kernel-ark/drivers/mfd/wm8350-i2c.c
Mark Brown ebccec0fa4 mfd: Add WM8350 interrupt support
The WM8350 has an interrupt line to the CPU which is shared by the
devices on the CPU. This patch adds support for the interrupt
controller within the WM8350 which identifies which identifies the
interrupt cause. In common with other similar chips this is done
outside the standard interrupt framework due to the need to access
the interrupt controller over an interrupt-driven bus.

This code was all originally written by Liam Girdwood with updates for
submission by me.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@openedhand.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-13 21:51:56 +01:00

121 lines
2.7 KiB
C

/*
* wm8350-i2c.c -- Generic I2C driver for Wolfson WM8350 PMIC
*
* This driver defines and configures the WM8350 for the Freescale i.MX32ADS.
*
* Copyright 2007, 2008 Wolfson Microelectronics PLC.
*
* Author: Liam Girdwood
* linux@wolfsonmicro.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/mfd/wm8350/core.h>
static int wm8350_i2c_read_device(struct wm8350 *wm8350, char reg,
int bytes, void *dest)
{
int ret;
ret = i2c_master_send(wm8350->i2c_client, &reg, 1);
if (ret < 0)
return ret;
return i2c_master_recv(wm8350->i2c_client, dest, bytes);
}
static int wm8350_i2c_write_device(struct wm8350 *wm8350, char reg,
int bytes, void *src)
{
/* we add 1 byte for device register */
u8 msg[(WM8350_MAX_REGISTER << 1) + 1];
if (bytes > ((WM8350_MAX_REGISTER << 1) + 1))
return -EINVAL;
msg[0] = reg;
memcpy(&msg[1], src, bytes);
return i2c_master_send(wm8350->i2c_client, msg, bytes + 1);
}
static int wm8350_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct wm8350 *wm8350;
int ret = 0;
wm8350 = kzalloc(sizeof(struct wm8350), GFP_KERNEL);
if (wm8350 == NULL) {
kfree(i2c);
return -ENOMEM;
}
i2c_set_clientdata(i2c, wm8350);
wm8350->dev = &i2c->dev;
wm8350->i2c_client = i2c;
wm8350->read_dev = wm8350_i2c_read_device;
wm8350->write_dev = wm8350_i2c_write_device;
ret = wm8350_device_init(wm8350, i2c->irq, i2c->dev.platform_data);
if (ret < 0)
goto err;
return ret;
err:
kfree(wm8350);
return ret;
}
static int wm8350_i2c_remove(struct i2c_client *i2c)
{
struct wm8350 *wm8350 = i2c_get_clientdata(i2c);
wm8350_device_exit(wm8350);
kfree(wm8350);
return 0;
}
static const struct i2c_device_id wm8350_i2c_id[] = {
{ "wm8350", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, wm8350_i2c_id);
static struct i2c_driver wm8350_i2c_driver = {
.driver = {
.name = "wm8350",
.owner = THIS_MODULE,
},
.probe = wm8350_i2c_probe,
.remove = wm8350_i2c_remove,
.id_table = wm8350_i2c_id,
};
static int __init wm8350_i2c_init(void)
{
return i2c_add_driver(&wm8350_i2c_driver);
}
/* init early so consumer devices can complete system boot */
subsys_initcall(wm8350_i2c_init);
static void __exit wm8350_i2c_exit(void)
{
i2c_del_driver(&wm8350_i2c_driver);
}
module_exit(wm8350_i2c_exit);
MODULE_DESCRIPTION("I2C support for the WM8350 AudioPlus PMIC");
MODULE_LICENSE("GPL");