kernel-ark/kernel/power/disk.c
Rafael J. Wysocki 58b3b71dfa Fix ThinkPad T42 poweroff failure introduced by by "PM: Introduce pm_power_off_prepare"
Commit bd804eba1c ("PM: Introduce
pm_power_off_prepare") caused problems in the poweroff path, as reported by
YOSHIFUJI Hideaki / 吉藤英明.

Generally, sysdev_shutdown() should be called after the ACPI preparation for
powering the system off.  To make it happen, we can separate sysdev_shutdown()
from device_shutdown() and call it directly wherever necessary.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: YOSHIFUJI Hideaki / 吉藤英明 <yoshfuji@linux-ipv6.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26 12:13:06 -07:00

634 lines
14 KiB
C

/*
* kernel/power/disk.c - Suspend-to-disk support.
*
* Copyright (c) 2003 Patrick Mochel
* Copyright (c) 2003 Open Source Development Lab
* Copyright (c) 2004 Pavel Machek <pavel@suse.cz>
*
* This file is released under the GPLv2.
*
*/
#include <linux/suspend.h>
#include <linux/syscalls.h>
#include <linux/reboot.h>
#include <linux/string.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/fs.h>
#include <linux/mount.h>
#include <linux/pm.h>
#include <linux/console.h>
#include <linux/cpu.h>
#include <linux/freezer.h>
#include "power.h"
static int noresume = 0;
char resume_file[256] = CONFIG_PM_STD_PARTITION;
dev_t swsusp_resume_device;
sector_t swsusp_resume_block;
enum {
HIBERNATION_INVALID,
HIBERNATION_PLATFORM,
HIBERNATION_TEST,
HIBERNATION_TESTPROC,
HIBERNATION_SHUTDOWN,
HIBERNATION_REBOOT,
/* keep last */
__HIBERNATION_AFTER_LAST
};
#define HIBERNATION_MAX (__HIBERNATION_AFTER_LAST-1)
#define HIBERNATION_FIRST (HIBERNATION_INVALID + 1)
static int hibernation_mode = HIBERNATION_SHUTDOWN;
static struct hibernation_ops *hibernation_ops;
/**
* hibernation_set_ops - set the global hibernate operations
* @ops: the hibernation operations to use in subsequent hibernation transitions
*/
void hibernation_set_ops(struct hibernation_ops *ops)
{
if (ops && !(ops->prepare && ops->enter && ops->finish
&& ops->pre_restore && ops->restore_cleanup)) {
WARN_ON(1);
return;
}
mutex_lock(&pm_mutex);
hibernation_ops = ops;
if (ops)
hibernation_mode = HIBERNATION_PLATFORM;
else if (hibernation_mode == HIBERNATION_PLATFORM)
hibernation_mode = HIBERNATION_SHUTDOWN;
mutex_unlock(&pm_mutex);
}
/**
* platform_prepare - prepare the machine for hibernation using the
* platform driver if so configured and return an error code if it fails
*/
static int platform_prepare(int platform_mode)
{
return (platform_mode && hibernation_ops) ?
hibernation_ops->prepare() : 0;
}
/**
* platform_finish - switch the machine to the normal mode of operation
* using the platform driver (must be called after platform_prepare())
*/
static void platform_finish(int platform_mode)
{
if (platform_mode && hibernation_ops)
hibernation_ops->finish();
}
/**
* platform_pre_restore - prepare the platform for the restoration from a
* hibernation image. If the restore fails after this function has been
* called, platform_restore_cleanup() must be called.
*/
static int platform_pre_restore(int platform_mode)
{
return (platform_mode && hibernation_ops) ?
hibernation_ops->pre_restore() : 0;
}
/**
* platform_restore_cleanup - switch the platform to the normal mode of
* operation after a failing restore. If platform_pre_restore() has been
* called before the failing restore, this function must be called too,
* regardless of the result of platform_pre_restore().
*/
static void platform_restore_cleanup(int platform_mode)
{
if (platform_mode && hibernation_ops)
hibernation_ops->restore_cleanup();
}
/**
* hibernation_snapshot - quiesce devices and create the hibernation
* snapshot image.
* @platform_mode - if set, use the platform driver, if available, to
* prepare the platform frimware for the power transition.
*
* Must be called with pm_mutex held
*/
int hibernation_snapshot(int platform_mode)
{
int error;
/* Free memory before shutting down devices. */
error = swsusp_shrink_memory();
if (error)
return error;
suspend_console();
error = device_suspend(PMSG_FREEZE);
if (error)
goto Resume_console;
error = platform_prepare(platform_mode);
if (error)
goto Resume_devices;
error = disable_nonboot_cpus();
if (!error) {
if (hibernation_mode != HIBERNATION_TEST) {
in_suspend = 1;
error = swsusp_suspend();
/* Control returns here after successful restore */
} else {
printk("swsusp debug: Waiting for 5 seconds.\n");
mdelay(5000);
}
}
enable_nonboot_cpus();
Resume_devices:
platform_finish(platform_mode);
device_resume();
Resume_console:
resume_console();
return error;
}
/**
* hibernation_restore - quiesce devices and restore the hibernation
* snapshot image. If successful, control returns in hibernation_snaphot()
* @platform_mode - if set, use the platform driver, if available, to
* prepare the platform frimware for the transition.
*
* Must be called with pm_mutex held
*/
int hibernation_restore(int platform_mode)
{
int error;
pm_prepare_console();
suspend_console();
error = device_suspend(PMSG_PRETHAW);
if (error)
goto Finish;
error = platform_pre_restore(platform_mode);
if (!error) {
error = disable_nonboot_cpus();
if (!error)
error = swsusp_resume();
enable_nonboot_cpus();
}
platform_restore_cleanup(platform_mode);
device_resume();
Finish:
resume_console();
pm_restore_console();
return error;
}
/**
* hibernation_platform_enter - enter the hibernation state using the
* platform driver (if available)
*/
int hibernation_platform_enter(void)
{
int error;
if (hibernation_ops) {
kernel_shutdown_prepare(SYSTEM_SUSPEND_DISK);
/*
* We have cancelled the power transition by running
* hibernation_ops->finish() before saving the image, so we
* should let the firmware know that we're going to enter the
* sleep state after all
*/
error = hibernation_ops->prepare();
sysdev_shutdown();
if (!error)
error = hibernation_ops->enter();
} else {
error = -ENOSYS;
}
return error;
}
/**
* power_down - Shut the machine down for hibernation.
*
* Use the platform driver, if configured so; otherwise try
* to power off or reboot.
*/
static void power_down(void)
{
switch (hibernation_mode) {
case HIBERNATION_TEST:
case HIBERNATION_TESTPROC:
break;
case HIBERNATION_SHUTDOWN:
kernel_power_off();
break;
case HIBERNATION_REBOOT:
kernel_restart(NULL);
break;
case HIBERNATION_PLATFORM:
hibernation_platform_enter();
}
kernel_halt();
/*
* Valid image is on the disk, if we continue we risk serious data
* corruption after resume.
*/
printk(KERN_CRIT "Please power me down manually\n");
while(1);
}
static void unprepare_processes(void)
{
thaw_processes();
pm_restore_console();
}
static int prepare_processes(void)
{
int error = 0;
pm_prepare_console();
if (freeze_processes()) {
error = -EBUSY;
unprepare_processes();
}
return error;
}
/**
* hibernate - The granpappy of the built-in hibernation management
*/
int hibernate(void)
{
int error;
mutex_lock(&pm_mutex);
/* The snapshot device should not be opened while we're running */
if (!atomic_add_unless(&snapshot_device_available, -1, 0)) {
error = -EBUSY;
goto Unlock;
}
error = pm_notifier_call_chain(PM_HIBERNATION_PREPARE);
if (error)
goto Exit;
/* Allocate memory management structures */
error = create_basic_memory_bitmaps();
if (error)
goto Exit;
error = prepare_processes();
if (error)
goto Finish;
if (hibernation_mode == HIBERNATION_TESTPROC) {
printk("swsusp debug: Waiting for 5 seconds.\n");
mdelay(5000);
goto Thaw;
}
error = hibernation_snapshot(hibernation_mode == HIBERNATION_PLATFORM);
if (in_suspend && !error) {
unsigned int flags = 0;
if (hibernation_mode == HIBERNATION_PLATFORM)
flags |= SF_PLATFORM_MODE;
pr_debug("PM: writing image.\n");
error = swsusp_write(flags);
swsusp_free();
if (!error)
power_down();
} else {
pr_debug("PM: Image restored successfully.\n");
swsusp_free();
}
Thaw:
unprepare_processes();
Finish:
free_basic_memory_bitmaps();
Exit:
pm_notifier_call_chain(PM_POST_HIBERNATION);
atomic_inc(&snapshot_device_available);
Unlock:
mutex_unlock(&pm_mutex);
return error;
}
/**
* software_resume - Resume from a saved image.
*
* Called as a late_initcall (so all devices are discovered and
* initialized), we call swsusp to see if we have a saved image or not.
* If so, we quiesce devices, the restore the saved image. We will
* return above (in hibernate() ) if everything goes well.
* Otherwise, we fail gracefully and return to the normally
* scheduled program.
*
*/
static int software_resume(void)
{
int error;
unsigned int flags;
mutex_lock(&pm_mutex);
if (!swsusp_resume_device) {
if (!strlen(resume_file)) {
mutex_unlock(&pm_mutex);
return -ENOENT;
}
swsusp_resume_device = name_to_dev_t(resume_file);
pr_debug("swsusp: Resume From Partition %s\n", resume_file);
} else {
pr_debug("swsusp: Resume From Partition %d:%d\n",
MAJOR(swsusp_resume_device), MINOR(swsusp_resume_device));
}
if (noresume) {
/**
* FIXME: If noresume is specified, we need to find the partition
* and reset it back to normal swap space.
*/
mutex_unlock(&pm_mutex);
return 0;
}
pr_debug("PM: Checking swsusp image.\n");
error = swsusp_check();
if (error)
goto Unlock;
/* The snapshot device should not be opened while we're running */
if (!atomic_add_unless(&snapshot_device_available, -1, 0)) {
error = -EBUSY;
goto Unlock;
}
error = create_basic_memory_bitmaps();
if (error)
goto Finish;
pr_debug("PM: Preparing processes for restore.\n");
error = prepare_processes();
if (error) {
swsusp_close();
goto Done;
}
pr_debug("PM: Reading swsusp image.\n");
error = swsusp_read(&flags);
if (!error)
hibernation_restore(flags & SF_PLATFORM_MODE);
printk(KERN_ERR "PM: Restore failed, recovering.\n");
swsusp_free();
unprepare_processes();
Done:
free_basic_memory_bitmaps();
Finish:
atomic_inc(&snapshot_device_available);
/* For success case, the suspend path will release the lock */
Unlock:
mutex_unlock(&pm_mutex);
pr_debug("PM: Resume from disk failed.\n");
return error;
}
late_initcall(software_resume);
static const char * const hibernation_modes[] = {
[HIBERNATION_PLATFORM] = "platform",
[HIBERNATION_SHUTDOWN] = "shutdown",
[HIBERNATION_REBOOT] = "reboot",
[HIBERNATION_TEST] = "test",
[HIBERNATION_TESTPROC] = "testproc",
};
/**
* disk - Control hibernation mode
*
* Suspend-to-disk can be handled in several ways. We have a few options
* for putting the system to sleep - using the platform driver (e.g. ACPI
* or other hibernation_ops), powering off the system or rebooting the
* system (for testing) as well as the two test modes.
*
* The system can support 'platform', and that is known a priori (and
* encoded by the presence of hibernation_ops). However, the user may
* choose 'shutdown' or 'reboot' as alternatives, as well as one fo the
* test modes, 'test' or 'testproc'.
*
* show() will display what the mode is currently set to.
* store() will accept one of
*
* 'platform'
* 'shutdown'
* 'reboot'
* 'test'
* 'testproc'
*
* It will only change to 'platform' if the system
* supports it (as determined by having hibernation_ops).
*/
static ssize_t disk_show(struct kset *kset, char *buf)
{
int i;
char *start = buf;
for (i = HIBERNATION_FIRST; i <= HIBERNATION_MAX; i++) {
if (!hibernation_modes[i])
continue;
switch (i) {
case HIBERNATION_SHUTDOWN:
case HIBERNATION_REBOOT:
case HIBERNATION_TEST:
case HIBERNATION_TESTPROC:
break;
case HIBERNATION_PLATFORM:
if (hibernation_ops)
break;
/* not a valid mode, continue with loop */
continue;
}
if (i == hibernation_mode)
buf += sprintf(buf, "[%s] ", hibernation_modes[i]);
else
buf += sprintf(buf, "%s ", hibernation_modes[i]);
}
buf += sprintf(buf, "\n");
return buf-start;
}
static ssize_t disk_store(struct kset *kset, const char *buf, size_t n)
{
int error = 0;
int i;
int len;
char *p;
int mode = HIBERNATION_INVALID;
p = memchr(buf, '\n', n);
len = p ? p - buf : n;
mutex_lock(&pm_mutex);
for (i = HIBERNATION_FIRST; i <= HIBERNATION_MAX; i++) {
if (len == strlen(hibernation_modes[i])
&& !strncmp(buf, hibernation_modes[i], len)) {
mode = i;
break;
}
}
if (mode != HIBERNATION_INVALID) {
switch (mode) {
case HIBERNATION_SHUTDOWN:
case HIBERNATION_REBOOT:
case HIBERNATION_TEST:
case HIBERNATION_TESTPROC:
hibernation_mode = mode;
break;
case HIBERNATION_PLATFORM:
if (hibernation_ops)
hibernation_mode = mode;
else
error = -EINVAL;
}
} else
error = -EINVAL;
if (!error)
pr_debug("PM: suspend-to-disk mode set to '%s'\n",
hibernation_modes[mode]);
mutex_unlock(&pm_mutex);
return error ? error : n;
}
power_attr(disk);
static ssize_t resume_show(struct kset *kset, char *buf)
{
return sprintf(buf,"%d:%d\n", MAJOR(swsusp_resume_device),
MINOR(swsusp_resume_device));
}
static ssize_t resume_store(struct kset *kset, const char *buf, size_t n)
{
unsigned int maj, min;
dev_t res;
int ret = -EINVAL;
if (sscanf(buf, "%u:%u", &maj, &min) != 2)
goto out;
res = MKDEV(maj,min);
if (maj != MAJOR(res) || min != MINOR(res))
goto out;
mutex_lock(&pm_mutex);
swsusp_resume_device = res;
mutex_unlock(&pm_mutex);
printk("Attempting manual resume\n");
noresume = 0;
software_resume();
ret = n;
out:
return ret;
}
power_attr(resume);
static ssize_t image_size_show(struct kset *kset, char *buf)
{
return sprintf(buf, "%lu\n", image_size);
}
static ssize_t image_size_store(struct kset *kset, const char *buf, size_t n)
{
unsigned long size;
if (sscanf(buf, "%lu", &size) == 1) {
image_size = size;
return n;
}
return -EINVAL;
}
power_attr(image_size);
static struct attribute * g[] = {
&disk_attr.attr,
&resume_attr.attr,
&image_size_attr.attr,
NULL,
};
static struct attribute_group attr_group = {
.attrs = g,
};
static int __init pm_disk_init(void)
{
return sysfs_create_group(&power_subsys.kobj, &attr_group);
}
core_initcall(pm_disk_init);
static int __init resume_setup(char *str)
{
if (noresume)
return 1;
strncpy( resume_file, str, 255 );
return 1;
}
static int __init resume_offset_setup(char *str)
{
unsigned long long offset;
if (noresume)
return 1;
if (sscanf(str, "%llu", &offset) == 1)
swsusp_resume_block = offset;
return 1;
}
static int __init noresume_setup(char *str)
{
noresume = 1;
return 1;
}
__setup("noresume", noresume_setup);
__setup("resume_offset=", resume_offset_setup);
__setup("resume=", resume_setup);