kernel-ark/drivers/misc/sgi-xp/xpc_main.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

1345 lines
36 KiB
C

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (c) 2004-2009 Silicon Graphics, Inc. All Rights Reserved.
*/
/*
* Cross Partition Communication (XPC) support - standard version.
*
* XPC provides a message passing capability that crosses partition
* boundaries. This module is made up of two parts:
*
* partition This part detects the presence/absence of other
* partitions. It provides a heartbeat and monitors
* the heartbeats of other partitions.
*
* channel This part manages the channels and sends/receives
* messages across them to/from other partitions.
*
* There are a couple of additional functions residing in XP, which
* provide an interface to XPC for its users.
*
*
* Caveats:
*
* . Currently on sn2, we have no way to determine which nasid an IRQ
* came from. Thus, xpc_send_IRQ_sn2() does a remote amo write
* followed by an IPI. The amo indicates where data is to be pulled
* from, so after the IPI arrives, the remote partition checks the amo
* word. The IPI can actually arrive before the amo however, so other
* code must periodically check for this case. Also, remote amo
* operations do not reliably time out. Thus we do a remote PIO read
* solely to know whether the remote partition is down and whether we
* should stop sending IPIs to it. This remote PIO read operation is
* set up in a special nofault region so SAL knows to ignore (and
* cleanup) any errors due to the remote amo write, PIO read, and/or
* PIO write operations.
*
* If/when new hardware solves this IPI problem, we should abandon
* the current approach.
*
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/sysctl.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/reboot.h>
#include <linux/kdebug.h>
#include <linux/kthread.h>
#include "xpc.h"
/* define two XPC debug device structures to be used with dev_dbg() et al */
struct device_driver xpc_dbg_name = {
.name = "xpc"
};
struct device xpc_part_dbg_subname = {
.init_name = "", /* set to "part" at xpc_init() time */
.driver = &xpc_dbg_name
};
struct device xpc_chan_dbg_subname = {
.init_name = "", /* set to "chan" at xpc_init() time */
.driver = &xpc_dbg_name
};
struct device *xpc_part = &xpc_part_dbg_subname;
struct device *xpc_chan = &xpc_chan_dbg_subname;
static int xpc_kdebug_ignore;
/* systune related variables for /proc/sys directories */
static int xpc_hb_interval = XPC_HB_DEFAULT_INTERVAL;
static int xpc_hb_min_interval = 1;
static int xpc_hb_max_interval = 10;
static int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_INTERVAL;
static int xpc_hb_check_min_interval = 10;
static int xpc_hb_check_max_interval = 120;
int xpc_disengage_timelimit = XPC_DISENGAGE_DEFAULT_TIMELIMIT;
static int xpc_disengage_min_timelimit; /* = 0 */
static int xpc_disengage_max_timelimit = 120;
static ctl_table xpc_sys_xpc_hb_dir[] = {
{
.procname = "hb_interval",
.data = &xpc_hb_interval,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = &xpc_hb_min_interval,
.extra2 = &xpc_hb_max_interval},
{
.procname = "hb_check_interval",
.data = &xpc_hb_check_interval,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = &xpc_hb_check_min_interval,
.extra2 = &xpc_hb_check_max_interval},
{}
};
static ctl_table xpc_sys_xpc_dir[] = {
{
.procname = "hb",
.mode = 0555,
.child = xpc_sys_xpc_hb_dir},
{
.procname = "disengage_timelimit",
.data = &xpc_disengage_timelimit,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = &xpc_disengage_min_timelimit,
.extra2 = &xpc_disengage_max_timelimit},
{}
};
static ctl_table xpc_sys_dir[] = {
{
.procname = "xpc",
.mode = 0555,
.child = xpc_sys_xpc_dir},
{}
};
static struct ctl_table_header *xpc_sysctl;
/* non-zero if any remote partition disengage was timed out */
int xpc_disengage_timedout;
/* #of activate IRQs received and not yet processed */
int xpc_activate_IRQ_rcvd;
DEFINE_SPINLOCK(xpc_activate_IRQ_rcvd_lock);
/* IRQ handler notifies this wait queue on receipt of an IRQ */
DECLARE_WAIT_QUEUE_HEAD(xpc_activate_IRQ_wq);
static unsigned long xpc_hb_check_timeout;
static struct timer_list xpc_hb_timer;
/* notification that the xpc_hb_checker thread has exited */
static DECLARE_COMPLETION(xpc_hb_checker_exited);
/* notification that the xpc_discovery thread has exited */
static DECLARE_COMPLETION(xpc_discovery_exited);
static void xpc_kthread_waitmsgs(struct xpc_partition *, struct xpc_channel *);
static int xpc_system_reboot(struct notifier_block *, unsigned long, void *);
static struct notifier_block xpc_reboot_notifier = {
.notifier_call = xpc_system_reboot,
};
static int xpc_system_die(struct notifier_block *, unsigned long, void *);
static struct notifier_block xpc_die_notifier = {
.notifier_call = xpc_system_die,
};
struct xpc_arch_operations xpc_arch_ops;
/*
* Timer function to enforce the timelimit on the partition disengage.
*/
static void
xpc_timeout_partition_disengage(unsigned long data)
{
struct xpc_partition *part = (struct xpc_partition *)data;
DBUG_ON(time_is_after_jiffies(part->disengage_timeout));
(void)xpc_partition_disengaged(part);
DBUG_ON(part->disengage_timeout != 0);
DBUG_ON(xpc_arch_ops.partition_engaged(XPC_PARTID(part)));
}
/*
* Timer to produce the heartbeat. The timer structures function is
* already set when this is initially called. A tunable is used to
* specify when the next timeout should occur.
*/
static void
xpc_hb_beater(unsigned long dummy)
{
xpc_arch_ops.increment_heartbeat();
if (time_is_before_eq_jiffies(xpc_hb_check_timeout))
wake_up_interruptible(&xpc_activate_IRQ_wq);
xpc_hb_timer.expires = jiffies + (xpc_hb_interval * HZ);
add_timer(&xpc_hb_timer);
}
static void
xpc_start_hb_beater(void)
{
xpc_arch_ops.heartbeat_init();
init_timer(&xpc_hb_timer);
xpc_hb_timer.function = xpc_hb_beater;
xpc_hb_beater(0);
}
static void
xpc_stop_hb_beater(void)
{
del_timer_sync(&xpc_hb_timer);
xpc_arch_ops.heartbeat_exit();
}
/*
* At periodic intervals, scan through all active partitions and ensure
* their heartbeat is still active. If not, the partition is deactivated.
*/
static void
xpc_check_remote_hb(void)
{
struct xpc_partition *part;
short partid;
enum xp_retval ret;
for (partid = 0; partid < xp_max_npartitions; partid++) {
if (xpc_exiting)
break;
if (partid == xp_partition_id)
continue;
part = &xpc_partitions[partid];
if (part->act_state == XPC_P_AS_INACTIVE ||
part->act_state == XPC_P_AS_DEACTIVATING) {
continue;
}
ret = xpc_arch_ops.get_remote_heartbeat(part);
if (ret != xpSuccess)
XPC_DEACTIVATE_PARTITION(part, ret);
}
}
/*
* This thread is responsible for nearly all of the partition
* activation/deactivation.
*/
static int
xpc_hb_checker(void *ignore)
{
int force_IRQ = 0;
/* this thread was marked active by xpc_hb_init() */
set_cpus_allowed_ptr(current, cpumask_of(XPC_HB_CHECK_CPU));
/* set our heartbeating to other partitions into motion */
xpc_hb_check_timeout = jiffies + (xpc_hb_check_interval * HZ);
xpc_start_hb_beater();
while (!xpc_exiting) {
dev_dbg(xpc_part, "woke up with %d ticks rem; %d IRQs have "
"been received\n",
(int)(xpc_hb_check_timeout - jiffies),
xpc_activate_IRQ_rcvd);
/* checking of remote heartbeats is skewed by IRQ handling */
if (time_is_before_eq_jiffies(xpc_hb_check_timeout)) {
xpc_hb_check_timeout = jiffies +
(xpc_hb_check_interval * HZ);
dev_dbg(xpc_part, "checking remote heartbeats\n");
xpc_check_remote_hb();
/*
* On sn2 we need to periodically recheck to ensure no
* IRQ/amo pairs have been missed.
*/
if (is_shub())
force_IRQ = 1;
}
/* check for outstanding IRQs */
if (xpc_activate_IRQ_rcvd > 0 || force_IRQ != 0) {
force_IRQ = 0;
dev_dbg(xpc_part, "processing activate IRQs "
"received\n");
xpc_arch_ops.process_activate_IRQ_rcvd();
}
/* wait for IRQ or timeout */
(void)wait_event_interruptible(xpc_activate_IRQ_wq,
(time_is_before_eq_jiffies(
xpc_hb_check_timeout) ||
xpc_activate_IRQ_rcvd > 0 ||
xpc_exiting));
}
xpc_stop_hb_beater();
dev_dbg(xpc_part, "heartbeat checker is exiting\n");
/* mark this thread as having exited */
complete(&xpc_hb_checker_exited);
return 0;
}
/*
* This thread will attempt to discover other partitions to activate
* based on info provided by SAL. This new thread is short lived and
* will exit once discovery is complete.
*/
static int
xpc_initiate_discovery(void *ignore)
{
xpc_discovery();
dev_dbg(xpc_part, "discovery thread is exiting\n");
/* mark this thread as having exited */
complete(&xpc_discovery_exited);
return 0;
}
/*
* The first kthread assigned to a newly activated partition is the one
* created by XPC HB with which it calls xpc_activating(). XPC hangs on to
* that kthread until the partition is brought down, at which time that kthread
* returns back to XPC HB. (The return of that kthread will signify to XPC HB
* that XPC has dismantled all communication infrastructure for the associated
* partition.) This kthread becomes the channel manager for that partition.
*
* Each active partition has a channel manager, who, besides connecting and
* disconnecting channels, will ensure that each of the partition's connected
* channels has the required number of assigned kthreads to get the work done.
*/
static void
xpc_channel_mgr(struct xpc_partition *part)
{
while (part->act_state != XPC_P_AS_DEACTIVATING ||
atomic_read(&part->nchannels_active) > 0 ||
!xpc_partition_disengaged(part)) {
xpc_process_sent_chctl_flags(part);
/*
* Wait until we've been requested to activate kthreads or
* all of the channel's message queues have been torn down or
* a signal is pending.
*
* The channel_mgr_requests is set to 1 after being awakened,
* This is done to prevent the channel mgr from making one pass
* through the loop for each request, since he will
* be servicing all the requests in one pass. The reason it's
* set to 1 instead of 0 is so that other kthreads will know
* that the channel mgr is running and won't bother trying to
* wake him up.
*/
atomic_dec(&part->channel_mgr_requests);
(void)wait_event_interruptible(part->channel_mgr_wq,
(atomic_read(&part->channel_mgr_requests) > 0 ||
part->chctl.all_flags != 0 ||
(part->act_state == XPC_P_AS_DEACTIVATING &&
atomic_read(&part->nchannels_active) == 0 &&
xpc_partition_disengaged(part))));
atomic_set(&part->channel_mgr_requests, 1);
}
}
/*
* Guarantee that the kzalloc'd memory is cacheline aligned.
*/
void *
xpc_kzalloc_cacheline_aligned(size_t size, gfp_t flags, void **base)
{
/* see if kzalloc will give us cachline aligned memory by default */
*base = kzalloc(size, flags);
if (*base == NULL)
return NULL;
if ((u64)*base == L1_CACHE_ALIGN((u64)*base))
return *base;
kfree(*base);
/* nope, we'll have to do it ourselves */
*base = kzalloc(size + L1_CACHE_BYTES, flags);
if (*base == NULL)
return NULL;
return (void *)L1_CACHE_ALIGN((u64)*base);
}
/*
* Setup the channel structures necessary to support XPartition Communication
* between the specified remote partition and the local one.
*/
static enum xp_retval
xpc_setup_ch_structures(struct xpc_partition *part)
{
enum xp_retval ret;
int ch_number;
struct xpc_channel *ch;
short partid = XPC_PARTID(part);
/*
* Allocate all of the channel structures as a contiguous chunk of
* memory.
*/
DBUG_ON(part->channels != NULL);
part->channels = kzalloc(sizeof(struct xpc_channel) * XPC_MAX_NCHANNELS,
GFP_KERNEL);
if (part->channels == NULL) {
dev_err(xpc_chan, "can't get memory for channels\n");
return xpNoMemory;
}
/* allocate the remote open and close args */
part->remote_openclose_args =
xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE,
GFP_KERNEL, &part->
remote_openclose_args_base);
if (part->remote_openclose_args == NULL) {
dev_err(xpc_chan, "can't get memory for remote connect args\n");
ret = xpNoMemory;
goto out_1;
}
part->chctl.all_flags = 0;
spin_lock_init(&part->chctl_lock);
atomic_set(&part->channel_mgr_requests, 1);
init_waitqueue_head(&part->channel_mgr_wq);
part->nchannels = XPC_MAX_NCHANNELS;
atomic_set(&part->nchannels_active, 0);
atomic_set(&part->nchannels_engaged, 0);
for (ch_number = 0; ch_number < part->nchannels; ch_number++) {
ch = &part->channels[ch_number];
ch->partid = partid;
ch->number = ch_number;
ch->flags = XPC_C_DISCONNECTED;
atomic_set(&ch->kthreads_assigned, 0);
atomic_set(&ch->kthreads_idle, 0);
atomic_set(&ch->kthreads_active, 0);
atomic_set(&ch->references, 0);
atomic_set(&ch->n_to_notify, 0);
spin_lock_init(&ch->lock);
init_completion(&ch->wdisconnect_wait);
atomic_set(&ch->n_on_msg_allocate_wq, 0);
init_waitqueue_head(&ch->msg_allocate_wq);
init_waitqueue_head(&ch->idle_wq);
}
ret = xpc_arch_ops.setup_ch_structures(part);
if (ret != xpSuccess)
goto out_2;
/*
* With the setting of the partition setup_state to XPC_P_SS_SETUP,
* we're declaring that this partition is ready to go.
*/
part->setup_state = XPC_P_SS_SETUP;
return xpSuccess;
/* setup of ch structures failed */
out_2:
kfree(part->remote_openclose_args_base);
part->remote_openclose_args = NULL;
out_1:
kfree(part->channels);
part->channels = NULL;
return ret;
}
/*
* Teardown the channel structures necessary to support XPartition Communication
* between the specified remote partition and the local one.
*/
static void
xpc_teardown_ch_structures(struct xpc_partition *part)
{
DBUG_ON(atomic_read(&part->nchannels_engaged) != 0);
DBUG_ON(atomic_read(&part->nchannels_active) != 0);
/*
* Make this partition inaccessible to local processes by marking it
* as no longer setup. Then wait before proceeding with the teardown
* until all existing references cease.
*/
DBUG_ON(part->setup_state != XPC_P_SS_SETUP);
part->setup_state = XPC_P_SS_WTEARDOWN;
wait_event(part->teardown_wq, (atomic_read(&part->references) == 0));
/* now we can begin tearing down the infrastructure */
xpc_arch_ops.teardown_ch_structures(part);
kfree(part->remote_openclose_args_base);
part->remote_openclose_args = NULL;
kfree(part->channels);
part->channels = NULL;
part->setup_state = XPC_P_SS_TORNDOWN;
}
/*
* When XPC HB determines that a partition has come up, it will create a new
* kthread and that kthread will call this function to attempt to set up the
* basic infrastructure used for Cross Partition Communication with the newly
* upped partition.
*
* The kthread that was created by XPC HB and which setup the XPC
* infrastructure will remain assigned to the partition becoming the channel
* manager for that partition until the partition is deactivating, at which
* time the kthread will teardown the XPC infrastructure and then exit.
*/
static int
xpc_activating(void *__partid)
{
short partid = (u64)__partid;
struct xpc_partition *part = &xpc_partitions[partid];
unsigned long irq_flags;
DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
spin_lock_irqsave(&part->act_lock, irq_flags);
if (part->act_state == XPC_P_AS_DEACTIVATING) {
part->act_state = XPC_P_AS_INACTIVE;
spin_unlock_irqrestore(&part->act_lock, irq_flags);
part->remote_rp_pa = 0;
return 0;
}
/* indicate the thread is activating */
DBUG_ON(part->act_state != XPC_P_AS_ACTIVATION_REQ);
part->act_state = XPC_P_AS_ACTIVATING;
XPC_SET_REASON(part, 0, 0);
spin_unlock_irqrestore(&part->act_lock, irq_flags);
dev_dbg(xpc_part, "activating partition %d\n", partid);
xpc_arch_ops.allow_hb(partid);
if (xpc_setup_ch_structures(part) == xpSuccess) {
(void)xpc_part_ref(part); /* this will always succeed */
if (xpc_arch_ops.make_first_contact(part) == xpSuccess) {
xpc_mark_partition_active(part);
xpc_channel_mgr(part);
/* won't return until partition is deactivating */
}
xpc_part_deref(part);
xpc_teardown_ch_structures(part);
}
xpc_arch_ops.disallow_hb(partid);
xpc_mark_partition_inactive(part);
if (part->reason == xpReactivating) {
/* interrupting ourselves results in activating partition */
xpc_arch_ops.request_partition_reactivation(part);
}
return 0;
}
void
xpc_activate_partition(struct xpc_partition *part)
{
short partid = XPC_PARTID(part);
unsigned long irq_flags;
struct task_struct *kthread;
spin_lock_irqsave(&part->act_lock, irq_flags);
DBUG_ON(part->act_state != XPC_P_AS_INACTIVE);
part->act_state = XPC_P_AS_ACTIVATION_REQ;
XPC_SET_REASON(part, xpCloneKThread, __LINE__);
spin_unlock_irqrestore(&part->act_lock, irq_flags);
kthread = kthread_run(xpc_activating, (void *)((u64)partid), "xpc%02d",
partid);
if (IS_ERR(kthread)) {
spin_lock_irqsave(&part->act_lock, irq_flags);
part->act_state = XPC_P_AS_INACTIVE;
XPC_SET_REASON(part, xpCloneKThreadFailed, __LINE__);
spin_unlock_irqrestore(&part->act_lock, irq_flags);
}
}
void
xpc_activate_kthreads(struct xpc_channel *ch, int needed)
{
int idle = atomic_read(&ch->kthreads_idle);
int assigned = atomic_read(&ch->kthreads_assigned);
int wakeup;
DBUG_ON(needed <= 0);
if (idle > 0) {
wakeup = (needed > idle) ? idle : needed;
needed -= wakeup;
dev_dbg(xpc_chan, "wakeup %d idle kthreads, partid=%d, "
"channel=%d\n", wakeup, ch->partid, ch->number);
/* only wakeup the requested number of kthreads */
wake_up_nr(&ch->idle_wq, wakeup);
}
if (needed <= 0)
return;
if (needed + assigned > ch->kthreads_assigned_limit) {
needed = ch->kthreads_assigned_limit - assigned;
if (needed <= 0)
return;
}
dev_dbg(xpc_chan, "create %d new kthreads, partid=%d, channel=%d\n",
needed, ch->partid, ch->number);
xpc_create_kthreads(ch, needed, 0);
}
/*
* This function is where XPC's kthreads wait for messages to deliver.
*/
static void
xpc_kthread_waitmsgs(struct xpc_partition *part, struct xpc_channel *ch)
{
int (*n_of_deliverable_payloads) (struct xpc_channel *) =
xpc_arch_ops.n_of_deliverable_payloads;
do {
/* deliver messages to their intended recipients */
while (n_of_deliverable_payloads(ch) > 0 &&
!(ch->flags & XPC_C_DISCONNECTING)) {
xpc_deliver_payload(ch);
}
if (atomic_inc_return(&ch->kthreads_idle) >
ch->kthreads_idle_limit) {
/* too many idle kthreads on this channel */
atomic_dec(&ch->kthreads_idle);
break;
}
dev_dbg(xpc_chan, "idle kthread calling "
"wait_event_interruptible_exclusive()\n");
(void)wait_event_interruptible_exclusive(ch->idle_wq,
(n_of_deliverable_payloads(ch) > 0 ||
(ch->flags & XPC_C_DISCONNECTING)));
atomic_dec(&ch->kthreads_idle);
} while (!(ch->flags & XPC_C_DISCONNECTING));
}
static int
xpc_kthread_start(void *args)
{
short partid = XPC_UNPACK_ARG1(args);
u16 ch_number = XPC_UNPACK_ARG2(args);
struct xpc_partition *part = &xpc_partitions[partid];
struct xpc_channel *ch;
int n_needed;
unsigned long irq_flags;
int (*n_of_deliverable_payloads) (struct xpc_channel *) =
xpc_arch_ops.n_of_deliverable_payloads;
dev_dbg(xpc_chan, "kthread starting, partid=%d, channel=%d\n",
partid, ch_number);
ch = &part->channels[ch_number];
if (!(ch->flags & XPC_C_DISCONNECTING)) {
/* let registerer know that connection has been established */
spin_lock_irqsave(&ch->lock, irq_flags);
if (!(ch->flags & XPC_C_CONNECTEDCALLOUT)) {
ch->flags |= XPC_C_CONNECTEDCALLOUT;
spin_unlock_irqrestore(&ch->lock, irq_flags);
xpc_connected_callout(ch);
spin_lock_irqsave(&ch->lock, irq_flags);
ch->flags |= XPC_C_CONNECTEDCALLOUT_MADE;
spin_unlock_irqrestore(&ch->lock, irq_flags);
/*
* It is possible that while the callout was being
* made that the remote partition sent some messages.
* If that is the case, we may need to activate
* additional kthreads to help deliver them. We only
* need one less than total #of messages to deliver.
*/
n_needed = n_of_deliverable_payloads(ch) - 1;
if (n_needed > 0 && !(ch->flags & XPC_C_DISCONNECTING))
xpc_activate_kthreads(ch, n_needed);
} else {
spin_unlock_irqrestore(&ch->lock, irq_flags);
}
xpc_kthread_waitmsgs(part, ch);
}
/* let registerer know that connection is disconnecting */
spin_lock_irqsave(&ch->lock, irq_flags);
if ((ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) &&
!(ch->flags & XPC_C_DISCONNECTINGCALLOUT)) {
ch->flags |= XPC_C_DISCONNECTINGCALLOUT;
spin_unlock_irqrestore(&ch->lock, irq_flags);
xpc_disconnect_callout(ch, xpDisconnecting);
spin_lock_irqsave(&ch->lock, irq_flags);
ch->flags |= XPC_C_DISCONNECTINGCALLOUT_MADE;
}
spin_unlock_irqrestore(&ch->lock, irq_flags);
if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
atomic_dec_return(&part->nchannels_engaged) == 0) {
xpc_arch_ops.indicate_partition_disengaged(part);
}
xpc_msgqueue_deref(ch);
dev_dbg(xpc_chan, "kthread exiting, partid=%d, channel=%d\n",
partid, ch_number);
xpc_part_deref(part);
return 0;
}
/*
* For each partition that XPC has established communications with, there is
* a minimum of one kernel thread assigned to perform any operation that
* may potentially sleep or block (basically the callouts to the asynchronous
* functions registered via xpc_connect()).
*
* Additional kthreads are created and destroyed by XPC as the workload
* demands.
*
* A kthread is assigned to one of the active channels that exists for a given
* partition.
*/
void
xpc_create_kthreads(struct xpc_channel *ch, int needed,
int ignore_disconnecting)
{
unsigned long irq_flags;
u64 args = XPC_PACK_ARGS(ch->partid, ch->number);
struct xpc_partition *part = &xpc_partitions[ch->partid];
struct task_struct *kthread;
void (*indicate_partition_disengaged) (struct xpc_partition *) =
xpc_arch_ops.indicate_partition_disengaged;
while (needed-- > 0) {
/*
* The following is done on behalf of the newly created
* kthread. That kthread is responsible for doing the
* counterpart to the following before it exits.
*/
if (ignore_disconnecting) {
if (!atomic_inc_not_zero(&ch->kthreads_assigned)) {
/* kthreads assigned had gone to zero */
BUG_ON(!(ch->flags &
XPC_C_DISCONNECTINGCALLOUT_MADE));
break;
}
} else if (ch->flags & XPC_C_DISCONNECTING) {
break;
} else if (atomic_inc_return(&ch->kthreads_assigned) == 1 &&
atomic_inc_return(&part->nchannels_engaged) == 1) {
xpc_arch_ops.indicate_partition_engaged(part);
}
(void)xpc_part_ref(part);
xpc_msgqueue_ref(ch);
kthread = kthread_run(xpc_kthread_start, (void *)args,
"xpc%02dc%d", ch->partid, ch->number);
if (IS_ERR(kthread)) {
/* the fork failed */
/*
* NOTE: if (ignore_disconnecting &&
* !(ch->flags & XPC_C_DISCONNECTINGCALLOUT)) is true,
* then we'll deadlock if all other kthreads assigned
* to this channel are blocked in the channel's
* registerer, because the only thing that will unblock
* them is the xpDisconnecting callout that this
* failed kthread_run() would have made.
*/
if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
atomic_dec_return(&part->nchannels_engaged) == 0) {
indicate_partition_disengaged(part);
}
xpc_msgqueue_deref(ch);
xpc_part_deref(part);
if (atomic_read(&ch->kthreads_assigned) <
ch->kthreads_idle_limit) {
/*
* Flag this as an error only if we have an
* insufficient #of kthreads for the channel
* to function.
*/
spin_lock_irqsave(&ch->lock, irq_flags);
XPC_DISCONNECT_CHANNEL(ch, xpLackOfResources,
&irq_flags);
spin_unlock_irqrestore(&ch->lock, irq_flags);
}
break;
}
}
}
void
xpc_disconnect_wait(int ch_number)
{
unsigned long irq_flags;
short partid;
struct xpc_partition *part;
struct xpc_channel *ch;
int wakeup_channel_mgr;
/* now wait for all callouts to the caller's function to cease */
for (partid = 0; partid < xp_max_npartitions; partid++) {
part = &xpc_partitions[partid];
if (!xpc_part_ref(part))
continue;
ch = &part->channels[ch_number];
if (!(ch->flags & XPC_C_WDISCONNECT)) {
xpc_part_deref(part);
continue;
}
wait_for_completion(&ch->wdisconnect_wait);
spin_lock_irqsave(&ch->lock, irq_flags);
DBUG_ON(!(ch->flags & XPC_C_DISCONNECTED));
wakeup_channel_mgr = 0;
if (ch->delayed_chctl_flags) {
if (part->act_state != XPC_P_AS_DEACTIVATING) {
spin_lock(&part->chctl_lock);
part->chctl.flags[ch->number] |=
ch->delayed_chctl_flags;
spin_unlock(&part->chctl_lock);
wakeup_channel_mgr = 1;
}
ch->delayed_chctl_flags = 0;
}
ch->flags &= ~XPC_C_WDISCONNECT;
spin_unlock_irqrestore(&ch->lock, irq_flags);
if (wakeup_channel_mgr)
xpc_wakeup_channel_mgr(part);
xpc_part_deref(part);
}
}
static int
xpc_setup_partitions(void)
{
short partid;
struct xpc_partition *part;
xpc_partitions = kzalloc(sizeof(struct xpc_partition) *
xp_max_npartitions, GFP_KERNEL);
if (xpc_partitions == NULL) {
dev_err(xpc_part, "can't get memory for partition structure\n");
return -ENOMEM;
}
/*
* The first few fields of each entry of xpc_partitions[] need to
* be initialized now so that calls to xpc_connect() and
* xpc_disconnect() can be made prior to the activation of any remote
* partition. NOTE THAT NONE OF THE OTHER FIELDS BELONGING TO THESE
* ENTRIES ARE MEANINGFUL UNTIL AFTER AN ENTRY'S CORRESPONDING
* PARTITION HAS BEEN ACTIVATED.
*/
for (partid = 0; partid < xp_max_npartitions; partid++) {
part = &xpc_partitions[partid];
DBUG_ON((u64)part != L1_CACHE_ALIGN((u64)part));
part->activate_IRQ_rcvd = 0;
spin_lock_init(&part->act_lock);
part->act_state = XPC_P_AS_INACTIVE;
XPC_SET_REASON(part, 0, 0);
init_timer(&part->disengage_timer);
part->disengage_timer.function =
xpc_timeout_partition_disengage;
part->disengage_timer.data = (unsigned long)part;
part->setup_state = XPC_P_SS_UNSET;
init_waitqueue_head(&part->teardown_wq);
atomic_set(&part->references, 0);
}
return xpc_arch_ops.setup_partitions();
}
static void
xpc_teardown_partitions(void)
{
xpc_arch_ops.teardown_partitions();
kfree(xpc_partitions);
}
static void
xpc_do_exit(enum xp_retval reason)
{
short partid;
int active_part_count, printed_waiting_msg = 0;
struct xpc_partition *part;
unsigned long printmsg_time, disengage_timeout = 0;
/* a 'rmmod XPC' and a 'reboot' cannot both end up here together */
DBUG_ON(xpc_exiting == 1);
/*
* Let the heartbeat checker thread and the discovery thread
* (if one is running) know that they should exit. Also wake up
* the heartbeat checker thread in case it's sleeping.
*/
xpc_exiting = 1;
wake_up_interruptible(&xpc_activate_IRQ_wq);
/* wait for the discovery thread to exit */
wait_for_completion(&xpc_discovery_exited);
/* wait for the heartbeat checker thread to exit */
wait_for_completion(&xpc_hb_checker_exited);
/* sleep for a 1/3 of a second or so */
(void)msleep_interruptible(300);
/* wait for all partitions to become inactive */
printmsg_time = jiffies + (XPC_DEACTIVATE_PRINTMSG_INTERVAL * HZ);
xpc_disengage_timedout = 0;
do {
active_part_count = 0;
for (partid = 0; partid < xp_max_npartitions; partid++) {
part = &xpc_partitions[partid];
if (xpc_partition_disengaged(part) &&
part->act_state == XPC_P_AS_INACTIVE) {
continue;
}
active_part_count++;
XPC_DEACTIVATE_PARTITION(part, reason);
if (part->disengage_timeout > disengage_timeout)
disengage_timeout = part->disengage_timeout;
}
if (xpc_arch_ops.any_partition_engaged()) {
if (time_is_before_jiffies(printmsg_time)) {
dev_info(xpc_part, "waiting for remote "
"partitions to deactivate, timeout in "
"%ld seconds\n", (disengage_timeout -
jiffies) / HZ);
printmsg_time = jiffies +
(XPC_DEACTIVATE_PRINTMSG_INTERVAL * HZ);
printed_waiting_msg = 1;
}
} else if (active_part_count > 0) {
if (printed_waiting_msg) {
dev_info(xpc_part, "waiting for local partition"
" to deactivate\n");
printed_waiting_msg = 0;
}
} else {
if (!xpc_disengage_timedout) {
dev_info(xpc_part, "all partitions have "
"deactivated\n");
}
break;
}
/* sleep for a 1/3 of a second or so */
(void)msleep_interruptible(300);
} while (1);
DBUG_ON(xpc_arch_ops.any_partition_engaged());
xpc_teardown_rsvd_page();
if (reason == xpUnloading) {
(void)unregister_die_notifier(&xpc_die_notifier);
(void)unregister_reboot_notifier(&xpc_reboot_notifier);
}
/* clear the interface to XPC's functions */
xpc_clear_interface();
if (xpc_sysctl)
unregister_sysctl_table(xpc_sysctl);
xpc_teardown_partitions();
if (is_shub())
xpc_exit_sn2();
else if (is_uv())
xpc_exit_uv();
}
/*
* This function is called when the system is being rebooted.
*/
static int
xpc_system_reboot(struct notifier_block *nb, unsigned long event, void *unused)
{
enum xp_retval reason;
switch (event) {
case SYS_RESTART:
reason = xpSystemReboot;
break;
case SYS_HALT:
reason = xpSystemHalt;
break;
case SYS_POWER_OFF:
reason = xpSystemPoweroff;
break;
default:
reason = xpSystemGoingDown;
}
xpc_do_exit(reason);
return NOTIFY_DONE;
}
/*
* Notify other partitions to deactivate from us by first disengaging from all
* references to our memory.
*/
static void
xpc_die_deactivate(void)
{
struct xpc_partition *part;
short partid;
int any_engaged;
long keep_waiting;
long wait_to_print;
/* keep xpc_hb_checker thread from doing anything (just in case) */
xpc_exiting = 1;
xpc_arch_ops.disallow_all_hbs(); /*indicate we're deactivated */
for (partid = 0; partid < xp_max_npartitions; partid++) {
part = &xpc_partitions[partid];
if (xpc_arch_ops.partition_engaged(partid) ||
part->act_state != XPC_P_AS_INACTIVE) {
xpc_arch_ops.request_partition_deactivation(part);
xpc_arch_ops.indicate_partition_disengaged(part);
}
}
/*
* Though we requested that all other partitions deactivate from us,
* we only wait until they've all disengaged or we've reached the
* defined timelimit.
*
* Given that one iteration through the following while-loop takes
* approximately 200 microseconds, calculate the #of loops to take
* before bailing and the #of loops before printing a waiting message.
*/
keep_waiting = xpc_disengage_timelimit * 1000 * 5;
wait_to_print = XPC_DEACTIVATE_PRINTMSG_INTERVAL * 1000 * 5;
while (1) {
any_engaged = xpc_arch_ops.any_partition_engaged();
if (!any_engaged) {
dev_info(xpc_part, "all partitions have deactivated\n");
break;
}
if (!keep_waiting--) {
for (partid = 0; partid < xp_max_npartitions;
partid++) {
if (xpc_arch_ops.partition_engaged(partid)) {
dev_info(xpc_part, "deactivate from "
"remote partition %d timed "
"out\n", partid);
}
}
break;
}
if (!wait_to_print--) {
dev_info(xpc_part, "waiting for remote partitions to "
"deactivate, timeout in %ld seconds\n",
keep_waiting / (1000 * 5));
wait_to_print = XPC_DEACTIVATE_PRINTMSG_INTERVAL *
1000 * 5;
}
udelay(200);
}
}
/*
* This function is called when the system is being restarted or halted due
* to some sort of system failure. If this is the case we need to notify the
* other partitions to disengage from all references to our memory.
* This function can also be called when our heartbeater could be offlined
* for a time. In this case we need to notify other partitions to not worry
* about the lack of a heartbeat.
*/
static int
xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused)
{
#ifdef CONFIG_IA64 /* !!! temporary kludge */
switch (event) {
case DIE_MACHINE_RESTART:
case DIE_MACHINE_HALT:
xpc_die_deactivate();
break;
case DIE_KDEBUG_ENTER:
/* Should lack of heartbeat be ignored by other partitions? */
if (!xpc_kdebug_ignore)
break;
/* fall through */
case DIE_MCA_MONARCH_ENTER:
case DIE_INIT_MONARCH_ENTER:
xpc_arch_ops.offline_heartbeat();
break;
case DIE_KDEBUG_LEAVE:
/* Is lack of heartbeat being ignored by other partitions? */
if (!xpc_kdebug_ignore)
break;
/* fall through */
case DIE_MCA_MONARCH_LEAVE:
case DIE_INIT_MONARCH_LEAVE:
xpc_arch_ops.online_heartbeat();
break;
}
#else
xpc_die_deactivate();
#endif
return NOTIFY_DONE;
}
int __init
xpc_init(void)
{
int ret;
struct task_struct *kthread;
dev_set_name(xpc_part, "part");
dev_set_name(xpc_chan, "chan");
if (is_shub()) {
/*
* The ia64-sn2 architecture supports at most 64 partitions.
* And the inability to unregister remote amos restricts us
* further to only support exactly 64 partitions on this
* architecture, no less.
*/
if (xp_max_npartitions != 64) {
dev_err(xpc_part, "max #of partitions not set to 64\n");
ret = -EINVAL;
} else {
ret = xpc_init_sn2();
}
} else if (is_uv()) {
ret = xpc_init_uv();
} else {
ret = -ENODEV;
}
if (ret != 0)
return ret;
ret = xpc_setup_partitions();
if (ret != 0) {
dev_err(xpc_part, "can't get memory for partition structure\n");
goto out_1;
}
xpc_sysctl = register_sysctl_table(xpc_sys_dir);
/*
* Fill the partition reserved page with the information needed by
* other partitions to discover we are alive and establish initial
* communications.
*/
ret = xpc_setup_rsvd_page();
if (ret != 0) {
dev_err(xpc_part, "can't setup our reserved page\n");
goto out_2;
}
/* add ourselves to the reboot_notifier_list */
ret = register_reboot_notifier(&xpc_reboot_notifier);
if (ret != 0)
dev_warn(xpc_part, "can't register reboot notifier\n");
/* add ourselves to the die_notifier list */
ret = register_die_notifier(&xpc_die_notifier);
if (ret != 0)
dev_warn(xpc_part, "can't register die notifier\n");
/*
* The real work-horse behind xpc. This processes incoming
* interrupts and monitors remote heartbeats.
*/
kthread = kthread_run(xpc_hb_checker, NULL, XPC_HB_CHECK_THREAD_NAME);
if (IS_ERR(kthread)) {
dev_err(xpc_part, "failed while forking hb check thread\n");
ret = -EBUSY;
goto out_3;
}
/*
* Startup a thread that will attempt to discover other partitions to
* activate based on info provided by SAL. This new thread is short
* lived and will exit once discovery is complete.
*/
kthread = kthread_run(xpc_initiate_discovery, NULL,
XPC_DISCOVERY_THREAD_NAME);
if (IS_ERR(kthread)) {
dev_err(xpc_part, "failed while forking discovery thread\n");
/* mark this new thread as a non-starter */
complete(&xpc_discovery_exited);
xpc_do_exit(xpUnloading);
return -EBUSY;
}
/* set the interface to point at XPC's functions */
xpc_set_interface(xpc_initiate_connect, xpc_initiate_disconnect,
xpc_initiate_send, xpc_initiate_send_notify,
xpc_initiate_received, xpc_initiate_partid_to_nasids);
return 0;
/* initialization was not successful */
out_3:
xpc_teardown_rsvd_page();
(void)unregister_die_notifier(&xpc_die_notifier);
(void)unregister_reboot_notifier(&xpc_reboot_notifier);
out_2:
if (xpc_sysctl)
unregister_sysctl_table(xpc_sysctl);
xpc_teardown_partitions();
out_1:
if (is_shub())
xpc_exit_sn2();
else if (is_uv())
xpc_exit_uv();
return ret;
}
module_init(xpc_init);
void __exit
xpc_exit(void)
{
xpc_do_exit(xpUnloading);
}
module_exit(xpc_exit);
MODULE_AUTHOR("Silicon Graphics, Inc.");
MODULE_DESCRIPTION("Cross Partition Communication (XPC) support");
MODULE_LICENSE("GPL");
module_param(xpc_hb_interval, int, 0);
MODULE_PARM_DESC(xpc_hb_interval, "Number of seconds between "
"heartbeat increments.");
module_param(xpc_hb_check_interval, int, 0);
MODULE_PARM_DESC(xpc_hb_check_interval, "Number of seconds between "
"heartbeat checks.");
module_param(xpc_disengage_timelimit, int, 0);
MODULE_PARM_DESC(xpc_disengage_timelimit, "Number of seconds to wait "
"for disengage to complete.");
module_param(xpc_kdebug_ignore, int, 0);
MODULE_PARM_DESC(xpc_kdebug_ignore, "Should lack of heartbeat be ignored by "
"other partitions when dropping into kdebug.");