kernel-ark/drivers/input/misc/dm355evm_keys.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

283 lines
8.1 KiB
C

/*
* dm355evm_keys.c - support buttons and IR remote on DM355 EVM board
*
* Copyright (c) 2008 by David Brownell
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/input/sparse-keymap.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/i2c/dm355evm_msp.h>
/*
* The MSP430 firmware on the DM355 EVM monitors on-board pushbuttons
* and an IR receptor used for the remote control. When any key is
* pressed, or its autorepeat kicks in, an event is sent. This driver
* read those events from the small (32 event) queue and reports them.
*
* Note that physically there can only be one of these devices.
*
* This driver was tested with firmware revision A4.
*/
struct dm355evm_keys {
struct input_dev *input;
struct device *dev;
int irq;
};
/* These initial keycodes can be remapped */
static const struct key_entry dm355evm_keys[] = {
/*
* Pushbuttons on the EVM board ... note that the labels for these
* are SW10/SW11/etc on the PC board. The left/right orientation
* comes only from the firmware's documentation, and presumes the
* power connector is immediately in front of you and the IR sensor
* is to the right. (That is, rotate the board counter-clockwise
* by 90 degrees from the SW10/etc and "DM355 EVM" labels.)
*/
{ KE_KEY, 0x00d8, { KEY_OK } }, /* SW12 */
{ KE_KEY, 0x00b8, { KEY_UP } }, /* SW13 */
{ KE_KEY, 0x00e8, { KEY_DOWN } }, /* SW11 */
{ KE_KEY, 0x0078, { KEY_LEFT } }, /* SW14 */
{ KE_KEY, 0x00f0, { KEY_RIGHT } }, /* SW10 */
/*
* IR buttons ... codes assigned to match the universal remote
* provided with the EVM (Philips PM4S) using DVD code 0020.
*
* These event codes match firmware documentation, but other
* remote controls could easily send more RC5-encoded events.
* The PM4S manual was used in several cases to help select
* a keycode reflecting the intended usage.
*
* RC5 codes are 14 bits, with two start bits (0x3 prefix)
* and a toggle bit (masked out below).
*/
{ KE_KEY, 0x300c, { KEY_POWER } }, /* NOTE: docs omit this */
{ KE_KEY, 0x3000, { KEY_NUMERIC_0 } },
{ KE_KEY, 0x3001, { KEY_NUMERIC_1 } },
{ KE_KEY, 0x3002, { KEY_NUMERIC_2 } },
{ KE_KEY, 0x3003, { KEY_NUMERIC_3 } },
{ KE_KEY, 0x3004, { KEY_NUMERIC_4 } },
{ KE_KEY, 0x3005, { KEY_NUMERIC_5 } },
{ KE_KEY, 0x3006, { KEY_NUMERIC_6 } },
{ KE_KEY, 0x3007, { KEY_NUMERIC_7 } },
{ KE_KEY, 0x3008, { KEY_NUMERIC_8 } },
{ KE_KEY, 0x3009, { KEY_NUMERIC_9 } },
{ KE_KEY, 0x3022, { KEY_ENTER } },
{ KE_KEY, 0x30ec, { KEY_MODE } }, /* "tv/vcr/..." */
{ KE_KEY, 0x300f, { KEY_SELECT } }, /* "info" */
{ KE_KEY, 0x3020, { KEY_CHANNELUP } }, /* "up" */
{ KE_KEY, 0x302e, { KEY_MENU } }, /* "in/out" */
{ KE_KEY, 0x3011, { KEY_VOLUMEDOWN } }, /* "left" */
{ KE_KEY, 0x300d, { KEY_MUTE } }, /* "ok" */
{ KE_KEY, 0x3010, { KEY_VOLUMEUP } }, /* "right" */
{ KE_KEY, 0x301e, { KEY_SUBTITLE } }, /* "cc" */
{ KE_KEY, 0x3021, { KEY_CHANNELDOWN } },/* "down" */
{ KE_KEY, 0x3022, { KEY_PREVIOUS } },
{ KE_KEY, 0x3026, { KEY_SLEEP } },
{ KE_KEY, 0x3172, { KEY_REWIND } }, /* NOTE: docs wrongly say 0x30ca */
{ KE_KEY, 0x3175, { KEY_PLAY } },
{ KE_KEY, 0x3174, { KEY_FASTFORWARD } },
{ KE_KEY, 0x3177, { KEY_RECORD } },
{ KE_KEY, 0x3176, { KEY_STOP } },
{ KE_KEY, 0x3169, { KEY_PAUSE } },
};
/*
* Because we communicate with the MSP430 using I2C, and all I2C calls
* in Linux sleep, we use a threaded IRQ handler. The IRQ itself is
* active low, but we go through the GPIO controller so we can trigger
* on falling edges and not worry about enabling/disabling the IRQ in
* the keypress handling path.
*/
static irqreturn_t dm355evm_keys_irq(int irq, void *_keys)
{
static u16 last_event;
struct dm355evm_keys *keys = _keys;
const struct key_entry *ke;
unsigned int keycode;
int status;
u16 event;
/* For simplicity we ignore INPUT_COUNT and just read
* events until we get the "queue empty" indicator.
* Reading INPUT_LOW decrements the count.
*/
for (;;) {
status = dm355evm_msp_read(DM355EVM_MSP_INPUT_HIGH);
if (status < 0) {
dev_dbg(keys->dev, "input high err %d\n",
status);
break;
}
event = status << 8;
status = dm355evm_msp_read(DM355EVM_MSP_INPUT_LOW);
if (status < 0) {
dev_dbg(keys->dev, "input low err %d\n",
status);
break;
}
event |= status;
if (event == 0xdead)
break;
/* Press and release a button: two events, same code.
* Press and hold (autorepeat), then release: N events
* (N > 2), same code. For RC5 buttons the toggle bits
* distinguish (for example) "1-autorepeat" from "1 1";
* but PCB buttons don't support that bit.
*
* So we must synthesize release events. We do that by
* mapping events to a press/release event pair; then
* to avoid adding extra events, skip the second event
* of each pair.
*/
if (event == last_event) {
last_event = 0;
continue;
}
last_event = event;
/* ignore the RC5 toggle bit */
event &= ~0x0800;
/* find the key, or report it as unknown */
ke = sparse_keymap_entry_from_scancode(keys->input, event);
keycode = ke ? ke->keycode : KEY_UNKNOWN;
dev_dbg(keys->dev,
"input event 0x%04x--> keycode %d\n",
event, keycode);
/* report press + release */
input_report_key(keys->input, keycode, 1);
input_sync(keys->input);
input_report_key(keys->input, keycode, 0);
input_sync(keys->input);
}
return IRQ_HANDLED;
}
/*----------------------------------------------------------------------*/
static int __devinit dm355evm_keys_probe(struct platform_device *pdev)
{
struct dm355evm_keys *keys;
struct input_dev *input;
int status;
/* allocate instance struct and input dev */
keys = kzalloc(sizeof *keys, GFP_KERNEL);
input = input_allocate_device();
if (!keys || !input) {
status = -ENOMEM;
goto fail1;
}
keys->dev = &pdev->dev;
keys->input = input;
/* set up "threaded IRQ handler" */
status = platform_get_irq(pdev, 0);
if (status < 0)
goto fail1;
keys->irq = status;
input_set_drvdata(input, keys);
input->name = "DM355 EVM Controls";
input->phys = "dm355evm/input0";
input->dev.parent = &pdev->dev;
input->id.bustype = BUS_I2C;
input->id.product = 0x0355;
input->id.version = dm355evm_msp_read(DM355EVM_MSP_FIRMREV);
status = sparse_keymap_setup(input, dm355evm_keys, NULL);
if (status)
goto fail1;
/* REVISIT: flush the event queue? */
status = request_threaded_irq(keys->irq, NULL, dm355evm_keys_irq,
IRQF_TRIGGER_FALLING, dev_name(&pdev->dev), keys);
if (status < 0)
goto fail2;
/* register */
status = input_register_device(input);
if (status < 0)
goto fail3;
platform_set_drvdata(pdev, keys);
return 0;
fail3:
free_irq(keys->irq, keys);
fail2:
sparse_keymap_free(input);
fail1:
input_free_device(input);
kfree(keys);
dev_err(&pdev->dev, "can't register, err %d\n", status);
return status;
}
static int __devexit dm355evm_keys_remove(struct platform_device *pdev)
{
struct dm355evm_keys *keys = platform_get_drvdata(pdev);
free_irq(keys->irq, keys);
sparse_keymap_free(keys->input);
input_unregister_device(keys->input);
kfree(keys);
return 0;
}
/* REVISIT: add suspend/resume when DaVinci supports it. The IRQ should
* be able to wake up the system. When device_may_wakeup(&pdev->dev), call
* enable_irq_wake() on suspend, and disable_irq_wake() on resume.
*/
/*
* I2C is used to talk to the MSP430, but this platform device is
* exposed by an MFD driver that manages I2C communications.
*/
static struct platform_driver dm355evm_keys_driver = {
.probe = dm355evm_keys_probe,
.remove = __devexit_p(dm355evm_keys_remove),
.driver = {
.owner = THIS_MODULE,
.name = "dm355evm_keys",
},
};
static int __init dm355evm_keys_init(void)
{
return platform_driver_register(&dm355evm_keys_driver);
}
module_init(dm355evm_keys_init);
static void __exit dm355evm_keys_exit(void)
{
platform_driver_unregister(&dm355evm_keys_driver);
}
module_exit(dm355evm_keys_exit);
MODULE_LICENSE("GPL");