kernel-ark/arch/powerpc/boot/mv64x60.h
Mark A. Greer 0f81b11d2a [POWERPC] Add bootwrapper support for Marvell/mv64x60 hostbridge
The mv64x60 host bridge has many windows between its various components
(cpu, system memory, ethernet ctlr, MPSC, DMA ctlr, PCI MEM, PCI I/O).
Unfortunately, the firmware on some of mv64x60-based platforms do not
properly or completely configure those windows (e.g., MPSC->system memory
windows not configured or CPU->PCI MEM space not configured).

So, the missing configuration needs to be done in either the bootwrapper
or in the kernel.  To keep the kernel as clean as possible, it is done
in the bootwrapper.  Note that I/O controller configuration is NOT being
done, its only the windows to allow the I/O controllers and other components
to access memory, etc. that is being done--drivers assume that their
controllers can already access system memory).

Table of routines and the windows they configure:
	mv64x60_config_ctlr_windows()	ENET->System Memory
					MPSC->System Memory
					IDMA->System Memory

	mv64x60_config_pci_windows()	PCI MEM->System Memory
					PCI I/O->Bridge's Registers

	mv64x60_config_cpu2pci_window()	CPU->PCI MEM
					CPU->PCI I/O

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12 11:32:49 +10:00

71 lines
2.5 KiB
C

/*
* Author: Mark A. Greer <source@mvista.com>
*
* 2007 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#ifndef _PPC_BOOT_MV64x60_H_
#define _PPC_BOOT_MV64x60_H_
#define MV64x60_CPU_BAR_ENABLE 0x0278
#define MV64x60_PCI_ACC_CNTL_ENABLE (1<<0)
#define MV64x60_PCI_ACC_CNTL_REQ64 (1<<1)
#define MV64x60_PCI_ACC_CNTL_SNOOP_NONE 0x00000000
#define MV64x60_PCI_ACC_CNTL_SNOOP_WT 0x00000004
#define MV64x60_PCI_ACC_CNTL_SNOOP_WB 0x00000008
#define MV64x60_PCI_ACC_CNTL_SNOOP_MASK 0x0000000c
#define MV64x60_PCI_ACC_CNTL_ACCPROT (1<<4)
#define MV64x60_PCI_ACC_CNTL_WRPROT (1<<5)
#define MV64x60_PCI_ACC_CNTL_SWAP_BYTE 0x00000000
#define MV64x60_PCI_ACC_CNTL_SWAP_NONE 0x00000040
#define MV64x60_PCI_ACC_CNTL_SWAP_BYTE_WORD 0x00000080
#define MV64x60_PCI_ACC_CNTL_SWAP_WORD 0x000000c0
#define MV64x60_PCI_ACC_CNTL_SWAP_MASK 0x000000c0
#define MV64x60_PCI_ACC_CNTL_MBURST_32_BYTES 0x00000000
#define MV64x60_PCI_ACC_CNTL_MBURST_64_BYTES 0x00000100
#define MV64x60_PCI_ACC_CNTL_MBURST_128_BYTES 0x00000200
#define MV64x60_PCI_ACC_CNTL_MBURST_MASK 0x00000300
#define MV64x60_PCI_ACC_CNTL_RDSIZE_32_BYTES 0x00000000
#define MV64x60_PCI_ACC_CNTL_RDSIZE_64_BYTES 0x00000400
#define MV64x60_PCI_ACC_CNTL_RDSIZE_128_BYTES 0x00000800
#define MV64x60_PCI_ACC_CNTL_RDSIZE_256_BYTES 0x00000c00
#define MV64x60_PCI_ACC_CNTL_RDSIZE_MASK 0x00000c00
struct mv64x60_cpu2pci_win {
u32 lo;
u32 size;
u32 remap_hi;
u32 remap_lo;
};
extern struct mv64x60_cpu2pci_win mv64x60_cpu2pci_io[2];
extern struct mv64x60_cpu2pci_win mv64x60_cpu2pci_mem[2];
u32 mv64x60_cfg_read(u8 *bridge_base, u8 hose, u8 bus, u8 devfn,
u8 offset);
void mv64x60_cfg_write(u8 *bridge_base, u8 hose, u8 bus, u8 devfn,
u8 offset, u32 val);
void mv64x60_config_ctlr_windows(u8 *bridge_base, u8 *bridge_pbase,
u8 is_coherent);
void mv64x60_config_pci_windows(u8 *bridge_base, u8 *bridge_pbase, u8 hose,
u8 bus, u32 mem_size, u32 acc_bits);
void mv64x60_config_cpu2pci_window(u8 *bridge_base, u8 hose, u32 pci_base_hi,
u32 pci_base_lo, u32 cpu_base, u32 size,
struct mv64x60_cpu2pci_win *offset_tbl);
u32 mv64x60_get_mem_size(u8 *bridge_base);
u8 *mv64x60_get_bridge_pbase(void);
u8 *mv64x60_get_bridge_base(void);
u8 mv64x60_is_coherent(void);
int mv64x60_i2c_open(void);
int mv64x60_i2c_read(u32 devaddr, u8 *buf, u32 offset, u32 offset_size,
u32 count);
void mv64x60_i2c_close(void);
#endif /* _PPC_BOOT_MV64x60_H_ */