kernel-ark/drivers/md/multipath.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

593 lines
15 KiB
C

/*
* multipath.c : Multiple Devices driver for Linux
*
* Copyright (C) 1999, 2000, 2001 Ingo Molnar, Red Hat
*
* Copyright (C) 1996, 1997, 1998 Ingo Molnar, Miguel de Icaza, Gadi Oxman
*
* MULTIPATH management functions.
*
* derived from raid1.c.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* You should have received a copy of the GNU General Public License
* (for example /usr/src/linux/COPYING); if not, write to the Free
* Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/blkdev.h>
#include <linux/raid/md_u.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
#include "md.h"
#include "multipath.h"
#define MAX_WORK_PER_DISK 128
#define NR_RESERVED_BUFS 32
static int multipath_map (multipath_conf_t *conf)
{
int i, disks = conf->raid_disks;
/*
* Later we do read balancing on the read side
* now we use the first available disk.
*/
rcu_read_lock();
for (i = 0; i < disks; i++) {
mdk_rdev_t *rdev = rcu_dereference(conf->multipaths[i].rdev);
if (rdev && test_bit(In_sync, &rdev->flags)) {
atomic_inc(&rdev->nr_pending);
rcu_read_unlock();
return i;
}
}
rcu_read_unlock();
printk(KERN_ERR "multipath_map(): no more operational IO paths?\n");
return (-1);
}
static void multipath_reschedule_retry (struct multipath_bh *mp_bh)
{
unsigned long flags;
mddev_t *mddev = mp_bh->mddev;
multipath_conf_t *conf = mddev->private;
spin_lock_irqsave(&conf->device_lock, flags);
list_add(&mp_bh->retry_list, &conf->retry_list);
spin_unlock_irqrestore(&conf->device_lock, flags);
md_wakeup_thread(mddev->thread);
}
/*
* multipath_end_bh_io() is called when we have finished servicing a multipathed
* operation and are ready to return a success/failure code to the buffer
* cache layer.
*/
static void multipath_end_bh_io (struct multipath_bh *mp_bh, int err)
{
struct bio *bio = mp_bh->master_bio;
multipath_conf_t *conf = mp_bh->mddev->private;
bio_endio(bio, err);
mempool_free(mp_bh, conf->pool);
}
static void multipath_end_request(struct bio *bio, int error)
{
int uptodate = test_bit(BIO_UPTODATE, &bio->bi_flags);
struct multipath_bh * mp_bh = (struct multipath_bh *)(bio->bi_private);
multipath_conf_t *conf = mp_bh->mddev->private;
mdk_rdev_t *rdev = conf->multipaths[mp_bh->path].rdev;
if (uptodate)
multipath_end_bh_io(mp_bh, 0);
else if (!bio_rw_flagged(bio, BIO_RW_AHEAD)) {
/*
* oops, IO error:
*/
char b[BDEVNAME_SIZE];
md_error (mp_bh->mddev, rdev);
printk(KERN_ERR "multipath: %s: rescheduling sector %llu\n",
bdevname(rdev->bdev,b),
(unsigned long long)bio->bi_sector);
multipath_reschedule_retry(mp_bh);
} else
multipath_end_bh_io(mp_bh, error);
rdev_dec_pending(rdev, conf->mddev);
}
static void unplug_slaves(mddev_t *mddev)
{
multipath_conf_t *conf = mddev->private;
int i;
rcu_read_lock();
for (i=0; i<mddev->raid_disks; i++) {
mdk_rdev_t *rdev = rcu_dereference(conf->multipaths[i].rdev);
if (rdev && !test_bit(Faulty, &rdev->flags)
&& atomic_read(&rdev->nr_pending)) {
struct request_queue *r_queue = bdev_get_queue(rdev->bdev);
atomic_inc(&rdev->nr_pending);
rcu_read_unlock();
blk_unplug(r_queue);
rdev_dec_pending(rdev, mddev);
rcu_read_lock();
}
}
rcu_read_unlock();
}
static void multipath_unplug(struct request_queue *q)
{
unplug_slaves(q->queuedata);
}
static int multipath_make_request (struct request_queue *q, struct bio * bio)
{
mddev_t *mddev = q->queuedata;
multipath_conf_t *conf = mddev->private;
struct multipath_bh * mp_bh;
struct multipath_info *multipath;
const int rw = bio_data_dir(bio);
int cpu;
if (unlikely(bio_rw_flagged(bio, BIO_RW_BARRIER))) {
md_barrier_request(mddev, bio);
return 0;
}
mp_bh = mempool_alloc(conf->pool, GFP_NOIO);
mp_bh->master_bio = bio;
mp_bh->mddev = mddev;
cpu = part_stat_lock();
part_stat_inc(cpu, &mddev->gendisk->part0, ios[rw]);
part_stat_add(cpu, &mddev->gendisk->part0, sectors[rw],
bio_sectors(bio));
part_stat_unlock();
mp_bh->path = multipath_map(conf);
if (mp_bh->path < 0) {
bio_endio(bio, -EIO);
mempool_free(mp_bh, conf->pool);
return 0;
}
multipath = conf->multipaths + mp_bh->path;
mp_bh->bio = *bio;
mp_bh->bio.bi_sector += multipath->rdev->data_offset;
mp_bh->bio.bi_bdev = multipath->rdev->bdev;
mp_bh->bio.bi_rw |= (1 << BIO_RW_FAILFAST_TRANSPORT);
mp_bh->bio.bi_end_io = multipath_end_request;
mp_bh->bio.bi_private = mp_bh;
generic_make_request(&mp_bh->bio);
return 0;
}
static void multipath_status (struct seq_file *seq, mddev_t *mddev)
{
multipath_conf_t *conf = mddev->private;
int i;
seq_printf (seq, " [%d/%d] [", conf->raid_disks,
conf->working_disks);
for (i = 0; i < conf->raid_disks; i++)
seq_printf (seq, "%s",
conf->multipaths[i].rdev &&
test_bit(In_sync, &conf->multipaths[i].rdev->flags) ? "U" : "_");
seq_printf (seq, "]");
}
static int multipath_congested(void *data, int bits)
{
mddev_t *mddev = data;
multipath_conf_t *conf = mddev->private;
int i, ret = 0;
if (mddev_congested(mddev, bits))
return 1;
rcu_read_lock();
for (i = 0; i < mddev->raid_disks ; i++) {
mdk_rdev_t *rdev = rcu_dereference(conf->multipaths[i].rdev);
if (rdev && !test_bit(Faulty, &rdev->flags)) {
struct request_queue *q = bdev_get_queue(rdev->bdev);
ret |= bdi_congested(&q->backing_dev_info, bits);
/* Just like multipath_map, we just check the
* first available device
*/
break;
}
}
rcu_read_unlock();
return ret;
}
/*
* Careful, this can execute in IRQ contexts as well!
*/
static void multipath_error (mddev_t *mddev, mdk_rdev_t *rdev)
{
multipath_conf_t *conf = mddev->private;
if (conf->working_disks <= 1) {
/*
* Uh oh, we can do nothing if this is our last path, but
* first check if this is a queued request for a device
* which has just failed.
*/
printk(KERN_ALERT
"multipath: only one IO path left and IO error.\n");
/* leave it active... it's all we have */
} else {
/*
* Mark disk as unusable
*/
if (!test_bit(Faulty, &rdev->flags)) {
char b[BDEVNAME_SIZE];
clear_bit(In_sync, &rdev->flags);
set_bit(Faulty, &rdev->flags);
set_bit(MD_CHANGE_DEVS, &mddev->flags);
conf->working_disks--;
mddev->degraded++;
printk(KERN_ALERT "multipath: IO failure on %s,"
" disabling IO path.\n"
"multipath: Operation continuing"
" on %d IO paths.\n",
bdevname (rdev->bdev,b),
conf->working_disks);
}
}
}
static void print_multipath_conf (multipath_conf_t *conf)
{
int i;
struct multipath_info *tmp;
printk("MULTIPATH conf printout:\n");
if (!conf) {
printk("(conf==NULL)\n");
return;
}
printk(" --- wd:%d rd:%d\n", conf->working_disks,
conf->raid_disks);
for (i = 0; i < conf->raid_disks; i++) {
char b[BDEVNAME_SIZE];
tmp = conf->multipaths + i;
if (tmp->rdev)
printk(" disk%d, o:%d, dev:%s\n",
i,!test_bit(Faulty, &tmp->rdev->flags),
bdevname(tmp->rdev->bdev,b));
}
}
static int multipath_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
{
multipath_conf_t *conf = mddev->private;
struct request_queue *q;
int err = -EEXIST;
int path;
struct multipath_info *p;
int first = 0;
int last = mddev->raid_disks - 1;
if (rdev->raid_disk >= 0)
first = last = rdev->raid_disk;
print_multipath_conf(conf);
for (path = first; path <= last; path++)
if ((p=conf->multipaths+path)->rdev == NULL) {
q = rdev->bdev->bd_disk->queue;
disk_stack_limits(mddev->gendisk, rdev->bdev,
rdev->data_offset << 9);
/* as we don't honour merge_bvec_fn, we must never risk
* violating it, so limit ->max_segments to one, lying
* within a single page.
* (Note: it is very unlikely that a device with
* merge_bvec_fn will be involved in multipath.)
*/
if (q->merge_bvec_fn) {
blk_queue_max_segments(mddev->queue, 1);
blk_queue_segment_boundary(mddev->queue,
PAGE_CACHE_SIZE - 1);
}
conf->working_disks++;
mddev->degraded--;
rdev->raid_disk = path;
set_bit(In_sync, &rdev->flags);
rcu_assign_pointer(p->rdev, rdev);
err = 0;
md_integrity_add_rdev(rdev, mddev);
break;
}
print_multipath_conf(conf);
return err;
}
static int multipath_remove_disk(mddev_t *mddev, int number)
{
multipath_conf_t *conf = mddev->private;
int err = 0;
mdk_rdev_t *rdev;
struct multipath_info *p = conf->multipaths + number;
print_multipath_conf(conf);
rdev = p->rdev;
if (rdev) {
if (test_bit(In_sync, &rdev->flags) ||
atomic_read(&rdev->nr_pending)) {
printk(KERN_ERR "hot-remove-disk, slot %d is identified"
" but is still operational!\n", number);
err = -EBUSY;
goto abort;
}
p->rdev = NULL;
synchronize_rcu();
if (atomic_read(&rdev->nr_pending)) {
/* lost the race, try later */
err = -EBUSY;
p->rdev = rdev;
goto abort;
}
md_integrity_register(mddev);
}
abort:
print_multipath_conf(conf);
return err;
}
/*
* This is a kernel thread which:
*
* 1. Retries failed read operations on working multipaths.
* 2. Updates the raid superblock when problems encounter.
* 3. Performs writes following reads for array syncronising.
*/
static void multipathd (mddev_t *mddev)
{
struct multipath_bh *mp_bh;
struct bio *bio;
unsigned long flags;
multipath_conf_t *conf = mddev->private;
struct list_head *head = &conf->retry_list;
md_check_recovery(mddev);
for (;;) {
char b[BDEVNAME_SIZE];
spin_lock_irqsave(&conf->device_lock, flags);
if (list_empty(head))
break;
mp_bh = list_entry(head->prev, struct multipath_bh, retry_list);
list_del(head->prev);
spin_unlock_irqrestore(&conf->device_lock, flags);
bio = &mp_bh->bio;
bio->bi_sector = mp_bh->master_bio->bi_sector;
if ((mp_bh->path = multipath_map (conf))<0) {
printk(KERN_ALERT "multipath: %s: unrecoverable IO read"
" error for block %llu\n",
bdevname(bio->bi_bdev,b),
(unsigned long long)bio->bi_sector);
multipath_end_bh_io(mp_bh, -EIO);
} else {
printk(KERN_ERR "multipath: %s: redirecting sector %llu"
" to another IO path\n",
bdevname(bio->bi_bdev,b),
(unsigned long long)bio->bi_sector);
*bio = *(mp_bh->master_bio);
bio->bi_sector += conf->multipaths[mp_bh->path].rdev->data_offset;
bio->bi_bdev = conf->multipaths[mp_bh->path].rdev->bdev;
bio->bi_rw |= (1 << BIO_RW_FAILFAST_TRANSPORT);
bio->bi_end_io = multipath_end_request;
bio->bi_private = mp_bh;
generic_make_request(bio);
}
}
spin_unlock_irqrestore(&conf->device_lock, flags);
}
static sector_t multipath_size(mddev_t *mddev, sector_t sectors, int raid_disks)
{
WARN_ONCE(sectors || raid_disks,
"%s does not support generic reshape\n", __func__);
return mddev->dev_sectors;
}
static int multipath_run (mddev_t *mddev)
{
multipath_conf_t *conf;
int disk_idx;
struct multipath_info *disk;
mdk_rdev_t *rdev;
if (md_check_no_bitmap(mddev))
return -EINVAL;
if (mddev->level != LEVEL_MULTIPATH) {
printk("multipath: %s: raid level not set to multipath IO (%d)\n",
mdname(mddev), mddev->level);
goto out;
}
/*
* copy the already verified devices into our private MULTIPATH
* bookkeeping area. [whatever we allocate in multipath_run(),
* should be freed in multipath_stop()]
*/
mddev->queue->queue_lock = &mddev->queue->__queue_lock;
conf = kzalloc(sizeof(multipath_conf_t), GFP_KERNEL);
mddev->private = conf;
if (!conf) {
printk(KERN_ERR
"multipath: couldn't allocate memory for %s\n",
mdname(mddev));
goto out;
}
conf->multipaths = kzalloc(sizeof(struct multipath_info)*mddev->raid_disks,
GFP_KERNEL);
if (!conf->multipaths) {
printk(KERN_ERR
"multipath: couldn't allocate memory for %s\n",
mdname(mddev));
goto out_free_conf;
}
conf->working_disks = 0;
list_for_each_entry(rdev, &mddev->disks, same_set) {
disk_idx = rdev->raid_disk;
if (disk_idx < 0 ||
disk_idx >= mddev->raid_disks)
continue;
disk = conf->multipaths + disk_idx;
disk->rdev = rdev;
disk_stack_limits(mddev->gendisk, rdev->bdev,
rdev->data_offset << 9);
/* as we don't honour merge_bvec_fn, we must never risk
* violating it, not that we ever expect a device with
* a merge_bvec_fn to be involved in multipath */
if (rdev->bdev->bd_disk->queue->merge_bvec_fn) {
blk_queue_max_segments(mddev->queue, 1);
blk_queue_segment_boundary(mddev->queue,
PAGE_CACHE_SIZE - 1);
}
if (!test_bit(Faulty, &rdev->flags))
conf->working_disks++;
}
conf->raid_disks = mddev->raid_disks;
conf->mddev = mddev;
spin_lock_init(&conf->device_lock);
INIT_LIST_HEAD(&conf->retry_list);
if (!conf->working_disks) {
printk(KERN_ERR "multipath: no operational IO paths for %s\n",
mdname(mddev));
goto out_free_conf;
}
mddev->degraded = conf->raid_disks - conf->working_disks;
conf->pool = mempool_create_kmalloc_pool(NR_RESERVED_BUFS,
sizeof(struct multipath_bh));
if (conf->pool == NULL) {
printk(KERN_ERR
"multipath: couldn't allocate memory for %s\n",
mdname(mddev));
goto out_free_conf;
}
{
mddev->thread = md_register_thread(multipathd, mddev, NULL);
if (!mddev->thread) {
printk(KERN_ERR "multipath: couldn't allocate thread"
" for %s\n", mdname(mddev));
goto out_free_conf;
}
}
printk(KERN_INFO
"multipath: array %s active with %d out of %d IO paths\n",
mdname(mddev), conf->working_disks, mddev->raid_disks);
/*
* Ok, everything is just fine now
*/
md_set_array_sectors(mddev, multipath_size(mddev, 0, 0));
mddev->queue->unplug_fn = multipath_unplug;
mddev->queue->backing_dev_info.congested_fn = multipath_congested;
mddev->queue->backing_dev_info.congested_data = mddev;
md_integrity_register(mddev);
return 0;
out_free_conf:
if (conf->pool)
mempool_destroy(conf->pool);
kfree(conf->multipaths);
kfree(conf);
mddev->private = NULL;
out:
return -EIO;
}
static int multipath_stop (mddev_t *mddev)
{
multipath_conf_t *conf = mddev->private;
md_unregister_thread(mddev->thread);
mddev->thread = NULL;
blk_sync_queue(mddev->queue); /* the unplug fn references 'conf'*/
mempool_destroy(conf->pool);
kfree(conf->multipaths);
kfree(conf);
mddev->private = NULL;
return 0;
}
static struct mdk_personality multipath_personality =
{
.name = "multipath",
.level = LEVEL_MULTIPATH,
.owner = THIS_MODULE,
.make_request = multipath_make_request,
.run = multipath_run,
.stop = multipath_stop,
.status = multipath_status,
.error_handler = multipath_error,
.hot_add_disk = multipath_add_disk,
.hot_remove_disk= multipath_remove_disk,
.size = multipath_size,
};
static int __init multipath_init (void)
{
return register_md_personality (&multipath_personality);
}
static void __exit multipath_exit (void)
{
unregister_md_personality (&multipath_personality);
}
module_init(multipath_init);
module_exit(multipath_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("simple multi-path personality for MD");
MODULE_ALIAS("md-personality-7"); /* MULTIPATH */
MODULE_ALIAS("md-multipath");
MODULE_ALIAS("md-level--4");