1727339590
The CLOCKSOURCE_OF_DECLARE macro is used widely for the timers to declare the clocksource at early stage. However, this macro is also used to initialize the clockevent if any, or the clockevent only. It was originally suggested to declare another macro to initialize a clockevent, so in order to separate the two entities even they belong to the same IP. This was not accepted because of the impact on the DT where splitting a clocksource/clockevent definition does not make sense as it is a Linux concept not a hardware description. On the other side, the clocksource has not interrupt declared while the clockevent has, so it is easy from the driver to know if the description is for a clockevent or a clocksource, IOW it could be implemented at the driver level. So instead of dealing with a named clocksource macro, let's use a more generic one: TIMER_OF_DECLARE. The patch has not functional changes. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
278 lines
6.2 KiB
C
278 lines
6.2 KiB
C
/*
|
|
* Copyright (C) 2015 ARM Limited
|
|
*
|
|
* Author: Vladimir Murzin <vladimir.murzin@arm.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/clockchips.h>
|
|
#include <linux/clocksource.h>
|
|
#include <linux/err.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/sched_clock.h>
|
|
#include <linux/slab.h>
|
|
|
|
#define TIMER_CTRL 0x0
|
|
#define TIMER_CTRL_ENABLE BIT(0)
|
|
#define TIMER_CTRL_IE BIT(3)
|
|
|
|
#define TIMER_VALUE 0x4
|
|
#define TIMER_RELOAD 0x8
|
|
#define TIMER_INT 0xc
|
|
|
|
struct clockevent_mps2 {
|
|
void __iomem *reg;
|
|
u32 clock_count_per_tick;
|
|
struct clock_event_device clkevt;
|
|
};
|
|
|
|
static void __iomem *sched_clock_base;
|
|
|
|
static u64 notrace mps2_sched_read(void)
|
|
{
|
|
return ~readl_relaxed(sched_clock_base + TIMER_VALUE);
|
|
}
|
|
|
|
static inline struct clockevent_mps2 *to_mps2_clkevt(struct clock_event_device *c)
|
|
{
|
|
return container_of(c, struct clockevent_mps2, clkevt);
|
|
}
|
|
|
|
static void clockevent_mps2_writel(u32 val, struct clock_event_device *c, u32 offset)
|
|
{
|
|
writel_relaxed(val, to_mps2_clkevt(c)->reg + offset);
|
|
}
|
|
|
|
static int mps2_timer_shutdown(struct clock_event_device *ce)
|
|
{
|
|
clockevent_mps2_writel(0, ce, TIMER_RELOAD);
|
|
clockevent_mps2_writel(0, ce, TIMER_CTRL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mps2_timer_set_next_event(unsigned long next, struct clock_event_device *ce)
|
|
{
|
|
clockevent_mps2_writel(next, ce, TIMER_VALUE);
|
|
clockevent_mps2_writel(TIMER_CTRL_IE | TIMER_CTRL_ENABLE, ce, TIMER_CTRL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mps2_timer_set_periodic(struct clock_event_device *ce)
|
|
{
|
|
u32 clock_count_per_tick = to_mps2_clkevt(ce)->clock_count_per_tick;
|
|
|
|
clockevent_mps2_writel(clock_count_per_tick, ce, TIMER_RELOAD);
|
|
clockevent_mps2_writel(clock_count_per_tick, ce, TIMER_VALUE);
|
|
clockevent_mps2_writel(TIMER_CTRL_IE | TIMER_CTRL_ENABLE, ce, TIMER_CTRL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t mps2_timer_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct clockevent_mps2 *ce = dev_id;
|
|
u32 status = readl_relaxed(ce->reg + TIMER_INT);
|
|
|
|
if (!status) {
|
|
pr_warn("spurious interrupt\n");
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
writel_relaxed(1, ce->reg + TIMER_INT);
|
|
|
|
ce->clkevt.event_handler(&ce->clkevt);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int __init mps2_clockevent_init(struct device_node *np)
|
|
{
|
|
void __iomem *base;
|
|
struct clk *clk = NULL;
|
|
struct clockevent_mps2 *ce;
|
|
u32 rate;
|
|
int irq, ret;
|
|
const char *name = "mps2-clkevt";
|
|
|
|
ret = of_property_read_u32(np, "clock-frequency", &rate);
|
|
if (ret) {
|
|
clk = of_clk_get(np, 0);
|
|
if (IS_ERR(clk)) {
|
|
ret = PTR_ERR(clk);
|
|
pr_err("failed to get clock for clockevent: %d\n", ret);
|
|
goto out;
|
|
}
|
|
|
|
ret = clk_prepare_enable(clk);
|
|
if (ret) {
|
|
pr_err("failed to enable clock for clockevent: %d\n", ret);
|
|
goto out_clk_put;
|
|
}
|
|
|
|
rate = clk_get_rate(clk);
|
|
}
|
|
|
|
base = of_iomap(np, 0);
|
|
if (!base) {
|
|
ret = -EADDRNOTAVAIL;
|
|
pr_err("failed to map register for clockevent: %d\n", ret);
|
|
goto out_clk_disable;
|
|
}
|
|
|
|
irq = irq_of_parse_and_map(np, 0);
|
|
if (!irq) {
|
|
ret = -ENOENT;
|
|
pr_err("failed to get irq for clockevent: %d\n", ret);
|
|
goto out_iounmap;
|
|
}
|
|
|
|
ce = kzalloc(sizeof(*ce), GFP_KERNEL);
|
|
if (!ce) {
|
|
ret = -ENOMEM;
|
|
goto out_iounmap;
|
|
}
|
|
|
|
ce->reg = base;
|
|
ce->clock_count_per_tick = DIV_ROUND_CLOSEST(rate, HZ);
|
|
ce->clkevt.irq = irq;
|
|
ce->clkevt.name = name;
|
|
ce->clkevt.rating = 200;
|
|
ce->clkevt.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
|
|
ce->clkevt.cpumask = cpu_possible_mask;
|
|
ce->clkevt.set_state_shutdown = mps2_timer_shutdown,
|
|
ce->clkevt.set_state_periodic = mps2_timer_set_periodic,
|
|
ce->clkevt.set_state_oneshot = mps2_timer_shutdown,
|
|
ce->clkevt.set_next_event = mps2_timer_set_next_event;
|
|
|
|
/* Ensure timer is disabled */
|
|
writel_relaxed(0, base + TIMER_CTRL);
|
|
|
|
ret = request_irq(irq, mps2_timer_interrupt, IRQF_TIMER, name, ce);
|
|
if (ret) {
|
|
pr_err("failed to request irq for clockevent: %d\n", ret);
|
|
goto out_kfree;
|
|
}
|
|
|
|
clockevents_config_and_register(&ce->clkevt, rate, 0xf, 0xffffffff);
|
|
|
|
return 0;
|
|
|
|
out_kfree:
|
|
kfree(ce);
|
|
out_iounmap:
|
|
iounmap(base);
|
|
out_clk_disable:
|
|
/* clk_{disable, unprepare, put}() can handle NULL as a parameter */
|
|
clk_disable_unprepare(clk);
|
|
out_clk_put:
|
|
clk_put(clk);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int __init mps2_clocksource_init(struct device_node *np)
|
|
{
|
|
void __iomem *base;
|
|
struct clk *clk = NULL;
|
|
u32 rate;
|
|
int ret;
|
|
const char *name = "mps2-clksrc";
|
|
|
|
ret = of_property_read_u32(np, "clock-frequency", &rate);
|
|
if (ret) {
|
|
clk = of_clk_get(np, 0);
|
|
if (IS_ERR(clk)) {
|
|
ret = PTR_ERR(clk);
|
|
pr_err("failed to get clock for clocksource: %d\n", ret);
|
|
goto out;
|
|
}
|
|
|
|
ret = clk_prepare_enable(clk);
|
|
if (ret) {
|
|
pr_err("failed to enable clock for clocksource: %d\n", ret);
|
|
goto out_clk_put;
|
|
}
|
|
|
|
rate = clk_get_rate(clk);
|
|
}
|
|
|
|
base = of_iomap(np, 0);
|
|
if (!base) {
|
|
ret = -EADDRNOTAVAIL;
|
|
pr_err("failed to map register for clocksource: %d\n", ret);
|
|
goto out_clk_disable;
|
|
}
|
|
|
|
/* Ensure timer is disabled */
|
|
writel_relaxed(0, base + TIMER_CTRL);
|
|
|
|
/* ... and set it up as free-running clocksource */
|
|
writel_relaxed(0xffffffff, base + TIMER_VALUE);
|
|
writel_relaxed(0xffffffff, base + TIMER_RELOAD);
|
|
|
|
writel_relaxed(TIMER_CTRL_ENABLE, base + TIMER_CTRL);
|
|
|
|
ret = clocksource_mmio_init(base + TIMER_VALUE, name,
|
|
rate, 200, 32,
|
|
clocksource_mmio_readl_down);
|
|
if (ret) {
|
|
pr_err("failed to init clocksource: %d\n", ret);
|
|
goto out_iounmap;
|
|
}
|
|
|
|
sched_clock_base = base;
|
|
sched_clock_register(mps2_sched_read, 32, rate);
|
|
|
|
return 0;
|
|
|
|
out_iounmap:
|
|
iounmap(base);
|
|
out_clk_disable:
|
|
/* clk_{disable, unprepare, put}() can handle NULL as a parameter */
|
|
clk_disable_unprepare(clk);
|
|
out_clk_put:
|
|
clk_put(clk);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int __init mps2_timer_init(struct device_node *np)
|
|
{
|
|
static int has_clocksource, has_clockevent;
|
|
int ret;
|
|
|
|
if (!has_clocksource) {
|
|
ret = mps2_clocksource_init(np);
|
|
if (!ret) {
|
|
has_clocksource = 1;
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
if (!has_clockevent) {
|
|
ret = mps2_clockevent_init(np);
|
|
if (!ret) {
|
|
has_clockevent = 1;
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
TIMER_OF_DECLARE(mps2_timer, "arm,mps2-timer", mps2_timer_init);
|