1ff219068c
If the allocations fail in either dwmac1000_setup() or dwmac100_setup() then return NULL. These are called from stmmac_mac_device_setup(). The check for NULL returns in stmmac_mac_device_setup() needed to be moved forward a couple lines. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
199 lines
6.5 KiB
C
199 lines
6.5 KiB
C
/*******************************************************************************
|
|
This is the driver for the MAC 10/100 on-chip Ethernet controller
|
|
currently tested on all the ST boards based on STb7109 and stx7200 SoCs.
|
|
|
|
DWC Ether MAC 10/100 Universal version 4.0 has been used for developing
|
|
this code.
|
|
|
|
This only implements the mac core functions for this chip.
|
|
|
|
Copyright (C) 2007-2009 STMicroelectronics Ltd
|
|
|
|
This program is free software; you can redistribute it and/or modify it
|
|
under the terms and conditions of the GNU General Public License,
|
|
version 2, as published by the Free Software Foundation.
|
|
|
|
This program is distributed in the hope it will be useful, but WITHOUT
|
|
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
more details.
|
|
|
|
You should have received a copy of the GNU General Public License along with
|
|
this program; if not, write to the Free Software Foundation, Inc.,
|
|
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
|
|
|
|
The full GNU General Public License is included in this distribution in
|
|
the file called "COPYING".
|
|
|
|
Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
|
|
*******************************************************************************/
|
|
|
|
#include <linux/crc32.h>
|
|
#include "dwmac100.h"
|
|
|
|
static void dwmac100_core_init(unsigned long ioaddr)
|
|
{
|
|
u32 value = readl(ioaddr + MAC_CONTROL);
|
|
|
|
writel((value | MAC_CORE_INIT), ioaddr + MAC_CONTROL);
|
|
|
|
#ifdef STMMAC_VLAN_TAG_USED
|
|
writel(ETH_P_8021Q, ioaddr + MAC_VLAN1);
|
|
#endif
|
|
}
|
|
|
|
static void dwmac100_dump_mac_regs(unsigned long ioaddr)
|
|
{
|
|
pr_info("\t----------------------------------------------\n"
|
|
"\t DWMAC 100 CSR (base addr = 0x%8x)\n"
|
|
"\t----------------------------------------------\n",
|
|
(unsigned int)ioaddr);
|
|
pr_info("\tcontrol reg (offset 0x%x): 0x%08x\n", MAC_CONTROL,
|
|
readl(ioaddr + MAC_CONTROL));
|
|
pr_info("\taddr HI (offset 0x%x): 0x%08x\n ", MAC_ADDR_HIGH,
|
|
readl(ioaddr + MAC_ADDR_HIGH));
|
|
pr_info("\taddr LO (offset 0x%x): 0x%08x\n", MAC_ADDR_LOW,
|
|
readl(ioaddr + MAC_ADDR_LOW));
|
|
pr_info("\tmulticast hash HI (offset 0x%x): 0x%08x\n",
|
|
MAC_HASH_HIGH, readl(ioaddr + MAC_HASH_HIGH));
|
|
pr_info("\tmulticast hash LO (offset 0x%x): 0x%08x\n",
|
|
MAC_HASH_LOW, readl(ioaddr + MAC_HASH_LOW));
|
|
pr_info("\tflow control (offset 0x%x): 0x%08x\n",
|
|
MAC_FLOW_CTRL, readl(ioaddr + MAC_FLOW_CTRL));
|
|
pr_info("\tVLAN1 tag (offset 0x%x): 0x%08x\n", MAC_VLAN1,
|
|
readl(ioaddr + MAC_VLAN1));
|
|
pr_info("\tVLAN2 tag (offset 0x%x): 0x%08x\n", MAC_VLAN2,
|
|
readl(ioaddr + MAC_VLAN2));
|
|
pr_info("\n\tMAC management counter registers\n");
|
|
pr_info("\t MMC crtl (offset 0x%x): 0x%08x\n",
|
|
MMC_CONTROL, readl(ioaddr + MMC_CONTROL));
|
|
pr_info("\t MMC High Interrupt (offset 0x%x): 0x%08x\n",
|
|
MMC_HIGH_INTR, readl(ioaddr + MMC_HIGH_INTR));
|
|
pr_info("\t MMC Low Interrupt (offset 0x%x): 0x%08x\n",
|
|
MMC_LOW_INTR, readl(ioaddr + MMC_LOW_INTR));
|
|
pr_info("\t MMC High Interrupt Mask (offset 0x%x): 0x%08x\n",
|
|
MMC_HIGH_INTR_MASK, readl(ioaddr + MMC_HIGH_INTR_MASK));
|
|
pr_info("\t MMC Low Interrupt Mask (offset 0x%x): 0x%08x\n",
|
|
MMC_LOW_INTR_MASK, readl(ioaddr + MMC_LOW_INTR_MASK));
|
|
}
|
|
|
|
static void dwmac100_irq_status(unsigned long ioaddr)
|
|
{
|
|
return;
|
|
}
|
|
|
|
static void dwmac100_set_umac_addr(unsigned long ioaddr, unsigned char *addr,
|
|
unsigned int reg_n)
|
|
{
|
|
stmmac_set_mac_addr(ioaddr, addr, MAC_ADDR_HIGH, MAC_ADDR_LOW);
|
|
}
|
|
|
|
static void dwmac100_get_umac_addr(unsigned long ioaddr, unsigned char *addr,
|
|
unsigned int reg_n)
|
|
{
|
|
stmmac_get_mac_addr(ioaddr, addr, MAC_ADDR_HIGH, MAC_ADDR_LOW);
|
|
}
|
|
|
|
static void dwmac100_set_filter(struct net_device *dev)
|
|
{
|
|
unsigned long ioaddr = dev->base_addr;
|
|
u32 value = readl(ioaddr + MAC_CONTROL);
|
|
|
|
if (dev->flags & IFF_PROMISC) {
|
|
value |= MAC_CONTROL_PR;
|
|
value &= ~(MAC_CONTROL_PM | MAC_CONTROL_IF | MAC_CONTROL_HO |
|
|
MAC_CONTROL_HP);
|
|
} else if ((netdev_mc_count(dev) > HASH_TABLE_SIZE)
|
|
|| (dev->flags & IFF_ALLMULTI)) {
|
|
value |= MAC_CONTROL_PM;
|
|
value &= ~(MAC_CONTROL_PR | MAC_CONTROL_IF | MAC_CONTROL_HO);
|
|
writel(0xffffffff, ioaddr + MAC_HASH_HIGH);
|
|
writel(0xffffffff, ioaddr + MAC_HASH_LOW);
|
|
} else if (netdev_mc_empty(dev)) { /* no multicast */
|
|
value &= ~(MAC_CONTROL_PM | MAC_CONTROL_PR | MAC_CONTROL_IF |
|
|
MAC_CONTROL_HO | MAC_CONTROL_HP);
|
|
} else {
|
|
u32 mc_filter[2];
|
|
struct netdev_hw_addr *ha;
|
|
|
|
/* Perfect filter mode for physical address and Hash
|
|
filter for multicast */
|
|
value |= MAC_CONTROL_HP;
|
|
value &= ~(MAC_CONTROL_PM | MAC_CONTROL_PR |
|
|
MAC_CONTROL_IF | MAC_CONTROL_HO);
|
|
|
|
memset(mc_filter, 0, sizeof(mc_filter));
|
|
netdev_for_each_mc_addr(ha, dev) {
|
|
/* The upper 6 bits of the calculated CRC are used to
|
|
* index the contens of the hash table */
|
|
int bit_nr =
|
|
ether_crc(ETH_ALEN, ha->addr) >> 26;
|
|
/* The most significant bit determines the register to
|
|
* use (H/L) while the other 5 bits determine the bit
|
|
* within the register. */
|
|
mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
|
|
}
|
|
writel(mc_filter[0], ioaddr + MAC_HASH_LOW);
|
|
writel(mc_filter[1], ioaddr + MAC_HASH_HIGH);
|
|
}
|
|
|
|
writel(value, ioaddr + MAC_CONTROL);
|
|
|
|
CHIP_DBG(KERN_INFO "%s: CTRL reg: 0x%08x Hash regs: "
|
|
"HI 0x%08x, LO 0x%08x\n",
|
|
__func__, readl(ioaddr + MAC_CONTROL),
|
|
readl(ioaddr + MAC_HASH_HIGH), readl(ioaddr + MAC_HASH_LOW));
|
|
}
|
|
|
|
static void dwmac100_flow_ctrl(unsigned long ioaddr, unsigned int duplex,
|
|
unsigned int fc, unsigned int pause_time)
|
|
{
|
|
unsigned int flow = MAC_FLOW_CTRL_ENABLE;
|
|
|
|
if (duplex)
|
|
flow |= (pause_time << MAC_FLOW_CTRL_PT_SHIFT);
|
|
writel(flow, ioaddr + MAC_FLOW_CTRL);
|
|
}
|
|
|
|
/* No PMT module supported for this Ethernet Controller.
|
|
* Tested on ST platforms only.
|
|
*/
|
|
static void dwmac100_pmt(unsigned long ioaddr, unsigned long mode)
|
|
{
|
|
return;
|
|
}
|
|
|
|
struct stmmac_ops dwmac100_ops = {
|
|
.core_init = dwmac100_core_init,
|
|
.dump_regs = dwmac100_dump_mac_regs,
|
|
.host_irq_status = dwmac100_irq_status,
|
|
.set_filter = dwmac100_set_filter,
|
|
.flow_ctrl = dwmac100_flow_ctrl,
|
|
.pmt = dwmac100_pmt,
|
|
.set_umac_addr = dwmac100_set_umac_addr,
|
|
.get_umac_addr = dwmac100_get_umac_addr,
|
|
};
|
|
|
|
struct mac_device_info *dwmac100_setup(unsigned long ioaddr)
|
|
{
|
|
struct mac_device_info *mac;
|
|
|
|
mac = kzalloc(sizeof(const struct mac_device_info), GFP_KERNEL);
|
|
if (!mac)
|
|
return NULL;
|
|
|
|
pr_info("\tDWMAC100\n");
|
|
|
|
mac->mac = &dwmac100_ops;
|
|
mac->dma = &dwmac100_dma_ops;
|
|
|
|
mac->pmt = PMT_NOT_SUPPORTED;
|
|
mac->link.port = MAC_CONTROL_PS;
|
|
mac->link.duplex = MAC_CONTROL_F;
|
|
mac->link.speed = 0;
|
|
mac->mii.addr = MAC_MII_ADDR;
|
|
mac->mii.data = MAC_MII_DATA;
|
|
|
|
return mac;
|
|
}
|