kernel-ark/drivers/video/cyber2000fb.c
Woody Suwalski cd792aa896 [PATCH] cyber2010 framebuffer on ARM Netwinder fix
The Netwinder machines with Cyber2010 crash badly when starting Xserver.
The workaround is to disable pci burst option for this revision of video
chip.

[akpm@osdl.org: cleanup]
Signed-off-by: Woody Suwalski <woodys@xandros.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: James Simmons <jsimmons@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:42 -08:00

1763 lines
43 KiB
C

/*
* linux/drivers/video/cyber2000fb.c
*
* Copyright (C) 1998-2002 Russell King
*
* MIPS and 50xx clock support
* Copyright (C) 2001 Bradley D. LaRonde <brad@ltc.com>
*
* 32 bit support, text color and panning fixes for modes != 8 bit
* Copyright (C) 2002 Denis Oliver Kropp <dok@directfb.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Integraphics CyberPro 2000, 2010 and 5000 frame buffer device
*
* Based on cyberfb.c.
*
* Note that we now use the new fbcon fix, var and cmap scheme. We do
* still have to check which console is the currently displayed one
* however, especially for the colourmap stuff.
*
* We also use the new hotplug PCI subsystem. I'm not sure if there
* are any such cards, but I'm erring on the side of caution. We don't
* want to go pop just because someone does have one.
*
* Note that this doesn't work fully in the case of multiple CyberPro
* cards with grabbers. We currently can only attach to the first
* CyberPro card found.
*
* When we're in truecolour mode, we power down the LUT RAM as a power
* saving feature. Also, when we enter any of the powersaving modes
* (except soft blanking) we power down the RAMDACs. This saves about
* 1W, which is roughly 8% of the power consumption of a NetWinder
* (which, incidentally, is about the same saving as a 2.5in hard disk
* entering standby mode.)
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#ifdef __arm__
#include <asm/mach-types.h>
#endif
#include "cyber2000fb.h"
struct cfb_info {
struct fb_info fb;
struct display_switch *dispsw;
struct display *display;
struct pci_dev *dev;
unsigned char __iomem *region;
unsigned char __iomem *regs;
u_int id;
int func_use_count;
u_long ref_ps;
/*
* Clock divisors
*/
u_int divisors[4];
struct {
u8 red, green, blue;
} palette[NR_PALETTE];
u_char mem_ctl1;
u_char mem_ctl2;
u_char mclk_mult;
u_char mclk_div;
/*
* RAMDAC control register is both of these or'ed together
*/
u_char ramdac_ctrl;
u_char ramdac_powerdown;
u32 pseudo_palette[16];
};
static char *default_font = "Acorn8x8";
module_param(default_font, charp, 0);
MODULE_PARM_DESC(default_font, "Default font name");
/*
* Our access methods.
*/
#define cyber2000fb_writel(val,reg,cfb) writel(val, (cfb)->regs + (reg))
#define cyber2000fb_writew(val,reg,cfb) writew(val, (cfb)->regs + (reg))
#define cyber2000fb_writeb(val,reg,cfb) writeb(val, (cfb)->regs + (reg))
#define cyber2000fb_readb(reg,cfb) readb((cfb)->regs + (reg))
static inline void
cyber2000_crtcw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
{
cyber2000fb_writew((reg & 255) | val << 8, 0x3d4, cfb);
}
static inline void
cyber2000_grphw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
{
cyber2000fb_writew((reg & 255) | val << 8, 0x3ce, cfb);
}
static inline unsigned int
cyber2000_grphr(unsigned int reg, struct cfb_info *cfb)
{
cyber2000fb_writeb(reg, 0x3ce, cfb);
return cyber2000fb_readb(0x3cf, cfb);
}
static inline void
cyber2000_attrw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
{
cyber2000fb_readb(0x3da, cfb);
cyber2000fb_writeb(reg, 0x3c0, cfb);
cyber2000fb_readb(0x3c1, cfb);
cyber2000fb_writeb(val, 0x3c0, cfb);
}
static inline void
cyber2000_seqw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
{
cyber2000fb_writew((reg & 255) | val << 8, 0x3c4, cfb);
}
/* -------------------- Hardware specific routines ------------------------- */
/*
* Hardware Cyber2000 Acceleration
*/
static void
cyber2000fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
{
struct cfb_info *cfb = (struct cfb_info *)info;
unsigned long dst, col;
if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) {
cfb_fillrect(info, rect);
return;
}
cyber2000fb_writeb(0, CO_REG_CONTROL, cfb);
cyber2000fb_writew(rect->width - 1, CO_REG_PIXWIDTH, cfb);
cyber2000fb_writew(rect->height - 1, CO_REG_PIXHEIGHT, cfb);
col = rect->color;
if (cfb->fb.var.bits_per_pixel > 8)
col = ((u32 *)cfb->fb.pseudo_palette)[col];
cyber2000fb_writel(col, CO_REG_FGCOLOUR, cfb);
dst = rect->dx + rect->dy * cfb->fb.var.xres_virtual;
if (cfb->fb.var.bits_per_pixel == 24) {
cyber2000fb_writeb(dst, CO_REG_X_PHASE, cfb);
dst *= 3;
}
cyber2000fb_writel(dst, CO_REG_DEST_PTR, cfb);
cyber2000fb_writeb(CO_FG_MIX_SRC, CO_REG_FGMIX, cfb);
cyber2000fb_writew(CO_CMD_L_PATTERN_FGCOL, CO_REG_CMD_L, cfb);
cyber2000fb_writew(CO_CMD_H_BLITTER, CO_REG_CMD_H, cfb);
}
static void
cyber2000fb_copyarea(struct fb_info *info, const struct fb_copyarea *region)
{
struct cfb_info *cfb = (struct cfb_info *)info;
unsigned int cmd = CO_CMD_L_PATTERN_FGCOL;
unsigned long src, dst;
if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) {
cfb_copyarea(info, region);
return;
}
cyber2000fb_writeb(0, CO_REG_CONTROL, cfb);
cyber2000fb_writew(region->width - 1, CO_REG_PIXWIDTH, cfb);
cyber2000fb_writew(region->height - 1, CO_REG_PIXHEIGHT, cfb);
src = region->sx + region->sy * cfb->fb.var.xres_virtual;
dst = region->dx + region->dy * cfb->fb.var.xres_virtual;
if (region->sx < region->dx) {
src += region->width - 1;
dst += region->width - 1;
cmd |= CO_CMD_L_INC_LEFT;
}
if (region->sy < region->dy) {
src += (region->height - 1) * cfb->fb.var.xres_virtual;
dst += (region->height - 1) * cfb->fb.var.xres_virtual;
cmd |= CO_CMD_L_INC_UP;
}
if (cfb->fb.var.bits_per_pixel == 24) {
cyber2000fb_writeb(dst, CO_REG_X_PHASE, cfb);
src *= 3;
dst *= 3;
}
cyber2000fb_writel(src, CO_REG_SRC1_PTR, cfb);
cyber2000fb_writel(dst, CO_REG_DEST_PTR, cfb);
cyber2000fb_writew(CO_FG_MIX_SRC, CO_REG_FGMIX, cfb);
cyber2000fb_writew(cmd, CO_REG_CMD_L, cfb);
cyber2000fb_writew(CO_CMD_H_FGSRCMAP | CO_CMD_H_BLITTER,
CO_REG_CMD_H, cfb);
}
static void
cyber2000fb_imageblit(struct fb_info *info, const struct fb_image *image)
{
// struct cfb_info *cfb = (struct cfb_info *)info;
// if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) {
cfb_imageblit(info, image);
return;
// }
}
static int cyber2000fb_sync(struct fb_info *info)
{
struct cfb_info *cfb = (struct cfb_info *)info;
int count = 100000;
if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT))
return 0;
while (cyber2000fb_readb(CO_REG_CONTROL, cfb) & CO_CTRL_BUSY) {
if (!count--) {
debug_printf("accel_wait timed out\n");
cyber2000fb_writeb(0, CO_REG_CONTROL, cfb);
break;
}
udelay(1);
}
return 0;
}
/*
* ===========================================================================
*/
static inline u32 convert_bitfield(u_int val, struct fb_bitfield *bf)
{
u_int mask = (1 << bf->length) - 1;
return (val >> (16 - bf->length) & mask) << bf->offset;
}
/*
* Set a single color register. Return != 0 for invalid regno.
*/
static int
cyber2000fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
u_int transp, struct fb_info *info)
{
struct cfb_info *cfb = (struct cfb_info *)info;
struct fb_var_screeninfo *var = &cfb->fb.var;
u32 pseudo_val;
int ret = 1;
switch (cfb->fb.fix.visual) {
default:
return 1;
/*
* Pseudocolour:
* 8 8
* pixel --/--+--/--> red lut --> red dac
* | 8
* +--/--> green lut --> green dac
* | 8
* +--/--> blue lut --> blue dac
*/
case FB_VISUAL_PSEUDOCOLOR:
if (regno >= NR_PALETTE)
return 1;
red >>= 8;
green >>= 8;
blue >>= 8;
cfb->palette[regno].red = red;
cfb->palette[regno].green = green;
cfb->palette[regno].blue = blue;
cyber2000fb_writeb(regno, 0x3c8, cfb);
cyber2000fb_writeb(red, 0x3c9, cfb);
cyber2000fb_writeb(green, 0x3c9, cfb);
cyber2000fb_writeb(blue, 0x3c9, cfb);
return 0;
/*
* Direct colour:
* n rl
* pixel --/--+--/--> red lut --> red dac
* | gl
* +--/--> green lut --> green dac
* | bl
* +--/--> blue lut --> blue dac
* n = bpp, rl = red length, gl = green length, bl = blue length
*/
case FB_VISUAL_DIRECTCOLOR:
red >>= 8;
green >>= 8;
blue >>= 8;
if (var->green.length == 6 && regno < 64) {
cfb->palette[regno << 2].green = green;
/*
* The 6 bits of the green component are applied
* to the high 6 bits of the LUT.
*/
cyber2000fb_writeb(regno << 2, 0x3c8, cfb);
cyber2000fb_writeb(cfb->palette[regno >> 1].red, 0x3c9, cfb);
cyber2000fb_writeb(green, 0x3c9, cfb);
cyber2000fb_writeb(cfb->palette[regno >> 1].blue, 0x3c9, cfb);
green = cfb->palette[regno << 3].green;
ret = 0;
}
if (var->green.length >= 5 && regno < 32) {
cfb->palette[regno << 3].red = red;
cfb->palette[regno << 3].green = green;
cfb->palette[regno << 3].blue = blue;
/*
* The 5 bits of each colour component are
* applied to the high 5 bits of the LUT.
*/
cyber2000fb_writeb(regno << 3, 0x3c8, cfb);
cyber2000fb_writeb(red, 0x3c9, cfb);
cyber2000fb_writeb(green, 0x3c9, cfb);
cyber2000fb_writeb(blue, 0x3c9, cfb);
ret = 0;
}
if (var->green.length == 4 && regno < 16) {
cfb->palette[regno << 4].red = red;
cfb->palette[regno << 4].green = green;
cfb->palette[regno << 4].blue = blue;
/*
* The 5 bits of each colour component are
* applied to the high 5 bits of the LUT.
*/
cyber2000fb_writeb(regno << 4, 0x3c8, cfb);
cyber2000fb_writeb(red, 0x3c9, cfb);
cyber2000fb_writeb(green, 0x3c9, cfb);
cyber2000fb_writeb(blue, 0x3c9, cfb);
ret = 0;
}
/*
* Since this is only used for the first 16 colours, we
* don't have to care about overflowing for regno >= 32
*/
pseudo_val = regno << var->red.offset |
regno << var->green.offset |
regno << var->blue.offset;
break;
/*
* True colour:
* n rl
* pixel --/--+--/--> red dac
* | gl
* +--/--> green dac
* | bl
* +--/--> blue dac
* n = bpp, rl = red length, gl = green length, bl = blue length
*/
case FB_VISUAL_TRUECOLOR:
pseudo_val = convert_bitfield(transp ^ 0xffff, &var->transp);
pseudo_val |= convert_bitfield(red, &var->red);
pseudo_val |= convert_bitfield(green, &var->green);
pseudo_val |= convert_bitfield(blue, &var->blue);
break;
}
/*
* Now set our pseudo palette for the CFB16/24/32 drivers.
*/
if (regno < 16)
((u32 *)cfb->fb.pseudo_palette)[regno] = pseudo_val;
return ret;
}
struct par_info {
/*
* Hardware
*/
u_char clock_mult;
u_char clock_div;
u_char extseqmisc;
u_char co_pixfmt;
u_char crtc_ofl;
u_char crtc[19];
u_int width;
u_int pitch;
u_int fetch;
/*
* Other
*/
u_char ramdac;
};
static const u_char crtc_idx[] = {
0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
0x08, 0x09,
0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18
};
static void cyber2000fb_write_ramdac_ctrl(struct cfb_info *cfb)
{
unsigned int i;
unsigned int val = cfb->ramdac_ctrl | cfb->ramdac_powerdown;
cyber2000fb_writeb(0x56, 0x3ce, cfb);
i = cyber2000fb_readb(0x3cf, cfb);
cyber2000fb_writeb(i | 4, 0x3cf, cfb);
cyber2000fb_writeb(val, 0x3c6, cfb);
cyber2000fb_writeb(i, 0x3cf, cfb);
}
static void cyber2000fb_set_timing(struct cfb_info *cfb, struct par_info *hw)
{
u_int i;
/*
* Blank palette
*/
for (i = 0; i < NR_PALETTE; i++) {
cyber2000fb_writeb(i, 0x3c8, cfb);
cyber2000fb_writeb(0, 0x3c9, cfb);
cyber2000fb_writeb(0, 0x3c9, cfb);
cyber2000fb_writeb(0, 0x3c9, cfb);
}
cyber2000fb_writeb(0xef, 0x3c2, cfb);
cyber2000_crtcw(0x11, 0x0b, cfb);
cyber2000_attrw(0x11, 0x00, cfb);
cyber2000_seqw(0x00, 0x01, cfb);
cyber2000_seqw(0x01, 0x01, cfb);
cyber2000_seqw(0x02, 0x0f, cfb);
cyber2000_seqw(0x03, 0x00, cfb);
cyber2000_seqw(0x04, 0x0e, cfb);
cyber2000_seqw(0x00, 0x03, cfb);
for (i = 0; i < sizeof(crtc_idx); i++)
cyber2000_crtcw(crtc_idx[i], hw->crtc[i], cfb);
for (i = 0x0a; i < 0x10; i++)
cyber2000_crtcw(i, 0, cfb);
cyber2000_grphw(EXT_CRT_VRTOFL, hw->crtc_ofl, cfb);
cyber2000_grphw(0x00, 0x00, cfb);
cyber2000_grphw(0x01, 0x00, cfb);
cyber2000_grphw(0x02, 0x00, cfb);
cyber2000_grphw(0x03, 0x00, cfb);
cyber2000_grphw(0x04, 0x00, cfb);
cyber2000_grphw(0x05, 0x60, cfb);
cyber2000_grphw(0x06, 0x05, cfb);
cyber2000_grphw(0x07, 0x0f, cfb);
cyber2000_grphw(0x08, 0xff, cfb);
/* Attribute controller registers */
for (i = 0; i < 16; i++)
cyber2000_attrw(i, i, cfb);
cyber2000_attrw(0x10, 0x01, cfb);
cyber2000_attrw(0x11, 0x00, cfb);
cyber2000_attrw(0x12, 0x0f, cfb);
cyber2000_attrw(0x13, 0x00, cfb);
cyber2000_attrw(0x14, 0x00, cfb);
/* PLL registers */
cyber2000_grphw(EXT_DCLK_MULT, hw->clock_mult, cfb);
cyber2000_grphw(EXT_DCLK_DIV, hw->clock_div, cfb);
cyber2000_grphw(EXT_MCLK_MULT, cfb->mclk_mult, cfb);
cyber2000_grphw(EXT_MCLK_DIV, cfb->mclk_div, cfb);
cyber2000_grphw(0x90, 0x01, cfb);
cyber2000_grphw(0xb9, 0x80, cfb);
cyber2000_grphw(0xb9, 0x00, cfb);
cfb->ramdac_ctrl = hw->ramdac;
cyber2000fb_write_ramdac_ctrl(cfb);
cyber2000fb_writeb(0x20, 0x3c0, cfb);
cyber2000fb_writeb(0xff, 0x3c6, cfb);
cyber2000_grphw(0x14, hw->fetch, cfb);
cyber2000_grphw(0x15, ((hw->fetch >> 8) & 0x03) |
((hw->pitch >> 4) & 0x30), cfb);
cyber2000_grphw(EXT_SEQ_MISC, hw->extseqmisc, cfb);
/*
* Set up accelerator registers
*/
cyber2000fb_writew(hw->width, CO_REG_SRC_WIDTH, cfb);
cyber2000fb_writew(hw->width, CO_REG_DEST_WIDTH, cfb);
cyber2000fb_writeb(hw->co_pixfmt, CO_REG_PIXFMT, cfb);
}
static inline int
cyber2000fb_update_start(struct cfb_info *cfb, struct fb_var_screeninfo *var)
{
u_int base = var->yoffset * var->xres_virtual + var->xoffset;
base *= var->bits_per_pixel;
/*
* Convert to bytes and shift two extra bits because DAC
* can only start on 4 byte aligned data.
*/
base >>= 5;
if (base >= 1 << 20)
return -EINVAL;
cyber2000_grphw(0x10, base >> 16 | 0x10, cfb);
cyber2000_crtcw(0x0c, base >> 8, cfb);
cyber2000_crtcw(0x0d, base, cfb);
return 0;
}
static int
cyber2000fb_decode_crtc(struct par_info *hw, struct cfb_info *cfb,
struct fb_var_screeninfo *var)
{
u_int Htotal, Hblankend, Hsyncend;
u_int Vtotal, Vdispend, Vblankstart, Vblankend, Vsyncstart, Vsyncend;
#define BIT(v,b1,m,b2) (((v >> b1) & m) << b2)
hw->crtc[13] = hw->pitch;
hw->crtc[17] = 0xe3;
hw->crtc[14] = 0;
hw->crtc[8] = 0;
Htotal = var->xres + var->right_margin +
var->hsync_len + var->left_margin;
if (Htotal > 2080)
return -EINVAL;
hw->crtc[0] = (Htotal >> 3) - 5;
hw->crtc[1] = (var->xres >> 3) - 1;
hw->crtc[2] = var->xres >> 3;
hw->crtc[4] = (var->xres + var->right_margin) >> 3;
Hblankend = (Htotal - 4*8) >> 3;
hw->crtc[3] = BIT(Hblankend, 0, 0x1f, 0) |
BIT(1, 0, 0x01, 7);
Hsyncend = (var->xres + var->right_margin + var->hsync_len) >> 3;
hw->crtc[5] = BIT(Hsyncend, 0, 0x1f, 0) |
BIT(Hblankend, 5, 0x01, 7);
Vdispend = var->yres - 1;
Vsyncstart = var->yres + var->lower_margin;
Vsyncend = var->yres + var->lower_margin + var->vsync_len;
Vtotal = var->yres + var->lower_margin + var->vsync_len +
var->upper_margin - 2;
if (Vtotal > 2047)
return -EINVAL;
Vblankstart = var->yres + 6;
Vblankend = Vtotal - 10;
hw->crtc[6] = Vtotal;
hw->crtc[7] = BIT(Vtotal, 8, 0x01, 0) |
BIT(Vdispend, 8, 0x01, 1) |
BIT(Vsyncstart, 8, 0x01, 2) |
BIT(Vblankstart,8, 0x01, 3) |
BIT(1, 0, 0x01, 4) |
BIT(Vtotal, 9, 0x01, 5) |
BIT(Vdispend, 9, 0x01, 6) |
BIT(Vsyncstart, 9, 0x01, 7);
hw->crtc[9] = BIT(0, 0, 0x1f, 0) |
BIT(Vblankstart,9, 0x01, 5) |
BIT(1, 0, 0x01, 6);
hw->crtc[10] = Vsyncstart;
hw->crtc[11] = BIT(Vsyncend, 0, 0x0f, 0) |
BIT(1, 0, 0x01, 7);
hw->crtc[12] = Vdispend;
hw->crtc[15] = Vblankstart;
hw->crtc[16] = Vblankend;
hw->crtc[18] = 0xff;
/*
* overflow - graphics reg 0x11
* 0=VTOTAL:10 1=VDEND:10 2=VRSTART:10 3=VBSTART:10
* 4=LINECOMP:10 5-IVIDEO 6=FIXCNT
*/
hw->crtc_ofl =
BIT(Vtotal, 10, 0x01, 0) |
BIT(Vdispend, 10, 0x01, 1) |
BIT(Vsyncstart, 10, 0x01, 2) |
BIT(Vblankstart,10, 0x01, 3) |
EXT_CRT_VRTOFL_LINECOMP10;
/* woody: set the interlaced bit... */
/* FIXME: what about doublescan? */
if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED)
hw->crtc_ofl |= EXT_CRT_VRTOFL_INTERLACE;
return 0;
}
/*
* The following was discovered by a good monitor, bit twiddling, theorising
* and but mostly luck. Strangely, it looks like everyone elses' PLL!
*
* Clock registers:
* fclock = fpll / div2
* fpll = fref * mult / div1
* where:
* fref = 14.318MHz (69842ps)
* mult = reg0xb0.7:0
* div1 = (reg0xb1.5:0 + 1)
* div2 = 2^(reg0xb1.7:6)
* fpll should be between 115 and 260 MHz
* (8696ps and 3846ps)
*/
static int
cyber2000fb_decode_clock(struct par_info *hw, struct cfb_info *cfb,
struct fb_var_screeninfo *var)
{
u_long pll_ps = var->pixclock;
const u_long ref_ps = cfb->ref_ps;
u_int div2, t_div1, best_div1, best_mult;
int best_diff;
int vco;
/*
* Step 1:
* find div2 such that 115MHz < fpll < 260MHz
* and 0 <= div2 < 4
*/
for (div2 = 0; div2 < 4; div2++) {
u_long new_pll;
new_pll = pll_ps / cfb->divisors[div2];
if (8696 > new_pll && new_pll > 3846) {
pll_ps = new_pll;
break;
}
}
if (div2 == 4)
return -EINVAL;
/*
* Step 2:
* Given pll_ps and ref_ps, find:
* pll_ps * 0.995 < pll_ps_calc < pll_ps * 1.005
* where { 1 < best_div1 < 32, 1 < best_mult < 256 }
* pll_ps_calc = best_div1 / (ref_ps * best_mult)
*/
best_diff = 0x7fffffff;
best_mult = 32;
best_div1 = 255;
for (t_div1 = 32; t_div1 > 1; t_div1 -= 1) {
u_int rr, t_mult, t_pll_ps;
int diff;
/*
* Find the multiplier for this divisor
*/
rr = ref_ps * t_div1;
t_mult = (rr + pll_ps / 2) / pll_ps;
/*
* Is the multiplier within the correct range?
*/
if (t_mult > 256 || t_mult < 2)
continue;
/*
* Calculate the actual clock period from this multiplier
* and divisor, and estimate the error.
*/
t_pll_ps = (rr + t_mult / 2) / t_mult;
diff = pll_ps - t_pll_ps;
if (diff < 0)
diff = -diff;
if (diff < best_diff) {
best_diff = diff;
best_mult = t_mult;
best_div1 = t_div1;
}
/*
* If we hit an exact value, there is no point in continuing.
*/
if (diff == 0)
break;
}
/*
* Step 3:
* combine values
*/
hw->clock_mult = best_mult - 1;
hw->clock_div = div2 << 6 | (best_div1 - 1);
vco = ref_ps * best_div1 / best_mult;
if ((ref_ps == 40690) && (vco < 5556))
/* Set VFSEL when VCO > 180MHz (5.556 ps). */
hw->clock_div |= EXT_DCLK_DIV_VFSEL;
return 0;
}
/*
* Set the User Defined Part of the Display
*/
static int
cyber2000fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
struct cfb_info *cfb = (struct cfb_info *)info;
struct par_info hw;
unsigned int mem;
int err;
var->transp.msb_right = 0;
var->red.msb_right = 0;
var->green.msb_right = 0;
var->blue.msb_right = 0;
switch (var->bits_per_pixel) {
case 8: /* PSEUDOCOLOUR, 256 */
var->transp.offset = 0;
var->transp.length = 0;
var->red.offset = 0;
var->red.length = 8;
var->green.offset = 0;
var->green.length = 8;
var->blue.offset = 0;
var->blue.length = 8;
break;
case 16:/* DIRECTCOLOUR, 64k or 32k */
switch (var->green.length) {
case 6: /* RGB565, 64k */
var->transp.offset = 0;
var->transp.length = 0;
var->red.offset = 11;
var->red.length = 5;
var->green.offset = 5;
var->green.length = 6;
var->blue.offset = 0;
var->blue.length = 5;
break;
default:
case 5: /* RGB555, 32k */
var->transp.offset = 0;
var->transp.length = 0;
var->red.offset = 10;
var->red.length = 5;
var->green.offset = 5;
var->green.length = 5;
var->blue.offset = 0;
var->blue.length = 5;
break;
case 4: /* RGB444, 4k + transparency? */
var->transp.offset = 12;
var->transp.length = 4;
var->red.offset = 8;
var->red.length = 4;
var->green.offset = 4;
var->green.length = 4;
var->blue.offset = 0;
var->blue.length = 4;
break;
}
break;
case 24:/* TRUECOLOUR, 16m */
var->transp.offset = 0;
var->transp.length = 0;
var->red.offset = 16;
var->red.length = 8;
var->green.offset = 8;
var->green.length = 8;
var->blue.offset = 0;
var->blue.length = 8;
break;
case 32:/* TRUECOLOUR, 16m */
var->transp.offset = 24;
var->transp.length = 8;
var->red.offset = 16;
var->red.length = 8;
var->green.offset = 8;
var->green.length = 8;
var->blue.offset = 0;
var->blue.length = 8;
break;
default:
return -EINVAL;
}
mem = var->xres_virtual * var->yres_virtual * (var->bits_per_pixel / 8);
if (mem > cfb->fb.fix.smem_len)
var->yres_virtual = cfb->fb.fix.smem_len * 8 /
(var->bits_per_pixel * var->xres_virtual);
if (var->yres > var->yres_virtual)
var->yres = var->yres_virtual;
if (var->xres > var->xres_virtual)
var->xres = var->xres_virtual;
err = cyber2000fb_decode_clock(&hw, cfb, var);
if (err)
return err;
err = cyber2000fb_decode_crtc(&hw, cfb, var);
if (err)
return err;
return 0;
}
static int cyber2000fb_set_par(struct fb_info *info)
{
struct cfb_info *cfb = (struct cfb_info *)info;
struct fb_var_screeninfo *var = &cfb->fb.var;
struct par_info hw;
unsigned int mem;
hw.width = var->xres_virtual;
hw.ramdac = RAMDAC_VREFEN | RAMDAC_DAC8BIT;
switch (var->bits_per_pixel) {
case 8:
hw.co_pixfmt = CO_PIXFMT_8BPP;
hw.pitch = hw.width >> 3;
hw.extseqmisc = EXT_SEQ_MISC_8;
break;
case 16:
hw.co_pixfmt = CO_PIXFMT_16BPP;
hw.pitch = hw.width >> 2;
switch (var->green.length) {
case 6: /* RGB565, 64k */
hw.extseqmisc = EXT_SEQ_MISC_16_RGB565;
break;
case 5: /* RGB555, 32k */
hw.extseqmisc = EXT_SEQ_MISC_16_RGB555;
break;
case 4: /* RGB444, 4k + transparency? */
hw.extseqmisc = EXT_SEQ_MISC_16_RGB444;
break;
default:
BUG();
}
case 24:/* TRUECOLOUR, 16m */
hw.co_pixfmt = CO_PIXFMT_24BPP;
hw.width *= 3;
hw.pitch = hw.width >> 3;
hw.ramdac |= (RAMDAC_BYPASS | RAMDAC_RAMPWRDN);
hw.extseqmisc = EXT_SEQ_MISC_24_RGB888;
break;
case 32:/* TRUECOLOUR, 16m */
hw.co_pixfmt = CO_PIXFMT_32BPP;
hw.pitch = hw.width >> 1;
hw.ramdac |= (RAMDAC_BYPASS | RAMDAC_RAMPWRDN);
hw.extseqmisc = EXT_SEQ_MISC_32;
break;
default:
BUG();
}
/*
* Sigh, this is absolutely disgusting, but caused by
* the way the fbcon developers want to separate out
* the "checking" and the "setting" of the video mode.
*
* If the mode is not suitable for the hardware here,
* we can't prevent it being set by returning an error.
*
* In theory, since NetWinders contain just one VGA card,
* we should never end up hitting this problem.
*/
BUG_ON(cyber2000fb_decode_clock(&hw, cfb, var) != 0);
BUG_ON(cyber2000fb_decode_crtc(&hw, cfb, var) != 0);
hw.width -= 1;
hw.fetch = hw.pitch;
if (!(cfb->mem_ctl2 & MEM_CTL2_64BIT))
hw.fetch <<= 1;
hw.fetch += 1;
cfb->fb.fix.line_length = var->xres_virtual * var->bits_per_pixel / 8;
/*
* Same here - if the size of the video mode exceeds the
* available RAM, we can't prevent this mode being set.
*
* In theory, since NetWinders contain just one VGA card,
* we should never end up hitting this problem.
*/
mem = cfb->fb.fix.line_length * var->yres_virtual;
BUG_ON(mem > cfb->fb.fix.smem_len);
/*
* 8bpp displays are always pseudo colour. 16bpp and above
* are direct colour or true colour, depending on whether
* the RAMDAC palettes are bypassed. (Direct colour has
* palettes, true colour does not.)
*/
if (var->bits_per_pixel == 8)
cfb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
else if (hw.ramdac & RAMDAC_BYPASS)
cfb->fb.fix.visual = FB_VISUAL_TRUECOLOR;
else
cfb->fb.fix.visual = FB_VISUAL_DIRECTCOLOR;
cyber2000fb_set_timing(cfb, &hw);
cyber2000fb_update_start(cfb, var);
return 0;
}
/*
* Pan or Wrap the Display
*/
static int
cyber2000fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
{
struct cfb_info *cfb = (struct cfb_info *)info;
if (cyber2000fb_update_start(cfb, var))
return -EINVAL;
cfb->fb.var.xoffset = var->xoffset;
cfb->fb.var.yoffset = var->yoffset;
if (var->vmode & FB_VMODE_YWRAP) {
cfb->fb.var.vmode |= FB_VMODE_YWRAP;
} else {
cfb->fb.var.vmode &= ~FB_VMODE_YWRAP;
}
return 0;
}
/*
* (Un)Blank the display.
*
* Blank the screen if blank_mode != 0, else unblank. If
* blank == NULL then the caller blanks by setting the CLUT
* (Color Look Up Table) to all black. Return 0 if blanking
* succeeded, != 0 if un-/blanking failed due to e.g. a
* video mode which doesn't support it. Implements VESA
* suspend and powerdown modes on hardware that supports
* disabling hsync/vsync:
* blank_mode == 2: suspend vsync
* blank_mode == 3: suspend hsync
* blank_mode == 4: powerdown
*
* wms...Enable VESA DMPS compatible powerdown mode
* run "setterm -powersave powerdown" to take advantage
*/
static int cyber2000fb_blank(int blank, struct fb_info *info)
{
struct cfb_info *cfb = (struct cfb_info *)info;
unsigned int sync = 0;
int i;
switch (blank) {
case FB_BLANK_POWERDOWN: /* powerdown - both sync lines down */
sync = EXT_SYNC_CTL_VS_0 | EXT_SYNC_CTL_HS_0;
break;
case FB_BLANK_HSYNC_SUSPEND: /* hsync off */
sync = EXT_SYNC_CTL_VS_NORMAL | EXT_SYNC_CTL_HS_0;
break;
case FB_BLANK_VSYNC_SUSPEND: /* vsync off */
sync = EXT_SYNC_CTL_VS_0 | EXT_SYNC_CTL_HS_NORMAL;
break;
case FB_BLANK_NORMAL: /* soft blank */
default: /* unblank */
break;
}
cyber2000_grphw(EXT_SYNC_CTL, sync, cfb);
if (blank <= 1) {
/* turn on ramdacs */
cfb->ramdac_powerdown &= ~(RAMDAC_DACPWRDN | RAMDAC_BYPASS | RAMDAC_RAMPWRDN);
cyber2000fb_write_ramdac_ctrl(cfb);
}
/*
* Soft blank/unblank the display.
*/
if (blank) { /* soft blank */
for (i = 0; i < NR_PALETTE; i++) {
cyber2000fb_writeb(i, 0x3c8, cfb);
cyber2000fb_writeb(0, 0x3c9, cfb);
cyber2000fb_writeb(0, 0x3c9, cfb);
cyber2000fb_writeb(0, 0x3c9, cfb);
}
} else { /* unblank */
for (i = 0; i < NR_PALETTE; i++) {
cyber2000fb_writeb(i, 0x3c8, cfb);
cyber2000fb_writeb(cfb->palette[i].red, 0x3c9, cfb);
cyber2000fb_writeb(cfb->palette[i].green, 0x3c9, cfb);
cyber2000fb_writeb(cfb->palette[i].blue, 0x3c9, cfb);
}
}
if (blank >= 2) {
/* turn off ramdacs */
cfb->ramdac_powerdown |= RAMDAC_DACPWRDN | RAMDAC_BYPASS | RAMDAC_RAMPWRDN;
cyber2000fb_write_ramdac_ctrl(cfb);
}
return 0;
}
static struct fb_ops cyber2000fb_ops = {
.owner = THIS_MODULE,
.fb_check_var = cyber2000fb_check_var,
.fb_set_par = cyber2000fb_set_par,
.fb_setcolreg = cyber2000fb_setcolreg,
.fb_blank = cyber2000fb_blank,
.fb_pan_display = cyber2000fb_pan_display,
.fb_fillrect = cyber2000fb_fillrect,
.fb_copyarea = cyber2000fb_copyarea,
.fb_imageblit = cyber2000fb_imageblit,
.fb_sync = cyber2000fb_sync,
};
/*
* This is the only "static" reference to the internal data structures
* of this driver. It is here solely at the moment to support the other
* CyberPro modules external to this driver.
*/
static struct cfb_info *int_cfb_info;
/*
* Enable access to the extended registers
*/
void cyber2000fb_enable_extregs(struct cfb_info *cfb)
{
cfb->func_use_count += 1;
if (cfb->func_use_count == 1) {
int old;
old = cyber2000_grphr(EXT_FUNC_CTL, cfb);
old |= EXT_FUNC_CTL_EXTREGENBL;
cyber2000_grphw(EXT_FUNC_CTL, old, cfb);
}
}
/*
* Disable access to the extended registers
*/
void cyber2000fb_disable_extregs(struct cfb_info *cfb)
{
if (cfb->func_use_count == 1) {
int old;
old = cyber2000_grphr(EXT_FUNC_CTL, cfb);
old &= ~EXT_FUNC_CTL_EXTREGENBL;
cyber2000_grphw(EXT_FUNC_CTL, old, cfb);
}
if (cfb->func_use_count == 0)
printk(KERN_ERR "disable_extregs: count = 0\n");
else
cfb->func_use_count -= 1;
}
void cyber2000fb_get_fb_var(struct cfb_info *cfb, struct fb_var_screeninfo *var)
{
memcpy(var, &cfb->fb.var, sizeof(struct fb_var_screeninfo));
}
/*
* Attach a capture/tv driver to the core CyberX0X0 driver.
*/
int cyber2000fb_attach(struct cyberpro_info *info, int idx)
{
if (int_cfb_info != NULL) {
info->dev = int_cfb_info->dev;
info->regs = int_cfb_info->regs;
info->fb = int_cfb_info->fb.screen_base;
info->fb_size = int_cfb_info->fb.fix.smem_len;
info->enable_extregs = cyber2000fb_enable_extregs;
info->disable_extregs = cyber2000fb_disable_extregs;
info->info = int_cfb_info;
strlcpy(info->dev_name, int_cfb_info->fb.fix.id, sizeof(info->dev_name));
}
return int_cfb_info != NULL;
}
/*
* Detach a capture/tv driver from the core CyberX0X0 driver.
*/
void cyber2000fb_detach(int idx)
{
}
EXPORT_SYMBOL(cyber2000fb_attach);
EXPORT_SYMBOL(cyber2000fb_detach);
EXPORT_SYMBOL(cyber2000fb_enable_extregs);
EXPORT_SYMBOL(cyber2000fb_disable_extregs);
EXPORT_SYMBOL(cyber2000fb_get_fb_var);
/*
* These parameters give
* 640x480, hsync 31.5kHz, vsync 60Hz
*/
static struct fb_videomode __devinitdata cyber2000fb_default_mode = {
.refresh = 60,
.xres = 640,
.yres = 480,
.pixclock = 39722,
.left_margin = 56,
.right_margin = 16,
.upper_margin = 34,
.lower_margin = 9,
.hsync_len = 88,
.vsync_len = 2,
.sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED
};
static char igs_regs[] = {
EXT_CRT_IRQ, 0,
EXT_CRT_TEST, 0,
EXT_SYNC_CTL, 0,
EXT_SEG_WRITE_PTR, 0,
EXT_SEG_READ_PTR, 0,
EXT_BIU_MISC, EXT_BIU_MISC_LIN_ENABLE |
EXT_BIU_MISC_COP_ENABLE |
EXT_BIU_MISC_COP_BFC,
EXT_FUNC_CTL, 0,
CURS_H_START, 0,
CURS_H_START + 1, 0,
CURS_H_PRESET, 0,
CURS_V_START, 0,
CURS_V_START + 1, 0,
CURS_V_PRESET, 0,
CURS_CTL, 0,
EXT_ATTRIB_CTL, EXT_ATTRIB_CTL_EXT,
EXT_OVERSCAN_RED, 0,
EXT_OVERSCAN_GREEN, 0,
EXT_OVERSCAN_BLUE, 0,
/* some of these are questionable when we have a BIOS */
EXT_MEM_CTL0, EXT_MEM_CTL0_7CLK |
EXT_MEM_CTL0_RAS_1 |
EXT_MEM_CTL0_MULTCAS,
EXT_HIDDEN_CTL1, 0x30,
EXT_FIFO_CTL, 0x0b,
EXT_FIFO_CTL + 1, 0x17,
0x76, 0x00,
EXT_HIDDEN_CTL4, 0xc8
};
/*
* Initialise the CyberPro hardware. On the CyberPro5XXXX,
* ensure that we're using the correct PLL (5XXX's may be
* programmed to use an additional set of PLLs.)
*/
static void cyberpro_init_hw(struct cfb_info *cfb)
{
int i;
for (i = 0; i < sizeof(igs_regs); i += 2)
cyber2000_grphw(igs_regs[i], igs_regs[i+1], cfb);
if (cfb->id == ID_CYBERPRO_5000) {
unsigned char val;
cyber2000fb_writeb(0xba, 0x3ce, cfb);
val = cyber2000fb_readb(0x3cf, cfb) & 0x80;
cyber2000fb_writeb(val, 0x3cf, cfb);
}
}
static struct cfb_info * __devinit
cyberpro_alloc_fb_info(unsigned int id, char *name)
{
struct cfb_info *cfb;
cfb = kmalloc(sizeof(struct cfb_info), GFP_KERNEL);
if (!cfb)
return NULL;
memset(cfb, 0, sizeof(struct cfb_info));
cfb->id = id;
if (id == ID_CYBERPRO_5000)
cfb->ref_ps = 40690; // 24.576 MHz
else
cfb->ref_ps = 69842; // 14.31818 MHz (69841?)
cfb->divisors[0] = 1;
cfb->divisors[1] = 2;
cfb->divisors[2] = 4;
if (id == ID_CYBERPRO_2000)
cfb->divisors[3] = 8;
else
cfb->divisors[3] = 6;
strcpy(cfb->fb.fix.id, name);
cfb->fb.fix.type = FB_TYPE_PACKED_PIXELS;
cfb->fb.fix.type_aux = 0;
cfb->fb.fix.xpanstep = 0;
cfb->fb.fix.ypanstep = 1;
cfb->fb.fix.ywrapstep = 0;
switch (id) {
case ID_IGA_1682:
cfb->fb.fix.accel = 0;
break;
case ID_CYBERPRO_2000:
cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER2000;
break;
case ID_CYBERPRO_2010:
cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER2010;
break;
case ID_CYBERPRO_5000:
cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER5000;
break;
}
cfb->fb.var.nonstd = 0;
cfb->fb.var.activate = FB_ACTIVATE_NOW;
cfb->fb.var.height = -1;
cfb->fb.var.width = -1;
cfb->fb.var.accel_flags = FB_ACCELF_TEXT;
cfb->fb.fbops = &cyber2000fb_ops;
cfb->fb.flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
cfb->fb.pseudo_palette = cfb->pseudo_palette;
fb_alloc_cmap(&cfb->fb.cmap, NR_PALETTE, 0);
return cfb;
}
static void
cyberpro_free_fb_info(struct cfb_info *cfb)
{
if (cfb) {
/*
* Free the colourmap
*/
fb_alloc_cmap(&cfb->fb.cmap, 0, 0);
kfree(cfb);
}
}
/*
* Parse Cyber2000fb options. Usage:
* video=cyber2000:font:fontname
*/
#ifndef MODULE
static int
cyber2000fb_setup(char *options)
{
char *opt;
if (!options || !*options)
return 0;
while ((opt = strsep(&options, ",")) != NULL) {
if (!*opt)
continue;
if (strncmp(opt, "font:", 5) == 0) {
static char default_font_storage[40];
strlcpy(default_font_storage, opt + 5, sizeof(default_font_storage));
default_font = default_font_storage;
continue;
}
printk(KERN_ERR "CyberPro20x0: unknown parameter: %s\n", opt);
}
return 0;
}
#endif /* MODULE */
/*
* The CyberPro chips can be placed on many different bus types.
* This probe function is common to all bus types. The bus-specific
* probe function is expected to have:
* - enabled access to the linear memory region
* - memory mapped access to the registers
* - initialised mem_ctl1 and mem_ctl2 appropriately.
*/
static int __devinit cyberpro_common_probe(struct cfb_info *cfb)
{
u_long smem_size;
u_int h_sync, v_sync;
int err;
cyberpro_init_hw(cfb);
/*
* Get the video RAM size and width from the VGA register.
* This should have been already initialised by the BIOS,
* but if it's garbage, claim default 1MB VRAM (woody)
*/
cfb->mem_ctl1 = cyber2000_grphr(EXT_MEM_CTL1, cfb);
cfb->mem_ctl2 = cyber2000_grphr(EXT_MEM_CTL2, cfb);
/*
* Determine the size of the memory.
*/
switch (cfb->mem_ctl2 & MEM_CTL2_SIZE_MASK) {
case MEM_CTL2_SIZE_4MB: smem_size = 0x00400000; break;
case MEM_CTL2_SIZE_2MB: smem_size = 0x00200000; break;
case MEM_CTL2_SIZE_1MB: smem_size = 0x00100000; break;
default: smem_size = 0x00100000; break;
}
cfb->fb.fix.smem_len = smem_size;
cfb->fb.fix.mmio_len = MMIO_SIZE;
cfb->fb.screen_base = cfb->region;
err = -EINVAL;
if (!fb_find_mode(&cfb->fb.var, &cfb->fb, NULL, NULL, 0,
&cyber2000fb_default_mode, 8)) {
printk("%s: no valid mode found\n", cfb->fb.fix.id);
goto failed;
}
cfb->fb.var.yres_virtual = cfb->fb.fix.smem_len * 8 /
(cfb->fb.var.bits_per_pixel * cfb->fb.var.xres_virtual);
if (cfb->fb.var.yres_virtual < cfb->fb.var.yres)
cfb->fb.var.yres_virtual = cfb->fb.var.yres;
// fb_set_var(&cfb->fb.var, -1, &cfb->fb);
/*
* Calculate the hsync and vsync frequencies. Note that
* we split the 1e12 constant up so that we can preserve
* the precision and fit the results into 32-bit registers.
* (1953125000 * 512 = 1e12)
*/
h_sync = 1953125000 / cfb->fb.var.pixclock;
h_sync = h_sync * 512 / (cfb->fb.var.xres + cfb->fb.var.left_margin +
cfb->fb.var.right_margin + cfb->fb.var.hsync_len);
v_sync = h_sync / (cfb->fb.var.yres + cfb->fb.var.upper_margin +
cfb->fb.var.lower_margin + cfb->fb.var.vsync_len);
printk(KERN_INFO "%s: %dKiB VRAM, using %dx%d, %d.%03dkHz, %dHz\n",
cfb->fb.fix.id, cfb->fb.fix.smem_len >> 10,
cfb->fb.var.xres, cfb->fb.var.yres,
h_sync / 1000, h_sync % 1000, v_sync);
if (cfb->dev)
cfb->fb.device = &cfb->dev->dev;
err = register_framebuffer(&cfb->fb);
failed:
return err;
}
static void cyberpro_common_resume(struct cfb_info *cfb)
{
cyberpro_init_hw(cfb);
/*
* Reprogram the MEM_CTL1 and MEM_CTL2 registers
*/
cyber2000_grphw(EXT_MEM_CTL1, cfb->mem_ctl1, cfb);
cyber2000_grphw(EXT_MEM_CTL2, cfb->mem_ctl2, cfb);
/*
* Restore the old video mode and the palette.
* We also need to tell fbcon to redraw the console.
*/
cyber2000fb_set_par(&cfb->fb);
}
#ifdef CONFIG_ARCH_SHARK
#include <asm/arch/hardware.h>
static int __devinit
cyberpro_vl_probe(void)
{
struct cfb_info *cfb;
int err = -ENOMEM;
if (!request_mem_region(FB_START,FB_SIZE,"CyberPro2010")) return err;
cfb = cyberpro_alloc_fb_info(ID_CYBERPRO_2010, "CyberPro2010");
if (!cfb)
goto failed_release;
cfb->dev = NULL;
cfb->region = ioremap(FB_START,FB_SIZE);
if (!cfb->region)
goto failed_ioremap;
cfb->regs = cfb->region + MMIO_OFFSET;
cfb->fb.fix.mmio_start = FB_START + MMIO_OFFSET;
cfb->fb.fix.smem_start = FB_START;
/*
* Bring up the hardware. This is expected to enable access
* to the linear memory region, and allow access to the memory
* mapped registers. Also, mem_ctl1 and mem_ctl2 must be
* initialised.
*/
cyber2000fb_writeb(0x18, 0x46e8, cfb);
cyber2000fb_writeb(0x01, 0x102, cfb);
cyber2000fb_writeb(0x08, 0x46e8, cfb);
cyber2000fb_writeb(EXT_BIU_MISC, 0x3ce, cfb);
cyber2000fb_writeb(EXT_BIU_MISC_LIN_ENABLE, 0x3cf, cfb);
cfb->mclk_mult = 0xdb;
cfb->mclk_div = 0x54;
err = cyberpro_common_probe(cfb);
if (err)
goto failed;
if (int_cfb_info == NULL)
int_cfb_info = cfb;
return 0;
failed:
iounmap(cfb->region);
failed_ioremap:
cyberpro_free_fb_info(cfb);
failed_release:
release_mem_region(FB_START,FB_SIZE);
return err;
}
#endif /* CONFIG_ARCH_SHARK */
/*
* PCI specific support.
*/
#ifdef CONFIG_PCI
/*
* We need to wake up the CyberPro, and make sure its in linear memory
* mode. Unfortunately, this is specific to the platform and card that
* we are running on.
*
* On x86 and ARM, should we be initialising the CyberPro first via the
* IO registers, and then the MMIO registers to catch all cases? Can we
* end up in the situation where the chip is in MMIO mode, but not awake
* on an x86 system?
*/
static int cyberpro_pci_enable_mmio(struct cfb_info *cfb)
{
unsigned char val;
#if defined(__sparc_v9__)
#error "You lose, consult DaveM."
#elif defined(__sparc__)
/*
* SPARC does not have an "outb" instruction, so we generate
* I/O cycles storing into a reserved memory space at
* physical address 0x3000000
*/
unsigned char __iomem *iop;
iop = ioremap(0x3000000, 0x5000);
if (iop == NULL) {
prom_printf("iga5000: cannot map I/O\n");
return -ENOMEM;
}
writeb(0x18, iop + 0x46e8);
writeb(0x01, iop + 0x102);
writeb(0x08, iop + 0x46e8);
writeb(EXT_BIU_MISC, iop + 0x3ce);
writeb(EXT_BIU_MISC_LIN_ENABLE, iop + 0x3cf);
iounmap(iop);
#else
/*
* Most other machine types are "normal", so
* we use the standard IO-based wakeup.
*/
outb(0x18, 0x46e8);
outb(0x01, 0x102);
outb(0x08, 0x46e8);
outb(EXT_BIU_MISC, 0x3ce);
outb(EXT_BIU_MISC_LIN_ENABLE, 0x3cf);
#endif
/*
* Allow the CyberPro to accept PCI burst accesses
*/
if (cfb->id == ID_CYBERPRO_2010) {
printk(KERN_INFO "%s: NOT enabling PCI bursts\n", cfb->fb.fix.id);
} else {
val = cyber2000_grphr(EXT_BUS_CTL, cfb);
if (!(val & EXT_BUS_CTL_PCIBURST_WRITE)) {
printk(KERN_INFO "%s: enabling PCI bursts\n",
cfb->fb.fix.id);
val |= EXT_BUS_CTL_PCIBURST_WRITE;
if (cfb->id == ID_CYBERPRO_5000)
val |= EXT_BUS_CTL_PCIBURST_READ;
cyber2000_grphw(EXT_BUS_CTL, val, cfb);
}
}
return 0;
}
static int __devinit
cyberpro_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
struct cfb_info *cfb;
char name[16];
int err;
sprintf(name, "CyberPro%4X", id->device);
err = pci_enable_device(dev);
if (err)
return err;
err = pci_request_regions(dev, name);
if (err)
return err;
err = -ENOMEM;
cfb = cyberpro_alloc_fb_info(id->driver_data, name);
if (!cfb)
goto failed_release;
cfb->dev = dev;
cfb->region = ioremap(pci_resource_start(dev, 0),
pci_resource_len(dev, 0));
if (!cfb->region)
goto failed_ioremap;
cfb->regs = cfb->region + MMIO_OFFSET;
cfb->fb.fix.mmio_start = pci_resource_start(dev, 0) + MMIO_OFFSET;
cfb->fb.fix.smem_start = pci_resource_start(dev, 0);
/*
* Bring up the hardware. This is expected to enable access
* to the linear memory region, and allow access to the memory
* mapped registers. Also, mem_ctl1 and mem_ctl2 must be
* initialised.
*/
err = cyberpro_pci_enable_mmio(cfb);
if (err)
goto failed;
/*
* Use MCLK from BIOS. FIXME: what about hotplug?
*/
cfb->mclk_mult = cyber2000_grphr(EXT_MCLK_MULT, cfb);
cfb->mclk_div = cyber2000_grphr(EXT_MCLK_DIV, cfb);
#ifdef __arm__
/*
* MCLK on the NetWinder and the Shark is fixed at 75MHz
*/
if (machine_is_netwinder()) {
cfb->mclk_mult = 0xdb;
cfb->mclk_div = 0x54;
}
#endif
err = cyberpro_common_probe(cfb);
if (err)
goto failed;
/*
* Our driver data
*/
pci_set_drvdata(dev, cfb);
if (int_cfb_info == NULL)
int_cfb_info = cfb;
return 0;
failed:
iounmap(cfb->region);
failed_ioremap:
cyberpro_free_fb_info(cfb);
failed_release:
pci_release_regions(dev);
return err;
}
static void __devexit cyberpro_pci_remove(struct pci_dev *dev)
{
struct cfb_info *cfb = pci_get_drvdata(dev);
if (cfb) {
/*
* If unregister_framebuffer fails, then
* we will be leaving hooks that could cause
* oopsen laying around.
*/
if (unregister_framebuffer(&cfb->fb))
printk(KERN_WARNING "%s: danger Will Robinson, "
"danger danger! Oopsen imminent!\n",
cfb->fb.fix.id);
iounmap(cfb->region);
cyberpro_free_fb_info(cfb);
/*
* Ensure that the driver data is no longer
* valid.
*/
pci_set_drvdata(dev, NULL);
if (cfb == int_cfb_info)
int_cfb_info = NULL;
pci_release_regions(dev);
}
}
static int cyberpro_pci_suspend(struct pci_dev *dev, pm_message_t state)
{
return 0;
}
/*
* Re-initialise the CyberPro hardware
*/
static int cyberpro_pci_resume(struct pci_dev *dev)
{
struct cfb_info *cfb = pci_get_drvdata(dev);
if (cfb) {
cyberpro_pci_enable_mmio(cfb);
cyberpro_common_resume(cfb);
}
return 0;
}
static struct pci_device_id cyberpro_pci_table[] = {
// Not yet
// { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_1682,
// PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_IGA_1682 },
{ PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_2000,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_2000 },
{ PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_2010,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_2010 },
{ PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_5000,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_5000 },
{ 0, }
};
MODULE_DEVICE_TABLE(pci,cyberpro_pci_table);
static struct pci_driver cyberpro_driver = {
.name = "CyberPro",
.probe = cyberpro_pci_probe,
.remove = __devexit_p(cyberpro_pci_remove),
.suspend = cyberpro_pci_suspend,
.resume = cyberpro_pci_resume,
.id_table = cyberpro_pci_table
};
#endif
/*
* I don't think we can use the "module_init" stuff here because
* the fbcon stuff may not be initialised yet. Hence the #ifdef
* around module_init.
*
* Tony: "module_init" is now required
*/
static int __init cyber2000fb_init(void)
{
int ret = -1, err;
#ifndef MODULE
char *option = NULL;
if (fb_get_options("cyber2000fb", &option))
return -ENODEV;
cyber2000fb_setup(option);
#endif
#ifdef CONFIG_ARCH_SHARK
err = cyberpro_vl_probe();
if (!err) {
ret = 0;
__module_get(THIS_MODULE);
}
#endif
#ifdef CONFIG_PCI
err = pci_register_driver(&cyberpro_driver);
if (!err)
ret = 0;
#endif
return ret ? err : 0;
}
static void __exit cyberpro_exit(void)
{
pci_unregister_driver(&cyberpro_driver);
}
module_init(cyber2000fb_init);
module_exit(cyberpro_exit);
MODULE_AUTHOR("Russell King");
MODULE_DESCRIPTION("CyberPro 2000, 2010 and 5000 framebuffer driver");
MODULE_LICENSE("GPL");