kernel-ark/arch/x86/kernel/mpparse_64.c
Sam Ravnborg 87d7e98012 x86: fix section mismatch warning in acpi/boot.c
Fix following warning:
WARNING: arch/x86/kernel/built-in.o(.text+0x10ea0): Section mismatch: reference to .cpuinit.data:num_processors in 'acpi_unmap_lsapic'

The exported function acpi_unmap_lsapic() references
the variable num_processors that is annotated __cpuinitdata.

Remove the annotation of num_processors as we never know
when an exported function are called.
And drop the needless initialsation to 0.

Warning was seen on 64 bit but similar pattern were seen
in 32 bit - so fix it up there too.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:37 +01:00

868 lines
22 KiB
C

/*
* Intel Multiprocessor Specification 1.1 and 1.4
* compliant MP-table parsing routines.
*
* (c) 1995 Alan Cox, Building #3 <alan@redhat.com>
* (c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com>
*
* Fixes
* Erich Boleyn : MP v1.4 and additional changes.
* Alan Cox : Added EBDA scanning
* Ingo Molnar : various cleanups and rewrites
* Maciej W. Rozycki: Bits for default MP configurations
* Paul Diefenbaugh: Added full ACPI support
*/
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/bootmem.h>
#include <linux/kernel_stat.h>
#include <linux/mc146818rtc.h>
#include <linux/acpi.h>
#include <linux/module.h>
#include <asm/smp.h>
#include <asm/mtrr.h>
#include <asm/mpspec.h>
#include <asm/pgalloc.h>
#include <asm/io_apic.h>
#include <asm/proto.h>
#include <asm/acpi.h>
/* Have we found an MP table */
int smp_found_config;
/*
* Various Linux-internal data structures created from the
* MP-table.
*/
DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
int mp_bus_id_to_pci_bus [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 };
static int mp_current_pci_id = 0;
/* I/O APIC entries */
struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
/* # of MP IRQ source entries */
struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
/* MP IRQ source entries */
int mp_irq_entries;
int nr_ioapics;
unsigned long mp_lapic_addr = 0;
/* Processor that is doing the boot up */
unsigned int boot_cpu_id = -1U;
EXPORT_SYMBOL(boot_cpu_id);
/* Internal processor count */
unsigned int num_processors;
unsigned disabled_cpus __cpuinitdata;
/* Bitmask of physically existing CPUs */
physid_mask_t phys_cpu_present_map = PHYSID_MASK_NONE;
u16 x86_bios_cpu_apicid_init[NR_CPUS] __initdata
= { [0 ... NR_CPUS-1] = BAD_APICID };
void *x86_bios_cpu_apicid_early_ptr;
DEFINE_PER_CPU(u16, x86_bios_cpu_apicid) = BAD_APICID;
EXPORT_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
/*
* Intel MP BIOS table parsing routines:
*/
/*
* Checksum an MP configuration block.
*/
static int __init mpf_checksum(unsigned char *mp, int len)
{
int sum = 0;
while (len--)
sum += *mp++;
return sum & 0xFF;
}
static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
{
int cpu;
cpumask_t tmp_map;
char *bootup_cpu = "";
if (!(m->mpc_cpuflag & CPU_ENABLED)) {
disabled_cpus++;
return;
}
if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
bootup_cpu = " (Bootup-CPU)";
boot_cpu_id = m->mpc_apicid;
}
printk(KERN_INFO "Processor #%d%s\n", m->mpc_apicid, bootup_cpu);
if (num_processors >= NR_CPUS) {
printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
" Processor ignored.\n", NR_CPUS);
return;
}
num_processors++;
cpus_complement(tmp_map, cpu_present_map);
cpu = first_cpu(tmp_map);
physid_set(m->mpc_apicid, phys_cpu_present_map);
if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
/*
* x86_bios_cpu_apicid is required to have processors listed
* in same order as logical cpu numbers. Hence the first
* entry is BSP, and so on.
*/
cpu = 0;
}
/* are we being called early in kernel startup? */
if (x86_cpu_to_apicid_early_ptr) {
u16 *cpu_to_apicid = x86_cpu_to_apicid_early_ptr;
u16 *bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr;
cpu_to_apicid[cpu] = m->mpc_apicid;
bios_cpu_apicid[cpu] = m->mpc_apicid;
} else {
per_cpu(x86_cpu_to_apicid, cpu) = m->mpc_apicid;
per_cpu(x86_bios_cpu_apicid, cpu) = m->mpc_apicid;
}
cpu_set(cpu, cpu_possible_map);
cpu_set(cpu, cpu_present_map);
}
static void __init MP_bus_info (struct mpc_config_bus *m)
{
char str[7];
memcpy(str, m->mpc_bustype, 6);
str[6] = 0;
Dprintk("Bus #%d is %s\n", m->mpc_busid, str);
if (strncmp(str, "ISA", 3) == 0) {
set_bit(m->mpc_busid, mp_bus_not_pci);
} else if (strncmp(str, "PCI", 3) == 0) {
clear_bit(m->mpc_busid, mp_bus_not_pci);
mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id;
mp_current_pci_id++;
} else {
printk(KERN_ERR "Unknown bustype %s\n", str);
}
}
static int bad_ioapic(unsigned long address)
{
if (nr_ioapics >= MAX_IO_APICS) {
printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
"(found %d)\n", MAX_IO_APICS, nr_ioapics);
panic("Recompile kernel with bigger MAX_IO_APICS!\n");
}
if (!address) {
printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address"
" found in table, skipping!\n");
return 1;
}
return 0;
}
static void __init MP_ioapic_info (struct mpc_config_ioapic *m)
{
if (!(m->mpc_flags & MPC_APIC_USABLE))
return;
printk("I/O APIC #%d at 0x%X.\n",
m->mpc_apicid, m->mpc_apicaddr);
if (bad_ioapic(m->mpc_apicaddr))
return;
mp_ioapics[nr_ioapics] = *m;
nr_ioapics++;
}
static void __init MP_intsrc_info (struct mpc_config_intsrc *m)
{
mp_irqs [mp_irq_entries] = *m;
Dprintk("Int: type %d, pol %d, trig %d, bus %d,"
" IRQ %02x, APIC ID %x, APIC INT %02x\n",
m->mpc_irqtype, m->mpc_irqflag & 3,
(m->mpc_irqflag >> 2) & 3, m->mpc_srcbus,
m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq);
if (++mp_irq_entries >= MAX_IRQ_SOURCES)
panic("Max # of irq sources exceeded!!\n");
}
static void __init MP_lintsrc_info (struct mpc_config_lintsrc *m)
{
Dprintk("Lint: type %d, pol %d, trig %d, bus %d,"
" IRQ %02x, APIC ID %x, APIC LINT %02x\n",
m->mpc_irqtype, m->mpc_irqflag & 3,
(m->mpc_irqflag >> 2) &3, m->mpc_srcbusid,
m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint);
}
/*
* Read/parse the MPC
*/
static int __init smp_read_mpc(struct mp_config_table *mpc)
{
char str[16];
int count=sizeof(*mpc);
unsigned char *mpt=((unsigned char *)mpc)+count;
if (memcmp(mpc->mpc_signature,MPC_SIGNATURE,4)) {
printk("MPTABLE: bad signature [%c%c%c%c]!\n",
mpc->mpc_signature[0],
mpc->mpc_signature[1],
mpc->mpc_signature[2],
mpc->mpc_signature[3]);
return 0;
}
if (mpf_checksum((unsigned char *)mpc,mpc->mpc_length)) {
printk("MPTABLE: checksum error!\n");
return 0;
}
if (mpc->mpc_spec!=0x01 && mpc->mpc_spec!=0x04) {
printk(KERN_ERR "MPTABLE: bad table version (%d)!!\n",
mpc->mpc_spec);
return 0;
}
if (!mpc->mpc_lapic) {
printk(KERN_ERR "MPTABLE: null local APIC address!\n");
return 0;
}
memcpy(str,mpc->mpc_oem,8);
str[8] = 0;
printk(KERN_INFO "MPTABLE: OEM ID: %s ",str);
memcpy(str,mpc->mpc_productid,12);
str[12] = 0;
printk("MPTABLE: Product ID: %s ",str);
printk("MPTABLE: APIC at: 0x%X\n",mpc->mpc_lapic);
/* save the local APIC address, it might be non-default */
if (!acpi_lapic)
mp_lapic_addr = mpc->mpc_lapic;
/*
* Now process the configuration blocks.
*/
while (count < mpc->mpc_length) {
switch(*mpt) {
case MP_PROCESSOR:
{
struct mpc_config_processor *m=
(struct mpc_config_processor *)mpt;
if (!acpi_lapic)
MP_processor_info(m);
mpt += sizeof(*m);
count += sizeof(*m);
break;
}
case MP_BUS:
{
struct mpc_config_bus *m=
(struct mpc_config_bus *)mpt;
MP_bus_info(m);
mpt += sizeof(*m);
count += sizeof(*m);
break;
}
case MP_IOAPIC:
{
struct mpc_config_ioapic *m=
(struct mpc_config_ioapic *)mpt;
MP_ioapic_info(m);
mpt += sizeof(*m);
count += sizeof(*m);
break;
}
case MP_INTSRC:
{
struct mpc_config_intsrc *m=
(struct mpc_config_intsrc *)mpt;
MP_intsrc_info(m);
mpt += sizeof(*m);
count += sizeof(*m);
break;
}
case MP_LINTSRC:
{
struct mpc_config_lintsrc *m=
(struct mpc_config_lintsrc *)mpt;
MP_lintsrc_info(m);
mpt += sizeof(*m);
count += sizeof(*m);
break;
}
}
}
setup_apic_routing();
if (!num_processors)
printk(KERN_ERR "MPTABLE: no processors registered!\n");
return num_processors;
}
static int __init ELCR_trigger(unsigned int irq)
{
unsigned int port;
port = 0x4d0 + (irq >> 3);
return (inb(port) >> (irq & 7)) & 1;
}
static void __init construct_default_ioirq_mptable(int mpc_default_type)
{
struct mpc_config_intsrc intsrc;
int i;
int ELCR_fallback = 0;
intsrc.mpc_type = MP_INTSRC;
intsrc.mpc_irqflag = 0; /* conforming */
intsrc.mpc_srcbus = 0;
intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid;
intsrc.mpc_irqtype = mp_INT;
/*
* If true, we have an ISA/PCI system with no IRQ entries
* in the MP table. To prevent the PCI interrupts from being set up
* incorrectly, we try to use the ELCR. The sanity check to see if
* there is good ELCR data is very simple - IRQ0, 1, 2 and 13 can
* never be level sensitive, so we simply see if the ELCR agrees.
* If it does, we assume it's valid.
*/
if (mpc_default_type == 5) {
printk(KERN_INFO "ISA/PCI bus type with no IRQ information... falling back to ELCR\n");
if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) || ELCR_trigger(13))
printk(KERN_ERR "ELCR contains invalid data... not using ELCR\n");
else {
printk(KERN_INFO "Using ELCR to identify PCI interrupts\n");
ELCR_fallback = 1;
}
}
for (i = 0; i < 16; i++) {
switch (mpc_default_type) {
case 2:
if (i == 0 || i == 13)
continue; /* IRQ0 & IRQ13 not connected */
/* fall through */
default:
if (i == 2)
continue; /* IRQ2 is never connected */
}
if (ELCR_fallback) {
/*
* If the ELCR indicates a level-sensitive interrupt, we
* copy that information over to the MP table in the
* irqflag field (level sensitive, active high polarity).
*/
if (ELCR_trigger(i))
intsrc.mpc_irqflag = 13;
else
intsrc.mpc_irqflag = 0;
}
intsrc.mpc_srcbusirq = i;
intsrc.mpc_dstirq = i ? i : 2; /* IRQ0 to INTIN2 */
MP_intsrc_info(&intsrc);
}
intsrc.mpc_irqtype = mp_ExtINT;
intsrc.mpc_srcbusirq = 0;
intsrc.mpc_dstirq = 0; /* 8259A to INTIN0 */
MP_intsrc_info(&intsrc);
}
static inline void __init construct_default_ISA_mptable(int mpc_default_type)
{
struct mpc_config_processor processor;
struct mpc_config_bus bus;
struct mpc_config_ioapic ioapic;
struct mpc_config_lintsrc lintsrc;
int linttypes[2] = { mp_ExtINT, mp_NMI };
int i;
/*
* local APIC has default address
*/
mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
/*
* 2 CPUs, numbered 0 & 1.
*/
processor.mpc_type = MP_PROCESSOR;
processor.mpc_apicver = 0;
processor.mpc_cpuflag = CPU_ENABLED;
processor.mpc_cpufeature = 0;
processor.mpc_featureflag = 0;
processor.mpc_reserved[0] = 0;
processor.mpc_reserved[1] = 0;
for (i = 0; i < 2; i++) {
processor.mpc_apicid = i;
MP_processor_info(&processor);
}
bus.mpc_type = MP_BUS;
bus.mpc_busid = 0;
switch (mpc_default_type) {
default:
printk(KERN_ERR "???\nUnknown standard configuration %d\n",
mpc_default_type);
/* fall through */
case 1:
case 5:
memcpy(bus.mpc_bustype, "ISA ", 6);
break;
}
MP_bus_info(&bus);
if (mpc_default_type > 4) {
bus.mpc_busid = 1;
memcpy(bus.mpc_bustype, "PCI ", 6);
MP_bus_info(&bus);
}
ioapic.mpc_type = MP_IOAPIC;
ioapic.mpc_apicid = 2;
ioapic.mpc_apicver = 0;
ioapic.mpc_flags = MPC_APIC_USABLE;
ioapic.mpc_apicaddr = 0xFEC00000;
MP_ioapic_info(&ioapic);
/*
* We set up most of the low 16 IO-APIC pins according to MPS rules.
*/
construct_default_ioirq_mptable(mpc_default_type);
lintsrc.mpc_type = MP_LINTSRC;
lintsrc.mpc_irqflag = 0; /* conforming */
lintsrc.mpc_srcbusid = 0;
lintsrc.mpc_srcbusirq = 0;
lintsrc.mpc_destapic = MP_APIC_ALL;
for (i = 0; i < 2; i++) {
lintsrc.mpc_irqtype = linttypes[i];
lintsrc.mpc_destapiclint = i;
MP_lintsrc_info(&lintsrc);
}
}
static struct intel_mp_floating *mpf_found;
/*
* Scan the memory blocks for an SMP configuration block.
*/
void __init get_smp_config (void)
{
struct intel_mp_floating *mpf = mpf_found;
/*
* ACPI supports both logical (e.g. Hyper-Threading) and physical
* processors, where MPS only supports physical.
*/
if (acpi_lapic && acpi_ioapic) {
printk(KERN_INFO "Using ACPI (MADT) for SMP configuration information\n");
return;
}
else if (acpi_lapic)
printk(KERN_INFO "Using ACPI for processor (LAPIC) configuration information\n");
printk("Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification);
/*
* Now see if we need to read further.
*/
if (mpf->mpf_feature1 != 0) {
printk(KERN_INFO "Default MP configuration #%d\n", mpf->mpf_feature1);
construct_default_ISA_mptable(mpf->mpf_feature1);
} else if (mpf->mpf_physptr) {
/*
* Read the physical hardware table. Anything here will
* override the defaults.
*/
if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr))) {
smp_found_config = 0;
printk(KERN_ERR "BIOS bug, MP table errors detected!...\n");
printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n");
return;
}
/*
* If there are no explicit MP IRQ entries, then we are
* broken. We set up most of the low 16 IO-APIC pins to
* ISA defaults and hope it will work.
*/
if (!mp_irq_entries) {
struct mpc_config_bus bus;
printk(KERN_ERR "BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)\n");
bus.mpc_type = MP_BUS;
bus.mpc_busid = 0;
memcpy(bus.mpc_bustype, "ISA ", 6);
MP_bus_info(&bus);
construct_default_ioirq_mptable(0);
}
} else
BUG();
printk(KERN_INFO "Processors: %d\n", num_processors);
/*
* Only use the first configuration found.
*/
}
static int __init smp_scan_config (unsigned long base, unsigned long length)
{
extern void __bad_mpf_size(void);
unsigned int *bp = phys_to_virt(base);
struct intel_mp_floating *mpf;
Dprintk("Scan SMP from %p for %ld bytes.\n", bp,length);
if (sizeof(*mpf) != 16)
__bad_mpf_size();
while (length > 0) {
mpf = (struct intel_mp_floating *)bp;
if ((*bp == SMP_MAGIC_IDENT) &&
(mpf->mpf_length == 1) &&
!mpf_checksum((unsigned char *)bp, 16) &&
((mpf->mpf_specification == 1)
|| (mpf->mpf_specification == 4)) ) {
smp_found_config = 1;
reserve_bootmem_generic(virt_to_phys(mpf), PAGE_SIZE);
if (mpf->mpf_physptr)
reserve_bootmem_generic(mpf->mpf_physptr, PAGE_SIZE);
mpf_found = mpf;
return 1;
}
bp += 4;
length -= 16;
}
return 0;
}
void __init find_smp_config(void)
{
unsigned int address;
/*
* FIXME: Linux assumes you have 640K of base ram..
* this continues the error...
*
* 1) Scan the bottom 1K for a signature
* 2) Scan the top 1K of base RAM
* 3) Scan the 64K of bios
*/
if (smp_scan_config(0x0,0x400) ||
smp_scan_config(639*0x400,0x400) ||
smp_scan_config(0xF0000,0x10000))
return;
/*
* If it is an SMP machine we should know now.
*
* there is a real-mode segmented pointer pointing to the
* 4K EBDA area at 0x40E, calculate and scan it here.
*
* NOTE! There are Linux loaders that will corrupt the EBDA
* area, and as such this kind of SMP config may be less
* trustworthy, simply because the SMP table may have been
* stomped on during early boot. These loaders are buggy and
* should be fixed.
*/
address = *(unsigned short *)phys_to_virt(0x40E);
address <<= 4;
if (smp_scan_config(address, 0x1000))
return;
/* If we have come this far, we did not find an MP table */
printk(KERN_INFO "No mptable found.\n");
}
/* --------------------------------------------------------------------------
ACPI-based MP Configuration
-------------------------------------------------------------------------- */
#ifdef CONFIG_ACPI
void __init mp_register_lapic_address(u64 address)
{
mp_lapic_addr = (unsigned long) address;
set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr);
if (boot_cpu_id == -1U)
boot_cpu_id = GET_APIC_ID(apic_read(APIC_ID));
}
void __cpuinit mp_register_lapic (u8 id, u8 enabled)
{
struct mpc_config_processor processor;
int boot_cpu = 0;
if (id == boot_cpu_id)
boot_cpu = 1;
processor.mpc_type = MP_PROCESSOR;
processor.mpc_apicid = id;
processor.mpc_apicver = 0;
processor.mpc_cpuflag = (enabled ? CPU_ENABLED : 0);
processor.mpc_cpuflag |= (boot_cpu ? CPU_BOOTPROCESSOR : 0);
processor.mpc_cpufeature = 0;
processor.mpc_featureflag = 0;
processor.mpc_reserved[0] = 0;
processor.mpc_reserved[1] = 0;
MP_processor_info(&processor);
}
#define MP_ISA_BUS 0
#define MP_MAX_IOAPIC_PIN 127
static struct mp_ioapic_routing {
int apic_id;
int gsi_start;
int gsi_end;
u32 pin_programmed[4];
} mp_ioapic_routing[MAX_IO_APICS];
static int mp_find_ioapic(int gsi)
{
int i = 0;
/* Find the IOAPIC that manages this GSI. */
for (i = 0; i < nr_ioapics; i++) {
if ((gsi >= mp_ioapic_routing[i].gsi_start)
&& (gsi <= mp_ioapic_routing[i].gsi_end))
return i;
}
printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
return -1;
}
static u8 uniq_ioapic_id(u8 id)
{
int i;
DECLARE_BITMAP(used, 256);
bitmap_zero(used, 256);
for (i = 0; i < nr_ioapics; i++) {
struct mpc_config_ioapic *ia = &mp_ioapics[i];
__set_bit(ia->mpc_apicid, used);
}
if (!test_bit(id, used))
return id;
return find_first_zero_bit(used, 256);
}
void __init mp_register_ioapic(u8 id, u32 address, u32 gsi_base)
{
int idx = 0;
if (bad_ioapic(address))
return;
idx = nr_ioapics;
mp_ioapics[idx].mpc_type = MP_IOAPIC;
mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE;
mp_ioapics[idx].mpc_apicaddr = address;
set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
mp_ioapics[idx].mpc_apicid = uniq_ioapic_id(id);
mp_ioapics[idx].mpc_apicver = 0;
/*
* Build basic IRQ lookup table to facilitate gsi->io_apic lookups
* and to prevent reprogramming of IOAPIC pins (PCI IRQs).
*/
mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid;
mp_ioapic_routing[idx].gsi_start = gsi_base;
mp_ioapic_routing[idx].gsi_end = gsi_base +
io_apic_get_redir_entries(idx);
printk(KERN_INFO "IOAPIC[%d]: apic_id %d, address 0x%x, "
"GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid,
mp_ioapics[idx].mpc_apicaddr,
mp_ioapic_routing[idx].gsi_start,
mp_ioapic_routing[idx].gsi_end);
nr_ioapics++;
}
void __init
mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
{
struct mpc_config_intsrc intsrc;
int ioapic = -1;
int pin = -1;
/*
* Convert 'gsi' to 'ioapic.pin'.
*/
ioapic = mp_find_ioapic(gsi);
if (ioapic < 0)
return;
pin = gsi - mp_ioapic_routing[ioapic].gsi_start;
/*
* TBD: This check is for faulty timer entries, where the override
* erroneously sets the trigger to level, resulting in a HUGE
* increase of timer interrupts!
*/
if ((bus_irq == 0) && (trigger == 3))
trigger = 1;
intsrc.mpc_type = MP_INTSRC;
intsrc.mpc_irqtype = mp_INT;
intsrc.mpc_irqflag = (trigger << 2) | polarity;
intsrc.mpc_srcbus = MP_ISA_BUS;
intsrc.mpc_srcbusirq = bus_irq; /* IRQ */
intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; /* APIC ID */
intsrc.mpc_dstirq = pin; /* INTIN# */
Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, %d-%d\n",
intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
(intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, intsrc.mpc_dstirq);
mp_irqs[mp_irq_entries] = intsrc;
if (++mp_irq_entries == MAX_IRQ_SOURCES)
panic("Max # of irq sources exceeded!\n");
}
void __init mp_config_acpi_legacy_irqs(void)
{
struct mpc_config_intsrc intsrc;
int i = 0;
int ioapic = -1;
/*
* Fabricate the legacy ISA bus (bus #31).
*/
set_bit(MP_ISA_BUS, mp_bus_not_pci);
/*
* Locate the IOAPIC that manages the ISA IRQs (0-15).
*/
ioapic = mp_find_ioapic(0);
if (ioapic < 0)
return;
intsrc.mpc_type = MP_INTSRC;
intsrc.mpc_irqflag = 0; /* Conforming */
intsrc.mpc_srcbus = MP_ISA_BUS;
intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid;
/*
* Use the default configuration for the IRQs 0-15. Unless
* overridden by (MADT) interrupt source override entries.
*/
for (i = 0; i < 16; i++) {
int idx;
for (idx = 0; idx < mp_irq_entries; idx++) {
struct mpc_config_intsrc *irq = mp_irqs + idx;
/* Do we already have a mapping for this ISA IRQ? */
if (irq->mpc_srcbus == MP_ISA_BUS && irq->mpc_srcbusirq == i)
break;
/* Do we already have a mapping for this IOAPIC pin */
if ((irq->mpc_dstapic == intsrc.mpc_dstapic) &&
(irq->mpc_dstirq == i))
break;
}
if (idx != mp_irq_entries) {
printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i);
continue; /* IRQ already used */
}
intsrc.mpc_irqtype = mp_INT;
intsrc.mpc_srcbusirq = i; /* Identity mapped */
intsrc.mpc_dstirq = i;
Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, "
"%d-%d\n", intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
(intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
intsrc.mpc_srcbusirq, intsrc.mpc_dstapic,
intsrc.mpc_dstirq);
mp_irqs[mp_irq_entries] = intsrc;
if (++mp_irq_entries == MAX_IRQ_SOURCES)
panic("Max # of irq sources exceeded!\n");
}
}
int mp_register_gsi(u32 gsi, int triggering, int polarity)
{
int ioapic = -1;
int ioapic_pin = 0;
int idx, bit = 0;
if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
return gsi;
/* Don't set up the ACPI SCI because it's already set up */
if (acpi_gbl_FADT.sci_interrupt == gsi)
return gsi;
ioapic = mp_find_ioapic(gsi);
if (ioapic < 0) {
printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi);
return gsi;
}
ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_start;
/*
* Avoid pin reprogramming. PRTs typically include entries
* with redundant pin->gsi mappings (but unique PCI devices);
* we only program the IOAPIC on the first.
*/
bit = ioapic_pin % 32;
idx = (ioapic_pin < 32) ? 0 : (ioapic_pin / 32);
if (idx > 3) {
printk(KERN_ERR "Invalid reference to IOAPIC pin "
"%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
ioapic_pin);
return gsi;
}
if ((1<<bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) {
Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
return gsi;
}
mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1<<bit);
io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
return gsi;
}
#endif /*CONFIG_ACPI*/