davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
dee972b967
kernel-ark/drivers/iio/dac/ad5421.c
Greg Kroah-Hartman fc52692c49 Drivers: iio: remove __dev* attributes. 
CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, and __devexit
from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03 15:57:03 -08:00

545 lines
13 KiB
C
Raw Blame History

/*
* AD5421 Digital to analog converters driver
*
* Copyright 2011 Analog Devices Inc.
*
* Licensed under the GPL-2.
*/
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
#include <linux/sysfs.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/events.h>
#include <linux/iio/dac/ad5421.h>
#define AD5421_REG_DAC_DATA 0x1
#define AD5421_REG_CTRL 0x2
#define AD5421_REG_OFFSET 0x3
#define AD5421_REG_GAIN 0x4
/* load dac and fault shared the same register number. Writing to it will cause
* a dac load command, reading from it will return the fault status register */
#define AD5421_REG_LOAD_DAC 0x5
#define AD5421_REG_FAULT 0x5
#define AD5421_REG_FORCE_ALARM_CURRENT 0x6
#define AD5421_REG_RESET 0x7
#define AD5421_REG_START_CONVERSION 0x8
#define AD5421_REG_NOOP 0x9
#define AD5421_CTRL_WATCHDOG_DISABLE BIT(12)
#define AD5421_CTRL_AUTO_FAULT_READBACK BIT(11)
#define AD5421_CTRL_MIN_CURRENT BIT(9)
#define AD5421_CTRL_ADC_SOURCE_TEMP BIT(8)
#define AD5421_CTRL_ADC_ENABLE BIT(7)
#define AD5421_CTRL_PWR_DOWN_INT_VREF BIT(6)
#define AD5421_FAULT_SPI BIT(15)
#define AD5421_FAULT_PEC BIT(14)
#define AD5421_FAULT_OVER_CURRENT BIT(13)
#define AD5421_FAULT_UNDER_CURRENT BIT(12)
#define AD5421_FAULT_TEMP_OVER_140 BIT(11)
#define AD5421_FAULT_TEMP_OVER_100 BIT(10)
#define AD5421_FAULT_UNDER_VOLTAGE_6V BIT(9)
#define AD5421_FAULT_UNDER_VOLTAGE_12V BIT(8)
/* These bits will cause the fault pin to go high */
#define AD5421_FAULT_TRIGGER_IRQ \
(AD5421_FAULT_SPI | AD5421_FAULT_PEC | AD5421_FAULT_OVER_CURRENT | \
AD5421_FAULT_UNDER_CURRENT | AD5421_FAULT_TEMP_OVER_140)
/**
* struct ad5421_state - driver instance specific data
* @spi: spi_device
* @ctrl: control register cache
* @current_range: current range which the device is configured for
* @data: spi transfer buffers
* @fault_mask: software masking of events
*/
struct ad5421_state {
struct spi_device *spi;
unsigned int ctrl;
enum ad5421_current_range current_range;
unsigned int fault_mask;
/*
* DMA (thus cache coherency maintenance) requires the
* transfer buffers to live in their own cache lines.
*/
union {
u32 d32;
u8 d8[4];
} data[2] ____cacheline_aligned;
};
static const struct iio_chan_spec ad5421_channels[] = {
{
.type = IIO_CURRENT,
.indexed = 1,
.output = 1,
.channel = 0,
.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
IIO_CHAN_INFO_SCALE_SHARED_BIT |
IIO_CHAN_INFO_OFFSET_SHARED_BIT |
IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
.scan_type = IIO_ST('u', 16, 16, 0),
.event_mask = IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING) |
IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING),
},
{
.type = IIO_TEMP,
.channel = -1,
.event_mask = IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING),
},
};
static int ad5421_write_unlocked(struct iio_dev *indio_dev,
unsigned int reg, unsigned int val)
{
struct ad5421_state *st = iio_priv(indio_dev);
st->data[0].d32 = cpu_to_be32((reg << 16) | val);
return spi_write(st->spi, &st->data[0].d8[1], 3);
}
static int ad5421_write(struct iio_dev *indio_dev, unsigned int reg,
unsigned int val)
{
int ret;
mutex_lock(&indio_dev->mlock);
ret = ad5421_write_unlocked(indio_dev, reg, val);
mutex_unlock(&indio_dev->mlock);
return ret;
}
static int ad5421_read(struct iio_dev *indio_dev, unsigned int reg)
{
struct ad5421_state *st = iio_priv(indio_dev);
struct spi_message m;
int ret;
struct spi_transfer t[] = {
{
.tx_buf = &st->data[0].d8[1],
.len = 3,
.cs_change = 1,
}, {
.rx_buf = &st->data[1].d8[1],
.len = 3,
},
};
spi_message_init(&m);
spi_message_add_tail(&t[0], &m);
spi_message_add_tail(&t[1], &m);
mutex_lock(&indio_dev->mlock);
st->data[0].d32 = cpu_to_be32((1 << 23) | (reg << 16));
ret = spi_sync(st->spi, &m);
if (ret >= 0)
ret = be32_to_cpu(st->data[1].d32) & 0xffff;
mutex_unlock(&indio_dev->mlock);
return ret;
}
static int ad5421_update_ctrl(struct iio_dev *indio_dev, unsigned int set,
unsigned int clr)
{
struct ad5421_state *st = iio_priv(indio_dev);
unsigned int ret;
mutex_lock(&indio_dev->mlock);
st->ctrl &= ~clr;
st->ctrl |= set;
ret = ad5421_write_unlocked(indio_dev, AD5421_REG_CTRL, st->ctrl);
mutex_unlock(&indio_dev->mlock);
return ret;
}
static irqreturn_t ad5421_fault_handler(int irq, void *data)
{
struct iio_dev *indio_dev = data;
struct ad5421_state *st = iio_priv(indio_dev);
unsigned int fault;
unsigned int old_fault = 0;
unsigned int events;
fault = ad5421_read(indio_dev, AD5421_REG_FAULT);
if (!fault)
return IRQ_NONE;
/* If we had a fault, this might mean that the DAC has lost its state
* and has been reset. Make sure that the control register actually
* contains what we expect it to contain. Otherwise the watchdog might
* be enabled and we get watchdog timeout faults, which will render the
* DAC unusable. */
ad5421_update_ctrl(indio_dev, 0, 0);
/* The fault pin stays high as long as a fault condition is present and
* it is not possible to mask fault conditions. For certain fault
* conditions for example like over-temperature it takes some time
* until the fault condition disappears. If we would exit the interrupt
* handler immediately after handling the event it would be entered
* again instantly. Thus we fall back to polling in case we detect that
* a interrupt condition is still present.
*/
do {
/* 0xffff is a invalid value for the register and will only be
* read if there has been a communication error */
if (fault == 0xffff)
fault = 0;
/* we are only interested in new events */
events = (old_fault ^ fault) & fault;
events &= st->fault_mask;
if (events & AD5421_FAULT_OVER_CURRENT) {
iio_push_event(indio_dev,
IIO_UNMOD_EVENT_CODE(IIO_CURRENT,
0,
IIO_EV_TYPE_THRESH,
IIO_EV_DIR_RISING),
iio_get_time_ns());
}
if (events & AD5421_FAULT_UNDER_CURRENT) {
iio_push_event(indio_dev,
IIO_UNMOD_EVENT_CODE(IIO_CURRENT,
0,
IIO_EV_TYPE_THRESH,
IIO_EV_DIR_FALLING),
iio_get_time_ns());
}
if (events & AD5421_FAULT_TEMP_OVER_140) {
iio_push_event(indio_dev,
IIO_UNMOD_EVENT_CODE(IIO_TEMP,
0,
IIO_EV_TYPE_MAG,
IIO_EV_DIR_RISING),
iio_get_time_ns());
}
old_fault = fault;
fault = ad5421_read(indio_dev, AD5421_REG_FAULT);
/* still active? go to sleep for some time */
if (fault & AD5421_FAULT_TRIGGER_IRQ)
msleep(1000);
} while (fault & AD5421_FAULT_TRIGGER_IRQ);
return IRQ_HANDLED;
}
static void ad5421_get_current_min_max(struct ad5421_state *st,
unsigned int *min, unsigned int *max)
{
/* The current range is configured using external pins, which are
* usually hard-wired and not run-time switchable. */
switch (st->current_range) {
case AD5421_CURRENT_RANGE_4mA_20mA:
*min = 4000;
*max = 20000;
break;
case AD5421_CURRENT_RANGE_3mA8_21mA:
*min = 3800;
*max = 21000;
break;
case AD5421_CURRENT_RANGE_3mA2_24mA:
*min = 3200;
*max = 24000;
break;
default:
*min = 0;
*max = 1;
break;
}
}
static inline unsigned int ad5421_get_offset(struct ad5421_state *st)
{
unsigned int min, max;
ad5421_get_current_min_max(st, &min, &max);
return (min * (1 << 16)) / (max - min);
}
static inline unsigned int ad5421_get_scale(struct ad5421_state *st)
{
unsigned int min, max;
ad5421_get_current_min_max(st, &min, &max);
return ((max - min) * 1000) / (1 << 16);
}
static int ad5421_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val, int *val2, long m)
{
struct ad5421_state *st = iio_priv(indio_dev);
int ret;
if (chan->type != IIO_CURRENT)
return -EINVAL;
switch (m) {
case IIO_CHAN_INFO_RAW:
ret = ad5421_read(indio_dev, AD5421_REG_DAC_DATA);
if (ret < 0)
return ret;
*val = ret;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
*val = 0;
*val2 = ad5421_get_scale(st);
return IIO_VAL_INT_PLUS_MICRO;
case IIO_CHAN_INFO_OFFSET:
*val = ad5421_get_offset(st);
return IIO_VAL_INT;
case IIO_CHAN_INFO_CALIBBIAS:
ret = ad5421_read(indio_dev, AD5421_REG_OFFSET);
if (ret < 0)
return ret;
*val = ret - 32768;
return IIO_VAL_INT;
case IIO_CHAN_INFO_CALIBSCALE:
ret = ad5421_read(indio_dev, AD5421_REG_GAIN);
if (ret < 0)
return ret;
*val = ret;
return IIO_VAL_INT;
}
return -EINVAL;
}
static int ad5421_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int val, int val2, long mask)
{
const unsigned int max_val = 1 << 16;
switch (mask) {
case IIO_CHAN_INFO_RAW:
if (val >= max_val || val < 0)
return -EINVAL;
return ad5421_write(indio_dev, AD5421_REG_DAC_DATA, val);
case IIO_CHAN_INFO_CALIBBIAS:
val += 32768;
if (val >= max_val || val < 0)
return -EINVAL;
return ad5421_write(indio_dev, AD5421_REG_OFFSET, val);
case IIO_CHAN_INFO_CALIBSCALE:
if (val >= max_val || val < 0)
return -EINVAL;
return ad5421_write(indio_dev, AD5421_REG_GAIN, val);
default:
break;
}
return -EINVAL;
}
static int ad5421_write_event_config(struct iio_dev *indio_dev,
u64 event_code, int state)
{
struct ad5421_state *st = iio_priv(indio_dev);
unsigned int mask;
switch (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code)) {
case IIO_CURRENT:
if (IIO_EVENT_CODE_EXTRACT_DIR(event_code) ==
IIO_EV_DIR_RISING)
mask = AD5421_FAULT_OVER_CURRENT;
else
mask = AD5421_FAULT_UNDER_CURRENT;
break;
case IIO_TEMP:
mask = AD5421_FAULT_TEMP_OVER_140;
break;
default:
return -EINVAL;
}
mutex_lock(&indio_dev->mlock);
if (state)
st->fault_mask |= mask;
else
st->fault_mask &= ~mask;
mutex_unlock(&indio_dev->mlock);
return 0;
}
static int ad5421_read_event_config(struct iio_dev *indio_dev,
u64 event_code)
{
struct ad5421_state *st = iio_priv(indio_dev);
unsigned int mask;
switch (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code)) {
case IIO_CURRENT:
if (IIO_EVENT_CODE_EXTRACT_DIR(event_code) ==
IIO_EV_DIR_RISING)
mask = AD5421_FAULT_OVER_CURRENT;
else
mask = AD5421_FAULT_UNDER_CURRENT;
break;
case IIO_TEMP:
mask = AD5421_FAULT_TEMP_OVER_140;
break;
default:
return -EINVAL;
}
return (bool)(st->fault_mask & mask);
}
static int ad5421_read_event_value(struct iio_dev *indio_dev, u64 event_code,
int *val)
{
int ret;
switch (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code)) {
case IIO_CURRENT:
ret = ad5421_read(indio_dev, AD5421_REG_DAC_DATA);
if (ret < 0)
return ret;
*val = ret;
break;
case IIO_TEMP:
*val = 140000;
break;
default:
return -EINVAL;
}
return 0;
}
static const struct iio_info ad5421_info = {
.read_raw = ad5421_read_raw,
.write_raw = ad5421_write_raw,
.read_event_config = ad5421_read_event_config,
.write_event_config = ad5421_write_event_config,
.read_event_value = ad5421_read_event_value,
.driver_module = THIS_MODULE,
};
static int ad5421_probe(struct spi_device *spi)
{
struct ad5421_platform_data *pdata = dev_get_platdata(&spi->dev);
struct iio_dev *indio_dev;
struct ad5421_state *st;
int ret;
indio_dev = iio_device_alloc(sizeof(*st));
if (indio_dev == NULL) {
dev_err(&spi->dev, "Failed to allocate iio device\n");
return -ENOMEM;
}
st = iio_priv(indio_dev);
spi_set_drvdata(spi, indio_dev);
st->spi = spi;
indio_dev->dev.parent = &spi->dev;
indio_dev->name = "ad5421";
indio_dev->info = &ad5421_info;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = ad5421_channels;
indio_dev->num_channels = ARRAY_SIZE(ad5421_channels);
st->ctrl = AD5421_CTRL_WATCHDOG_DISABLE |
AD5421_CTRL_AUTO_FAULT_READBACK;
if (pdata) {
st->current_range = pdata->current_range;
if (pdata->external_vref)
st->ctrl |= AD5421_CTRL_PWR_DOWN_INT_VREF;
} else {
st->current_range = AD5421_CURRENT_RANGE_4mA_20mA;
}
/* write initial ctrl register value */
ad5421_update_ctrl(indio_dev, 0, 0);
if (spi->irq) {
ret = request_threaded_irq(spi->irq,
NULL,
ad5421_fault_handler,
IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
"ad5421 fault",
indio_dev);
if (ret)
goto error_free;
}
ret = iio_device_register(indio_dev);
if (ret) {
dev_err(&spi->dev, "Failed to register iio device: %d\n", ret);
goto error_free_irq;
}
return 0;
error_free_irq:
if (spi->irq)
free_irq(spi->irq, indio_dev);
error_free:
iio_device_free(indio_dev);
return ret;
}
static int ad5421_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
iio_device_unregister(indio_dev);
if (spi->irq)
free_irq(spi->irq, indio_dev);
iio_device_free(indio_dev);
return 0;
}
static struct spi_driver ad5421_driver = {
.driver = {
.name = "ad5421",
.owner = THIS_MODULE,
},
.probe = ad5421_probe,
.remove = ad5421_remove,
};
module_spi_driver(ad5421_driver);
MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
MODULE_DESCRIPTION("Analog Devices AD5421 DAC");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("spi:ad5421");
Reference in New Issue View Git Blame Copy Permalink