kernel-ark/drivers/pinctrl/pinctrl-exynos.c
Linus Torvalds 3dbde57ad9 Pin control changes for the v3.11 kernel cycle:
- A large slew of improvements of the Genric pin configuration
   support, and deployment in four different platforms:
   Rockchip, Super-H PFC, ABx500 and TZ1090. Support BIAS_BUS_HOLD,
   get device tree parsing and debugfs support into shape.
 
 - We also have device tree support with generic naming conventions
   for the generic pin configuration.
 
 - Delete the unused and confusing direct pinconf API. Now state
   transitions is *the* way to control pins and multiplexing.
 
 - New drivers for Rockchip, TZ1090, and TZ1090 PDC.
 
 - Two pin control states related to power management are now
   handled in the device core: "sleep" and "idle", removing a lot
   of boilerplate code in drivers. We do not yet know if this is
   the final word for pin PM, but it already make things a lot
   easier to handle.
 
 - Handle sparse GPIO ranges passing a list of disparate pins, and
   utilize these in the new BayTrail (x86 Atom SoC) driver.
 
 - Make the sunxi (AllWinner) driver handle external interrupts.
 
 - Make it possible for pinctrl-single to handle the case where
   several pins are managed by a single register, and augment it to
   handle sleep modes.
 
 - Cleanups and improvements for the abx500 drivers.
 
 - Move Sirf pin control drivers to their own directory, support
   save/restore of context and add support for the SiRFatlas6 SoC.
 
 - PMU muxing for the Dove pinctrl driver.
 
 - Finalization and support for VF610 in the i.MX6 pinctrl driver.
 
 - Smoothen out various Exynos rough edges.
 
 - Generic cleanups of various kinds.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJR0Z07AAoJEEEQszewGV1zx+oP/j+bh39e1Fc8ySFNvpwLFFRb
 EbQZx21XsK+d4fUVYQJ1IBh3e5FTqkmvHarbO1aNttqyk7eN5P4EFb3dLExIX+81
 6SJYtldH5ZdvLpJNvSXAX6fUjTD1CtBCDs5z5AvDQjqUArQ2tKlzJJgFXW8MSd3B
 5hd7XdU5g30GbVzFwrPbVUZwRM12YVs/HACkP6uFqDjB8KX6nXpETlqeeFW+ApvW
 RPT7iN/CsFls7gl6mHsPvScdfXar0ilZfu0hTf3EmhlVK1/iPOV6aqAF9z4j2Yxf
 ICL/x3phJ0Q7yNeZslif0KN3iJnrRGbdNvBi6wim35Ds5Uf3lY2SAhSvxNmkjT8n
 DB9oBTvQzr5OEv8fstWJAT+BWIdZ6Z91IqJ5Gy40A91oVUU9NDDBR3ur2gIneEUz
 51kOUhucCzpiht5A/7djAx6MYYOEUwjGNzjOs7tGcxCxz4+Rb2DbAXZ3Cew45ddh
 1QsfL3588A0DTp7ccw7f4QwYveX/cquzia/MD8AtdrUSYFEPfkexEo540/VqMl8j
 aMJ8Uuca9GSnyXDk+ziwkzLg2DjTw+p+6IygNr2GLrXFH2LTAKRpz/SidyLArDsw
 0sTFan0sdU3497rHX5Xc8yCyDY4sXCdQm3/er+TE+Z7V2dS99GuEysCAInIdvM1I
 Wupqaxw4A25YSmbRFVpR
 =EbAf
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-for-v3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control changes from Linus Walleij:

 - A large slew of improvements of the Genric pin configuration support,
   and deployment in four different platforms: Rockchip, Super-H PFC,
   ABx500 and TZ1090.  Support BIAS_BUS_HOLD, get device tree parsing
   and debugfs support into shape.

 - We also have device tree support with generic naming conventions for
   the generic pin configuration.

 - Delete the unused and confusing direct pinconf API.  Now state
   transitions is *the* way to control pins and multiplexing.

 - New drivers for Rockchip, TZ1090, and TZ1090 PDC.

 - Two pin control states related to power management are now handled in
   the device core: "sleep" and "idle", removing a lot of boilerplate
   code in drivers.  We do not yet know if this is the final word for
   pin PM, but it already make things a lot easier to handle.

 - Handle sparse GPIO ranges passing a list of disparate pins, and
   utilize these in the new BayTrail (x86 Atom SoC) driver.

 - Make the sunxi (AllWinner) driver handle external interrupts.

 - Make it possible for pinctrl-single to handle the case where several
   pins are managed by a single register, and augment it to handle sleep
   modes.

 - Cleanups and improvements for the abx500 drivers.

 - Move Sirf pin control drivers to their own directory, support
   save/restore of context and add support for the SiRFatlas6 SoC.

 - PMU muxing for the Dove pinctrl driver.

 - Finalization and support for VF610 in the i.MX6 pinctrl driver.

 - Smoothen out various Exynos rough edges.

 - Generic cleanups of various kinds.

* tag 'pinctrl-for-v3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits)
  pinctrl: vt8500: wmt: remove redundant dev_err call in wmt_pinctrl_probe()
  pinctrl: remove bindings for pinconf options needing more thought
  pinctrl: remove slew-rate parameter from tz1090
  pinctrl: set unit for debounce time pinconfig to usec
  pinctrl: more clarifications for generic pull configs
  pinctrl: rip out the direct pinconf API
  pinctrl-tz1090-pdc: add TZ1090 PDC pinctrl driver
  pinctrl-tz1090: add TZ1090 pinctrl driver
  pinctrl: samsung: Staticize drvdata_list
  pinctrl: rockchip: Add missing irq_gc_unlock() call before return error
  pinctrl: abx500: rework error path
  pinctrl: abx500: suppress hardcoded value
  pinctrl: abx500: factorize code
  pinctrl: abx500: fix abx500_gpio_get()
  pinctrl: abx500: fix abx500_pin_config_set()
  pinctrl: abx500: Add device tree support
  sh-pfc: Guard DT parsing with #ifdef CONFIG_OF
  pinctrl: add Intel BayTrail GPIO/pinctrl support
  pinctrl: fix pinconf_ops::pin_config_dbg_parse_modify kerneldoc
  pinctrl: Staticize local symbols
  ...

Conflicts:
	drivers/net/ethernet/ti/davinci_mdio.c
	drivers/pinctrl/Makefile
2013-07-03 11:48:03 -07:00

1104 lines
34 KiB
C

/*
* Exynos specific support for Samsung pinctrl/gpiolib driver with eint support.
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
* Copyright (c) 2012 Linaro Ltd
* http://www.linaro.org
*
* Author: Thomas Abraham <thomas.ab@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This file contains the Samsung Exynos specific information required by the
* the Samsung pinctrl/gpiolib driver. It also includes the implementation of
* external gpio and wakeup interrupt support.
*/
#include <linux/module.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/irqdomain.h>
#include <linux/irq.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/of_irq.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/err.h>
#include "pinctrl-samsung.h"
#include "pinctrl-exynos.h"
static struct samsung_pin_bank_type bank_type_off = {
.fld_width = { 4, 1, 2, 2, 2, 2, },
.reg_offset = { 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, },
};
static struct samsung_pin_bank_type bank_type_alive = {
.fld_width = { 4, 1, 2, 2, },
.reg_offset = { 0x00, 0x04, 0x08, 0x0c, },
};
/* list of external wakeup controllers supported */
static const struct of_device_id exynos_wkup_irq_ids[] = {
{ .compatible = "samsung,exynos4210-wakeup-eint", },
{ }
};
static void exynos_gpio_irq_mask(struct irq_data *irqd)
{
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
struct samsung_pinctrl_drv_data *d = bank->drvdata;
unsigned long reg_mask = d->ctrl->geint_mask + bank->eint_offset;
unsigned long mask;
unsigned long flags;
spin_lock_irqsave(&bank->slock, flags);
mask = readl(d->virt_base + reg_mask);
mask |= 1 << irqd->hwirq;
writel(mask, d->virt_base + reg_mask);
spin_unlock_irqrestore(&bank->slock, flags);
}
static void exynos_gpio_irq_ack(struct irq_data *irqd)
{
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
struct samsung_pinctrl_drv_data *d = bank->drvdata;
unsigned long reg_pend = d->ctrl->geint_pend + bank->eint_offset;
writel(1 << irqd->hwirq, d->virt_base + reg_pend);
}
static void exynos_gpio_irq_unmask(struct irq_data *irqd)
{
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
struct samsung_pinctrl_drv_data *d = bank->drvdata;
unsigned long reg_mask = d->ctrl->geint_mask + bank->eint_offset;
unsigned long mask;
unsigned long flags;
/*
* Ack level interrupts right before unmask
*
* If we don't do this we'll get a double-interrupt. Level triggered
* interrupts must not fire an interrupt if the level is not
* _currently_ active, even if it was active while the interrupt was
* masked.
*/
if (irqd_get_trigger_type(irqd) & IRQ_TYPE_LEVEL_MASK)
exynos_gpio_irq_ack(irqd);
spin_lock_irqsave(&bank->slock, flags);
mask = readl(d->virt_base + reg_mask);
mask &= ~(1 << irqd->hwirq);
writel(mask, d->virt_base + reg_mask);
spin_unlock_irqrestore(&bank->slock, flags);
}
static int exynos_gpio_irq_set_type(struct irq_data *irqd, unsigned int type)
{
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
struct samsung_pin_bank_type *bank_type = bank->type;
struct samsung_pinctrl_drv_data *d = bank->drvdata;
struct samsung_pin_ctrl *ctrl = d->ctrl;
unsigned int pin = irqd->hwirq;
unsigned int shift = EXYNOS_EINT_CON_LEN * pin;
unsigned int con, trig_type;
unsigned long reg_con = ctrl->geint_con + bank->eint_offset;
unsigned long flags;
unsigned int mask;
switch (type) {
case IRQ_TYPE_EDGE_RISING:
trig_type = EXYNOS_EINT_EDGE_RISING;
break;
case IRQ_TYPE_EDGE_FALLING:
trig_type = EXYNOS_EINT_EDGE_FALLING;
break;
case IRQ_TYPE_EDGE_BOTH:
trig_type = EXYNOS_EINT_EDGE_BOTH;
break;
case IRQ_TYPE_LEVEL_HIGH:
trig_type = EXYNOS_EINT_LEVEL_HIGH;
break;
case IRQ_TYPE_LEVEL_LOW:
trig_type = EXYNOS_EINT_LEVEL_LOW;
break;
default:
pr_err("unsupported external interrupt type\n");
return -EINVAL;
}
if (type & IRQ_TYPE_EDGE_BOTH)
__irq_set_handler_locked(irqd->irq, handle_edge_irq);
else
__irq_set_handler_locked(irqd->irq, handle_level_irq);
con = readl(d->virt_base + reg_con);
con &= ~(EXYNOS_EINT_CON_MASK << shift);
con |= trig_type << shift;
writel(con, d->virt_base + reg_con);
reg_con = bank->pctl_offset + bank_type->reg_offset[PINCFG_TYPE_FUNC];
shift = pin * bank_type->fld_width[PINCFG_TYPE_FUNC];
mask = (1 << bank_type->fld_width[PINCFG_TYPE_FUNC]) - 1;
spin_lock_irqsave(&bank->slock, flags);
con = readl(d->virt_base + reg_con);
con &= ~(mask << shift);
con |= EXYNOS_EINT_FUNC << shift;
writel(con, d->virt_base + reg_con);
spin_unlock_irqrestore(&bank->slock, flags);
return 0;
}
/*
* irq_chip for gpio interrupts.
*/
static struct irq_chip exynos_gpio_irq_chip = {
.name = "exynos_gpio_irq_chip",
.irq_unmask = exynos_gpio_irq_unmask,
.irq_mask = exynos_gpio_irq_mask,
.irq_ack = exynos_gpio_irq_ack,
.irq_set_type = exynos_gpio_irq_set_type,
};
static int exynos_gpio_irq_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
struct samsung_pin_bank *b = h->host_data;
irq_set_chip_data(virq, b);
irq_set_chip_and_handler(virq, &exynos_gpio_irq_chip,
handle_level_irq);
set_irq_flags(virq, IRQF_VALID);
return 0;
}
/*
* irq domain callbacks for external gpio interrupt controller.
*/
static const struct irq_domain_ops exynos_gpio_irqd_ops = {
.map = exynos_gpio_irq_map,
.xlate = irq_domain_xlate_twocell,
};
static irqreturn_t exynos_eint_gpio_irq(int irq, void *data)
{
struct samsung_pinctrl_drv_data *d = data;
struct samsung_pin_ctrl *ctrl = d->ctrl;
struct samsung_pin_bank *bank = ctrl->pin_banks;
unsigned int svc, group, pin, virq;
svc = readl(d->virt_base + ctrl->svc);
group = EXYNOS_SVC_GROUP(svc);
pin = svc & EXYNOS_SVC_NUM_MASK;
if (!group)
return IRQ_HANDLED;
bank += (group - 1);
virq = irq_linear_revmap(bank->irq_domain, pin);
if (!virq)
return IRQ_NONE;
generic_handle_irq(virq);
return IRQ_HANDLED;
}
struct exynos_eint_gpio_save {
u32 eint_con;
u32 eint_fltcon0;
u32 eint_fltcon1;
};
/*
* exynos_eint_gpio_init() - setup handling of external gpio interrupts.
* @d: driver data of samsung pinctrl driver.
*/
static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d)
{
struct samsung_pin_bank *bank;
struct device *dev = d->dev;
int ret;
int i;
if (!d->irq) {
dev_err(dev, "irq number not available\n");
return -EINVAL;
}
ret = devm_request_irq(dev, d->irq, exynos_eint_gpio_irq,
0, dev_name(dev), d);
if (ret) {
dev_err(dev, "irq request failed\n");
return -ENXIO;
}
bank = d->ctrl->pin_banks;
for (i = 0; i < d->ctrl->nr_banks; ++i, ++bank) {
if (bank->eint_type != EINT_TYPE_GPIO)
continue;
bank->irq_domain = irq_domain_add_linear(bank->of_node,
bank->nr_pins, &exynos_gpio_irqd_ops, bank);
if (!bank->irq_domain) {
dev_err(dev, "gpio irq domain add failed\n");
ret = -ENXIO;
goto err_domains;
}
bank->soc_priv = devm_kzalloc(d->dev,
sizeof(struct exynos_eint_gpio_save), GFP_KERNEL);
if (!bank->soc_priv) {
irq_domain_remove(bank->irq_domain);
ret = -ENOMEM;
goto err_domains;
}
}
return 0;
err_domains:
for (--i, --bank; i >= 0; --i, --bank) {
if (bank->eint_type != EINT_TYPE_GPIO)
continue;
irq_domain_remove(bank->irq_domain);
}
return ret;
}
static void exynos_wkup_irq_mask(struct irq_data *irqd)
{
struct samsung_pin_bank *b = irq_data_get_irq_chip_data(irqd);
struct samsung_pinctrl_drv_data *d = b->drvdata;
unsigned long reg_mask = d->ctrl->weint_mask + b->eint_offset;
unsigned long mask;
unsigned long flags;
spin_lock_irqsave(&b->slock, flags);
mask = readl(d->virt_base + reg_mask);
mask |= 1 << irqd->hwirq;
writel(mask, d->virt_base + reg_mask);
spin_unlock_irqrestore(&b->slock, flags);
}
static void exynos_wkup_irq_ack(struct irq_data *irqd)
{
struct samsung_pin_bank *b = irq_data_get_irq_chip_data(irqd);
struct samsung_pinctrl_drv_data *d = b->drvdata;
unsigned long pend = d->ctrl->weint_pend + b->eint_offset;
writel(1 << irqd->hwirq, d->virt_base + pend);
}
static void exynos_wkup_irq_unmask(struct irq_data *irqd)
{
struct samsung_pin_bank *b = irq_data_get_irq_chip_data(irqd);
struct samsung_pinctrl_drv_data *d = b->drvdata;
unsigned long reg_mask = d->ctrl->weint_mask + b->eint_offset;
unsigned long mask;
unsigned long flags;
/*
* Ack level interrupts right before unmask
*
* If we don't do this we'll get a double-interrupt. Level triggered
* interrupts must not fire an interrupt if the level is not
* _currently_ active, even if it was active while the interrupt was
* masked.
*/
if (irqd_get_trigger_type(irqd) & IRQ_TYPE_LEVEL_MASK)
exynos_wkup_irq_ack(irqd);
spin_lock_irqsave(&b->slock, flags);
mask = readl(d->virt_base + reg_mask);
mask &= ~(1 << irqd->hwirq);
writel(mask, d->virt_base + reg_mask);
spin_unlock_irqrestore(&b->slock, flags);
}
static int exynos_wkup_irq_set_type(struct irq_data *irqd, unsigned int type)
{
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
struct samsung_pin_bank_type *bank_type = bank->type;
struct samsung_pinctrl_drv_data *d = bank->drvdata;
unsigned int pin = irqd->hwirq;
unsigned long reg_con = d->ctrl->weint_con + bank->eint_offset;
unsigned long shift = EXYNOS_EINT_CON_LEN * pin;
unsigned long con, trig_type;
unsigned long flags;
unsigned int mask;
switch (type) {
case IRQ_TYPE_EDGE_RISING:
trig_type = EXYNOS_EINT_EDGE_RISING;
break;
case IRQ_TYPE_EDGE_FALLING:
trig_type = EXYNOS_EINT_EDGE_FALLING;
break;
case IRQ_TYPE_EDGE_BOTH:
trig_type = EXYNOS_EINT_EDGE_BOTH;
break;
case IRQ_TYPE_LEVEL_HIGH:
trig_type = EXYNOS_EINT_LEVEL_HIGH;
break;
case IRQ_TYPE_LEVEL_LOW:
trig_type = EXYNOS_EINT_LEVEL_LOW;
break;
default:
pr_err("unsupported external interrupt type\n");
return -EINVAL;
}
if (type & IRQ_TYPE_EDGE_BOTH)
__irq_set_handler_locked(irqd->irq, handle_edge_irq);
else
__irq_set_handler_locked(irqd->irq, handle_level_irq);
con = readl(d->virt_base + reg_con);
con &= ~(EXYNOS_EINT_CON_MASK << shift);
con |= trig_type << shift;
writel(con, d->virt_base + reg_con);
reg_con = bank->pctl_offset + bank_type->reg_offset[PINCFG_TYPE_FUNC];
shift = pin * bank_type->fld_width[PINCFG_TYPE_FUNC];
mask = (1 << bank_type->fld_width[PINCFG_TYPE_FUNC]) - 1;
spin_lock_irqsave(&bank->slock, flags);
con = readl(d->virt_base + reg_con);
con &= ~(mask << shift);
con |= EXYNOS_EINT_FUNC << shift;
writel(con, d->virt_base + reg_con);
spin_unlock_irqrestore(&bank->slock, flags);
return 0;
}
static u32 exynos_eint_wake_mask = 0xffffffff;
u32 exynos_get_eint_wake_mask(void)
{
return exynos_eint_wake_mask;
}
static int exynos_wkup_irq_set_wake(struct irq_data *irqd, unsigned int on)
{
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
unsigned long bit = 1UL << (2 * bank->eint_offset + irqd->hwirq);
pr_info("wake %s for irq %d\n", on ? "enabled" : "disabled", irqd->irq);
if (!on)
exynos_eint_wake_mask |= bit;
else
exynos_eint_wake_mask &= ~bit;
return 0;
}
/*
* irq_chip for wakeup interrupts
*/
static struct irq_chip exynos_wkup_irq_chip = {
.name = "exynos_wkup_irq_chip",
.irq_unmask = exynos_wkup_irq_unmask,
.irq_mask = exynos_wkup_irq_mask,
.irq_ack = exynos_wkup_irq_ack,
.irq_set_type = exynos_wkup_irq_set_type,
.irq_set_wake = exynos_wkup_irq_set_wake,
};
/* interrupt handler for wakeup interrupts 0..15 */
static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
{
struct exynos_weint_data *eintd = irq_get_handler_data(irq);
struct samsung_pin_bank *bank = eintd->bank;
struct irq_chip *chip = irq_get_chip(irq);
int eint_irq;
chained_irq_enter(chip, desc);
chip->irq_mask(&desc->irq_data);
if (chip->irq_ack)
chip->irq_ack(&desc->irq_data);
eint_irq = irq_linear_revmap(bank->irq_domain, eintd->irq);
generic_handle_irq(eint_irq);
chip->irq_unmask(&desc->irq_data);
chained_irq_exit(chip, desc);
}
static inline void exynos_irq_demux_eint(unsigned long pend,
struct irq_domain *domain)
{
unsigned int irq;
while (pend) {
irq = fls(pend) - 1;
generic_handle_irq(irq_find_mapping(domain, irq));
pend &= ~(1 << irq);
}
}
/* interrupt handler for wakeup interrupt 16 */
static void exynos_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
{
struct irq_chip *chip = irq_get_chip(irq);
struct exynos_muxed_weint_data *eintd = irq_get_handler_data(irq);
struct samsung_pinctrl_drv_data *d = eintd->banks[0]->drvdata;
struct samsung_pin_ctrl *ctrl = d->ctrl;
unsigned long pend;
unsigned long mask;
int i;
chained_irq_enter(chip, desc);
for (i = 0; i < eintd->nr_banks; ++i) {
struct samsung_pin_bank *b = eintd->banks[i];
pend = readl(d->virt_base + ctrl->weint_pend + b->eint_offset);
mask = readl(d->virt_base + ctrl->weint_mask + b->eint_offset);
exynos_irq_demux_eint(pend & ~mask, b->irq_domain);
}
chained_irq_exit(chip, desc);
}
static int exynos_wkup_irq_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
irq_set_chip_and_handler(virq, &exynos_wkup_irq_chip, handle_level_irq);
irq_set_chip_data(virq, h->host_data);
set_irq_flags(virq, IRQF_VALID);
return 0;
}
/*
* irq domain callbacks for external wakeup interrupt controller.
*/
static const struct irq_domain_ops exynos_wkup_irqd_ops = {
.map = exynos_wkup_irq_map,
.xlate = irq_domain_xlate_twocell,
};
/*
* exynos_eint_wkup_init() - setup handling of external wakeup interrupts.
* @d: driver data of samsung pinctrl driver.
*/
static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d)
{
struct device *dev = d->dev;
struct device_node *wkup_np = NULL;
struct device_node *np;
struct samsung_pin_bank *bank;
struct exynos_weint_data *weint_data;
struct exynos_muxed_weint_data *muxed_data;
unsigned int muxed_banks = 0;
unsigned int i;
int idx, irq;
for_each_child_of_node(dev->of_node, np) {
if (of_match_node(exynos_wkup_irq_ids, np)) {
wkup_np = np;
break;
}
}
if (!wkup_np)
return -ENODEV;
bank = d->ctrl->pin_banks;
for (i = 0; i < d->ctrl->nr_banks; ++i, ++bank) {
if (bank->eint_type != EINT_TYPE_WKUP)
continue;
bank->irq_domain = irq_domain_add_linear(bank->of_node,
bank->nr_pins, &exynos_wkup_irqd_ops, bank);
if (!bank->irq_domain) {
dev_err(dev, "wkup irq domain add failed\n");
return -ENXIO;
}
if (!of_find_property(bank->of_node, "interrupts", NULL)) {
bank->eint_type = EINT_TYPE_WKUP_MUX;
++muxed_banks;
continue;
}
weint_data = devm_kzalloc(dev, bank->nr_pins
* sizeof(*weint_data), GFP_KERNEL);
if (!weint_data) {
dev_err(dev, "could not allocate memory for weint_data\n");
return -ENOMEM;
}
for (idx = 0; idx < bank->nr_pins; ++idx) {
irq = irq_of_parse_and_map(bank->of_node, idx);
if (!irq) {
dev_err(dev, "irq number for eint-%s-%d not found\n",
bank->name, idx);
continue;
}
weint_data[idx].irq = idx;
weint_data[idx].bank = bank;
irq_set_handler_data(irq, &weint_data[idx]);
irq_set_chained_handler(irq, exynos_irq_eint0_15);
}
}
if (!muxed_banks)
return 0;
irq = irq_of_parse_and_map(wkup_np, 0);
if (!irq) {
dev_err(dev, "irq number for muxed EINTs not found\n");
return 0;
}
muxed_data = devm_kzalloc(dev, sizeof(*muxed_data)
+ muxed_banks*sizeof(struct samsung_pin_bank *), GFP_KERNEL);
if (!muxed_data) {
dev_err(dev, "could not allocate memory for muxed_data\n");
return -ENOMEM;
}
irq_set_chained_handler(irq, exynos_irq_demux_eint16_31);
irq_set_handler_data(irq, muxed_data);
bank = d->ctrl->pin_banks;
idx = 0;
for (i = 0; i < d->ctrl->nr_banks; ++i, ++bank) {
if (bank->eint_type != EINT_TYPE_WKUP_MUX)
continue;
muxed_data->banks[idx++] = bank;
}
muxed_data->nr_banks = muxed_banks;
return 0;
}
static void exynos_pinctrl_suspend_bank(
struct samsung_pinctrl_drv_data *drvdata,
struct samsung_pin_bank *bank)
{
struct exynos_eint_gpio_save *save = bank->soc_priv;
void __iomem *regs = drvdata->virt_base;
save->eint_con = readl(regs + EXYNOS_GPIO_ECON_OFFSET
+ bank->eint_offset);
save->eint_fltcon0 = readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET
+ 2 * bank->eint_offset);
save->eint_fltcon1 = readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET
+ 2 * bank->eint_offset + 4);
pr_debug("%s: save con %#010x\n", bank->name, save->eint_con);
pr_debug("%s: save fltcon0 %#010x\n", bank->name, save->eint_fltcon0);
pr_debug("%s: save fltcon1 %#010x\n", bank->name, save->eint_fltcon1);
}
static void exynos_pinctrl_suspend(struct samsung_pinctrl_drv_data *drvdata)
{
struct samsung_pin_ctrl *ctrl = drvdata->ctrl;
struct samsung_pin_bank *bank = ctrl->pin_banks;
int i;
for (i = 0; i < ctrl->nr_banks; ++i, ++bank)
if (bank->eint_type == EINT_TYPE_GPIO)
exynos_pinctrl_suspend_bank(drvdata, bank);
}
static void exynos_pinctrl_resume_bank(
struct samsung_pinctrl_drv_data *drvdata,
struct samsung_pin_bank *bank)
{
struct exynos_eint_gpio_save *save = bank->soc_priv;
void __iomem *regs = drvdata->virt_base;
pr_debug("%s: con %#010x => %#010x\n", bank->name,
readl(regs + EXYNOS_GPIO_ECON_OFFSET
+ bank->eint_offset), save->eint_con);
pr_debug("%s: fltcon0 %#010x => %#010x\n", bank->name,
readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET
+ 2 * bank->eint_offset), save->eint_fltcon0);
pr_debug("%s: fltcon1 %#010x => %#010x\n", bank->name,
readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET
+ 2 * bank->eint_offset + 4), save->eint_fltcon1);
writel(save->eint_con, regs + EXYNOS_GPIO_ECON_OFFSET
+ bank->eint_offset);
writel(save->eint_fltcon0, regs + EXYNOS_GPIO_EFLTCON_OFFSET
+ 2 * bank->eint_offset);
writel(save->eint_fltcon1, regs + EXYNOS_GPIO_EFLTCON_OFFSET
+ 2 * bank->eint_offset + 4);
}
static void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata)
{
struct samsung_pin_ctrl *ctrl = drvdata->ctrl;
struct samsung_pin_bank *bank = ctrl->pin_banks;
int i;
for (i = 0; i < ctrl->nr_banks; ++i, ++bank)
if (bank->eint_type == EINT_TYPE_GPIO)
exynos_pinctrl_resume_bank(drvdata, bank);
}
/* pin banks of exynos4210 pin-controller 0 */
static struct samsung_pin_bank exynos4210_pin_banks0[] = {
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04),
EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb", 0x08),
EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpc0", 0x0c),
EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpc1", 0x10),
EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpd0", 0x14),
EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpd1", 0x18),
EXYNOS_PIN_BANK_EINTG(5, 0x0E0, "gpe0", 0x1c),
EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpe1", 0x20),
EXYNOS_PIN_BANK_EINTG(6, 0x120, "gpe2", 0x24),
EXYNOS_PIN_BANK_EINTG(8, 0x140, "gpe3", 0x28),
EXYNOS_PIN_BANK_EINTG(8, 0x160, "gpe4", 0x2c),
EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpf0", 0x30),
EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpf1", 0x34),
EXYNOS_PIN_BANK_EINTG(8, 0x1C0, "gpf2", 0x38),
EXYNOS_PIN_BANK_EINTG(6, 0x1E0, "gpf3", 0x3c),
};
/* pin banks of exynos4210 pin-controller 1 */
static struct samsung_pin_bank exynos4210_pin_banks1[] = {
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpj0", 0x00),
EXYNOS_PIN_BANK_EINTG(5, 0x020, "gpj1", 0x04),
EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpk0", 0x08),
EXYNOS_PIN_BANK_EINTG(7, 0x060, "gpk1", 0x0c),
EXYNOS_PIN_BANK_EINTG(7, 0x080, "gpk2", 0x10),
EXYNOS_PIN_BANK_EINTG(7, 0x0A0, "gpk3", 0x14),
EXYNOS_PIN_BANK_EINTG(8, 0x0C0, "gpl0", 0x18),
EXYNOS_PIN_BANK_EINTG(3, 0x0E0, "gpl1", 0x1c),
EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpl2", 0x20),
EXYNOS_PIN_BANK_EINTN(6, 0x120, "gpy0"),
EXYNOS_PIN_BANK_EINTN(4, 0x140, "gpy1"),
EXYNOS_PIN_BANK_EINTN(6, 0x160, "gpy2"),
EXYNOS_PIN_BANK_EINTN(8, 0x180, "gpy3"),
EXYNOS_PIN_BANK_EINTN(8, 0x1A0, "gpy4"),
EXYNOS_PIN_BANK_EINTN(8, 0x1C0, "gpy5"),
EXYNOS_PIN_BANK_EINTN(8, 0x1E0, "gpy6"),
EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00),
EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04),
EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08),
EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c),
};
/* pin banks of exynos4210 pin-controller 2 */
static struct samsung_pin_bank exynos4210_pin_banks2[] = {
EXYNOS_PIN_BANK_EINTN(7, 0x000, "gpz"),
};
/*
* Samsung pinctrl driver data for Exynos4210 SoC. Exynos4210 SoC includes
* three gpio/pin-mux/pinconfig controllers.
*/
struct samsung_pin_ctrl exynos4210_pin_ctrl[] = {
{
/* pin-controller instance 0 data */
.pin_banks = exynos4210_pin_banks0,
.nr_banks = ARRAY_SIZE(exynos4210_pin_banks0),
.geint_con = EXYNOS_GPIO_ECON_OFFSET,
.geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.label = "exynos4210-gpio-ctrl0",
}, {
/* pin-controller instance 1 data */
.pin_banks = exynos4210_pin_banks1,
.nr_banks = ARRAY_SIZE(exynos4210_pin_banks1),
.geint_con = EXYNOS_GPIO_ECON_OFFSET,
.geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.weint_con = EXYNOS_WKUP_ECON_OFFSET,
.weint_mask = EXYNOS_WKUP_EMASK_OFFSET,
.weint_pend = EXYNOS_WKUP_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
.eint_wkup_init = exynos_eint_wkup_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.label = "exynos4210-gpio-ctrl1",
}, {
/* pin-controller instance 2 data */
.pin_banks = exynos4210_pin_banks2,
.nr_banks = ARRAY_SIZE(exynos4210_pin_banks2),
.label = "exynos4210-gpio-ctrl2",
},
};
/* pin banks of exynos4x12 pin-controller 0 */
static struct samsung_pin_bank exynos4x12_pin_banks0[] = {
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04),
EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb", 0x08),
EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpc0", 0x0c),
EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpc1", 0x10),
EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpd0", 0x14),
EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpd1", 0x18),
EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpf0", 0x30),
EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpf1", 0x34),
EXYNOS_PIN_BANK_EINTG(8, 0x1C0, "gpf2", 0x38),
EXYNOS_PIN_BANK_EINTG(6, 0x1E0, "gpf3", 0x3c),
EXYNOS_PIN_BANK_EINTG(8, 0x240, "gpj0", 0x40),
EXYNOS_PIN_BANK_EINTG(5, 0x260, "gpj1", 0x44),
};
/* pin banks of exynos4x12 pin-controller 1 */
static struct samsung_pin_bank exynos4x12_pin_banks1[] = {
EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpk0", 0x08),
EXYNOS_PIN_BANK_EINTG(7, 0x060, "gpk1", 0x0c),
EXYNOS_PIN_BANK_EINTG(7, 0x080, "gpk2", 0x10),
EXYNOS_PIN_BANK_EINTG(7, 0x0A0, "gpk3", 0x14),
EXYNOS_PIN_BANK_EINTG(7, 0x0C0, "gpl0", 0x18),
EXYNOS_PIN_BANK_EINTG(2, 0x0E0, "gpl1", 0x1c),
EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpl2", 0x20),
EXYNOS_PIN_BANK_EINTG(8, 0x260, "gpm0", 0x24),
EXYNOS_PIN_BANK_EINTG(7, 0x280, "gpm1", 0x28),
EXYNOS_PIN_BANK_EINTG(5, 0x2A0, "gpm2", 0x2c),
EXYNOS_PIN_BANK_EINTG(8, 0x2C0, "gpm3", 0x30),
EXYNOS_PIN_BANK_EINTG(8, 0x2E0, "gpm4", 0x34),
EXYNOS_PIN_BANK_EINTN(6, 0x120, "gpy0"),
EXYNOS_PIN_BANK_EINTN(4, 0x140, "gpy1"),
EXYNOS_PIN_BANK_EINTN(6, 0x160, "gpy2"),
EXYNOS_PIN_BANK_EINTN(8, 0x180, "gpy3"),
EXYNOS_PIN_BANK_EINTN(8, 0x1A0, "gpy4"),
EXYNOS_PIN_BANK_EINTN(8, 0x1C0, "gpy5"),
EXYNOS_PIN_BANK_EINTN(8, 0x1E0, "gpy6"),
EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00),
EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04),
EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08),
EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c),
};
/* pin banks of exynos4x12 pin-controller 2 */
static struct samsung_pin_bank exynos4x12_pin_banks2[] = {
EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz", 0x00),
};
/* pin banks of exynos4x12 pin-controller 3 */
static struct samsung_pin_bank exynos4x12_pin_banks3[] = {
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpv0", 0x00),
EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpv1", 0x04),
EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpv2", 0x08),
EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpv3", 0x0c),
EXYNOS_PIN_BANK_EINTG(2, 0x080, "gpv4", 0x10),
};
/*
* Samsung pinctrl driver data for Exynos4x12 SoC. Exynos4x12 SoC includes
* four gpio/pin-mux/pinconfig controllers.
*/
struct samsung_pin_ctrl exynos4x12_pin_ctrl[] = {
{
/* pin-controller instance 0 data */
.pin_banks = exynos4x12_pin_banks0,
.nr_banks = ARRAY_SIZE(exynos4x12_pin_banks0),
.geint_con = EXYNOS_GPIO_ECON_OFFSET,
.geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.label = "exynos4x12-gpio-ctrl0",
}, {
/* pin-controller instance 1 data */
.pin_banks = exynos4x12_pin_banks1,
.nr_banks = ARRAY_SIZE(exynos4x12_pin_banks1),
.geint_con = EXYNOS_GPIO_ECON_OFFSET,
.geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.weint_con = EXYNOS_WKUP_ECON_OFFSET,
.weint_mask = EXYNOS_WKUP_EMASK_OFFSET,
.weint_pend = EXYNOS_WKUP_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
.eint_wkup_init = exynos_eint_wkup_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.label = "exynos4x12-gpio-ctrl1",
}, {
/* pin-controller instance 2 data */
.pin_banks = exynos4x12_pin_banks2,
.nr_banks = ARRAY_SIZE(exynos4x12_pin_banks2),
.geint_con = EXYNOS_GPIO_ECON_OFFSET,
.geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.label = "exynos4x12-gpio-ctrl2",
}, {
/* pin-controller instance 3 data */
.pin_banks = exynos4x12_pin_banks3,
.nr_banks = ARRAY_SIZE(exynos4x12_pin_banks3),
.geint_con = EXYNOS_GPIO_ECON_OFFSET,
.geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.label = "exynos4x12-gpio-ctrl3",
},
};
/* pin banks of exynos5250 pin-controller 0 */
static struct samsung_pin_bank exynos5250_pin_banks0[] = {
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04),
EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpa2", 0x08),
EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpb0", 0x0c),
EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpb1", 0x10),
EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpb2", 0x14),
EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpb3", 0x18),
EXYNOS_PIN_BANK_EINTG(7, 0x0E0, "gpc0", 0x1c),
EXYNOS_PIN_BANK_EINTG(4, 0x100, "gpc1", 0x20),
EXYNOS_PIN_BANK_EINTG(7, 0x120, "gpc2", 0x24),
EXYNOS_PIN_BANK_EINTG(7, 0x140, "gpc3", 0x28),
EXYNOS_PIN_BANK_EINTG(4, 0x160, "gpd0", 0x2c),
EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpd1", 0x30),
EXYNOS_PIN_BANK_EINTG(7, 0x2E0, "gpc4", 0x34),
EXYNOS_PIN_BANK_EINTN(6, 0x1A0, "gpy0"),
EXYNOS_PIN_BANK_EINTN(4, 0x1C0, "gpy1"),
EXYNOS_PIN_BANK_EINTN(6, 0x1E0, "gpy2"),
EXYNOS_PIN_BANK_EINTN(8, 0x200, "gpy3"),
EXYNOS_PIN_BANK_EINTN(8, 0x220, "gpy4"),
EXYNOS_PIN_BANK_EINTN(8, 0x240, "gpy5"),
EXYNOS_PIN_BANK_EINTN(8, 0x260, "gpy6"),
EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00),
EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04),
EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08),
EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c),
};
/* pin banks of exynos5250 pin-controller 1 */
static struct samsung_pin_bank exynos5250_pin_banks1[] = {
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpe0", 0x00),
EXYNOS_PIN_BANK_EINTG(2, 0x020, "gpe1", 0x04),
EXYNOS_PIN_BANK_EINTG(4, 0x040, "gpf0", 0x08),
EXYNOS_PIN_BANK_EINTG(4, 0x060, "gpf1", 0x0c),
EXYNOS_PIN_BANK_EINTG(8, 0x080, "gpg0", 0x10),
EXYNOS_PIN_BANK_EINTG(8, 0x0A0, "gpg1", 0x14),
EXYNOS_PIN_BANK_EINTG(2, 0x0C0, "gpg2", 0x18),
EXYNOS_PIN_BANK_EINTG(4, 0x0E0, "gph0", 0x1c),
EXYNOS_PIN_BANK_EINTG(8, 0x100, "gph1", 0x20),
};
/* pin banks of exynos5250 pin-controller 2 */
static struct samsung_pin_bank exynos5250_pin_banks2[] = {
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpv0", 0x00),
EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpv1", 0x04),
EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpv2", 0x08),
EXYNOS_PIN_BANK_EINTG(8, 0x080, "gpv3", 0x0c),
EXYNOS_PIN_BANK_EINTG(2, 0x0C0, "gpv4", 0x10),
};
/* pin banks of exynos5250 pin-controller 3 */
static struct samsung_pin_bank exynos5250_pin_banks3[] = {
EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz", 0x00),
};
/*
* Samsung pinctrl driver data for Exynos5250 SoC. Exynos5250 SoC includes
* four gpio/pin-mux/pinconfig controllers.
*/
struct samsung_pin_ctrl exynos5250_pin_ctrl[] = {
{
/* pin-controller instance 0 data */
.pin_banks = exynos5250_pin_banks0,
.nr_banks = ARRAY_SIZE(exynos5250_pin_banks0),
.geint_con = EXYNOS_GPIO_ECON_OFFSET,
.geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.weint_con = EXYNOS_WKUP_ECON_OFFSET,
.weint_mask = EXYNOS_WKUP_EMASK_OFFSET,
.weint_pend = EXYNOS_WKUP_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
.eint_wkup_init = exynos_eint_wkup_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.label = "exynos5250-gpio-ctrl0",
}, {
/* pin-controller instance 1 data */
.pin_banks = exynos5250_pin_banks1,
.nr_banks = ARRAY_SIZE(exynos5250_pin_banks1),
.geint_con = EXYNOS_GPIO_ECON_OFFSET,
.geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.label = "exynos5250-gpio-ctrl1",
}, {
/* pin-controller instance 2 data */
.pin_banks = exynos5250_pin_banks2,
.nr_banks = ARRAY_SIZE(exynos5250_pin_banks2),
.geint_con = EXYNOS_GPIO_ECON_OFFSET,
.geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.label = "exynos5250-gpio-ctrl2",
}, {
/* pin-controller instance 3 data */
.pin_banks = exynos5250_pin_banks3,
.nr_banks = ARRAY_SIZE(exynos5250_pin_banks3),
.geint_con = EXYNOS_GPIO_ECON_OFFSET,
.geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.label = "exynos5250-gpio-ctrl3",
},
};
/* pin banks of exynos5420 pin-controller 0 */
static struct samsung_pin_bank exynos5420_pin_banks0[] = {
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpy7", 0x00),
EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00),
EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04),
EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08),
EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c),
};
/* pin banks of exynos5420 pin-controller 1 */
static struct samsung_pin_bank exynos5420_pin_banks1[] = {
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpc0", 0x00),
EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpc1", 0x04),
EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpc2", 0x08),
EXYNOS_PIN_BANK_EINTG(4, 0x060, "gpc3", 0x0c),
EXYNOS_PIN_BANK_EINTG(2, 0x080, "gpc4", 0x10),
EXYNOS_PIN_BANK_EINTG(8, 0x0A0, "gpd1", 0x14),
EXYNOS_PIN_BANK_EINTN(6, 0x0C0, "gpy0"),
EXYNOS_PIN_BANK_EINTN(4, 0x0E0, "gpy1"),
EXYNOS_PIN_BANK_EINTN(6, 0x100, "gpy2"),
EXYNOS_PIN_BANK_EINTN(8, 0x120, "gpy3"),
EXYNOS_PIN_BANK_EINTN(8, 0x140, "gpy4"),
EXYNOS_PIN_BANK_EINTN(8, 0x160, "gpy5"),
EXYNOS_PIN_BANK_EINTN(8, 0x180, "gpy6"),
};
/* pin banks of exynos5420 pin-controller 2 */
static struct samsung_pin_bank exynos5420_pin_banks2[] = {
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpe0", 0x00),
EXYNOS_PIN_BANK_EINTG(2, 0x020, "gpe1", 0x04),
EXYNOS_PIN_BANK_EINTG(6, 0x040, "gpf0", 0x08),
EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpf1", 0x0c),
EXYNOS_PIN_BANK_EINTG(8, 0x080, "gpg0", 0x10),
EXYNOS_PIN_BANK_EINTG(8, 0x0A0, "gpg1", 0x14),
EXYNOS_PIN_BANK_EINTG(2, 0x0C0, "gpg2", 0x18),
EXYNOS_PIN_BANK_EINTG(4, 0x0E0, "gpj4", 0x1c),
};
/* pin banks of exynos5420 pin-controller 3 */
static struct samsung_pin_bank exynos5420_pin_banks3[] = {
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04),
EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpa2", 0x08),
EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpb0", 0x0c),
EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpb1", 0x10),
EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpb2", 0x14),
EXYNOS_PIN_BANK_EINTG(8, 0x0C0, "gpb3", 0x18),
EXYNOS_PIN_BANK_EINTG(2, 0x0E0, "gpb4", 0x1c),
EXYNOS_PIN_BANK_EINTG(8, 0x100, "gph0", 0x20),
};
/* pin banks of exynos5420 pin-controller 4 */
static struct samsung_pin_bank exynos5420_pin_banks4[] = {
EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz", 0x00),
};
/*
* Samsung pinctrl driver data for Exynos5420 SoC. Exynos5420 SoC includes
* four gpio/pin-mux/pinconfig controllers.
*/
struct samsung_pin_ctrl exynos5420_pin_ctrl[] = {
{
/* pin-controller instance 0 data */
.pin_banks = exynos5420_pin_banks0,
.nr_banks = ARRAY_SIZE(exynos5420_pin_banks0),
.geint_con = EXYNOS_GPIO_ECON_OFFSET,
.geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.weint_con = EXYNOS_WKUP_ECON_OFFSET,
.weint_mask = EXYNOS_WKUP_EMASK_OFFSET,
.weint_pend = EXYNOS_WKUP_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
.eint_wkup_init = exynos_eint_wkup_init,
.label = "exynos5420-gpio-ctrl0",
}, {
/* pin-controller instance 1 data */
.pin_banks = exynos5420_pin_banks1,
.nr_banks = ARRAY_SIZE(exynos5420_pin_banks1),
.geint_con = EXYNOS_GPIO_ECON_OFFSET,
.geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
.label = "exynos5420-gpio-ctrl1",
}, {
/* pin-controller instance 2 data */
.pin_banks = exynos5420_pin_banks2,
.nr_banks = ARRAY_SIZE(exynos5420_pin_banks2),
.geint_con = EXYNOS_GPIO_ECON_OFFSET,
.geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
.label = "exynos5420-gpio-ctrl2",
}, {
/* pin-controller instance 3 data */
.pin_banks = exynos5420_pin_banks3,
.nr_banks = ARRAY_SIZE(exynos5420_pin_banks3),
.geint_con = EXYNOS_GPIO_ECON_OFFSET,
.geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
.label = "exynos5420-gpio-ctrl3",
}, {
/* pin-controller instance 4 data */
.pin_banks = exynos5420_pin_banks4,
.nr_banks = ARRAY_SIZE(exynos5420_pin_banks4),
.geint_con = EXYNOS_GPIO_ECON_OFFSET,
.geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
.label = "exynos5420-gpio-ctrl4",
},
};