kernel-ark/drivers/net/wireless/ieee802_11.h
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

79 lines
2.4 KiB
C

#ifndef _IEEE802_11_H
#define _IEEE802_11_H
#define IEEE802_11_DATA_LEN 2304
/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
6.2.1.1.2.
The figure in section 7.1.2 suggests a body size of up to 2312
bytes is allowed, which is a bit confusing, I suspect this
represents the 2304 bytes of real data, plus a possible 8 bytes of
WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
#define IEEE802_11_HLEN 30
#define IEEE802_11_FRAME_LEN (IEEE802_11_DATA_LEN + IEEE802_11_HLEN)
struct ieee802_11_hdr {
u16 frame_ctl;
u16 duration_id;
u8 addr1[ETH_ALEN];
u8 addr2[ETH_ALEN];
u8 addr3[ETH_ALEN];
u16 seq_ctl;
u8 addr4[ETH_ALEN];
} __attribute__ ((packed));
/* Frame control field constants */
#define IEEE802_11_FCTL_VERS 0x0002
#define IEEE802_11_FCTL_FTYPE 0x000c
#define IEEE802_11_FCTL_STYPE 0x00f0
#define IEEE802_11_FCTL_TODS 0x0100
#define IEEE802_11_FCTL_FROMDS 0x0200
#define IEEE802_11_FCTL_MOREFRAGS 0x0400
#define IEEE802_11_FCTL_RETRY 0x0800
#define IEEE802_11_FCTL_PM 0x1000
#define IEEE802_11_FCTL_MOREDATA 0x2000
#define IEEE802_11_FCTL_WEP 0x4000
#define IEEE802_11_FCTL_ORDER 0x8000
#define IEEE802_11_FTYPE_MGMT 0x0000
#define IEEE802_11_FTYPE_CTL 0x0004
#define IEEE802_11_FTYPE_DATA 0x0008
/* management */
#define IEEE802_11_STYPE_ASSOC_REQ 0x0000
#define IEEE802_11_STYPE_ASSOC_RESP 0x0010
#define IEEE802_11_STYPE_REASSOC_REQ 0x0020
#define IEEE802_11_STYPE_REASSOC_RESP 0x0030
#define IEEE802_11_STYPE_PROBE_REQ 0x0040
#define IEEE802_11_STYPE_PROBE_RESP 0x0050
#define IEEE802_11_STYPE_BEACON 0x0080
#define IEEE802_11_STYPE_ATIM 0x0090
#define IEEE802_11_STYPE_DISASSOC 0x00A0
#define IEEE802_11_STYPE_AUTH 0x00B0
#define IEEE802_11_STYPE_DEAUTH 0x00C0
/* control */
#define IEEE802_11_STYPE_PSPOLL 0x00A0
#define IEEE802_11_STYPE_RTS 0x00B0
#define IEEE802_11_STYPE_CTS 0x00C0
#define IEEE802_11_STYPE_ACK 0x00D0
#define IEEE802_11_STYPE_CFEND 0x00E0
#define IEEE802_11_STYPE_CFENDACK 0x00F0
/* data */
#define IEEE802_11_STYPE_DATA 0x0000
#define IEEE802_11_STYPE_DATA_CFACK 0x0010
#define IEEE802_11_STYPE_DATA_CFPOLL 0x0020
#define IEEE802_11_STYPE_DATA_CFACKPOLL 0x0030
#define IEEE802_11_STYPE_NULLFUNC 0x0040
#define IEEE802_11_STYPE_CFACK 0x0050
#define IEEE802_11_STYPE_CFPOLL 0x0060
#define IEEE802_11_STYPE_CFACKPOLL 0x0070
#define IEEE802_11_SCTL_FRAG 0x000F
#define IEEE802_11_SCTL_SEQ 0xFFF0
#endif /* _IEEE802_11_H */