kernel-ark/drivers/mfd/rsmu_i2c.c
Min Li a1867f85e0 mfd: Add Renesas Synchronization Management Unit (SMU) support
Add support for ClockMatrix(TM) and 82P33xxx families of timing
and synchronization devices. The access interface can be either
SPI or I2C. Currently, it will create 2 types of MFD devices,
which are to be used by the corresponding rsmu character device
driver and the PTP hardware clock driver, respectively.

Signed-off-by: Min Li <min.li.xe@renesas.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-07-13 12:20:44 +01:00

204 lines
4.8 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* I2C driver for Renesas Synchronization Management Unit (SMU) devices.
*
* Copyright (C) 2021 Integrated Device Technology, Inc., a Renesas Company.
*/
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/mfd/core.h>
#include <linux/mfd/rsmu.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include "rsmu.h"
/*
* 16-bit register address: the lower 8 bits of the register address come
* from the offset addr byte and the upper 8 bits come from the page register.
*/
#define RSMU_CM_PAGE_ADDR 0xFD
#define RSMU_CM_PAGE_WINDOW 256
/*
* 15-bit register address: the lower 7 bits of the register address come
* from the offset addr byte and the upper 8 bits come from the page register.
*/
#define RSMU_SABRE_PAGE_ADDR 0x7F
#define RSMU_SABRE_PAGE_WINDOW 128
static const struct regmap_range_cfg rsmu_cm_range_cfg[] = {
{
.range_min = 0,
.range_max = 0xD000,
.selector_reg = RSMU_CM_PAGE_ADDR,
.selector_mask = 0xFF,
.selector_shift = 0,
.window_start = 0,
.window_len = RSMU_CM_PAGE_WINDOW,
}
};
static const struct regmap_range_cfg rsmu_sabre_range_cfg[] = {
{
.range_min = 0,
.range_max = 0x400,
.selector_reg = RSMU_SABRE_PAGE_ADDR,
.selector_mask = 0xFF,
.selector_shift = 0,
.window_start = 0,
.window_len = RSMU_SABRE_PAGE_WINDOW,
}
};
static bool rsmu_cm_volatile_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case RSMU_CM_PAGE_ADDR:
return false;
default:
return true;
}
}
static bool rsmu_sabre_volatile_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case RSMU_SABRE_PAGE_ADDR:
return false;
default:
return true;
}
}
static const struct regmap_config rsmu_cm_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = 0xD000,
.ranges = rsmu_cm_range_cfg,
.num_ranges = ARRAY_SIZE(rsmu_cm_range_cfg),
.volatile_reg = rsmu_cm_volatile_reg,
.cache_type = REGCACHE_RBTREE,
.can_multi_write = true,
};
static const struct regmap_config rsmu_sabre_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = 0x400,
.ranges = rsmu_sabre_range_cfg,
.num_ranges = ARRAY_SIZE(rsmu_sabre_range_cfg),
.volatile_reg = rsmu_sabre_volatile_reg,
.cache_type = REGCACHE_RBTREE,
.can_multi_write = true,
};
static const struct regmap_config rsmu_sl_regmap_config = {
.reg_bits = 16,
.val_bits = 8,
.reg_format_endian = REGMAP_ENDIAN_BIG,
.max_register = 0x339,
.cache_type = REGCACHE_NONE,
.can_multi_write = true,
};
static int rsmu_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
const struct regmap_config *cfg;
struct rsmu_ddata *rsmu;
int ret;
rsmu = devm_kzalloc(&client->dev, sizeof(*rsmu), GFP_KERNEL);
if (!rsmu)
return -ENOMEM;
i2c_set_clientdata(client, rsmu);
rsmu->dev = &client->dev;
rsmu->type = (enum rsmu_type)id->driver_data;
switch (rsmu->type) {
case RSMU_CM:
cfg = &rsmu_cm_regmap_config;
break;
case RSMU_SABRE:
cfg = &rsmu_sabre_regmap_config;
break;
case RSMU_SL:
cfg = &rsmu_sl_regmap_config;
break;
default:
dev_err(rsmu->dev, "Unsupported RSMU device type: %d\n", rsmu->type);
return -ENODEV;
}
rsmu->regmap = devm_regmap_init_i2c(client, cfg);
if (IS_ERR(rsmu->regmap)) {
ret = PTR_ERR(rsmu->regmap);
dev_err(rsmu->dev, "Failed to allocate register map: %d\n", ret);
return ret;
}
return rsmu_core_init(rsmu);
}
static int rsmu_i2c_remove(struct i2c_client *client)
{
struct rsmu_ddata *rsmu = i2c_get_clientdata(client);
rsmu_core_exit(rsmu);
return 0;
}
static const struct i2c_device_id rsmu_i2c_id[] = {
{ "8a34000", RSMU_CM },
{ "8a34001", RSMU_CM },
{ "82p33810", RSMU_SABRE },
{ "82p33811", RSMU_SABRE },
{ "8v19n850", RSMU_SL },
{ "8v19n851", RSMU_SL },
{}
};
MODULE_DEVICE_TABLE(i2c, rsmu_i2c_id);
static const struct of_device_id rsmu_i2c_of_match[] = {
{ .compatible = "idt,8a34000", .data = (void *)RSMU_CM },
{ .compatible = "idt,8a34001", .data = (void *)RSMU_CM },
{ .compatible = "idt,82p33810", .data = (void *)RSMU_SABRE },
{ .compatible = "idt,82p33811", .data = (void *)RSMU_SABRE },
{ .compatible = "idt,8v19n850", .data = (void *)RSMU_SL },
{ .compatible = "idt,8v19n851", .data = (void *)RSMU_SL },
{}
};
MODULE_DEVICE_TABLE(of, rsmu_i2c_of_match);
static struct i2c_driver rsmu_i2c_driver = {
.driver = {
.name = "rsmu-i2c",
.of_match_table = of_match_ptr(rsmu_i2c_of_match),
},
.probe = rsmu_i2c_probe,
.remove = rsmu_i2c_remove,
.id_table = rsmu_i2c_id,
};
static int __init rsmu_i2c_init(void)
{
return i2c_add_driver(&rsmu_i2c_driver);
}
subsys_initcall(rsmu_i2c_init);
static void __exit rsmu_i2c_exit(void)
{
i2c_del_driver(&rsmu_i2c_driver);
}
module_exit(rsmu_i2c_exit);
MODULE_DESCRIPTION("Renesas SMU I2C driver");
MODULE_LICENSE("GPL");