kernel-ark/drivers/usb
Alan Cox d94c7bd4c1 tty: cp210x: Fix carrier handling
Original discussion:
http://thread.gmane.org/gmane.linux.usb.general/23217/focus=23248
or
http://marc.info/?l=linux-usb&m=125553790714133&w=2

9a68e39d4a broke carrier handling so that a
cp210x setup which needed the carrier lines set up (non CLOCAL) which did
not make a call which set the termios bits left the lines down even if
CLOCAL was not asserted.

Fix this not by reverting but by adding the proper dtr_rts and
carrier_raised methods. This both sets the modem lines properly and also
implements the correct blocking semantics for the port as required by
POSIX.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Reported-by: Karl Hiramoto <karl@hiramoto.org>
Tested-by:  Karl Hiramoto <karl@hiramoto.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-17 16:42:43 -08:00
..
atm firmware: atm/ueagle-atm: prepare for FIRMWARE_NAME_MAX removal 2009-06-15 21:30:24 -07:00
c67x00 usb/c67x00 endianness annotations 2008-06-04 08:06:01 -07:00
class USB: usbtmc: fix timeout increase 2009-10-09 13:52:06 -07:00
core USB: Add hub descriptor update hook for xHCI 2009-09-23 06:46:40 -07:00
early USB: ehci-dbgp: errata for EHCI debug/host controller synchronization 2009-09-23 06:46:38 -07:00
gadget USB: fsl_udc_core: Fix kernel oops on module removal 2009-10-30 14:57:33 -07:00
host USB: r8a66597-hcd: fix cannot detect a device when uses_new_polling is set 2009-10-30 14:57:33 -07:00
image USB: remove unneeded printks from microtek driver 2009-09-23 06:46:34 -07:00
misc USB: usblcd, fix memory leak 2009-10-09 13:52:06 -07:00
mon const: mark struct vm_struct_operations 2009-09-27 11:39:25 -07:00
musb USB: musb: invert arch depend string 2009-10-12 14:36:28 -07:00
otg USB: OMAP: ISP1301: Compile fix 2009-09-23 06:46:37 -07:00
serial tty: cp210x: Fix carrier handling 2009-11-17 16:42:43 -08:00
storage usb-storage: Workaround devices with bogus sense size 2009-10-14 14:54:44 -07:00
wusbcore USB: wusb: don't use the stack to read security descriptor 2009-10-14 14:54:42 -07:00
Kconfig Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze 2009-09-24 09:01:44 -07:00
Makefile USB: ehci,dbgp,early_printk: split ehci debug driver from early_printk.c 2009-09-23 06:46:38 -07:00
README
usb-skeleton.c USB: skeleton: fix coding style issues. 2009-09-23 06:46:40 -07:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.