kernel-ark/include/asm-mips/pci.h
Len Brown 5028770a42 [ACPI] merge acpi-2.6.12 branch into latest Linux 2.6.13-rc...
Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-12 17:21:56 -04:00

171 lines
4.8 KiB
C

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#ifndef _ASM_PCI_H
#define _ASM_PCI_H
#include <linux/config.h>
#include <linux/mm.h>
#ifdef __KERNEL__
/*
* This file essentially defines the interface between board
* specific PCI code and MIPS common PCI code. Should potentially put
* into include/asm/pci.h file.
*/
#include <linux/ioport.h>
/*
* Each pci channel is a top-level PCI bus seem by CPU. A machine with
* multiple PCI channels may have multiple PCI host controllers or a
* single controller supporting multiple channels.
*/
struct pci_controller {
struct pci_controller *next;
struct pci_bus *bus;
struct pci_ops *pci_ops;
struct resource *mem_resource;
unsigned long mem_offset;
struct resource *io_resource;
unsigned long io_offset;
unsigned int index;
/* For compatibility with current (as of July 2003) pciutils
and XFree86. Eventually will be removed. */
unsigned int need_domain_info;
int iommu;
};
/*
* Used by boards to register their PCI busses before the actual scanning.
*/
extern struct pci_controller * alloc_pci_controller(void);
extern void register_pci_controller(struct pci_controller *hose);
/*
* board supplied pci irq fixup routine
*/
extern int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin);
/* Can be used to override the logic in pci_scan_bus for skipping
already-configured bus numbers - to be used for buggy BIOSes
or architectures with incomplete PCI setup by the loader */
extern unsigned int pcibios_assign_all_busses(void);
#define pcibios_scan_all_fns(a, b) 0
extern unsigned long PCIBIOS_MIN_IO;
extern unsigned long PCIBIOS_MIN_MEM;
#define PCIBIOS_MIN_CARDBUS_IO 0x4000
extern void pcibios_set_master(struct pci_dev *dev);
static inline void pcibios_penalize_isa_irq(int irq, int active)
{
/* We don't do dynamic PCI IRQ allocation */
}
/*
* Dynamic DMA mapping stuff.
* MIPS has everything mapped statically.
*/
#include <linux/types.h>
#include <linux/slab.h>
#include <asm/scatterlist.h>
#include <linux/string.h>
#include <asm/io.h>
struct pci_dev;
/*
* The PCI address space does equal the physical memory address space. The
* networking and block device layers use this boolean for bounce buffer
* decisions. This is set if any hose does not have an IOMMU.
*/
extern unsigned int PCI_DMA_BUS_IS_PHYS;
#ifdef CONFIG_MAPPED_DMA_IO
/* pci_unmap_{single,page} is not a nop, thus... */
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME;
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) __u32 LEN_NAME;
#define pci_unmap_addr(PTR, ADDR_NAME) ((PTR)->ADDR_NAME)
#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) (((PTR)->ADDR_NAME) = (VAL))
#define pci_unmap_len(PTR, LEN_NAME) ((PTR)->LEN_NAME)
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) (((PTR)->LEN_NAME) = (VAL))
#else /* CONFIG_MAPPED_DMA_IO */
/* pci_unmap_{page,single} is a nop so... */
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
#define pci_unmap_addr(PTR, ADDR_NAME) (0)
#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
#define pci_unmap_len(PTR, LEN_NAME) (0)
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
#endif /* CONFIG_MAPPED_DMA_IO */
/* This is always fine. */
#define pci_dac_dma_supported(pci_dev, mask) (1)
extern dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev,
struct page *page, unsigned long offset, int direction);
extern struct page *pci_dac_dma_to_page(struct pci_dev *pdev,
dma64_addr_t dma_addr);
extern unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev,
dma64_addr_t dma_addr);
extern void pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev,
dma64_addr_t dma_addr, size_t len, int direction);
extern void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev,
dma64_addr_t dma_addr, size_t len, int direction);
#ifdef CONFIG_PCI
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
unsigned long *strategy_parameter)
{
*strat = PCI_DMA_BURST_INFINITY;
*strategy_parameter = ~0UL;
}
#endif
extern void pcibios_resource_to_bus(struct pci_dev *dev,
struct pci_bus_region *region, struct resource *res);
#ifdef CONFIG_PCI_DOMAINS
#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
static inline int pci_proc_domain(struct pci_bus *bus)
{
struct pci_controller *hose = bus->sysdata;
return hose->need_domain_info;
}
#endif /* CONFIG_PCI_DOMAINS */
#endif /* __KERNEL__ */
/* implement the pci_ DMA API in terms of the generic device dma_ one */
#include <asm-generic/pci-dma-compat.h>
static inline void pcibios_add_platform_entries(struct pci_dev *dev)
{
}
/* Do platform specific device initialization at pci_enable_device() time */
extern int pcibios_plat_dev_init(struct pci_dev *dev);
#endif /* _ASM_PCI_H */