kernel-ark/arch/arm/mach-pxa
Linus Torvalds c0fa2373f8 The clk tree changes for 3.18 are dominated by clock drivers. Mostly
fixes and enhancements to existing drivers as well as new drivers. This
 tag contains a bit more arch code than I usually take due to some OMAP2+
 changes. Additionally it contains the restart notifier handlers which
 are merged as a dependency into several trees.
 
 The PXA changes are the only messy part. Due to having a stable tree I
 had to revert one patch and follow up with one more fix near the tip of
 this tag. Some dead code is introduced but it will soon become live code
 after 3.18-rc1 is released as the rest of the PXA family is converted
 over to the common clock framework.
 
 Another trend in this tag is that multiple vendors have started to push
 the complexity of changing their CPU frequency into the clock driver,
 whereas this used to be done in CPUfreq drivers.
 
 Changes to the clk core include a generic gpio-clock type and a
 clk_set_phase() function added to the top-level clk.h api. Due to some
 confusion on the fbdev mailing list the kernel boot parameters
 documentation was updated to further explain the clk_ignore_unused
 parameter, which is often required by users of the simplefb driver.
 Finally some fixes to the locking around the clock debugfs stuff was
 done to prevent deadlocks when interacting with other subsystems.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJUMu8gAAoJEDqPOy9afJhJ+GwP/3aU1PzhEPooZ3sZ5hkhmRYc
 RTzNZAODuOGbGnAiNQcr8XW3LJ6wKz5TSzzUC8IQkTcYM1Tsc7s5B6v+nMOkR2Jh
 sfrlnDEV/dsW9/3QADFuBowCaZdsaZnHn96RDhTmyDlPjh4HRR2k8ITT+TREbFrd
 cHDWy4QnI0u4NzhKtitvgW2770HyBpr31v5IdoRhVi5whoiBNL49BPwhwDWhwZVe
 w6qvc0jV8FK9Ra/Q7Vw6r3tiKkpO/upqVFDrsO831mp2qDcQvtOgNW9H2fjcobaX
 3/KCbs1TZs39e71RsEGwCvmCudXkTgO1wUJ86MuCLHeb2o78Vx8EYie02/RApTOJ
 0KGR+kFouggy2naeH8pXiTZk2HWMCbut6NQ1+AVbea5Em7hgHbYaQN71wVFKR4L7
 QL+TugrIg81fGWSvxoTo6fsbEiKOUdhXvHFWP5etKHL+Ll+7ku05ojHLOZgEEwTf
 zFWSSF4XSFQtuQD1gup0pSfoLs6qVR57l8FsrxfRPK9jGttg5z1wyNkY+585ptim
 eyTn4mkvkx9t9Sx47VRj9WPcPr2SW1w8lTMw1WqKfHG7AEUJHHkRQThQmiU82b47
 dTls4BBZ6sVZ8wj0V4zvnvbmtdYohOmBqNDEYx+a0dzPKstcAJyZgcjWBc13zds4
 rIKKxhiU7jGWH4qnJLrx
 =w2rN
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus-3.18' of git://git.linaro.org/people/mike.turquette/linux

Pull clock tree updates from Mike Turquette:
 "The clk tree changes for 3.18 are dominated by clock drivers.  Mostly
  fixes and enhancements to existing drivers as well as new drivers.
  This tag contains a bit more arch code than I usually take due to some
  OMAP2+ changes.  Additionally it contains the restart notifier
  handlers which are merged as a dependency into several trees.

  The PXA changes are the only messy part.  Due to having a stable tree
  I had to revert one patch and follow up with one more fix near the tip
  of this tag.  Some dead code is introduced but it will soon become
  live code after 3.18-rc1 is released as the rest of the PXA family is
  converted over to the common clock framework.

  Another trend in this tag is that multiple vendors have started to
  push the complexity of changing their CPU frequency into the clock
  driver, whereas this used to be done in CPUfreq drivers.

  Changes to the clk core include a generic gpio-clock type and a
  clk_set_phase() function added to the top-level clk.h api.  Due to
  some confusion on the fbdev mailing list the kernel boot parameters
  documentation was updated to further explain the clk_ignore_unused
  parameter, which is often required by users of the simplefb driver.

  Finally some fixes to the locking around the clock debugfs stuff was
  done to prevent deadlocks when interacting with other subsystems."

* tag 'clk-for-linus-3.18' of git://git.linaro.org/people/mike.turquette/linux: (99 commits)
  clk: pxa clocks build system fix
  Revert "arm: pxa: Transition pxa27x to clk framework"
  clk: samsung: register restart handlers for s3c2412 and s3c2443
  clk: rockchip: add restart handler
  clk: rockchip: rk3288: i2s_frac adds flag to set parent's rate
  doc/kernel-parameters.txt: clarify clk_ignore_unused
  arm: pxa: Transition pxa27x to clk framework
  dts: add devicetree bindings for pxa27x clocks
  clk: add pxa27x clock drivers
  arm: pxa: add clock pll selection bits
  clk: dts: document pxa clock binding
  clk: add pxa clocks infrastructure
  clk: gpio-gate: Ensure gpiod_ APIs are prototyped
  clk: ti: dra7-atl-clock: Mark the device as pm_runtime_irq_safe
  clk: ti: LLVMLinux: Move __init outside of type definition
  clk: ti: consider the fact that of_clk_get() might return an error
  clk: ti: dra7-atl-clock: fix a memory leak
  clk: ti: change clock init to use generic of_clk_init
  clk: hix5hd2: add I2C clocks
  clk: hix5hd2: add watchdog0 clocks
  ...
2014-10-15 07:05:03 +02:00
..
include/mach arm: pxa: add clock pll selection bits 2014-09-30 12:31:31 -07:00
am200epd.c ARM: pxa: remove IRQF_DISABLED 2013-12-11 17:32:41 -08:00
am300epd.c ARM: pxa: fix compilation problem on AM300EPD board 2014-02-10 10:32:08 -08:00
balloon3.c arch/arm/mach-pxa: replace strict_strto call with kstrto 2014-08-08 15:57:27 -07:00
capc7117.c
clock-pxa2xx.c
clock-pxa3xx.c
clock.c
clock.h
cm-x2xx-pci.c
cm-x2xx-pci.h
cm-x2xx.c
cm-x255.c
cm-x270.c
cm-x300.c ARM: 8025/1: Get rid of meminfo 2014-06-01 01:17:12 +01:00
colibri-evalboard.c ARM: pxa: fix colibri build 2014-03-21 18:26:02 +01:00
colibri-pxa3xx.c
colibri-pxa270-income.c ARM: pxa: Initialize PWM backlight enable_gpio field 2013-10-16 09:05:57 +02:00
colibri-pxa270.c
colibri-pxa300.c
colibri-pxa320.c
corgi_pm.c
corgi.c ARM: pxa: fix typo 'CONFIG_SPI_PXA2XX_MASTER' 2014-07-11 08:50:53 +08:00
csb701.c
csb726.c
devices.c ARM: pxa3xx: provide specific platform_devices for all ssp ports 2014-09-19 01:58:43 +08:00
devices.h ARM: pxa3xx: provide specific platform_devices for all ssp ports 2014-09-19 01:58:43 +08:00
em-x270.c ARM: pxa: remove IRQF_DISABLED 2013-12-11 17:32:41 -08:00
eseries.c ARM: 8025/1: Get rid of meminfo 2014-06-01 01:17:12 +01:00
ezx.c ARM: pxa: Initialize PWM backlight enable_gpio field 2013-10-16 09:05:57 +02:00
generic.c ARM: pxa: fix section mismatch warning for pxa_timer_nodt_init 2014-09-09 16:42:25 +02:00
generic.h reboot: arm: change reboot_mode to use enum reboot_mode 2013-07-09 10:33:29 -07:00
gumstix.c
h5000.c
himalaya.c
hx4700.c ARM: pxa: hx4700: use PWM_LOOKUP to initialize struct pwm_lookup 2014-05-21 11:19:44 +02:00
icontrol.c can: mcp251x: Replace power callbacks with regulator API 2013-08-21 09:28:29 +02:00
idp.c
irq.c ARM: pxa: Remove unused variables 2013-12-11 17:33:01 -08:00
Kconfig pwm: Changes for v3.15-rc1 2014-04-05 18:32:31 -07:00
littleton.c Input: pxa27x-keypad - use matrix_keymap for matrix keys 2013-06-18 22:56:51 -07:00
lpd270.c ARM: replace strnicmp with strncasecmp 2014-10-14 02:18:24 +02:00
lubbock.c
magician.c ARM: pxa: remove IRQF_DISABLED 2013-12-11 17:32:41 -08:00
mainstone.c ARM: pxa: remove IRQF_DISABLED 2013-12-11 17:32:41 -08:00
Makefile Revert "arm: pxa: Transition pxa27x to clk framework" 2014-10-03 16:30:53 -07:00
Makefile.boot
mfp-pxa2xx.c
mfp-pxa3xx.c
mioa701_bootresume.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
mioa701.c ARM: pxa: Add dummy backlight power supply on Mitac Mio A701 2014-02-11 11:33:09 +08:00
mp900.c
mxm8x10.c
palm27x.c ARM: pxa: Initialize PWM backlight enable_gpio field 2013-10-16 09:05:57 +02:00
palmld.c Input: pxa27x-keypad - use matrix_keymap for matrix keys 2013-06-18 22:56:51 -07:00
palmt5.c Input: pxa27x-keypad - use matrix_keymap for matrix keys 2013-06-18 22:56:51 -07:00
palmtc.c ARM: pxa: Initialize PWM backlight enable_gpio field 2013-10-16 09:05:57 +02:00
palmte2.c ARM: pxa: Initialize PWM backlight enable_gpio field 2013-10-16 09:05:57 +02:00
palmtreo.c Input: pxa27x-keypad - use matrix_keymap for matrix keys 2013-06-18 22:56:51 -07:00
palmtx.c Input: pxa27x-keypad - use matrix_keymap for matrix keys 2013-06-18 22:56:51 -07:00
palmz72.c Input: pxa27x-keypad - use matrix_keymap for matrix keys 2013-06-18 22:56:51 -07:00
pcm027.c
pcm990-baseboard.c ARM: pxa: remove IRQF_DISABLED 2013-12-11 17:32:41 -08:00
pm.c
poodle.c ARM: 8025/1: Get rid of meminfo 2014-06-01 01:17:12 +01:00
pxa2xx.c
pxa3xx-ulpi.c
pxa3xx.c ARM: pxa3xx: provide specific platform_devices for all ssp ports 2014-09-19 01:58:43 +08:00
pxa25x.c ARM: pxa: Move UNCACHED_PHYS_0 mapping from generic.c to pxa2[57]x.c 2014-07-12 09:51:40 -07:00
pxa27x.c Revert "arm: pxa: Transition pxa27x to clk framework" 2014-10-03 16:30:53 -07:00
pxa300.c
pxa320.c
pxa930.c ARM: pxa: move PXA_GPIO_TO_IRQ macro 2013-04-11 10:00:05 +08:00
pxa-dt.c ARM: pxa: fix DT auxdata for pxa3xx-gpio 2013-08-13 15:51:01 -07:00
raumfeld.c ARM: pxa: Initialize PWM backlight enable_gpio field 2013-10-16 09:05:57 +02:00
reset.c ARM: pxa: prevent PXA270 occasional reboot freezes 2013-12-11 16:35:16 -08:00
saar.c
sharpsl_pm.c ARM: pxa: remove IRQF_DISABLED 2013-12-11 17:32:41 -08:00
sleep.S ARM: pxa: correct errata number for PXA270 2014-07-04 20:30:42 +08:00
smemc.c
spitz_pm.c
spitz.c ARM: 8025/1: Get rid of meminfo 2014-06-01 01:17:12 +01:00
standby.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
stargate2.c misc: (at24) move header to linux/platform_data/ 2013-09-30 06:02:34 +02:00
tavorevb.c ARM: pxa: Initialize PWM backlight enable_gpio field 2013-10-16 09:05:57 +02:00
tosa-bt.c
tosa.c ARM: 8025/1: Get rid of meminfo 2014-06-01 01:17:12 +01:00
trizeps4.c ARM: pxa: remove IRQF_DISABLED 2013-12-11 17:32:41 -08:00
viper.c arch/arm/mach-pxa: replace strict_strto call with kstrto 2014-08-08 15:57:27 -07:00
vpac270.c
xcep.c
z2.c ARM: pxa: Initialize PWM backlight enable_gpio field 2013-10-16 09:05:57 +02:00
zeus.c ARM: pxa: zeus: Replace OHCI init/exit functions with a regulator 2014-04-24 13:05:32 -07:00
zylonite_pxa300.c gpio: (gpio-pca953x) move header to linux/platform_data/ 2013-08-29 12:33:52 -07:00
zylonite_pxa320.c
zylonite.c ARM: pxa: Initialize PWM backlight enable_gpio field 2013-10-16 09:05:57 +02:00