",
(u64)rsrc->start, (u64)rsrc->end - (u64)rsrc->start + 1);
pci = ioremap(rsrc->start, rsrc->end - rsrc->start + 1);
/* Disable all windows (except powar0 since its ignored) */
for(i = 1; i < 5; i++)
out_be32(&pci->pow[i].powar, 0);
for(i = 0; i < 3; i++)
out_be32(&pci->piw[i].piwar, 0);
/* Setup outbound MEM window */
for(i = 0; i < 3; i++)
if (hose->mem_resources[i].flags & IORESOURCE_MEM){
resource_size_t pci_addr_start =
hose->mem_resources[i].start -
hose->pci_mem_offset;
pr_debug("PCI MEM resource start 0x%016llx, size 0x%016llx.\n",
(u64)hose->mem_resources[i].start,
(u64)hose->mem_resources[i].end
- (u64)hose->mem_resources[i].start + 1);
out_be32(&pci->pow[i+1].potar, (pci_addr_start >> 12));
out_be32(&pci->pow[i+1].potear, 0);
out_be32(&pci->pow[i+1].powbar,
(hose->mem_resources[i].start >> 12));
/* Enable, Mem R/W */
out_be32(&pci->pow[i+1].powar, 0x80044000
| (__ilog2(hose->mem_resources[i].end
- hose->mem_resources[i].start + 1) - 1));
}
/* Setup outbound IO window */
if (hose->io_resource.flags & IORESOURCE_IO){
pr_debug("PCI IO resource start 0x%016llx, size 0x%016llx, "
"phy base 0x%016llx.\n",
(u64)hose->io_resource.start,
(u64)hose->io_resource.end - (u64)hose->io_resource.start + 1,
(u64)hose->io_base_phys);
out_be32(&pci->pow[i+1].potar, (hose->io_resource.start >> 12));
out_be32(&pci->pow[i+1].potear, 0);
out_be32(&pci->pow[i+1].powbar, (hose->io_base_phys >> 12));
/* Enable, IO R/W */
out_be32(&pci->pow[i+1].powar, 0x80088000
| (__ilog2(hose->io_resource.end
- hose->io_resource.start + 1) - 1));
}
/* Setup 2G inbound Memory Window @ 1 */
out_be32(&pci->piw[2].pitar, 0x00000000);
out_be32(&pci->piw[2].piwbar,0x00000000);
out_be32(&pci->piw[2].piwar, PIWAR_2G);
}
void __init setup_pci_cmd(struct pci_controller *hose)
{
u16 cmd;
int cap_x;
early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd);
cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY
| PCI_COMMAND_IO;
early_write_config_word(hose, 0, 0, PCI_COMMAND, cmd);
cap_x = early_find_capability(hose, 0, 0, PCI_CAP_ID_PCIX);
if (cap_x) {
int pci_x_cmd = cap_x + PCI_X_CMD;
cmd = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
| PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
early_write_config_word(hose, 0, 0, pci_x_cmd, cmd);
} else {
early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80);
}
}
static int fsl_pcie_bus_fixup;
static void __init quirk_fsl_pcie_header(struct pci_dev *dev)
{
/* if we aren't a PCIe don't bother */
if (!pci_find_capability(dev, PCI_CAP_ID_EXP))
return ;
dev->class = PCI_CLASS_BRIDGE_PCI << 8;
fsl_pcie_bus_fixup = 1;
return ;
}
int __init fsl_pcie_check_link(struct pci_controller *hose)
{
u32 val;
early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val);
if (val < PCIE_LTSSM_L0)
return 1;
return 0;
}
void fsl_pcibios_fixup_bus(struct pci_bus *bus)
{
struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
int i;
if ((bus->parent == hose->bus) &&
((fsl_pcie_bus_fixup &&
early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) ||
(hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK)))
{
for (i = 0; i < 4; ++i) {
struct resource *res = bus->resource[i];
struct resource *par = bus->parent->resource[i];
if (res) {
res->start = 0;
res->end = 0;
res->flags = 0;
}
if (res && par) {
res->start = par->start;
res->end = par->end;
res->flags = par->flags;
}
}
}
}
int __init fsl_add_bridge(struct device_node *dev, int is_primary)
{
int len;
struct pci_controller *hose;
struct resource rsrc;
const int *bus_range;
pr_debug("Adding PCI host bridge %s\n", dev->full_name);
/* Fetch host bridge registers address */
if (of_address_to_resource(dev, 0, &rsrc)) {
printk(KERN_WARNING "Can't get pci register base!");
return -ENOMEM;
}
/* Get bus range if any */
bus_range = of_get_property(dev, "bus-range", &len);
if (bus_range == NULL || len < 2 * sizeof(int))
printk(KERN_WARNING "Can't get bus-range for %s, assume"
" bus 0\n", dev->full_name);
ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
hose = pcibios_alloc_controller(dev);
if (!hose)
return -ENOMEM;
hose->first_busno = bus_range ? bus_range[0] : 0x0;
hose->last_busno = bus_range ? bus_range[1] : 0xff;
setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4,
PPC_INDIRECT_TYPE_BIG_ENDIAN);
setup_pci_cmd(hose);
/* check PCI express link status */
if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
hose->indirect_type |= PPC_INDIRECT_TYPE_EXT_REG |
PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS;
if (fsl_pcie_check_link(hose))
hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK;
}
printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. "
"Firmware bus number: %d->%d\n",
(unsigned long long)rsrc.start, hose->first_busno,
hose->last_busno);
pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
hose, hose->cfg_addr, hose->cfg_data);
/* Interpret the "ranges" property */
/* This also maps the I/O region and sets isa_io/mem_base */
pci_process_bridge_OF_ranges(hose, dev, is_primary);
/* Setup PEX window registers */
setup_pci_atmu(hose, &rsrc);
return 0;
}
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8548E, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8548, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8543E, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8543, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8547E, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8545E, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8545, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8568E, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8568, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8567E, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8567, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8533E, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8533, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8544E, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8544, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8572E, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8572, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header);