kernel-ark/drivers/pcmcia/cs.c
Dominik Brodowski 6f840afb41 pcmcia: replace struct irq with uint pcmcia_irq in struct pcmcia_socket
As we don't need the "Config" counter any more, we can simplify
struct pcmcia_socket.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-10 10:23:12 +02:00

949 lines
22 KiB
C

/*
* cs.c -- Kernel Card Services - core services
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* The initial developer of the original code is David A. Hinds
* <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
* are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
*
* (C) 1999 David A. Hinds
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/major.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/timer.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/device.h>
#include <linux/kthread.h>
#include <linux/freezer.h>
#include <asm/system.h>
#include <asm/irq.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/ss.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ds.h>
#include "cs_internal.h"
/* Module parameters */
MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
MODULE_DESCRIPTION("Linux Kernel Card Services");
MODULE_LICENSE("GPL");
#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0444)
INT_MODULE_PARM(setup_delay, 10); /* centiseconds */
INT_MODULE_PARM(resume_delay, 20); /* centiseconds */
INT_MODULE_PARM(shutdown_delay, 3); /* centiseconds */
INT_MODULE_PARM(vcc_settle, 40); /* centiseconds */
INT_MODULE_PARM(reset_time, 10); /* usecs */
INT_MODULE_PARM(unreset_delay, 10); /* centiseconds */
INT_MODULE_PARM(unreset_check, 10); /* centiseconds */
INT_MODULE_PARM(unreset_limit, 30); /* unreset_check's */
/* Access speed for attribute memory windows */
INT_MODULE_PARM(cis_speed, 300); /* ns */
socket_state_t dead_socket = {
.csc_mask = SS_DETECT,
};
EXPORT_SYMBOL(dead_socket);
/* List of all sockets, protected by a rwsem */
LIST_HEAD(pcmcia_socket_list);
EXPORT_SYMBOL(pcmcia_socket_list);
DECLARE_RWSEM(pcmcia_socket_list_rwsem);
EXPORT_SYMBOL(pcmcia_socket_list_rwsem);
struct pcmcia_socket *pcmcia_get_socket(struct pcmcia_socket *skt)
{
struct device *dev = get_device(&skt->dev);
if (!dev)
return NULL;
return dev_get_drvdata(dev);
}
EXPORT_SYMBOL(pcmcia_get_socket);
void pcmcia_put_socket(struct pcmcia_socket *skt)
{
put_device(&skt->dev);
}
EXPORT_SYMBOL(pcmcia_put_socket);
static void pcmcia_release_socket(struct device *dev)
{
struct pcmcia_socket *socket = dev_get_drvdata(dev);
complete(&socket->socket_released);
}
static int pccardd(void *__skt);
/**
* pcmcia_register_socket - add a new pcmcia socket device
* @socket: the &socket to register
*/
int pcmcia_register_socket(struct pcmcia_socket *socket)
{
struct task_struct *tsk;
int ret;
if (!socket || !socket->ops || !socket->dev.parent || !socket->resource_ops)
return -EINVAL;
dev_dbg(&socket->dev, "pcmcia_register_socket(0x%p)\n", socket->ops);
/* try to obtain a socket number [yes, it gets ugly if we
* register more than 2^sizeof(unsigned int) pcmcia
* sockets... but the socket number is deprecated
* anyways, so I don't care] */
down_write(&pcmcia_socket_list_rwsem);
if (list_empty(&pcmcia_socket_list))
socket->sock = 0;
else {
unsigned int found, i = 1;
struct pcmcia_socket *tmp;
do {
found = 1;
list_for_each_entry(tmp, &pcmcia_socket_list, socket_list) {
if (tmp->sock == i)
found = 0;
}
i++;
} while (!found);
socket->sock = i - 1;
}
list_add_tail(&socket->socket_list, &pcmcia_socket_list);
up_write(&pcmcia_socket_list_rwsem);
#ifndef CONFIG_CARDBUS
/*
* If we do not support Cardbus, ensure that
* the Cardbus socket capability is disabled.
*/
socket->features &= ~SS_CAP_CARDBUS;
#endif
/* set proper values in socket->dev */
dev_set_drvdata(&socket->dev, socket);
socket->dev.class = &pcmcia_socket_class;
dev_set_name(&socket->dev, "pcmcia_socket%u", socket->sock);
/* base address = 0, map = 0 */
socket->cis_mem.flags = 0;
socket->cis_mem.speed = cis_speed;
INIT_LIST_HEAD(&socket->cis_cache);
init_completion(&socket->socket_released);
init_completion(&socket->thread_done);
mutex_init(&socket->skt_mutex);
mutex_init(&socket->ops_mutex);
spin_lock_init(&socket->thread_lock);
if (socket->resource_ops->init) {
mutex_lock(&socket->ops_mutex);
ret = socket->resource_ops->init(socket);
mutex_unlock(&socket->ops_mutex);
if (ret)
goto err;
}
tsk = kthread_run(pccardd, socket, "pccardd");
if (IS_ERR(tsk)) {
ret = PTR_ERR(tsk);
goto err;
}
wait_for_completion(&socket->thread_done);
if (!socket->thread) {
dev_printk(KERN_WARNING, &socket->dev,
"PCMCIA: warning: socket thread did not start\n");
return -EIO;
}
pcmcia_parse_events(socket, SS_DETECT);
/*
* Let's try to get the PCMCIA module for 16-bit PCMCIA support.
* If it fails, it doesn't matter -- we still have 32-bit CardBus
* support to offer, so this is not a failure mode.
*/
request_module_nowait("pcmcia");
return 0;
err:
down_write(&pcmcia_socket_list_rwsem);
list_del(&socket->socket_list);
up_write(&pcmcia_socket_list_rwsem);
return ret;
} /* pcmcia_register_socket */
EXPORT_SYMBOL(pcmcia_register_socket);
/**
* pcmcia_unregister_socket - remove a pcmcia socket device
* @socket: the &socket to unregister
*/
void pcmcia_unregister_socket(struct pcmcia_socket *socket)
{
if (!socket)
return;
dev_dbg(&socket->dev, "pcmcia_unregister_socket(0x%p)\n", socket->ops);
if (socket->thread)
kthread_stop(socket->thread);
/* remove from our own list */
down_write(&pcmcia_socket_list_rwsem);
list_del(&socket->socket_list);
up_write(&pcmcia_socket_list_rwsem);
/* wait for sysfs to drop all references */
if (socket->resource_ops->exit) {
mutex_lock(&socket->ops_mutex);
socket->resource_ops->exit(socket);
mutex_unlock(&socket->ops_mutex);
}
wait_for_completion(&socket->socket_released);
} /* pcmcia_unregister_socket */
EXPORT_SYMBOL(pcmcia_unregister_socket);
struct pcmcia_socket *pcmcia_get_socket_by_nr(unsigned int nr)
{
struct pcmcia_socket *s;
down_read(&pcmcia_socket_list_rwsem);
list_for_each_entry(s, &pcmcia_socket_list, socket_list)
if (s->sock == nr) {
up_read(&pcmcia_socket_list_rwsem);
return s;
}
up_read(&pcmcia_socket_list_rwsem);
return NULL;
}
EXPORT_SYMBOL(pcmcia_get_socket_by_nr);
/*
* The central event handler. Send_event() sends an event to the
* 16-bit subsystem, which then calls the relevant device drivers.
* Parse_events() interprets the event bits from
* a card status change report. Do_shutdown() handles the high
* priority stuff associated with a card removal.
*/
/* NOTE: send_event needs to be called with skt->sem held. */
static int send_event(struct pcmcia_socket *s, event_t event, int priority)
{
int ret;
if ((s->state & SOCKET_CARDBUS) && (event != CS_EVENT_CARD_REMOVAL))
return 0;
dev_dbg(&s->dev, "send_event(event %d, pri %d, callback 0x%p)\n",
event, priority, s->callback);
if (!s->callback)
return 0;
if (!try_module_get(s->callback->owner))
return 0;
ret = s->callback->event(s, event, priority);
module_put(s->callback->owner);
return ret;
}
static int socket_reset(struct pcmcia_socket *skt)
{
int status, i;
dev_dbg(&skt->dev, "reset\n");
skt->socket.flags |= SS_OUTPUT_ENA | SS_RESET;
skt->ops->set_socket(skt, &skt->socket);
udelay((long)reset_time);
skt->socket.flags &= ~SS_RESET;
skt->ops->set_socket(skt, &skt->socket);
msleep(unreset_delay * 10);
for (i = 0; i < unreset_limit; i++) {
skt->ops->get_status(skt, &status);
if (!(status & SS_DETECT))
return -ENODEV;
if (status & SS_READY)
return 0;
msleep(unreset_check * 10);
}
dev_printk(KERN_ERR, &skt->dev, "time out after reset.\n");
return -ETIMEDOUT;
}
/*
* socket_setup() and socket_shutdown() are called by the main event handler
* when card insertion and removal events are received.
* socket_setup() turns on socket power and resets the socket, in two stages.
* socket_shutdown() unconfigures a socket and turns off socket power.
*/
static void socket_shutdown(struct pcmcia_socket *s)
{
int status;
dev_dbg(&s->dev, "shutdown\n");
send_event(s, CS_EVENT_CARD_REMOVAL, CS_EVENT_PRI_HIGH);
mutex_lock(&s->ops_mutex);
s->state &= SOCKET_INUSE | SOCKET_PRESENT;
msleep(shutdown_delay * 10);
s->state &= SOCKET_INUSE;
/* Blank out the socket state */
s->socket = dead_socket;
s->ops->init(s);
s->ops->set_socket(s, &s->socket);
s->lock_count = 0;
kfree(s->fake_cis);
s->fake_cis = NULL;
s->functions = 0;
/* From here on we can be sure that only we (that is, the
* pccardd thread) accesses this socket, and all (16-bit)
* PCMCIA interactions are gone. Therefore, release
* ops_mutex so that we don't get a sysfs-related lockdep
* warning.
*/
mutex_unlock(&s->ops_mutex);
#ifdef CONFIG_CARDBUS
cb_free(s);
#endif
/* give socket some time to power down */
msleep(100);
s->ops->get_status(s, &status);
if (status & SS_POWERON) {
dev_printk(KERN_ERR, &s->dev,
"*** DANGER *** unable to remove socket power\n");
}
s->state &= ~SOCKET_INUSE;
}
static int socket_setup(struct pcmcia_socket *skt, int initial_delay)
{
int status, i;
dev_dbg(&skt->dev, "setup\n");
skt->ops->get_status(skt, &status);
if (!(status & SS_DETECT))
return -ENODEV;
msleep(initial_delay * 10);
for (i = 0; i < 100; i++) {
skt->ops->get_status(skt, &status);
if (!(status & SS_DETECT))
return -ENODEV;
if (!(status & SS_PENDING))
break;
msleep(100);
}
if (status & SS_PENDING) {
dev_printk(KERN_ERR, &skt->dev,
"voltage interrogation timed out.\n");
return -ETIMEDOUT;
}
if (status & SS_CARDBUS) {
if (!(skt->features & SS_CAP_CARDBUS)) {
dev_printk(KERN_ERR, &skt->dev,
"cardbus cards are not supported.\n");
return -EINVAL;
}
skt->state |= SOCKET_CARDBUS;
} else
skt->state &= ~SOCKET_CARDBUS;
/*
* Decode the card voltage requirements, and apply power to the card.
*/
if (status & SS_3VCARD)
skt->socket.Vcc = skt->socket.Vpp = 33;
else if (!(status & SS_XVCARD))
skt->socket.Vcc = skt->socket.Vpp = 50;
else {
dev_printk(KERN_ERR, &skt->dev, "unsupported voltage key.\n");
return -EIO;
}
if (skt->power_hook)
skt->power_hook(skt, HOOK_POWER_PRE);
skt->socket.flags = 0;
skt->ops->set_socket(skt, &skt->socket);
/*
* Wait "vcc_settle" for the supply to stabilise.
*/
msleep(vcc_settle * 10);
skt->ops->get_status(skt, &status);
if (!(status & SS_POWERON)) {
dev_printk(KERN_ERR, &skt->dev, "unable to apply power.\n");
return -EIO;
}
status = socket_reset(skt);
if (skt->power_hook)
skt->power_hook(skt, HOOK_POWER_POST);
return status;
}
/*
* Handle card insertion. Setup the socket, reset the card,
* and then tell the rest of PCMCIA that a card is present.
*/
static int socket_insert(struct pcmcia_socket *skt)
{
int ret;
dev_dbg(&skt->dev, "insert\n");
mutex_lock(&skt->ops_mutex);
if (skt->state & SOCKET_INUSE) {
mutex_unlock(&skt->ops_mutex);
return -EINVAL;
}
skt->state |= SOCKET_INUSE;
ret = socket_setup(skt, setup_delay);
if (ret == 0) {
skt->state |= SOCKET_PRESENT;
dev_printk(KERN_NOTICE, &skt->dev,
"pccard: %s card inserted into slot %d\n",
(skt->state & SOCKET_CARDBUS) ? "CardBus" : "PCMCIA",
skt->sock);
#ifdef CONFIG_CARDBUS
if (skt->state & SOCKET_CARDBUS) {
cb_alloc(skt);
skt->state |= SOCKET_CARDBUS_CONFIG;
}
#endif
dev_dbg(&skt->dev, "insert done\n");
mutex_unlock(&skt->ops_mutex);
send_event(skt, CS_EVENT_CARD_INSERTION, CS_EVENT_PRI_LOW);
} else {
mutex_unlock(&skt->ops_mutex);
socket_shutdown(skt);
}
return ret;
}
static int socket_suspend(struct pcmcia_socket *skt)
{
if (skt->state & SOCKET_SUSPEND)
return -EBUSY;
mutex_lock(&skt->ops_mutex);
skt->suspended_state = skt->state;
send_event(skt, CS_EVENT_PM_SUSPEND, CS_EVENT_PRI_LOW);
skt->socket = dead_socket;
skt->ops->set_socket(skt, &skt->socket);
if (skt->ops->suspend)
skt->ops->suspend(skt);
skt->state |= SOCKET_SUSPEND;
mutex_unlock(&skt->ops_mutex);
return 0;
}
static int socket_early_resume(struct pcmcia_socket *skt)
{
mutex_lock(&skt->ops_mutex);
skt->socket = dead_socket;
skt->ops->init(skt);
skt->ops->set_socket(skt, &skt->socket);
if (skt->state & SOCKET_PRESENT)
skt->resume_status = socket_setup(skt, resume_delay);
mutex_unlock(&skt->ops_mutex);
return 0;
}
static int socket_late_resume(struct pcmcia_socket *skt)
{
int ret;
mutex_lock(&skt->ops_mutex);
skt->state &= ~SOCKET_SUSPEND;
mutex_unlock(&skt->ops_mutex);
if (!(skt->state & SOCKET_PRESENT)) {
ret = socket_insert(skt);
if (ret == -ENODEV)
ret = 0;
return ret;
}
if (skt->resume_status) {
socket_shutdown(skt);
return 0;
}
if (skt->suspended_state != skt->state) {
dev_dbg(&skt->dev,
"suspend state 0x%x != resume state 0x%x\n",
skt->suspended_state, skt->state);
socket_shutdown(skt);
return socket_insert(skt);
}
#ifdef CONFIG_CARDBUS
if (skt->state & SOCKET_CARDBUS) {
/* We can't be sure the CardBus card is the same
* as the one previously inserted. Therefore, remove
* and re-add... */
cb_free(skt);
cb_alloc(skt);
return 0;
}
#endif
send_event(skt, CS_EVENT_PM_RESUME, CS_EVENT_PRI_LOW);
return 0;
}
/*
* Resume a socket. If a card is present, verify its CIS against
* our cached copy. If they are different, the card has been
* replaced, and we need to tell the drivers.
*/
static int socket_resume(struct pcmcia_socket *skt)
{
if (!(skt->state & SOCKET_SUSPEND))
return -EBUSY;
socket_early_resume(skt);
return socket_late_resume(skt);
}
static void socket_remove(struct pcmcia_socket *skt)
{
dev_printk(KERN_NOTICE, &skt->dev,
"pccard: card ejected from slot %d\n", skt->sock);
socket_shutdown(skt);
}
/*
* Process a socket card detect status change.
*
* If we don't have a card already present, delay the detect event for
* about 20ms (to be on the safe side) before reading the socket status.
*
* Some i82365-based systems send multiple SS_DETECT events during card
* insertion, and the "card present" status bit seems to bounce. This
* will probably be true with GPIO-based card detection systems after
* the product has aged.
*/
static void socket_detect_change(struct pcmcia_socket *skt)
{
if (!(skt->state & SOCKET_SUSPEND)) {
int status;
if (!(skt->state & SOCKET_PRESENT))
msleep(20);
skt->ops->get_status(skt, &status);
if ((skt->state & SOCKET_PRESENT) &&
!(status & SS_DETECT))
socket_remove(skt);
if (!(skt->state & SOCKET_PRESENT) &&
(status & SS_DETECT))
socket_insert(skt);
}
}
static int pccardd(void *__skt)
{
struct pcmcia_socket *skt = __skt;
int ret;
skt->thread = current;
skt->socket = dead_socket;
skt->ops->init(skt);
skt->ops->set_socket(skt, &skt->socket);
/* register with the device core */
ret = device_register(&skt->dev);
if (ret) {
dev_printk(KERN_WARNING, &skt->dev,
"PCMCIA: unable to register socket\n");
skt->thread = NULL;
complete(&skt->thread_done);
return 0;
}
ret = pccard_sysfs_add_socket(&skt->dev);
if (ret)
dev_warn(&skt->dev, "err %d adding socket attributes\n", ret);
complete(&skt->thread_done);
/* wait for userspace to catch up */
msleep(250);
set_freezable();
for (;;) {
unsigned long flags;
unsigned int events;
unsigned int sysfs_events;
set_current_state(TASK_INTERRUPTIBLE);
spin_lock_irqsave(&skt->thread_lock, flags);
events = skt->thread_events;
skt->thread_events = 0;
sysfs_events = skt->sysfs_events;
skt->sysfs_events = 0;
spin_unlock_irqrestore(&skt->thread_lock, flags);
mutex_lock(&skt->skt_mutex);
if (events) {
if (events & SS_DETECT)
socket_detect_change(skt);
if (events & SS_BATDEAD)
send_event(skt, CS_EVENT_BATTERY_DEAD, CS_EVENT_PRI_LOW);
if (events & SS_BATWARN)
send_event(skt, CS_EVENT_BATTERY_LOW, CS_EVENT_PRI_LOW);
if (events & SS_READY)
send_event(skt, CS_EVENT_READY_CHANGE, CS_EVENT_PRI_LOW);
}
if (sysfs_events) {
if (sysfs_events & PCMCIA_UEVENT_EJECT)
socket_remove(skt);
if (sysfs_events & PCMCIA_UEVENT_INSERT)
socket_insert(skt);
if ((sysfs_events & PCMCIA_UEVENT_SUSPEND) &&
!(skt->state & SOCKET_CARDBUS)) {
if (skt->callback)
ret = skt->callback->suspend(skt);
else
ret = 0;
if (!ret) {
socket_suspend(skt);
msleep(100);
}
}
if ((sysfs_events & PCMCIA_UEVENT_RESUME) &&
!(skt->state & SOCKET_CARDBUS)) {
ret = socket_resume(skt);
if (!ret && skt->callback)
skt->callback->resume(skt);
}
if ((sysfs_events & PCMCIA_UEVENT_REQUERY) &&
!(skt->state & SOCKET_CARDBUS)) {
if (!ret && skt->callback)
skt->callback->requery(skt);
}
}
mutex_unlock(&skt->skt_mutex);
if (events || sysfs_events)
continue;
if (kthread_should_stop())
break;
schedule();
try_to_freeze();
}
/* make sure we are running before we exit */
set_current_state(TASK_RUNNING);
/* shut down socket, if a device is still present */
if (skt->state & SOCKET_PRESENT) {
mutex_lock(&skt->skt_mutex);
socket_remove(skt);
mutex_unlock(&skt->skt_mutex);
}
/* remove from the device core */
pccard_sysfs_remove_socket(&skt->dev);
device_unregister(&skt->dev);
return 0;
}
/*
* Yenta (at least) probes interrupts before registering the socket and
* starting the handler thread.
*/
void pcmcia_parse_events(struct pcmcia_socket *s, u_int events)
{
unsigned long flags;
dev_dbg(&s->dev, "parse_events: events %08x\n", events);
if (s->thread) {
spin_lock_irqsave(&s->thread_lock, flags);
s->thread_events |= events;
spin_unlock_irqrestore(&s->thread_lock, flags);
wake_up_process(s->thread);
}
} /* pcmcia_parse_events */
EXPORT_SYMBOL(pcmcia_parse_events);
/**
* pcmcia_parse_uevents() - tell pccardd to issue manual commands
* @s: the PCMCIA socket we wan't to command
* @events: events to pass to pccardd
*
* userspace-issued insert, eject, suspend and resume commands must be
* handled by pccardd to avoid any sysfs-related deadlocks. Valid events
* are PCMCIA_UEVENT_EJECT (for eject), PCMCIA_UEVENT__INSERT (for insert),
* PCMCIA_UEVENT_RESUME (for resume), PCMCIA_UEVENT_SUSPEND (for suspend)
* and PCMCIA_UEVENT_REQUERY (for re-querying the PCMCIA card).
*/
void pcmcia_parse_uevents(struct pcmcia_socket *s, u_int events)
{
unsigned long flags;
dev_dbg(&s->dev, "parse_uevents: events %08x\n", events);
if (s->thread) {
spin_lock_irqsave(&s->thread_lock, flags);
s->sysfs_events |= events;
spin_unlock_irqrestore(&s->thread_lock, flags);
wake_up_process(s->thread);
}
}
EXPORT_SYMBOL(pcmcia_parse_uevents);
/* register pcmcia_callback */
int pccard_register_pcmcia(struct pcmcia_socket *s, struct pcmcia_callback *c)
{
int ret = 0;
/* s->skt_mutex also protects s->callback */
mutex_lock(&s->skt_mutex);
if (c) {
/* registration */
if (s->callback) {
ret = -EBUSY;
goto err;
}
s->callback = c;
if ((s->state & (SOCKET_PRESENT|SOCKET_CARDBUS)) == SOCKET_PRESENT)
send_event(s, CS_EVENT_CARD_INSERTION, CS_EVENT_PRI_LOW);
} else
s->callback = NULL;
err:
mutex_unlock(&s->skt_mutex);
return ret;
}
EXPORT_SYMBOL(pccard_register_pcmcia);
/* I'm not sure which "reset" function this is supposed to use,
* but for now, it uses the low-level interface's reset, not the
* CIS register.
*/
int pcmcia_reset_card(struct pcmcia_socket *skt)
{
int ret;
dev_dbg(&skt->dev, "resetting socket\n");
mutex_lock(&skt->skt_mutex);
do {
if (!(skt->state & SOCKET_PRESENT)) {
dev_dbg(&skt->dev, "can't reset, not present\n");
ret = -ENODEV;
break;
}
if (skt->state & SOCKET_SUSPEND) {
dev_dbg(&skt->dev, "can't reset, suspended\n");
ret = -EBUSY;
break;
}
if (skt->state & SOCKET_CARDBUS) {
dev_dbg(&skt->dev, "can't reset, is cardbus\n");
ret = -EPERM;
break;
}
ret = send_event(skt, CS_EVENT_RESET_REQUEST, CS_EVENT_PRI_LOW);
if (ret == 0) {
send_event(skt, CS_EVENT_RESET_PHYSICAL, CS_EVENT_PRI_LOW);
if (skt->callback)
skt->callback->suspend(skt);
mutex_lock(&skt->ops_mutex);
ret = socket_reset(skt);
mutex_unlock(&skt->ops_mutex);
if (ret == 0) {
send_event(skt, CS_EVENT_CARD_RESET, CS_EVENT_PRI_LOW);
if (skt->callback)
skt->callback->resume(skt);
}
}
ret = 0;
} while (0);
mutex_unlock(&skt->skt_mutex);
return ret;
} /* reset_card */
EXPORT_SYMBOL(pcmcia_reset_card);
static int pcmcia_socket_uevent(struct device *dev,
struct kobj_uevent_env *env)
{
struct pcmcia_socket *s = container_of(dev, struct pcmcia_socket, dev);
if (add_uevent_var(env, "SOCKET_NO=%u", s->sock))
return -ENOMEM;
return 0;
}
static struct completion pcmcia_unload;
static void pcmcia_release_socket_class(struct class *data)
{
complete(&pcmcia_unload);
}
#ifdef CONFIG_PM
static int __pcmcia_pm_op(struct device *dev,
int (*callback) (struct pcmcia_socket *skt))
{
struct pcmcia_socket *s = container_of(dev, struct pcmcia_socket, dev);
int ret;
mutex_lock(&s->skt_mutex);
ret = callback(s);
mutex_unlock(&s->skt_mutex);
return ret;
}
static int pcmcia_socket_dev_suspend_noirq(struct device *dev)
{
return __pcmcia_pm_op(dev, socket_suspend);
}
static int pcmcia_socket_dev_resume_noirq(struct device *dev)
{
return __pcmcia_pm_op(dev, socket_early_resume);
}
static int pcmcia_socket_dev_resume(struct device *dev)
{
return __pcmcia_pm_op(dev, socket_late_resume);
}
static const struct dev_pm_ops pcmcia_socket_pm_ops = {
/* dev_resume may be called with IRQs enabled */
SET_SYSTEM_SLEEP_PM_OPS(NULL,
pcmcia_socket_dev_resume)
/* late suspend must be called with IRQs disabled */
.suspend_noirq = pcmcia_socket_dev_suspend_noirq,
.freeze_noirq = pcmcia_socket_dev_suspend_noirq,
.poweroff_noirq = pcmcia_socket_dev_suspend_noirq,
/* early resume must be called with IRQs disabled */
.resume_noirq = pcmcia_socket_dev_resume_noirq,
.thaw_noirq = pcmcia_socket_dev_resume_noirq,
.restore_noirq = pcmcia_socket_dev_resume_noirq,
};
#define PCMCIA_SOCKET_CLASS_PM_OPS (&pcmcia_socket_pm_ops)
#else /* CONFIG_PM */
#define PCMCIA_SOCKET_CLASS_PM_OPS NULL
#endif /* CONFIG_PM */
struct class pcmcia_socket_class = {
.name = "pcmcia_socket",
.dev_uevent = pcmcia_socket_uevent,
.dev_release = pcmcia_release_socket,
.class_release = pcmcia_release_socket_class,
.pm = PCMCIA_SOCKET_CLASS_PM_OPS,
};
EXPORT_SYMBOL(pcmcia_socket_class);
static int __init init_pcmcia_cs(void)
{
init_completion(&pcmcia_unload);
return class_register(&pcmcia_socket_class);
}
static void __exit exit_pcmcia_cs(void)
{
class_unregister(&pcmcia_socket_class);
wait_for_completion(&pcmcia_unload);
}
subsys_initcall(init_pcmcia_cs);
module_exit(exit_pcmcia_cs);