kernel-ark/drivers/net/chelsio/mv88x201x.c
Scott Bardone 559fb51ba7 Update Chelsio gige net driver.
- Use extern prefix for functions required.
- Removed a lot of wrappers, including t1_read/write_reg_4.
- Removed various macros, using native kernel calls now.
- Enumerated various #defines.
- Removed a lot of shared code which is not currently used in "NIC only" mode.
- Removed dead code.

Documentation/networking/cxgb.txt:
- Updated release notes for version 2.1.1

drivers/net/chelsio/ch_ethtool.h
- removed file, no longer using ETHTOOL namespace.

drivers/net/chelsio/common.h
- moved code from osdep.h to common.h
- added comment to #endif indicating which symbol it closes.

drivers/net/chelsio/cphy.h
- removed dead code.
- added comment to #endif indicating which symbol it closes.

drivers/net/chelsio/cxgb2.c
- use DMA_{32,64}BIT_MASK in include/linux/dma-mapping.h.
- removed unused code.
- use printk message for link info resembling drivers/net/mii.c.
- no longer using the MODULE_xxx namespace.
- no longer using "pci_" namespace.
- no longer using ETHTOOL namespace.

drivers/net/chelsio/cxgb2.h
- removed file, merged into common.h

drivers/net/chelsio/elmer0.h
- removed dead code.
- added various enums.
- added comment to #endif indicating which symbol it closes.

drivers/net/chelsio/espi.c
- removed various macros, using native kernel calls now.
- removed a lot of wrappers, including t1_read/write_reg_4.

drivers/net/chelsio/espi.h
- added comment to #endif indicating which symbol it closes.

drivers/net/chelsio/gmac.h
- added comment to #endif indicating which symbol it closes.

drivers/net/chelsio/mv88x201x.c
- changes to sync with Chelsio TOT.

drivers/net/chelsio/osdep.h
- removed file, consolidation. osdep was used to translate wrapper functions
  since our code supports multiple OSs. removed wrappers.

  drivers/net/chelsio/pm3393.c
  - removed various macros, using native kernel calls now.
  - removed a lot of wrappers, including t1_read/write_reg_4.
  - removed unused code.

  drivers/net/chelsio/regs.h
  - added a few register entries for future and current feature support.
  - added comment to #endif indicating which symbol it closes.

  drivers/net/chelsio/sge.c
  - rewrote large portion of scatter-gather engine to stabilize
  performance.
  - using u8/u16/u32 kernel types instead of __u8/__u16/__u32 compiler
  types.

  drivers/net/chelsio/sge.h
  - rewrote large portion of scatter-gather engine to stabilize
  performance.
  - added comment to #endif indicating which symbol it closes.

  drivers/net/chelsio/subr.c
  - merged tp.c into subr.c
  - removed various macros, using native kernel calls now.
  - removed a lot of wrappers, including t1_read/write_reg_4.
  - removed unused code.

  drivers/net/chelsio/suni1x10gexp_regs.h
  - modified copyright and authorship of file.
  - added comment to #endif indicating which symbol it closes.

  drivers/net/chelsio/tp.c
  - removed file, merged into subr.c.

  drivers/net/chelsio/tp.h
  - removed file.

  include/linux/pci_ids.h
  - patched to include PCI_VENDOR_ID_CHELSIO 0x1425, removed define from
  our code.
2005-06-23 01:40:19 -04:00

253 lines
7.9 KiB
C

/*****************************************************************************
* *
* File: mv88x201x.c *
* $Revision: 1.12 $ *
* $Date: 2005/04/15 19:27:14 $ *
* Description: *
* Marvell PHY (mv88x201x) functionality. *
* part of the Chelsio 10Gb Ethernet Driver. *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License, version 2, as *
* published by the Free Software Foundation. *
* *
* You should have received a copy of the GNU General Public License along *
* with this program; if not, write to the Free Software Foundation, Inc., *
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
* *
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED *
* WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF *
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. *
* *
* http://www.chelsio.com *
* *
* Copyright (c) 2003 - 2005 Chelsio Communications, Inc. *
* All rights reserved. *
* *
* Maintainers: maintainers@chelsio.com *
* *
* Authors: Dimitrios Michailidis <dm@chelsio.com> *
* Tina Yang <tainay@chelsio.com> *
* Felix Marti <felix@chelsio.com> *
* Scott Bardone <sbardone@chelsio.com> *
* Kurt Ottaway <kottaway@chelsio.com> *
* Frank DiMambro <frank@chelsio.com> *
* *
* History: *
* *
****************************************************************************/
#include "cphy.h"
#include "elmer0.h"
/*
* The 88x2010 Rev C. requires some link status registers * to be read
* twice in order to get the right values. Future * revisions will fix
* this problem and then this macro * can disappear.
*/
#define MV88x2010_LINK_STATUS_BUGS 1
static int led_init(struct cphy *cphy)
{
/* Setup the LED registers so we can turn on/off.
* Writing these bits maps control to another
* register. mmd(0x1) addr(0x7)
*/
mdio_write(cphy, 0x3, 0x8304, 0xdddd);
return 0;
}
static int led_link(struct cphy *cphy, u32 do_enable)
{
u32 led = 0;
#define LINK_ENABLE_BIT 0x1
mdio_read(cphy, 0x1, 0x7, &led);
if (do_enable & LINK_ENABLE_BIT) {
led |= LINK_ENABLE_BIT;
mdio_write(cphy, 0x1, 0x7, led);
} else {
led &= ~LINK_ENABLE_BIT;
mdio_write(cphy, 0x1, 0x7, led);
}
return 0;
}
/* Port Reset */
static int mv88x201x_reset(struct cphy *cphy, int wait)
{
/* This can be done through registers. It is not required since
* a full chip reset is used.
*/
return 0;
}
static int mv88x201x_interrupt_enable(struct cphy *cphy)
{
u32 elmer;
/* Enable PHY LASI interrupts. */
mdio_write(cphy, 0x1, 0x9002, 0x1);
/* Enable Marvell interrupts through Elmer0. */
t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
elmer |= ELMER0_GP_BIT6;
t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
return 0;
}
static int mv88x201x_interrupt_disable(struct cphy *cphy)
{
u32 elmer;
/* Disable PHY LASI interrupts. */
mdio_write(cphy, 0x1, 0x9002, 0x0);
/* Disable Marvell interrupts through Elmer0. */
t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
elmer &= ~ELMER0_GP_BIT6;
t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
return 0;
}
static int mv88x201x_interrupt_clear(struct cphy *cphy)
{
u32 elmer;
u32 val;
#ifdef MV88x2010_LINK_STATUS_BUGS
/* Required to read twice before clear takes affect. */
mdio_read(cphy, 0x1, 0x9003, &val);
mdio_read(cphy, 0x1, 0x9004, &val);
mdio_read(cphy, 0x1, 0x9005, &val);
/* Read this register after the others above it else
* the register doesn't clear correctly.
*/
mdio_read(cphy, 0x1, 0x1, &val);
#endif
/* Clear link status. */
mdio_read(cphy, 0x1, 0x1, &val);
/* Clear PHY LASI interrupts. */
mdio_read(cphy, 0x1, 0x9005, &val);
#ifdef MV88x2010_LINK_STATUS_BUGS
/* Do it again. */
mdio_read(cphy, 0x1, 0x9003, &val);
mdio_read(cphy, 0x1, 0x9004, &val);
#endif
/* Clear Marvell interrupts through Elmer0. */
t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer);
elmer |= ELMER0_GP_BIT6;
t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer);
return 0;
}
static int mv88x201x_interrupt_handler(struct cphy *cphy)
{
/* Clear interrupts */
mv88x201x_interrupt_clear(cphy);
/* We have only enabled link change interrupts and so
* cphy_cause must be a link change interrupt.
*/
return cphy_cause_link_change;
}
static int mv88x201x_set_loopback(struct cphy *cphy, int on)
{
return 0;
}
static int mv88x201x_get_link_status(struct cphy *cphy, int *link_ok,
int *speed, int *duplex, int *fc)
{
u32 val = 0;
#define LINK_STATUS_BIT 0x4
if (link_ok) {
/* Read link status. */
mdio_read(cphy, 0x1, 0x1, &val);
val &= LINK_STATUS_BIT;
*link_ok = (val == LINK_STATUS_BIT);
/* Turn on/off Link LED */
led_link(cphy, *link_ok);
}
if (speed)
*speed = SPEED_10000;
if (duplex)
*duplex = DUPLEX_FULL;
if (fc)
*fc = PAUSE_RX | PAUSE_TX;
return 0;
}
static void mv88x201x_destroy(struct cphy *cphy)
{
kfree(cphy);
}
static struct cphy_ops mv88x201x_ops = {
.destroy = mv88x201x_destroy,
.reset = mv88x201x_reset,
.interrupt_enable = mv88x201x_interrupt_enable,
.interrupt_disable = mv88x201x_interrupt_disable,
.interrupt_clear = mv88x201x_interrupt_clear,
.interrupt_handler = mv88x201x_interrupt_handler,
.get_link_status = mv88x201x_get_link_status,
.set_loopback = mv88x201x_set_loopback,
};
static struct cphy *mv88x201x_phy_create(adapter_t *adapter, int phy_addr,
struct mdio_ops *mdio_ops)
{
u32 val;
struct cphy *cphy = kmalloc(sizeof(*cphy), GFP_KERNEL);
if (!cphy)
return NULL;
memset(cphy, 0, sizeof(*cphy));
cphy_init(cphy, adapter, phy_addr, &mv88x201x_ops, mdio_ops);
/* Commands the PHY to enable XFP's clock. */
mdio_read(cphy, 0x3, 0x8300, &val);
mdio_write(cphy, 0x3, 0x8300, val | 1);
/* Clear link status. Required because of a bug in the PHY. */
mdio_read(cphy, 0x1, 0x8, &val);
mdio_read(cphy, 0x3, 0x8, &val);
/* Allows for Link,Ack LED turn on/off */
led_init(cphy);
return cphy;
}
/* Chip Reset */
static int mv88x201x_phy_reset(adapter_t *adapter)
{
u32 val;
t1_tpi_read(adapter, A_ELMER0_GPO, &val);
val &= ~4;
t1_tpi_write(adapter, A_ELMER0_GPO, val);
msleep(100);
t1_tpi_write(adapter, A_ELMER0_GPO, val | 4);
msleep(1000);
/* Now lets enable the Laser. Delay 100us */
t1_tpi_read(adapter, A_ELMER0_GPO, &val);
val |= 0x8000;
t1_tpi_write(adapter, A_ELMER0_GPO, val);
udelay(100);
return 0;
}
struct gphy t1_mv88x201x_ops = {
mv88x201x_phy_create,
mv88x201x_phy_reset
};