kernel-ark/drivers/pcmcia/au1000_generic.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

549 lines
14 KiB
C

/*
*
* Alchemy Semi Au1000 pcmcia driver
*
* Copyright 2001-2003 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@embeddedalley.com or source@mvista.com
*
* Copyright 2004 Pete Popov, Embedded Alley Solutions, Inc.
* Updated the driver to 2.6. Followed the sa11xx API and largely
* copied many of the hardware independent functions.
*
* ########################################################################
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* ########################################################################
*
*
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/notifier.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/mach-au1x00/au1000.h>
#include "au1000_generic.h"
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Pete Popov <ppopov@embeddedalley.com>");
MODULE_DESCRIPTION("Linux PCMCIA Card Services: Au1x00 Socket Controller");
#if 0
#define debug(x,args...) printk(KERN_DEBUG "%s: " x, __func__ , ##args)
#else
#define debug(x,args...)
#endif
#define MAP_SIZE 0x100000
extern struct au1000_pcmcia_socket au1000_pcmcia_socket[];
#define PCMCIA_SOCKET(x) (au1000_pcmcia_socket + (x))
#define to_au1000_socket(x) container_of(x, struct au1000_pcmcia_socket, socket)
/* Some boards like to support CF cards as IDE root devices, so they
* grab pcmcia sockets directly.
*/
u32 *pcmcia_base_vaddrs[2];
extern const unsigned long mips_io_port_base;
static DEFINE_MUTEX(pcmcia_sockets_lock);
static int (*au1x00_pcmcia_hw_init[])(struct device *dev) = {
au1x_board_init,
};
static int
au1x00_pcmcia_skt_state(struct au1000_pcmcia_socket *skt)
{
struct pcmcia_state state;
unsigned int stat;
memset(&state, 0, sizeof(struct pcmcia_state));
skt->ops->socket_state(skt, &state);
stat = state.detect ? SS_DETECT : 0;
stat |= state.ready ? SS_READY : 0;
stat |= state.wrprot ? SS_WRPROT : 0;
stat |= state.vs_3v ? SS_3VCARD : 0;
stat |= state.vs_Xv ? SS_XVCARD : 0;
stat |= skt->cs_state.Vcc ? SS_POWERON : 0;
if (skt->cs_state.flags & SS_IOCARD)
stat |= state.bvd1 ? SS_STSCHG : 0;
else {
if (state.bvd1 == 0)
stat |= SS_BATDEAD;
else if (state.bvd2 == 0)
stat |= SS_BATWARN;
}
return stat;
}
/*
* au100_pcmcia_config_skt
*
* Convert PCMCIA socket state to our socket configure structure.
*/
static int
au1x00_pcmcia_config_skt(struct au1000_pcmcia_socket *skt, socket_state_t *state)
{
int ret;
ret = skt->ops->configure_socket(skt, state);
if (ret == 0) {
skt->cs_state = *state;
}
if (ret < 0)
debug("unable to configure socket %d\n", skt->nr);
return ret;
}
/* au1x00_pcmcia_sock_init()
*
* (Re-)Initialise the socket, turning on status interrupts
* and PCMCIA bus. This must wait for power to stabilise
* so that the card status signals report correctly.
*
* Returns: 0
*/
static int au1x00_pcmcia_sock_init(struct pcmcia_socket *sock)
{
struct au1000_pcmcia_socket *skt = to_au1000_socket(sock);
debug("initializing socket %u\n", skt->nr);
skt->ops->socket_init(skt);
return 0;
}
/*
* au1x00_pcmcia_suspend()
*
* Remove power on the socket, disable IRQs from the card.
* Turn off status interrupts, and disable the PCMCIA bus.
*
* Returns: 0
*/
static int au1x00_pcmcia_suspend(struct pcmcia_socket *sock)
{
struct au1000_pcmcia_socket *skt = to_au1000_socket(sock);
debug("suspending socket %u\n", skt->nr);
skt->ops->socket_suspend(skt);
return 0;
}
static DEFINE_SPINLOCK(status_lock);
/*
* au1x00_check_status()
*/
static void au1x00_check_status(struct au1000_pcmcia_socket *skt)
{
unsigned int events;
debug("entering PCMCIA monitoring thread\n");
do {
unsigned int status;
unsigned long flags;
status = au1x00_pcmcia_skt_state(skt);
spin_lock_irqsave(&status_lock, flags);
events = (status ^ skt->status) & skt->cs_state.csc_mask;
skt->status = status;
spin_unlock_irqrestore(&status_lock, flags);
debug("events: %s%s%s%s%s%s\n",
events == 0 ? "<NONE>" : "",
events & SS_DETECT ? "DETECT " : "",
events & SS_READY ? "READY " : "",
events & SS_BATDEAD ? "BATDEAD " : "",
events & SS_BATWARN ? "BATWARN " : "",
events & SS_STSCHG ? "STSCHG " : "");
if (events)
pcmcia_parse_events(&skt->socket, events);
} while (events);
}
/*
* au1x00_pcmcia_poll_event()
* Let's poll for events in addition to IRQs since IRQ only is unreliable...
*/
static void au1x00_pcmcia_poll_event(unsigned long dummy)
{
struct au1000_pcmcia_socket *skt = (struct au1000_pcmcia_socket *)dummy;
debug("polling for events\n");
mod_timer(&skt->poll_timer, jiffies + AU1000_PCMCIA_POLL_PERIOD);
au1x00_check_status(skt);
}
/* au1x00_pcmcia_get_status()
*
* From the sa11xx_core.c:
* Implements the get_status() operation for the in-kernel PCMCIA
* service (formerly SS_GetStatus in Card Services). Essentially just
* fills in bits in `status' according to internal driver state or
* the value of the voltage detect chipselect register.
*
* As a debugging note, during card startup, the PCMCIA core issues
* three set_socket() commands in a row the first with RESET deasserted,
* the second with RESET asserted, and the last with RESET deasserted
* again. Following the third set_socket(), a get_status() command will
* be issued. The kernel is looking for the SS_READY flag (see
* setup_socket(), reset_socket(), and unreset_socket() in cs.c).
*
* Returns: 0
*/
static int
au1x00_pcmcia_get_status(struct pcmcia_socket *sock, unsigned int *status)
{
struct au1000_pcmcia_socket *skt = to_au1000_socket(sock);
skt->status = au1x00_pcmcia_skt_state(skt);
*status = skt->status;
return 0;
}
/* au1x00_pcmcia_set_socket()
* Implements the set_socket() operation for the in-kernel PCMCIA
* service (formerly SS_SetSocket in Card Services). We more or
* less punt all of this work and let the kernel handle the details
* of power configuration, reset, &c. We also record the value of
* `state' in order to regurgitate it to the PCMCIA core later.
*
* Returns: 0
*/
static int
au1x00_pcmcia_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
{
struct au1000_pcmcia_socket *skt = to_au1000_socket(sock);
debug("for sock %u\n", skt->nr);
debug("\tmask: %s%s%s%s%s%s\n\tflags: %s%s%s%s%s%s\n",
(state->csc_mask==0)?"<NONE>":"",
(state->csc_mask&SS_DETECT)?"DETECT ":"",
(state->csc_mask&SS_READY)?"READY ":"",
(state->csc_mask&SS_BATDEAD)?"BATDEAD ":"",
(state->csc_mask&SS_BATWARN)?"BATWARN ":"",
(state->csc_mask&SS_STSCHG)?"STSCHG ":"",
(state->flags==0)?"<NONE>":"",
(state->flags&SS_PWR_AUTO)?"PWR_AUTO ":"",
(state->flags&SS_IOCARD)?"IOCARD ":"",
(state->flags&SS_RESET)?"RESET ":"",
(state->flags&SS_SPKR_ENA)?"SPKR_ENA ":"",
(state->flags&SS_OUTPUT_ENA)?"OUTPUT_ENA ":"");
debug("\tVcc %d Vpp %d irq %d\n",
state->Vcc, state->Vpp, state->io_irq);
return au1x00_pcmcia_config_skt(skt, state);
}
int
au1x00_pcmcia_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *map)
{
struct au1000_pcmcia_socket *skt = to_au1000_socket(sock);
unsigned int speed;
if(map->map>=MAX_IO_WIN){
debug("map (%d) out of range\n", map->map);
return -1;
}
if(map->flags&MAP_ACTIVE){
speed=(map->speed>0)?map->speed:AU1000_PCMCIA_IO_SPEED;
skt->spd_io[map->map] = speed;
}
map->start=(unsigned int)(u32)skt->virt_io;
map->stop=map->start+MAP_SIZE;
return 0;
} /* au1x00_pcmcia_set_io_map() */
static int
au1x00_pcmcia_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map)
{
struct au1000_pcmcia_socket *skt = to_au1000_socket(sock);
unsigned short speed = map->speed;
if(map->map>=MAX_WIN){
debug("map (%d) out of range\n", map->map);
return -1;
}
if (map->flags & MAP_ATTRIB) {
skt->spd_attr[map->map] = speed;
skt->spd_mem[map->map] = 0;
} else {
skt->spd_attr[map->map] = 0;
skt->spd_mem[map->map] = speed;
}
if (map->flags & MAP_ATTRIB) {
map->static_start = skt->phys_attr + map->card_start;
}
else {
map->static_start = skt->phys_mem + map->card_start;
}
debug("set_mem_map %d start %08lx card_start %08x\n",
map->map, map->static_start, map->card_start);
return 0;
} /* au1x00_pcmcia_set_mem_map() */
static struct pccard_operations au1x00_pcmcia_operations = {
.init = au1x00_pcmcia_sock_init,
.suspend = au1x00_pcmcia_suspend,
.get_status = au1x00_pcmcia_get_status,
.set_socket = au1x00_pcmcia_set_socket,
.set_io_map = au1x00_pcmcia_set_io_map,
.set_mem_map = au1x00_pcmcia_set_mem_map,
};
static const char *skt_names[] = {
"PCMCIA socket 0",
"PCMCIA socket 1",
};
struct skt_dev_info {
int nskt;
};
int au1x00_pcmcia_socket_probe(struct device *dev, struct pcmcia_low_level *ops, int first, int nr)
{
struct skt_dev_info *sinfo;
struct au1000_pcmcia_socket *skt;
int ret, i;
sinfo = kzalloc(sizeof(struct skt_dev_info), GFP_KERNEL);
if (!sinfo) {
ret = -ENOMEM;
goto out;
}
sinfo->nskt = nr;
/*
* Initialise the per-socket structure.
*/
for (i = 0; i < nr; i++) {
skt = PCMCIA_SOCKET(i);
memset(skt, 0, sizeof(*skt));
skt->socket.resource_ops = &pccard_static_ops;
skt->socket.ops = &au1x00_pcmcia_operations;
skt->socket.owner = ops->owner;
skt->socket.dev.parent = dev;
init_timer(&skt->poll_timer);
skt->poll_timer.function = au1x00_pcmcia_poll_event;
skt->poll_timer.data = (unsigned long)skt;
skt->poll_timer.expires = jiffies + AU1000_PCMCIA_POLL_PERIOD;
skt->nr = first + i;
skt->irq = 255;
skt->dev = dev;
skt->ops = ops;
skt->res_skt.name = skt_names[skt->nr];
skt->res_io.name = "io";
skt->res_io.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
skt->res_mem.name = "memory";
skt->res_mem.flags = IORESOURCE_MEM;
skt->res_attr.name = "attribute";
skt->res_attr.flags = IORESOURCE_MEM;
/*
* PCMCIA client drivers use the inb/outb macros to access the
* IO registers. Since mips_io_port_base is added to the
* access address of the mips implementation of inb/outb,
* we need to subtract it here because we want to access the
* I/O or MEM address directly, without going through this
* "mips_io_port_base" mechanism.
*/
if (i == 0) {
skt->virt_io = (void *)
(ioremap((phys_t)AU1X_SOCK0_IO, 0x1000) -
(u32)mips_io_port_base);
skt->phys_attr = AU1X_SOCK0_PHYS_ATTR;
skt->phys_mem = AU1X_SOCK0_PHYS_MEM;
}
else {
skt->virt_io = (void *)
(ioremap((phys_t)AU1X_SOCK1_IO, 0x1000) -
(u32)mips_io_port_base);
skt->phys_attr = AU1X_SOCK1_PHYS_ATTR;
skt->phys_mem = AU1X_SOCK1_PHYS_MEM;
}
pcmcia_base_vaddrs[i] = (u32 *)skt->virt_io;
ret = ops->hw_init(skt);
skt->socket.features = SS_CAP_STATIC_MAP|SS_CAP_PCCARD;
skt->socket.irq_mask = 0;
skt->socket.map_size = MAP_SIZE;
skt->socket.pci_irq = skt->irq;
skt->socket.io_offset = (unsigned long)skt->virt_io;
skt->status = au1x00_pcmcia_skt_state(skt);
ret = pcmcia_register_socket(&skt->socket);
if (ret)
goto out_err;
WARN_ON(skt->socket.sock != i);
add_timer(&skt->poll_timer);
}
dev_set_drvdata(dev, sinfo);
return 0;
out_err:
flush_scheduled_work();
ops->hw_shutdown(skt);
while (i-- > 0) {
skt = PCMCIA_SOCKET(i);
del_timer_sync(&skt->poll_timer);
pcmcia_unregister_socket(&skt->socket);
flush_scheduled_work();
if (i == 0) {
iounmap(skt->virt_io + (u32)mips_io_port_base);
skt->virt_io = NULL;
}
#ifndef CONFIG_MIPS_XXS1500
else {
iounmap(skt->virt_io + (u32)mips_io_port_base);
skt->virt_io = NULL;
}
#endif
ops->hw_shutdown(skt);
}
kfree(sinfo);
out:
return ret;
}
int au1x00_drv_pcmcia_remove(struct platform_device *dev)
{
struct skt_dev_info *sinfo = platform_get_drvdata(dev);
int i;
mutex_lock(&pcmcia_sockets_lock);
platform_set_drvdata(dev, NULL);
for (i = 0; i < sinfo->nskt; i++) {
struct au1000_pcmcia_socket *skt = PCMCIA_SOCKET(i);
del_timer_sync(&skt->poll_timer);
pcmcia_unregister_socket(&skt->socket);
flush_scheduled_work();
skt->ops->hw_shutdown(skt);
au1x00_pcmcia_config_skt(skt, &dead_socket);
iounmap(skt->virt_io + (u32)mips_io_port_base);
skt->virt_io = NULL;
}
kfree(sinfo);
mutex_unlock(&pcmcia_sockets_lock);
return 0;
}
/*
* PCMCIA "Driver" API
*/
static int au1x00_drv_pcmcia_probe(struct platform_device *dev)
{
int i, ret = -ENODEV;
mutex_lock(&pcmcia_sockets_lock);
for (i=0; i < ARRAY_SIZE(au1x00_pcmcia_hw_init); i++) {
ret = au1x00_pcmcia_hw_init[i](&dev->dev);
if (ret == 0)
break;
}
mutex_unlock(&pcmcia_sockets_lock);
return ret;
}
static struct platform_driver au1x00_pcmcia_driver = {
.driver = {
.name = "au1x00-pcmcia",
.owner = THIS_MODULE,
},
.probe = au1x00_drv_pcmcia_probe,
.remove = au1x00_drv_pcmcia_remove,
};
/* au1x00_pcmcia_init()
*
* This routine performs low-level PCMCIA initialization and then
* registers this socket driver with Card Services.
*
* Returns: 0 on success, -ve error code on failure
*/
static int __init au1x00_pcmcia_init(void)
{
int error = 0;
error = platform_driver_register(&au1x00_pcmcia_driver);
return error;
}
/* au1x00_pcmcia_exit()
* Invokes the low-level kernel service to free IRQs associated with this
* socket controller and reset GPIO edge detection.
*/
static void __exit au1x00_pcmcia_exit(void)
{
platform_driver_unregister(&au1x00_pcmcia_driver);
}
module_init(au1x00_pcmcia_init);
module_exit(au1x00_pcmcia_exit);