516a824222
SDIO Simplified Specification V2.00 states that it is strongly recommended that the host executes either a power reset or issues a CMD52 (I/O Reset) to re-initialize an I/O only card or the I/O portion of a combo card. Additionally, the CMD52 must be issued first because it cannot be issued after a CMD0. With this patch the Nintendo Wii SDIO-based WLAN card is detected after a system reset, without requiring a complete system powercycle. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
209 lines
4.4 KiB
C
209 lines
4.4 KiB
C
/*
|
|
* linux/drivers/mmc/sdio_ops.c
|
|
*
|
|
* Copyright 2006-2007 Pierre Ossman
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or (at
|
|
* your option) any later version.
|
|
*/
|
|
|
|
#include <linux/scatterlist.h>
|
|
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mmc/card.h>
|
|
#include <linux/mmc/mmc.h>
|
|
#include <linux/mmc/sdio.h>
|
|
|
|
#include "core.h"
|
|
#include "sdio_ops.h"
|
|
|
|
int mmc_send_io_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
|
|
{
|
|
struct mmc_command cmd;
|
|
int i, err = 0;
|
|
|
|
BUG_ON(!host);
|
|
|
|
memset(&cmd, 0, sizeof(struct mmc_command));
|
|
|
|
cmd.opcode = SD_IO_SEND_OP_COND;
|
|
cmd.arg = ocr;
|
|
cmd.flags = MMC_RSP_SPI_R4 | MMC_RSP_R4 | MMC_CMD_BCR;
|
|
|
|
for (i = 100; i; i--) {
|
|
err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
|
|
if (err)
|
|
break;
|
|
|
|
/* if we're just probing, do a single pass */
|
|
if (ocr == 0)
|
|
break;
|
|
|
|
/* otherwise wait until reset completes */
|
|
if (mmc_host_is_spi(host)) {
|
|
/*
|
|
* Both R1_SPI_IDLE and MMC_CARD_BUSY indicate
|
|
* an initialized card under SPI, but some cards
|
|
* (Marvell's) only behave when looking at this
|
|
* one.
|
|
*/
|
|
if (cmd.resp[1] & MMC_CARD_BUSY)
|
|
break;
|
|
} else {
|
|
if (cmd.resp[0] & MMC_CARD_BUSY)
|
|
break;
|
|
}
|
|
|
|
err = -ETIMEDOUT;
|
|
|
|
mmc_delay(10);
|
|
}
|
|
|
|
if (rocr)
|
|
*rocr = cmd.resp[mmc_host_is_spi(host) ? 1 : 0];
|
|
|
|
return err;
|
|
}
|
|
|
|
static int mmc_io_rw_direct_host(struct mmc_host *host, int write, unsigned fn,
|
|
unsigned addr, u8 in, u8 *out)
|
|
{
|
|
struct mmc_command cmd;
|
|
int err;
|
|
|
|
BUG_ON(!host);
|
|
BUG_ON(fn > 7);
|
|
|
|
/* sanity check */
|
|
if (addr & ~0x1FFFF)
|
|
return -EINVAL;
|
|
|
|
memset(&cmd, 0, sizeof(struct mmc_command));
|
|
|
|
cmd.opcode = SD_IO_RW_DIRECT;
|
|
cmd.arg = write ? 0x80000000 : 0x00000000;
|
|
cmd.arg |= fn << 28;
|
|
cmd.arg |= (write && out) ? 0x08000000 : 0x00000000;
|
|
cmd.arg |= addr << 9;
|
|
cmd.arg |= in;
|
|
cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_AC;
|
|
|
|
err = mmc_wait_for_cmd(host, &cmd, 0);
|
|
if (err)
|
|
return err;
|
|
|
|
if (mmc_host_is_spi(host)) {
|
|
/* host driver already reported errors */
|
|
} else {
|
|
if (cmd.resp[0] & R5_ERROR)
|
|
return -EIO;
|
|
if (cmd.resp[0] & R5_FUNCTION_NUMBER)
|
|
return -EINVAL;
|
|
if (cmd.resp[0] & R5_OUT_OF_RANGE)
|
|
return -ERANGE;
|
|
}
|
|
|
|
if (out) {
|
|
if (mmc_host_is_spi(host))
|
|
*out = (cmd.resp[0] >> 8) & 0xFF;
|
|
else
|
|
*out = cmd.resp[0] & 0xFF;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
|
|
unsigned addr, u8 in, u8 *out)
|
|
{
|
|
BUG_ON(!card);
|
|
return mmc_io_rw_direct_host(card->host, write, fn, addr, in, out);
|
|
}
|
|
|
|
int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
|
|
unsigned addr, int incr_addr, u8 *buf, unsigned blocks, unsigned blksz)
|
|
{
|
|
struct mmc_request mrq;
|
|
struct mmc_command cmd;
|
|
struct mmc_data data;
|
|
struct scatterlist sg;
|
|
|
|
BUG_ON(!card);
|
|
BUG_ON(fn > 7);
|
|
BUG_ON(blocks == 1 && blksz > 512);
|
|
WARN_ON(blocks == 0);
|
|
WARN_ON(blksz == 0);
|
|
|
|
/* sanity check */
|
|
if (addr & ~0x1FFFF)
|
|
return -EINVAL;
|
|
|
|
memset(&mrq, 0, sizeof(struct mmc_request));
|
|
memset(&cmd, 0, sizeof(struct mmc_command));
|
|
memset(&data, 0, sizeof(struct mmc_data));
|
|
|
|
mrq.cmd = &cmd;
|
|
mrq.data = &data;
|
|
|
|
cmd.opcode = SD_IO_RW_EXTENDED;
|
|
cmd.arg = write ? 0x80000000 : 0x00000000;
|
|
cmd.arg |= fn << 28;
|
|
cmd.arg |= incr_addr ? 0x04000000 : 0x00000000;
|
|
cmd.arg |= addr << 9;
|
|
if (blocks == 1 && blksz <= 512)
|
|
cmd.arg |= (blksz == 512) ? 0 : blksz; /* byte mode */
|
|
else
|
|
cmd.arg |= 0x08000000 | blocks; /* block mode */
|
|
cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_ADTC;
|
|
|
|
data.blksz = blksz;
|
|
data.blocks = blocks;
|
|
data.flags = write ? MMC_DATA_WRITE : MMC_DATA_READ;
|
|
data.sg = &sg;
|
|
data.sg_len = 1;
|
|
|
|
sg_init_one(&sg, buf, blksz * blocks);
|
|
|
|
mmc_set_data_timeout(&data, card);
|
|
|
|
mmc_wait_for_req(card->host, &mrq);
|
|
|
|
if (cmd.error)
|
|
return cmd.error;
|
|
if (data.error)
|
|
return data.error;
|
|
|
|
if (mmc_host_is_spi(card->host)) {
|
|
/* host driver already reported errors */
|
|
} else {
|
|
if (cmd.resp[0] & R5_ERROR)
|
|
return -EIO;
|
|
if (cmd.resp[0] & R5_FUNCTION_NUMBER)
|
|
return -EINVAL;
|
|
if (cmd.resp[0] & R5_OUT_OF_RANGE)
|
|
return -ERANGE;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int sdio_reset(struct mmc_host *host)
|
|
{
|
|
int ret;
|
|
u8 abort;
|
|
|
|
/* SDIO Simplified Specification V2.0, 4.4 Reset for SDIO */
|
|
|
|
ret = mmc_io_rw_direct_host(host, 0, 0, SDIO_CCCR_ABORT, 0, &abort);
|
|
if (ret)
|
|
abort = 0x08;
|
|
else
|
|
abort |= 0x08;
|
|
|
|
ret = mmc_io_rw_direct_host(host, 1, 0, SDIO_CCCR_ABORT, abort, NULL);
|
|
return ret;
|
|
}
|
|
|