d0164adc89
__GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
96 lines
5.2 KiB
Plaintext
96 lines
5.2 KiB
Plaintext
Started Jan 2000 by Kanoj Sarcar <kanoj@sgi.com>
|
|
|
|
Memory balancing is needed for !__GFP_ATOMIC and !__GFP_KSWAPD_RECLAIM as
|
|
well as for non __GFP_IO allocations.
|
|
|
|
The first reason why a caller may avoid reclaim is that the caller can not
|
|
sleep due to holding a spinlock or is in interrupt context. The second may
|
|
be that the caller is willing to fail the allocation without incurring the
|
|
overhead of page reclaim. This may happen for opportunistic high-order
|
|
allocation requests that have order-0 fallback options. In such cases,
|
|
the caller may also wish to avoid waking kswapd.
|
|
|
|
__GFP_IO allocation requests are made to prevent file system deadlocks.
|
|
|
|
In the absence of non sleepable allocation requests, it seems detrimental
|
|
to be doing balancing. Page reclamation can be kicked off lazily, that
|
|
is, only when needed (aka zone free memory is 0), instead of making it
|
|
a proactive process.
|
|
|
|
That being said, the kernel should try to fulfill requests for direct
|
|
mapped pages from the direct mapped pool, instead of falling back on
|
|
the dma pool, so as to keep the dma pool filled for dma requests (atomic
|
|
or not). A similar argument applies to highmem and direct mapped pages.
|
|
OTOH, if there is a lot of free dma pages, it is preferable to satisfy
|
|
regular memory requests by allocating one from the dma pool, instead
|
|
of incurring the overhead of regular zone balancing.
|
|
|
|
In 2.2, memory balancing/page reclamation would kick off only when the
|
|
_total_ number of free pages fell below 1/64 th of total memory. With the
|
|
right ratio of dma and regular memory, it is quite possible that balancing
|
|
would not be done even when the dma zone was completely empty. 2.2 has
|
|
been running production machines of varying memory sizes, and seems to be
|
|
doing fine even with the presence of this problem. In 2.3, due to
|
|
HIGHMEM, this problem is aggravated.
|
|
|
|
In 2.3, zone balancing can be done in one of two ways: depending on the
|
|
zone size (and possibly of the size of lower class zones), we can decide
|
|
at init time how many free pages we should aim for while balancing any
|
|
zone. The good part is, while balancing, we do not need to look at sizes
|
|
of lower class zones, the bad part is, we might do too frequent balancing
|
|
due to ignoring possibly lower usage in the lower class zones. Also,
|
|
with a slight change in the allocation routine, it is possible to reduce
|
|
the memclass() macro to be a simple equality.
|
|
|
|
Another possible solution is that we balance only when the free memory
|
|
of a zone _and_ all its lower class zones falls below 1/64th of the
|
|
total memory in the zone and its lower class zones. This fixes the 2.2
|
|
balancing problem, and stays as close to 2.2 behavior as possible. Also,
|
|
the balancing algorithm works the same way on the various architectures,
|
|
which have different numbers and types of zones. If we wanted to get
|
|
fancy, we could assign different weights to free pages in different
|
|
zones in the future.
|
|
|
|
Note that if the size of the regular zone is huge compared to dma zone,
|
|
it becomes less significant to consider the free dma pages while
|
|
deciding whether to balance the regular zone. The first solution
|
|
becomes more attractive then.
|
|
|
|
The appended patch implements the second solution. It also "fixes" two
|
|
problems: first, kswapd is woken up as in 2.2 on low memory conditions
|
|
for non-sleepable allocations. Second, the HIGHMEM zone is also balanced,
|
|
so as to give a fighting chance for replace_with_highmem() to get a
|
|
HIGHMEM page, as well as to ensure that HIGHMEM allocations do not
|
|
fall back into regular zone. This also makes sure that HIGHMEM pages
|
|
are not leaked (for example, in situations where a HIGHMEM page is in
|
|
the swapcache but is not being used by anyone)
|
|
|
|
kswapd also needs to know about the zones it should balance. kswapd is
|
|
primarily needed in a situation where balancing can not be done,
|
|
probably because all allocation requests are coming from intr context
|
|
and all process contexts are sleeping. For 2.3, kswapd does not really
|
|
need to balance the highmem zone, since intr context does not request
|
|
highmem pages. kswapd looks at the zone_wake_kswapd field in the zone
|
|
structure to decide whether a zone needs balancing.
|
|
|
|
Page stealing from process memory and shm is done if stealing the page would
|
|
alleviate memory pressure on any zone in the page's node that has fallen below
|
|
its watermark.
|
|
|
|
watemark[WMARK_MIN/WMARK_LOW/WMARK_HIGH]/low_on_memory/zone_wake_kswapd: These
|
|
are per-zone fields, used to determine when a zone needs to be balanced. When
|
|
the number of pages falls below watermark[WMARK_MIN], the hysteric field
|
|
low_on_memory gets set. This stays set till the number of free pages becomes
|
|
watermark[WMARK_HIGH]. When low_on_memory is set, page allocation requests will
|
|
try to free some pages in the zone (providing GFP_WAIT is set in the request).
|
|
Orthogonal to this, is the decision to poke kswapd to free some zone pages.
|
|
That decision is not hysteresis based, and is done when the number of free
|
|
pages is below watermark[WMARK_LOW]; in which case zone_wake_kswapd is also set.
|
|
|
|
|
|
(Good) Ideas that I have heard:
|
|
1. Dynamic experience should influence balancing: number of failed requests
|
|
for a zone can be tracked and fed into the balancing scheme (jalvo@mbay.net)
|
|
2. Implement a replace_with_highmem()-like replace_with_regular() to preserve
|
|
dma pages. (lkd@tantalophile.demon.co.uk)
|