kernel-ark/sound/soc/pxa/corgi.c
Liam Girdwood 022658beab ASoC: core: Add support for DAI and machine kcontrols.
Currently ASoC can only add kcontrols using codec and platform component device
handles. It's also desirable to add kcontrols for DAIs (i.e. McBSP) and for
SoC card machine drivers too. This allows the kcontrol to have a direct handle to
the parent ASoC component DAI/SoC Card/Platform/Codec device and hence easily
get it's private data.

This change makes snd_soc_add_controls() static and wraps it in the folowing
calls (card and dai are new) :-

snd_soc_add_card_controls()
snd_soc_add_codec_controls()
snd_soc_add_dai_controls()
snd_soc_add_platform_controls()

This patch also does a lot of small mechanical changes in individual codec drivers
to replace snd_soc_add_controls() with snd_soc_add_codec_controls().

It also updates the McBSP DAI driver to use snd_soc_add_dai_controls().

Finally, it updates the existing machine drivers that register controls to either :-

1) Use snd_soc_add_card_controls() where no direct codec control is required.
2) Use snd_soc_add_codec_controls() where there is direct codec control.

In the case of 1) above we also update the machine drivers to get the correct
component data pointers from the kcontrol (rather than getting the machine pointer
via the codec pointer).

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-04 12:40:11 +00:00

344 lines
8.9 KiB
C

/*
* corgi.c -- SoC audio for Corgi
*
* Copyright 2005 Wolfson Microelectronics PLC.
* Copyright 2005 Openedhand Ltd.
*
* Authors: Liam Girdwood <lrg@slimlogic.co.uk>
* Richard Purdie <richard@openedhand.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/timer.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <asm/mach-types.h>
#include <mach/corgi.h>
#include <mach/audio.h>
#include "../codecs/wm8731.h"
#include "pxa2xx-i2s.h"
#define CORGI_HP 0
#define CORGI_MIC 1
#define CORGI_LINE 2
#define CORGI_HEADSET 3
#define CORGI_HP_OFF 4
#define CORGI_SPK_ON 0
#define CORGI_SPK_OFF 1
/* audio clock in Hz - rounded from 12.235MHz */
#define CORGI_AUDIO_CLOCK 12288000
static int corgi_jack_func;
static int corgi_spk_func;
static void corgi_ext_control(struct snd_soc_dapm_context *dapm)
{
/* set up jack connection */
switch (corgi_jack_func) {
case CORGI_HP:
/* set = unmute headphone */
gpio_set_value(CORGI_GPIO_MUTE_L, 1);
gpio_set_value(CORGI_GPIO_MUTE_R, 1);
snd_soc_dapm_disable_pin(dapm, "Mic Jack");
snd_soc_dapm_disable_pin(dapm, "Line Jack");
snd_soc_dapm_enable_pin(dapm, "Headphone Jack");
snd_soc_dapm_disable_pin(dapm, "Headset Jack");
break;
case CORGI_MIC:
/* reset = mute headphone */
gpio_set_value(CORGI_GPIO_MUTE_L, 0);
gpio_set_value(CORGI_GPIO_MUTE_R, 0);
snd_soc_dapm_enable_pin(dapm, "Mic Jack");
snd_soc_dapm_disable_pin(dapm, "Line Jack");
snd_soc_dapm_disable_pin(dapm, "Headphone Jack");
snd_soc_dapm_disable_pin(dapm, "Headset Jack");
break;
case CORGI_LINE:
gpio_set_value(CORGI_GPIO_MUTE_L, 0);
gpio_set_value(CORGI_GPIO_MUTE_R, 0);
snd_soc_dapm_disable_pin(dapm, "Mic Jack");
snd_soc_dapm_enable_pin(dapm, "Line Jack");
snd_soc_dapm_disable_pin(dapm, "Headphone Jack");
snd_soc_dapm_disable_pin(dapm, "Headset Jack");
break;
case CORGI_HEADSET:
gpio_set_value(CORGI_GPIO_MUTE_L, 0);
gpio_set_value(CORGI_GPIO_MUTE_R, 1);
snd_soc_dapm_enable_pin(dapm, "Mic Jack");
snd_soc_dapm_disable_pin(dapm, "Line Jack");
snd_soc_dapm_disable_pin(dapm, "Headphone Jack");
snd_soc_dapm_enable_pin(dapm, "Headset Jack");
break;
}
if (corgi_spk_func == CORGI_SPK_ON)
snd_soc_dapm_enable_pin(dapm, "Ext Spk");
else
snd_soc_dapm_disable_pin(dapm, "Ext Spk");
/* signal a DAPM event */
snd_soc_dapm_sync(dapm);
}
static int corgi_startup(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_codec *codec = rtd->codec;
mutex_lock(&codec->mutex);
/* check the jack status at stream startup */
corgi_ext_control(&codec->dapm);
mutex_unlock(&codec->mutex);
return 0;
}
/* we need to unmute the HP at shutdown as the mute burns power on corgi */
static void corgi_shutdown(struct snd_pcm_substream *substream)
{
/* set = unmute headphone */
gpio_set_value(CORGI_GPIO_MUTE_L, 1);
gpio_set_value(CORGI_GPIO_MUTE_R, 1);
}
static int corgi_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
unsigned int clk = 0;
int ret = 0;
switch (params_rate(params)) {
case 8000:
case 16000:
case 48000:
case 96000:
clk = 12288000;
break;
case 11025:
case 22050:
case 44100:
clk = 11289600;
break;
}
/* set the codec system clock for DAC and ADC */
ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK_XTAL, clk,
SND_SOC_CLOCK_IN);
if (ret < 0)
return ret;
/* set the I2S system clock as input (unused) */
ret = snd_soc_dai_set_sysclk(cpu_dai, PXA2XX_I2S_SYSCLK, 0,
SND_SOC_CLOCK_IN);
if (ret < 0)
return ret;
return 0;
}
static struct snd_soc_ops corgi_ops = {
.startup = corgi_startup,
.hw_params = corgi_hw_params,
.shutdown = corgi_shutdown,
};
static int corgi_get_jack(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
ucontrol->value.integer.value[0] = corgi_jack_func;
return 0;
}
static int corgi_set_jack(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_card *card = snd_kcontrol_chip(kcontrol);
if (corgi_jack_func == ucontrol->value.integer.value[0])
return 0;
corgi_jack_func = ucontrol->value.integer.value[0];
corgi_ext_control(&card->dapm);
return 1;
}
static int corgi_get_spk(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
ucontrol->value.integer.value[0] = corgi_spk_func;
return 0;
}
static int corgi_set_spk(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_card *card = snd_kcontrol_chip(kcontrol);
if (corgi_spk_func == ucontrol->value.integer.value[0])
return 0;
corgi_spk_func = ucontrol->value.integer.value[0];
corgi_ext_control(&card->dapm);
return 1;
}
static int corgi_amp_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *k, int event)
{
gpio_set_value(CORGI_GPIO_APM_ON, SND_SOC_DAPM_EVENT_ON(event));
return 0;
}
static int corgi_mic_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *k, int event)
{
gpio_set_value(CORGI_GPIO_MIC_BIAS, SND_SOC_DAPM_EVENT_ON(event));
return 0;
}
/* corgi machine dapm widgets */
static const struct snd_soc_dapm_widget wm8731_dapm_widgets[] = {
SND_SOC_DAPM_HP("Headphone Jack", NULL),
SND_SOC_DAPM_MIC("Mic Jack", corgi_mic_event),
SND_SOC_DAPM_SPK("Ext Spk", corgi_amp_event),
SND_SOC_DAPM_LINE("Line Jack", NULL),
SND_SOC_DAPM_HP("Headset Jack", NULL),
};
/* Corgi machine audio map (connections to the codec pins) */
static const struct snd_soc_dapm_route corgi_audio_map[] = {
/* headset Jack - in = micin, out = LHPOUT*/
{"Headset Jack", NULL, "LHPOUT"},
/* headphone connected to LHPOUT1, RHPOUT1 */
{"Headphone Jack", NULL, "LHPOUT"},
{"Headphone Jack", NULL, "RHPOUT"},
/* speaker connected to LOUT, ROUT */
{"Ext Spk", NULL, "ROUT"},
{"Ext Spk", NULL, "LOUT"},
/* mic is connected to MICIN (via right channel of headphone jack) */
{"MICIN", NULL, "Mic Jack"},
/* Same as the above but no mic bias for line signals */
{"MICIN", NULL, "Line Jack"},
};
static const char *jack_function[] = {"Headphone", "Mic", "Line", "Headset",
"Off"};
static const char *spk_function[] = {"On", "Off"};
static const struct soc_enum corgi_enum[] = {
SOC_ENUM_SINGLE_EXT(5, jack_function),
SOC_ENUM_SINGLE_EXT(2, spk_function),
};
static const struct snd_kcontrol_new wm8731_corgi_controls[] = {
SOC_ENUM_EXT("Jack Function", corgi_enum[0], corgi_get_jack,
corgi_set_jack),
SOC_ENUM_EXT("Speaker Function", corgi_enum[1], corgi_get_spk,
corgi_set_spk),
};
/*
* Logic for a wm8731 as connected on a Sharp SL-C7x0 Device
*/
static int corgi_wm8731_init(struct snd_soc_pcm_runtime *rtd)
{
struct snd_soc_codec *codec = rtd->codec;
struct snd_soc_dapm_context *dapm = &codec->dapm;
snd_soc_dapm_nc_pin(dapm, "LLINEIN");
snd_soc_dapm_nc_pin(dapm, "RLINEIN");
return 0;
}
/* corgi digital audio interface glue - connects codec <--> CPU */
static struct snd_soc_dai_link corgi_dai = {
.name = "WM8731",
.stream_name = "WM8731",
.cpu_dai_name = "pxa2xx-i2s",
.codec_dai_name = "wm8731-hifi",
.platform_name = "pxa-pcm-audio",
.codec_name = "wm8731.0-001b",
.init = corgi_wm8731_init,
.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_CBS_CFS,
.ops = &corgi_ops,
};
/* corgi audio machine driver */
static struct snd_soc_card corgi = {
.name = "Corgi",
.owner = THIS_MODULE,
.dai_link = &corgi_dai,
.num_links = 1,
.controls = wm8731_corgi_controls,
.num_controls = ARRAY_SIZE(wm8731_corgi_controls),
.dapm_widgets = wm8731_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(wm8731_dapm_widgets),
.dapm_routes = corgi_audio_map,
.num_dapm_routes = ARRAY_SIZE(corgi_audio_map),
};
static int __devinit corgi_probe(struct platform_device *pdev)
{
struct snd_soc_card *card = &corgi;
int ret;
card->dev = &pdev->dev;
ret = snd_soc_register_card(card);
if (ret)
dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
ret);
return ret;
}
static int __devexit corgi_remove(struct platform_device *pdev)
{
struct snd_soc_card *card = platform_get_drvdata(pdev);
snd_soc_unregister_card(card);
return 0;
}
static struct platform_driver corgi_driver = {
.driver = {
.name = "corgi-audio",
.owner = THIS_MODULE,
},
.probe = corgi_probe,
.remove = __devexit_p(corgi_remove),
};
module_platform_driver(corgi_driver);
/* Module information */
MODULE_AUTHOR("Richard Purdie");
MODULE_DESCRIPTION("ALSA SoC Corgi");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:corgi-audio");