kernel-ark/sound/soc/codecs/wm8580.c
Mark Brown 18273b05de ASoC: wm8580: Move regulator acquisition to I2C probe
Better style as we get all the resources we need prior to starting the
ASoC level probe.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-12 14:09:18 +08:00

1028 lines
26 KiB
C

/*
* wm8580.c -- WM8580 ALSA Soc Audio driver
*
* Copyright 2008-12 Wolfson Microelectronics PLC.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* Notes:
* The WM8580 is a multichannel codec with S/PDIF support, featuring six
* DAC channels and two ADC channels.
*
* Currently only the primary audio interface is supported - S/PDIF and
* the secondary audio interfaces are not.
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/of_device.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/tlv.h>
#include <sound/initval.h>
#include <asm/div64.h>
#include "wm8580.h"
/* WM8580 register space */
#define WM8580_PLLA1 0x00
#define WM8580_PLLA2 0x01
#define WM8580_PLLA3 0x02
#define WM8580_PLLA4 0x03
#define WM8580_PLLB1 0x04
#define WM8580_PLLB2 0x05
#define WM8580_PLLB3 0x06
#define WM8580_PLLB4 0x07
#define WM8580_CLKSEL 0x08
#define WM8580_PAIF1 0x09
#define WM8580_PAIF2 0x0A
#define WM8580_SAIF1 0x0B
#define WM8580_PAIF3 0x0C
#define WM8580_PAIF4 0x0D
#define WM8580_SAIF2 0x0E
#define WM8580_DAC_CONTROL1 0x0F
#define WM8580_DAC_CONTROL2 0x10
#define WM8580_DAC_CONTROL3 0x11
#define WM8580_DAC_CONTROL4 0x12
#define WM8580_DAC_CONTROL5 0x13
#define WM8580_DIGITAL_ATTENUATION_DACL1 0x14
#define WM8580_DIGITAL_ATTENUATION_DACR1 0x15
#define WM8580_DIGITAL_ATTENUATION_DACL2 0x16
#define WM8580_DIGITAL_ATTENUATION_DACR2 0x17
#define WM8580_DIGITAL_ATTENUATION_DACL3 0x18
#define WM8580_DIGITAL_ATTENUATION_DACR3 0x19
#define WM8580_MASTER_DIGITAL_ATTENUATION 0x1C
#define WM8580_ADC_CONTROL1 0x1D
#define WM8580_SPDTXCHAN0 0x1E
#define WM8580_SPDTXCHAN1 0x1F
#define WM8580_SPDTXCHAN2 0x20
#define WM8580_SPDTXCHAN3 0x21
#define WM8580_SPDTXCHAN4 0x22
#define WM8580_SPDTXCHAN5 0x23
#define WM8580_SPDMODE 0x24
#define WM8580_INTMASK 0x25
#define WM8580_GPO1 0x26
#define WM8580_GPO2 0x27
#define WM8580_GPO3 0x28
#define WM8580_GPO4 0x29
#define WM8580_GPO5 0x2A
#define WM8580_INTSTAT 0x2B
#define WM8580_SPDRXCHAN1 0x2C
#define WM8580_SPDRXCHAN2 0x2D
#define WM8580_SPDRXCHAN3 0x2E
#define WM8580_SPDRXCHAN4 0x2F
#define WM8580_SPDRXCHAN5 0x30
#define WM8580_SPDSTAT 0x31
#define WM8580_PWRDN1 0x32
#define WM8580_PWRDN2 0x33
#define WM8580_READBACK 0x34
#define WM8580_RESET 0x35
#define WM8580_MAX_REGISTER 0x35
#define WM8580_DACOSR 0x40
/* PLLB4 (register 7h) */
#define WM8580_PLLB4_MCLKOUTSRC_MASK 0x60
#define WM8580_PLLB4_MCLKOUTSRC_PLLA 0x20
#define WM8580_PLLB4_MCLKOUTSRC_PLLB 0x40
#define WM8580_PLLB4_MCLKOUTSRC_OSC 0x60
#define WM8580_PLLB4_CLKOUTSRC_MASK 0x180
#define WM8580_PLLB4_CLKOUTSRC_PLLACLK 0x080
#define WM8580_PLLB4_CLKOUTSRC_PLLBCLK 0x100
#define WM8580_PLLB4_CLKOUTSRC_OSCCLK 0x180
/* CLKSEL (register 8h) */
#define WM8580_CLKSEL_DAC_CLKSEL_MASK 0x03
#define WM8580_CLKSEL_DAC_CLKSEL_PLLA 0x01
#define WM8580_CLKSEL_DAC_CLKSEL_PLLB 0x02
/* AIF control 1 (registers 9h-bh) */
#define WM8580_AIF_RATE_MASK 0x7
#define WM8580_AIF_BCLKSEL_MASK 0x18
#define WM8580_AIF_MS 0x20
#define WM8580_AIF_CLKSRC_MASK 0xc0
#define WM8580_AIF_CLKSRC_PLLA 0x40
#define WM8580_AIF_CLKSRC_PLLB 0x40
#define WM8580_AIF_CLKSRC_MCLK 0xc0
/* AIF control 2 (registers ch-eh) */
#define WM8580_AIF_FMT_MASK 0x03
#define WM8580_AIF_FMT_RIGHTJ 0x00
#define WM8580_AIF_FMT_LEFTJ 0x01
#define WM8580_AIF_FMT_I2S 0x02
#define WM8580_AIF_FMT_DSP 0x03
#define WM8580_AIF_LENGTH_MASK 0x0c
#define WM8580_AIF_LENGTH_16 0x00
#define WM8580_AIF_LENGTH_20 0x04
#define WM8580_AIF_LENGTH_24 0x08
#define WM8580_AIF_LENGTH_32 0x0c
#define WM8580_AIF_LRP 0x10
#define WM8580_AIF_BCP 0x20
/* Powerdown Register 1 (register 32h) */
#define WM8580_PWRDN1_PWDN 0x001
#define WM8580_PWRDN1_ALLDACPD 0x040
/* Powerdown Register 2 (register 33h) */
#define WM8580_PWRDN2_OSSCPD 0x001
#define WM8580_PWRDN2_PLLAPD 0x002
#define WM8580_PWRDN2_PLLBPD 0x004
#define WM8580_PWRDN2_SPDIFPD 0x008
#define WM8580_PWRDN2_SPDIFTXD 0x010
#define WM8580_PWRDN2_SPDIFRXD 0x020
#define WM8580_DAC_CONTROL5_MUTEALL 0x10
/*
* wm8580 register cache
* We can't read the WM8580 register space when we
* are using 2 wire for device control, so we cache them instead.
*/
static const struct reg_default wm8580_reg_defaults[] = {
{ 0, 0x0121 },
{ 1, 0x017e },
{ 2, 0x007d },
{ 3, 0x0014 },
{ 4, 0x0121 },
{ 5, 0x017e },
{ 6, 0x007d },
{ 7, 0x0194 },
{ 8, 0x0010 },
{ 9, 0x0002 },
{ 10, 0x0002 },
{ 11, 0x00c2 },
{ 12, 0x0182 },
{ 13, 0x0082 },
{ 14, 0x000a },
{ 15, 0x0024 },
{ 16, 0x0009 },
{ 17, 0x0000 },
{ 18, 0x00ff },
{ 19, 0x0000 },
{ 20, 0x00ff },
{ 21, 0x00ff },
{ 22, 0x00ff },
{ 23, 0x00ff },
{ 24, 0x00ff },
{ 25, 0x00ff },
{ 26, 0x00ff },
{ 27, 0x00ff },
{ 28, 0x01f0 },
{ 29, 0x0040 },
{ 30, 0x0000 },
{ 31, 0x0000 },
{ 32, 0x0000 },
{ 33, 0x0000 },
{ 34, 0x0031 },
{ 35, 0x000b },
{ 36, 0x0039 },
{ 37, 0x0000 },
{ 38, 0x0010 },
{ 39, 0x0032 },
{ 40, 0x0054 },
{ 41, 0x0076 },
{ 42, 0x0098 },
{ 43, 0x0000 },
{ 44, 0x0000 },
{ 45, 0x0000 },
{ 46, 0x0000 },
{ 47, 0x0000 },
{ 48, 0x0000 },
{ 49, 0x0000 },
{ 50, 0x005e },
{ 51, 0x003e },
{ 52, 0x0000 },
};
static bool wm8580_volatile(struct device *dev, unsigned int reg)
{
switch (reg) {
case WM8580_RESET:
return true;
default:
return false;
}
}
struct pll_state {
unsigned int in;
unsigned int out;
};
#define WM8580_NUM_SUPPLIES 3
static const char *wm8580_supply_names[WM8580_NUM_SUPPLIES] = {
"AVDD",
"DVDD",
"PVDD",
};
/* codec private data */
struct wm8580_priv {
struct regmap *regmap;
struct regulator_bulk_data supplies[WM8580_NUM_SUPPLIES];
struct pll_state a;
struct pll_state b;
int sysclk[2];
};
static const DECLARE_TLV_DB_SCALE(dac_tlv, -12750, 50, 1);
static int wm8580_out_vu(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct soc_mixer_control *mc =
(struct soc_mixer_control *)kcontrol->private_value;
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct wm8580_priv *wm8580 = snd_soc_codec_get_drvdata(codec);
unsigned int reg = mc->reg;
unsigned int reg2 = mc->rreg;
int ret;
/* Clear the register cache VU so we write without VU set */
regcache_cache_only(wm8580->regmap, true);
regmap_update_bits(wm8580->regmap, reg, 0x100, 0x000);
regmap_update_bits(wm8580->regmap, reg2, 0x100, 0x000);
regcache_cache_only(wm8580->regmap, false);
ret = snd_soc_put_volsw(kcontrol, ucontrol);
if (ret < 0)
return ret;
/* Now write again with the volume update bit set */
snd_soc_update_bits(codec, reg, 0x100, 0x100);
snd_soc_update_bits(codec, reg2, 0x100, 0x100);
return 0;
}
static const struct snd_kcontrol_new wm8580_snd_controls[] = {
SOC_DOUBLE_R_EXT_TLV("DAC1 Playback Volume",
WM8580_DIGITAL_ATTENUATION_DACL1,
WM8580_DIGITAL_ATTENUATION_DACR1,
0, 0xff, 0, snd_soc_get_volsw, wm8580_out_vu, dac_tlv),
SOC_DOUBLE_R_EXT_TLV("DAC2 Playback Volume",
WM8580_DIGITAL_ATTENUATION_DACL2,
WM8580_DIGITAL_ATTENUATION_DACR2,
0, 0xff, 0, snd_soc_get_volsw, wm8580_out_vu, dac_tlv),
SOC_DOUBLE_R_EXT_TLV("DAC3 Playback Volume",
WM8580_DIGITAL_ATTENUATION_DACL3,
WM8580_DIGITAL_ATTENUATION_DACR3,
0, 0xff, 0, snd_soc_get_volsw, wm8580_out_vu, dac_tlv),
SOC_SINGLE("DAC1 Deemphasis Switch", WM8580_DAC_CONTROL3, 0, 1, 0),
SOC_SINGLE("DAC2 Deemphasis Switch", WM8580_DAC_CONTROL3, 1, 1, 0),
SOC_SINGLE("DAC3 Deemphasis Switch", WM8580_DAC_CONTROL3, 2, 1, 0),
SOC_DOUBLE("DAC1 Invert Switch", WM8580_DAC_CONTROL4, 0, 1, 1, 0),
SOC_DOUBLE("DAC2 Invert Switch", WM8580_DAC_CONTROL4, 2, 3, 1, 0),
SOC_DOUBLE("DAC3 Invert Switch", WM8580_DAC_CONTROL4, 4, 5, 1, 0),
SOC_SINGLE("DAC ZC Switch", WM8580_DAC_CONTROL5, 5, 1, 0),
SOC_SINGLE("DAC1 Switch", WM8580_DAC_CONTROL5, 0, 1, 1),
SOC_SINGLE("DAC2 Switch", WM8580_DAC_CONTROL5, 1, 1, 1),
SOC_SINGLE("DAC3 Switch", WM8580_DAC_CONTROL5, 2, 1, 1),
SOC_DOUBLE("Capture Switch", WM8580_ADC_CONTROL1, 0, 1, 1, 1),
SOC_SINGLE("Capture High-Pass Filter Switch", WM8580_ADC_CONTROL1, 4, 1, 0),
};
static const struct snd_soc_dapm_widget wm8580_dapm_widgets[] = {
SND_SOC_DAPM_DAC("DAC1", "Playback", WM8580_PWRDN1, 2, 1),
SND_SOC_DAPM_DAC("DAC2", "Playback", WM8580_PWRDN1, 3, 1),
SND_SOC_DAPM_DAC("DAC3", "Playback", WM8580_PWRDN1, 4, 1),
SND_SOC_DAPM_OUTPUT("VOUT1L"),
SND_SOC_DAPM_OUTPUT("VOUT1R"),
SND_SOC_DAPM_OUTPUT("VOUT2L"),
SND_SOC_DAPM_OUTPUT("VOUT2R"),
SND_SOC_DAPM_OUTPUT("VOUT3L"),
SND_SOC_DAPM_OUTPUT("VOUT3R"),
SND_SOC_DAPM_ADC("ADC", "Capture", WM8580_PWRDN1, 1, 1),
SND_SOC_DAPM_INPUT("AINL"),
SND_SOC_DAPM_INPUT("AINR"),
};
static const struct snd_soc_dapm_route wm8580_dapm_routes[] = {
{ "VOUT1L", NULL, "DAC1" },
{ "VOUT1R", NULL, "DAC1" },
{ "VOUT2L", NULL, "DAC2" },
{ "VOUT2R", NULL, "DAC2" },
{ "VOUT3L", NULL, "DAC3" },
{ "VOUT3R", NULL, "DAC3" },
{ "ADC", NULL, "AINL" },
{ "ADC", NULL, "AINR" },
};
/* PLL divisors */
struct _pll_div {
u32 prescale:1;
u32 postscale:1;
u32 freqmode:2;
u32 n:4;
u32 k:24;
};
/* The size in bits of the pll divide */
#define FIXED_PLL_SIZE (1 << 22)
/* PLL rate to output rate divisions */
static struct {
unsigned int div;
unsigned int freqmode;
unsigned int postscale;
} post_table[] = {
{ 2, 0, 0 },
{ 4, 0, 1 },
{ 4, 1, 0 },
{ 8, 1, 1 },
{ 8, 2, 0 },
{ 16, 2, 1 },
{ 12, 3, 0 },
{ 24, 3, 1 }
};
static int pll_factors(struct _pll_div *pll_div, unsigned int target,
unsigned int source)
{
u64 Kpart;
unsigned int K, Ndiv, Nmod;
int i;
pr_debug("wm8580: PLL %uHz->%uHz\n", source, target);
/* Scale the output frequency up; the PLL should run in the
* region of 90-100MHz.
*/
for (i = 0; i < ARRAY_SIZE(post_table); i++) {
if (target * post_table[i].div >= 90000000 &&
target * post_table[i].div <= 100000000) {
pll_div->freqmode = post_table[i].freqmode;
pll_div->postscale = post_table[i].postscale;
target *= post_table[i].div;
break;
}
}
if (i == ARRAY_SIZE(post_table)) {
printk(KERN_ERR "wm8580: Unable to scale output frequency "
"%u\n", target);
return -EINVAL;
}
Ndiv = target / source;
if (Ndiv < 5) {
source /= 2;
pll_div->prescale = 1;
Ndiv = target / source;
} else
pll_div->prescale = 0;
if ((Ndiv < 5) || (Ndiv > 13)) {
printk(KERN_ERR
"WM8580 N=%u outside supported range\n", Ndiv);
return -EINVAL;
}
pll_div->n = Ndiv;
Nmod = target % source;
Kpart = FIXED_PLL_SIZE * (long long)Nmod;
do_div(Kpart, source);
K = Kpart & 0xFFFFFFFF;
pll_div->k = K;
pr_debug("PLL %x.%x prescale %d freqmode %d postscale %d\n",
pll_div->n, pll_div->k, pll_div->prescale, pll_div->freqmode,
pll_div->postscale);
return 0;
}
static int wm8580_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
int source, unsigned int freq_in, unsigned int freq_out)
{
int offset;
struct snd_soc_codec *codec = codec_dai->codec;
struct wm8580_priv *wm8580 = snd_soc_codec_get_drvdata(codec);
struct pll_state *state;
struct _pll_div pll_div;
unsigned int reg;
unsigned int pwr_mask;
int ret;
/* GCC isn't able to work out the ifs below for initialising/using
* pll_div so suppress warnings.
*/
memset(&pll_div, 0, sizeof(pll_div));
switch (pll_id) {
case WM8580_PLLA:
state = &wm8580->a;
offset = 0;
pwr_mask = WM8580_PWRDN2_PLLAPD;
break;
case WM8580_PLLB:
state = &wm8580->b;
offset = 4;
pwr_mask = WM8580_PWRDN2_PLLBPD;
break;
default:
return -ENODEV;
}
if (freq_in && freq_out) {
ret = pll_factors(&pll_div, freq_out, freq_in);
if (ret != 0)
return ret;
}
state->in = freq_in;
state->out = freq_out;
/* Always disable the PLL - it is not safe to leave it running
* while reprogramming it.
*/
snd_soc_update_bits(codec, WM8580_PWRDN2, pwr_mask, pwr_mask);
if (!freq_in || !freq_out)
return 0;
snd_soc_write(codec, WM8580_PLLA1 + offset, pll_div.k & 0x1ff);
snd_soc_write(codec, WM8580_PLLA2 + offset, (pll_div.k >> 9) & 0x1ff);
snd_soc_write(codec, WM8580_PLLA3 + offset,
(pll_div.k >> 18 & 0xf) | (pll_div.n << 4));
reg = snd_soc_read(codec, WM8580_PLLA4 + offset);
reg &= ~0x1b;
reg |= pll_div.prescale | pll_div.postscale << 1 |
pll_div.freqmode << 3;
snd_soc_write(codec, WM8580_PLLA4 + offset, reg);
/* All done, turn it on */
snd_soc_update_bits(codec, WM8580_PWRDN2, pwr_mask, 0);
return 0;
}
static const int wm8580_sysclk_ratios[] = {
128, 192, 256, 384, 512, 768, 1152,
};
/*
* Set PCM DAI bit size and sample rate.
*/
static int wm8580_paif_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_codec *codec = rtd->codec;
struct wm8580_priv *wm8580 = snd_soc_codec_get_drvdata(codec);
u16 paifa = 0;
u16 paifb = 0;
int i, ratio, osr;
/* bit size */
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
paifa |= 0x8;
break;
case SNDRV_PCM_FORMAT_S20_3LE:
paifa |= 0x0;
paifb |= WM8580_AIF_LENGTH_20;
break;
case SNDRV_PCM_FORMAT_S24_LE:
paifa |= 0x0;
paifb |= WM8580_AIF_LENGTH_24;
break;
case SNDRV_PCM_FORMAT_S32_LE:
paifa |= 0x0;
paifb |= WM8580_AIF_LENGTH_32;
break;
default:
return -EINVAL;
}
/* Look up the SYSCLK ratio; accept only exact matches */
ratio = wm8580->sysclk[dai->driver->id] / params_rate(params);
for (i = 0; i < ARRAY_SIZE(wm8580_sysclk_ratios); i++)
if (ratio == wm8580_sysclk_ratios[i])
break;
if (i == ARRAY_SIZE(wm8580_sysclk_ratios)) {
dev_err(codec->dev, "Invalid clock ratio %d/%d\n",
wm8580->sysclk[dai->driver->id], params_rate(params));
return -EINVAL;
}
paifa |= i;
dev_dbg(codec->dev, "Running at %dfs with %dHz clock\n",
wm8580_sysclk_ratios[i], wm8580->sysclk[dai->driver->id]);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
switch (ratio) {
case 128:
case 192:
osr = WM8580_DACOSR;
dev_dbg(codec->dev, "Selecting 64x OSR\n");
break;
default:
osr = 0;
dev_dbg(codec->dev, "Selecting 128x OSR\n");
break;
}
snd_soc_update_bits(codec, WM8580_PAIF3, WM8580_DACOSR, osr);
}
snd_soc_update_bits(codec, WM8580_PAIF1 + dai->driver->id,
WM8580_AIF_RATE_MASK | WM8580_AIF_BCLKSEL_MASK,
paifa);
snd_soc_update_bits(codec, WM8580_PAIF3 + dai->driver->id,
WM8580_AIF_LENGTH_MASK, paifb);
return 0;
}
static int wm8580_set_paif_dai_fmt(struct snd_soc_dai *codec_dai,
unsigned int fmt)
{
struct snd_soc_codec *codec = codec_dai->codec;
unsigned int aifa;
unsigned int aifb;
int can_invert_lrclk;
aifa = snd_soc_read(codec, WM8580_PAIF1 + codec_dai->driver->id);
aifb = snd_soc_read(codec, WM8580_PAIF3 + codec_dai->driver->id);
aifb &= ~(WM8580_AIF_FMT_MASK | WM8580_AIF_LRP | WM8580_AIF_BCP);
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBS_CFS:
aifa &= ~WM8580_AIF_MS;
break;
case SND_SOC_DAIFMT_CBM_CFM:
aifa |= WM8580_AIF_MS;
break;
default:
return -EINVAL;
}
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
can_invert_lrclk = 1;
aifb |= WM8580_AIF_FMT_I2S;
break;
case SND_SOC_DAIFMT_RIGHT_J:
can_invert_lrclk = 1;
aifb |= WM8580_AIF_FMT_RIGHTJ;
break;
case SND_SOC_DAIFMT_LEFT_J:
can_invert_lrclk = 1;
aifb |= WM8580_AIF_FMT_LEFTJ;
break;
case SND_SOC_DAIFMT_DSP_A:
can_invert_lrclk = 0;
aifb |= WM8580_AIF_FMT_DSP;
break;
case SND_SOC_DAIFMT_DSP_B:
can_invert_lrclk = 0;
aifb |= WM8580_AIF_FMT_DSP;
aifb |= WM8580_AIF_LRP;
break;
default:
return -EINVAL;
}
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
break;
case SND_SOC_DAIFMT_IB_IF:
if (!can_invert_lrclk)
return -EINVAL;
aifb |= WM8580_AIF_BCP;
aifb |= WM8580_AIF_LRP;
break;
case SND_SOC_DAIFMT_IB_NF:
aifb |= WM8580_AIF_BCP;
break;
case SND_SOC_DAIFMT_NB_IF:
if (!can_invert_lrclk)
return -EINVAL;
aifb |= WM8580_AIF_LRP;
break;
default:
return -EINVAL;
}
snd_soc_write(codec, WM8580_PAIF1 + codec_dai->driver->id, aifa);
snd_soc_write(codec, WM8580_PAIF3 + codec_dai->driver->id, aifb);
return 0;
}
static int wm8580_set_dai_clkdiv(struct snd_soc_dai *codec_dai,
int div_id, int div)
{
struct snd_soc_codec *codec = codec_dai->codec;
unsigned int reg;
switch (div_id) {
case WM8580_MCLK:
reg = snd_soc_read(codec, WM8580_PLLB4);
reg &= ~WM8580_PLLB4_MCLKOUTSRC_MASK;
switch (div) {
case WM8580_CLKSRC_MCLK:
/* Input */
break;
case WM8580_CLKSRC_PLLA:
reg |= WM8580_PLLB4_MCLKOUTSRC_PLLA;
break;
case WM8580_CLKSRC_PLLB:
reg |= WM8580_PLLB4_MCLKOUTSRC_PLLB;
break;
case WM8580_CLKSRC_OSC:
reg |= WM8580_PLLB4_MCLKOUTSRC_OSC;
break;
default:
return -EINVAL;
}
snd_soc_write(codec, WM8580_PLLB4, reg);
break;
case WM8580_CLKOUTSRC:
reg = snd_soc_read(codec, WM8580_PLLB4);
reg &= ~WM8580_PLLB4_CLKOUTSRC_MASK;
switch (div) {
case WM8580_CLKSRC_NONE:
break;
case WM8580_CLKSRC_PLLA:
reg |= WM8580_PLLB4_CLKOUTSRC_PLLACLK;
break;
case WM8580_CLKSRC_PLLB:
reg |= WM8580_PLLB4_CLKOUTSRC_PLLBCLK;
break;
case WM8580_CLKSRC_OSC:
reg |= WM8580_PLLB4_CLKOUTSRC_OSCCLK;
break;
default:
return -EINVAL;
}
snd_soc_write(codec, WM8580_PLLB4, reg);
break;
default:
return -EINVAL;
}
return 0;
}
static int wm8580_set_sysclk(struct snd_soc_dai *dai, int clk_id,
unsigned int freq, int dir)
{
struct snd_soc_codec *codec = dai->codec;
struct wm8580_priv *wm8580 = snd_soc_codec_get_drvdata(codec);
int ret, sel, sel_mask, sel_shift;
switch (dai->driver->id) {
case WM8580_DAI_PAIFRX:
sel_mask = 0x3;
sel_shift = 0;
break;
case WM8580_DAI_PAIFTX:
sel_mask = 0xc;
sel_shift = 2;
break;
default:
BUG_ON("Unknown DAI driver ID\n");
return -EINVAL;
}
switch (clk_id) {
case WM8580_CLKSRC_ADCMCLK:
if (dai->driver->id != WM8580_DAI_PAIFTX)
return -EINVAL;
sel = 0 << sel_shift;
break;
case WM8580_CLKSRC_PLLA:
sel = 1 << sel_shift;
break;
case WM8580_CLKSRC_PLLB:
sel = 2 << sel_shift;
break;
case WM8580_CLKSRC_MCLK:
sel = 3 << sel_shift;
break;
default:
dev_err(codec->dev, "Unknown clock %d\n", clk_id);
return -EINVAL;
}
/* We really should validate PLL settings but not yet */
wm8580->sysclk[dai->driver->id] = freq;
ret = snd_soc_update_bits(codec, WM8580_CLKSEL, sel_mask, sel);
if (ret < 0)
return ret;
return 0;
}
static int wm8580_digital_mute(struct snd_soc_dai *codec_dai, int mute)
{
struct snd_soc_codec *codec = codec_dai->codec;
unsigned int reg;
reg = snd_soc_read(codec, WM8580_DAC_CONTROL5);
if (mute)
reg |= WM8580_DAC_CONTROL5_MUTEALL;
else
reg &= ~WM8580_DAC_CONTROL5_MUTEALL;
snd_soc_write(codec, WM8580_DAC_CONTROL5, reg);
return 0;
}
static int wm8580_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
switch (level) {
case SND_SOC_BIAS_ON:
case SND_SOC_BIAS_PREPARE:
break;
case SND_SOC_BIAS_STANDBY:
if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
/* Power up and get individual control of the DACs */
snd_soc_update_bits(codec, WM8580_PWRDN1,
WM8580_PWRDN1_PWDN |
WM8580_PWRDN1_ALLDACPD, 0);
/* Make VMID high impedance */
snd_soc_update_bits(codec, WM8580_ADC_CONTROL1,
0x100, 0);
}
break;
case SND_SOC_BIAS_OFF:
snd_soc_update_bits(codec, WM8580_PWRDN1,
WM8580_PWRDN1_PWDN, WM8580_PWRDN1_PWDN);
break;
}
codec->dapm.bias_level = level;
return 0;
}
#define WM8580_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
static const struct snd_soc_dai_ops wm8580_dai_ops_playback = {
.set_sysclk = wm8580_set_sysclk,
.hw_params = wm8580_paif_hw_params,
.set_fmt = wm8580_set_paif_dai_fmt,
.set_clkdiv = wm8580_set_dai_clkdiv,
.set_pll = wm8580_set_dai_pll,
.digital_mute = wm8580_digital_mute,
};
static const struct snd_soc_dai_ops wm8580_dai_ops_capture = {
.set_sysclk = wm8580_set_sysclk,
.hw_params = wm8580_paif_hw_params,
.set_fmt = wm8580_set_paif_dai_fmt,
.set_clkdiv = wm8580_set_dai_clkdiv,
.set_pll = wm8580_set_dai_pll,
};
static struct snd_soc_dai_driver wm8580_dai[] = {
{
.name = "wm8580-hifi-playback",
.id = WM8580_DAI_PAIFRX,
.playback = {
.stream_name = "Playback",
.channels_min = 1,
.channels_max = 6,
.rates = SNDRV_PCM_RATE_8000_192000,
.formats = WM8580_FORMATS,
},
.ops = &wm8580_dai_ops_playback,
},
{
.name = "wm8580-hifi-capture",
.id = WM8580_DAI_PAIFTX,
.capture = {
.stream_name = "Capture",
.channels_min = 2,
.channels_max = 2,
.rates = SNDRV_PCM_RATE_8000_192000,
.formats = WM8580_FORMATS,
},
.ops = &wm8580_dai_ops_capture,
},
};
static int wm8580_probe(struct snd_soc_codec *codec)
{
struct wm8580_priv *wm8580 = snd_soc_codec_get_drvdata(codec);
int ret = 0;
ret = snd_soc_codec_set_cache_io(codec, 7, 9, SND_SOC_REGMAP);
if (ret < 0) {
dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
return ret;
}
ret = regulator_bulk_enable(ARRAY_SIZE(wm8580->supplies),
wm8580->supplies);
if (ret != 0) {
dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
goto err_regulator_get;
}
/* Get the codec into a known state */
ret = snd_soc_write(codec, WM8580_RESET, 0);
if (ret != 0) {
dev_err(codec->dev, "Failed to reset codec: %d\n", ret);
goto err_regulator_enable;
}
wm8580_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
return 0;
err_regulator_enable:
regulator_bulk_disable(ARRAY_SIZE(wm8580->supplies), wm8580->supplies);
err_regulator_get:
return ret;
}
/* power down chip */
static int wm8580_remove(struct snd_soc_codec *codec)
{
struct wm8580_priv *wm8580 = snd_soc_codec_get_drvdata(codec);
wm8580_set_bias_level(codec, SND_SOC_BIAS_OFF);
regulator_bulk_disable(ARRAY_SIZE(wm8580->supplies), wm8580->supplies);
return 0;
}
static struct snd_soc_codec_driver soc_codec_dev_wm8580 = {
.probe = wm8580_probe,
.remove = wm8580_remove,
.set_bias_level = wm8580_set_bias_level,
.controls = wm8580_snd_controls,
.num_controls = ARRAY_SIZE(wm8580_snd_controls),
.dapm_widgets = wm8580_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(wm8580_dapm_widgets),
.dapm_routes = wm8580_dapm_routes,
.num_dapm_routes = ARRAY_SIZE(wm8580_dapm_routes),
};
static const struct of_device_id wm8580_of_match[] = {
{ .compatible = "wlf,wm8580" },
{ },
};
static const struct regmap_config wm8580_regmap = {
.reg_bits = 7,
.val_bits = 9,
.max_register = WM8580_MAX_REGISTER,
.reg_defaults = wm8580_reg_defaults,
.num_reg_defaults = ARRAY_SIZE(wm8580_reg_defaults),
.cache_type = REGCACHE_RBTREE,
.volatile_reg = wm8580_volatile,
};
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
static int wm8580_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct wm8580_priv *wm8580;
int ret, i;
wm8580 = devm_kzalloc(&i2c->dev, sizeof(struct wm8580_priv),
GFP_KERNEL);
if (wm8580 == NULL)
return -ENOMEM;
wm8580->regmap = devm_regmap_init_i2c(i2c, &wm8580_regmap);
if (IS_ERR(wm8580->regmap))
return PTR_ERR(wm8580->regmap);
for (i = 0; i < ARRAY_SIZE(wm8580->supplies); i++)
wm8580->supplies[i].supply = wm8580_supply_names[i];
ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(wm8580->supplies),
wm8580->supplies);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret);
return ret;
}
i2c_set_clientdata(i2c, wm8580);
ret = snd_soc_register_codec(&i2c->dev,
&soc_codec_dev_wm8580, wm8580_dai, ARRAY_SIZE(wm8580_dai));
return ret;
}
static int wm8580_i2c_remove(struct i2c_client *client)
{
snd_soc_unregister_codec(&client->dev);
return 0;
}
static const struct i2c_device_id wm8580_i2c_id[] = {
{ "wm8580", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, wm8580_i2c_id);
static struct i2c_driver wm8580_i2c_driver = {
.driver = {
.name = "wm8580",
.owner = THIS_MODULE,
.of_match_table = wm8580_of_match,
},
.probe = wm8580_i2c_probe,
.remove = wm8580_i2c_remove,
.id_table = wm8580_i2c_id,
};
#endif
static int __init wm8580_modinit(void)
{
int ret = 0;
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
ret = i2c_add_driver(&wm8580_i2c_driver);
if (ret != 0) {
pr_err("Failed to register WM8580 I2C driver: %d\n", ret);
}
#endif
return ret;
}
module_init(wm8580_modinit);
static void __exit wm8580_exit(void)
{
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
i2c_del_driver(&wm8580_i2c_driver);
#endif
}
module_exit(wm8580_exit);
MODULE_DESCRIPTION("ASoC WM8580 driver");
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
MODULE_LICENSE("GPL");