1b5b23718b
This was tested on a EFM32GG-DK3750 devboard that has a temperature sensor and an eeprom on its i2c bus. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
482 lines
12 KiB
C
482 lines
12 KiB
C
/*
|
|
* Copyright (C) 2014 Uwe Kleine-Koenig for Pengutronix
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it under
|
|
* the terms of the GNU General Public License version 2 as published by the
|
|
* Free Software Foundation.
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/io.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk.h>
|
|
|
|
#define DRIVER_NAME "efm32-i2c"
|
|
|
|
#define MASK_VAL(mask, val) ((val << __ffs(mask)) & mask)
|
|
|
|
#define REG_CTRL 0x00
|
|
#define REG_CTRL_EN 0x00001
|
|
#define REG_CTRL_SLAVE 0x00002
|
|
#define REG_CTRL_AUTOACK 0x00004
|
|
#define REG_CTRL_AUTOSE 0x00008
|
|
#define REG_CTRL_AUTOSN 0x00010
|
|
#define REG_CTRL_ARBDIS 0x00020
|
|
#define REG_CTRL_GCAMEN 0x00040
|
|
#define REG_CTRL_CLHR__MASK 0x00300
|
|
#define REG_CTRL_BITO__MASK 0x03000
|
|
#define REG_CTRL_BITO_OFF 0x00000
|
|
#define REG_CTRL_BITO_40PCC 0x01000
|
|
#define REG_CTRL_BITO_80PCC 0x02000
|
|
#define REG_CTRL_BITO_160PCC 0x03000
|
|
#define REG_CTRL_GIBITO 0x08000
|
|
#define REG_CTRL_CLTO__MASK 0x70000
|
|
#define REG_CTRL_CLTO_OFF 0x00000
|
|
|
|
#define REG_CMD 0x04
|
|
#define REG_CMD_START 0x00001
|
|
#define REG_CMD_STOP 0x00002
|
|
#define REG_CMD_ACK 0x00004
|
|
#define REG_CMD_NACK 0x00008
|
|
#define REG_CMD_CONT 0x00010
|
|
#define REG_CMD_ABORT 0x00020
|
|
#define REG_CMD_CLEARTX 0x00040
|
|
#define REG_CMD_CLEARPC 0x00080
|
|
|
|
#define REG_STATE 0x08
|
|
#define REG_STATE_BUSY 0x00001
|
|
#define REG_STATE_MASTER 0x00002
|
|
#define REG_STATE_TRANSMITTER 0x00004
|
|
#define REG_STATE_NACKED 0x00008
|
|
#define REG_STATE_BUSHOLD 0x00010
|
|
#define REG_STATE_STATE__MASK 0x000e0
|
|
#define REG_STATE_STATE_IDLE 0x00000
|
|
#define REG_STATE_STATE_WAIT 0x00020
|
|
#define REG_STATE_STATE_START 0x00040
|
|
#define REG_STATE_STATE_ADDR 0x00060
|
|
#define REG_STATE_STATE_ADDRACK 0x00080
|
|
#define REG_STATE_STATE_DATA 0x000a0
|
|
#define REG_STATE_STATE_DATAACK 0x000c0
|
|
|
|
#define REG_STATUS 0x0c
|
|
#define REG_STATUS_PSTART 0x00001
|
|
#define REG_STATUS_PSTOP 0x00002
|
|
#define REG_STATUS_PACK 0x00004
|
|
#define REG_STATUS_PNACK 0x00008
|
|
#define REG_STATUS_PCONT 0x00010
|
|
#define REG_STATUS_PABORT 0x00020
|
|
#define REG_STATUS_TXC 0x00040
|
|
#define REG_STATUS_TXBL 0x00080
|
|
#define REG_STATUS_RXDATAV 0x00100
|
|
|
|
#define REG_CLKDIV 0x10
|
|
#define REG_CLKDIV_DIV__MASK 0x001ff
|
|
#define REG_CLKDIV_DIV(div) MASK_VAL(REG_CLKDIV_DIV__MASK, (div))
|
|
|
|
#define REG_SADDR 0x14
|
|
#define REG_SADDRMASK 0x18
|
|
#define REG_RXDATA 0x1c
|
|
#define REG_RXDATAP 0x20
|
|
#define REG_TXDATA 0x24
|
|
#define REG_IF 0x28
|
|
#define REG_IF_START 0x00001
|
|
#define REG_IF_RSTART 0x00002
|
|
#define REG_IF_ADDR 0x00004
|
|
#define REG_IF_TXC 0x00008
|
|
#define REG_IF_TXBL 0x00010
|
|
#define REG_IF_RXDATAV 0x00020
|
|
#define REG_IF_ACK 0x00040
|
|
#define REG_IF_NACK 0x00080
|
|
#define REG_IF_MSTOP 0x00100
|
|
#define REG_IF_ARBLOST 0x00200
|
|
#define REG_IF_BUSERR 0x00400
|
|
#define REG_IF_BUSHOLD 0x00800
|
|
#define REG_IF_TXOF 0x01000
|
|
#define REG_IF_RXUF 0x02000
|
|
#define REG_IF_BITO 0x04000
|
|
#define REG_IF_CLTO 0x08000
|
|
#define REG_IF_SSTOP 0x10000
|
|
|
|
#define REG_IFS 0x2c
|
|
#define REG_IFC 0x30
|
|
#define REG_IFC__MASK 0x1ffcf
|
|
|
|
#define REG_IEN 0x34
|
|
|
|
#define REG_ROUTE 0x38
|
|
#define REG_ROUTE_SDAPEN 0x00001
|
|
#define REG_ROUTE_SCLPEN 0x00002
|
|
#define REG_ROUTE_LOCATION__MASK 0x00700
|
|
#define REG_ROUTE_LOCATION(n) MASK_VAL(REG_ROUTE_LOCATION__MASK, (n))
|
|
|
|
struct efm32_i2c_ddata {
|
|
struct i2c_adapter adapter;
|
|
|
|
struct clk *clk;
|
|
void __iomem *base;
|
|
unsigned int irq;
|
|
u8 location;
|
|
unsigned long frequency;
|
|
|
|
/* transfer data */
|
|
struct completion done;
|
|
struct i2c_msg *msgs;
|
|
size_t num_msgs;
|
|
size_t current_word, current_msg;
|
|
int retval;
|
|
};
|
|
|
|
static u32 efm32_i2c_read32(struct efm32_i2c_ddata *ddata, unsigned offset)
|
|
{
|
|
return readl(ddata->base + offset);
|
|
}
|
|
|
|
static void efm32_i2c_write32(struct efm32_i2c_ddata *ddata,
|
|
unsigned offset, u32 value)
|
|
{
|
|
writel(value, ddata->base + offset);
|
|
}
|
|
|
|
static void efm32_i2c_send_next_msg(struct efm32_i2c_ddata *ddata)
|
|
{
|
|
struct i2c_msg *cur_msg = &ddata->msgs[ddata->current_msg];
|
|
|
|
efm32_i2c_write32(ddata, REG_CMD, REG_CMD_START);
|
|
efm32_i2c_write32(ddata, REG_TXDATA, cur_msg->addr << 1 |
|
|
(cur_msg->flags & I2C_M_RD ? 1 : 0));
|
|
}
|
|
|
|
static void efm32_i2c_send_next_byte(struct efm32_i2c_ddata *ddata)
|
|
{
|
|
struct i2c_msg *cur_msg = &ddata->msgs[ddata->current_msg];
|
|
|
|
if (ddata->current_word >= cur_msg->len) {
|
|
/* cur_msg completely transferred */
|
|
ddata->current_word = 0;
|
|
ddata->current_msg += 1;
|
|
|
|
if (ddata->current_msg >= ddata->num_msgs) {
|
|
efm32_i2c_write32(ddata, REG_CMD, REG_CMD_STOP);
|
|
complete(&ddata->done);
|
|
} else {
|
|
efm32_i2c_send_next_msg(ddata);
|
|
}
|
|
} else {
|
|
efm32_i2c_write32(ddata, REG_TXDATA,
|
|
cur_msg->buf[ddata->current_word++]);
|
|
}
|
|
}
|
|
|
|
static void efm32_i2c_recv_next_byte(struct efm32_i2c_ddata *ddata)
|
|
{
|
|
struct i2c_msg *cur_msg = &ddata->msgs[ddata->current_msg];
|
|
|
|
cur_msg->buf[ddata->current_word] = efm32_i2c_read32(ddata, REG_RXDATA);
|
|
ddata->current_word += 1;
|
|
if (ddata->current_word >= cur_msg->len) {
|
|
/* cur_msg completely transferred */
|
|
ddata->current_word = 0;
|
|
ddata->current_msg += 1;
|
|
|
|
efm32_i2c_write32(ddata, REG_CMD, REG_CMD_NACK);
|
|
|
|
if (ddata->current_msg >= ddata->num_msgs) {
|
|
efm32_i2c_write32(ddata, REG_CMD, REG_CMD_STOP);
|
|
complete(&ddata->done);
|
|
} else {
|
|
efm32_i2c_send_next_msg(ddata);
|
|
}
|
|
} else {
|
|
efm32_i2c_write32(ddata, REG_CMD, REG_CMD_ACK);
|
|
}
|
|
}
|
|
|
|
static irqreturn_t efm32_i2c_irq(int irq, void *dev_id)
|
|
{
|
|
struct efm32_i2c_ddata *ddata = dev_id;
|
|
struct i2c_msg *cur_msg = &ddata->msgs[ddata->current_msg];
|
|
u32 irqflag = efm32_i2c_read32(ddata, REG_IF);
|
|
u32 state = efm32_i2c_read32(ddata, REG_STATE);
|
|
|
|
efm32_i2c_write32(ddata, REG_IFC, irqflag & REG_IFC__MASK);
|
|
|
|
switch (state & REG_STATE_STATE__MASK) {
|
|
case REG_STATE_STATE_IDLE:
|
|
/* arbitration lost? */
|
|
ddata->retval = -EAGAIN;
|
|
complete(&ddata->done);
|
|
break;
|
|
case REG_STATE_STATE_WAIT:
|
|
/*
|
|
* huh, this shouldn't happen.
|
|
* Reset hardware state and get out
|
|
*/
|
|
ddata->retval = -EIO;
|
|
efm32_i2c_write32(ddata, REG_CMD,
|
|
REG_CMD_STOP | REG_CMD_ABORT |
|
|
REG_CMD_CLEARTX | REG_CMD_CLEARPC);
|
|
complete(&ddata->done);
|
|
break;
|
|
case REG_STATE_STATE_START:
|
|
/* "caller" is expected to send an address */
|
|
break;
|
|
case REG_STATE_STATE_ADDR:
|
|
/* wait for Ack or NAck of slave */
|
|
break;
|
|
case REG_STATE_STATE_ADDRACK:
|
|
if (state & REG_STATE_NACKED) {
|
|
efm32_i2c_write32(ddata, REG_CMD, REG_CMD_STOP);
|
|
ddata->retval = -ENXIO;
|
|
complete(&ddata->done);
|
|
} else if (cur_msg->flags & I2C_M_RD) {
|
|
/* wait for slave to send first data byte */
|
|
} else {
|
|
efm32_i2c_send_next_byte(ddata);
|
|
}
|
|
break;
|
|
case REG_STATE_STATE_DATA:
|
|
if (cur_msg->flags & I2C_M_RD) {
|
|
efm32_i2c_recv_next_byte(ddata);
|
|
} else {
|
|
/* wait for Ack or Nack of slave */
|
|
}
|
|
break;
|
|
case REG_STATE_STATE_DATAACK:
|
|
if (state & REG_STATE_NACKED) {
|
|
efm32_i2c_write32(ddata, REG_CMD, REG_CMD_STOP);
|
|
complete(&ddata->done);
|
|
} else {
|
|
efm32_i2c_send_next_byte(ddata);
|
|
}
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int efm32_i2c_master_xfer(struct i2c_adapter *adap,
|
|
struct i2c_msg *msgs, int num)
|
|
{
|
|
struct efm32_i2c_ddata *ddata = i2c_get_adapdata(adap);
|
|
int ret;
|
|
|
|
if (ddata->msgs)
|
|
return -EBUSY;
|
|
|
|
ddata->msgs = msgs;
|
|
ddata->num_msgs = num;
|
|
ddata->current_word = 0;
|
|
ddata->current_msg = 0;
|
|
ddata->retval = -EIO;
|
|
|
|
reinit_completion(&ddata->done);
|
|
|
|
dev_dbg(&ddata->adapter.dev, "state: %08x, status: %08x\n",
|
|
efm32_i2c_read32(ddata, REG_STATE),
|
|
efm32_i2c_read32(ddata, REG_STATUS));
|
|
|
|
efm32_i2c_send_next_msg(ddata);
|
|
|
|
wait_for_completion(&ddata->done);
|
|
|
|
if (ddata->current_msg >= ddata->num_msgs)
|
|
ret = ddata->num_msgs;
|
|
else
|
|
ret = ddata->retval;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static u32 efm32_i2c_functionality(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
|
|
}
|
|
|
|
static const struct i2c_algorithm efm32_i2c_algo = {
|
|
.master_xfer = efm32_i2c_master_xfer,
|
|
.functionality = efm32_i2c_functionality,
|
|
};
|
|
|
|
static u32 efm32_i2c_get_configured_location(struct efm32_i2c_ddata *ddata)
|
|
{
|
|
u32 reg = efm32_i2c_read32(ddata, REG_ROUTE);
|
|
|
|
return (reg & REG_ROUTE_LOCATION__MASK) >>
|
|
__ffs(REG_ROUTE_LOCATION__MASK);
|
|
}
|
|
|
|
static int efm32_i2c_probe(struct platform_device *pdev)
|
|
{
|
|
struct efm32_i2c_ddata *ddata;
|
|
struct resource *res;
|
|
unsigned long rate;
|
|
struct device_node *np = pdev->dev.of_node;
|
|
u32 location, frequency;
|
|
int ret;
|
|
u32 clkdiv;
|
|
|
|
if (!np)
|
|
return -EINVAL;
|
|
|
|
ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
|
|
if (!ddata) {
|
|
dev_dbg(&pdev->dev, "failed to allocate private data\n");
|
|
return -ENOMEM;
|
|
}
|
|
platform_set_drvdata(pdev, ddata);
|
|
|
|
init_completion(&ddata->done);
|
|
strlcpy(ddata->adapter.name, pdev->name, sizeof(ddata->adapter.name));
|
|
ddata->adapter.owner = THIS_MODULE;
|
|
ddata->adapter.algo = &efm32_i2c_algo;
|
|
ddata->adapter.dev.parent = &pdev->dev;
|
|
ddata->adapter.dev.of_node = pdev->dev.of_node;
|
|
i2c_set_adapdata(&ddata->adapter, ddata);
|
|
|
|
ddata->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(ddata->clk)) {
|
|
ret = PTR_ERR(ddata->clk);
|
|
dev_err(&pdev->dev, "failed to get clock: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res) {
|
|
dev_err(&pdev->dev, "failed to determine base address\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (resource_size(res) < 0x42) {
|
|
dev_err(&pdev->dev, "memory resource too small\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ddata->base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(ddata->base))
|
|
return PTR_ERR(ddata->base);
|
|
|
|
ret = platform_get_irq(pdev, 0);
|
|
if (ret <= 0) {
|
|
dev_err(&pdev->dev, "failed to get irq (%d)\n", ret);
|
|
if (!ret)
|
|
ret = -EINVAL;
|
|
return ret;
|
|
}
|
|
|
|
ddata->irq = ret;
|
|
|
|
ret = clk_prepare_enable(ddata->clk);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "failed to enable clock (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = of_property_read_u32(np, "efm32,location", &location);
|
|
if (!ret) {
|
|
dev_dbg(&pdev->dev, "using location %u\n", location);
|
|
} else {
|
|
/* default to location configured in hardware */
|
|
location = efm32_i2c_get_configured_location(ddata);
|
|
|
|
dev_info(&pdev->dev, "fall back to location %u\n", location);
|
|
}
|
|
|
|
ddata->location = location;
|
|
|
|
ret = of_property_read_u32(np, "clock-frequency", &frequency);
|
|
if (!ret) {
|
|
dev_dbg(&pdev->dev, "using frequency %u\n", frequency);
|
|
} else {
|
|
frequency = 100000;
|
|
dev_info(&pdev->dev, "defaulting to 100 kHz\n");
|
|
}
|
|
ddata->frequency = frequency;
|
|
|
|
rate = clk_get_rate(ddata->clk);
|
|
if (!rate) {
|
|
dev_err(&pdev->dev, "there is no input clock available\n");
|
|
ret = -EINVAL;
|
|
goto err_disable_clk;
|
|
}
|
|
clkdiv = DIV_ROUND_UP(rate, 8 * ddata->frequency) - 1;
|
|
if (clkdiv >= 0x200) {
|
|
dev_err(&pdev->dev,
|
|
"input clock too fast (%lu) to divide down to bus freq (%lu)",
|
|
rate, ddata->frequency);
|
|
ret = -EINVAL;
|
|
goto err_disable_clk;
|
|
}
|
|
|
|
dev_dbg(&pdev->dev, "input clock = %lu, bus freq = %lu, clkdiv = %lu\n",
|
|
rate, ddata->frequency, (unsigned long)clkdiv);
|
|
efm32_i2c_write32(ddata, REG_CLKDIV, REG_CLKDIV_DIV(clkdiv));
|
|
|
|
efm32_i2c_write32(ddata, REG_ROUTE, REG_ROUTE_SDAPEN |
|
|
REG_ROUTE_SCLPEN |
|
|
REG_ROUTE_LOCATION(ddata->location));
|
|
|
|
efm32_i2c_write32(ddata, REG_CTRL, REG_CTRL_EN |
|
|
REG_CTRL_BITO_160PCC | 0 * REG_CTRL_GIBITO);
|
|
|
|
efm32_i2c_write32(ddata, REG_IFC, REG_IFC__MASK);
|
|
efm32_i2c_write32(ddata, REG_IEN, REG_IF_TXC | REG_IF_ACK | REG_IF_NACK
|
|
| REG_IF_ARBLOST | REG_IF_BUSERR | REG_IF_RXDATAV);
|
|
|
|
/* to make bus idle */
|
|
efm32_i2c_write32(ddata, REG_CMD, REG_CMD_ABORT);
|
|
|
|
ret = request_irq(ddata->irq, efm32_i2c_irq, 0, DRIVER_NAME, ddata);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "failed to request irq (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = i2c_add_adapter(&ddata->adapter);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to add i2c adapter (%d)\n", ret);
|
|
free_irq(ddata->irq, ddata);
|
|
|
|
err_disable_clk:
|
|
clk_disable_unprepare(ddata->clk);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int efm32_i2c_remove(struct platform_device *pdev)
|
|
{
|
|
struct efm32_i2c_ddata *ddata = platform_get_drvdata(pdev);
|
|
|
|
i2c_del_adapter(&ddata->adapter);
|
|
free_irq(ddata->irq, ddata);
|
|
clk_disable_unprepare(ddata->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id efm32_i2c_dt_ids[] = {
|
|
{
|
|
.compatible = "energymicro,efm32-i2c",
|
|
}, {
|
|
/* sentinel */
|
|
}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, efm32_i2c_dt_ids);
|
|
|
|
static struct platform_driver efm32_i2c_driver = {
|
|
.probe = efm32_i2c_probe,
|
|
.remove = efm32_i2c_remove,
|
|
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = efm32_i2c_dt_ids,
|
|
},
|
|
};
|
|
module_platform_driver(efm32_i2c_driver);
|
|
|
|
MODULE_AUTHOR("Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>");
|
|
MODULE_DESCRIPTION("EFM32 i2c driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:" DRIVER_NAME);
|