kernel-ark/drivers/net/wireless/iwlwifi/iwl-channel.h
Zhu Yi b481de9ca0 [IWLWIFI]: add iwlwifi wireless drivers
This patch adds the mac80211 based wireless drivers for the Intel
PRO/Wireless 3945ABG/BG Network Connection and Intel Wireless WiFi
Link AGN (4965) adapters.

[ Move driver into it's own directory -DaveM ]

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:39 -07:00

162 lines
5.5 KiB
C

/******************************************************************************
*
* Copyright(c) 2005 - 2007 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* James P. Ketrenos <ipw2100-admin@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
*****************************************************************************/
#ifndef __iwl_channel_h__
#define __iwl_channel_h__
#define IWL_NUM_SCAN_RATES (2)
struct iwl_channel_tgd_info {
u8 type;
s8 max_power;
};
struct iwl_channel_tgh_info {
s64 last_radar_time;
};
/* current Tx power values to use, one for each rate for each channel.
* requested power is limited by:
* -- regulatory EEPROM limits for this channel
* -- hardware capabilities (clip-powers)
* -- spectrum management
* -- user preference (e.g. iwconfig)
* when requested power is set, base power index must also be set. */
struct iwl_channel_power_info {
struct iwl_tx_power tpc; /* actual radio and DSP gain settings */
s8 power_table_index; /* actual (compenst'd) index into gain table */
s8 base_power_index; /* gain index for power at factory temp. */
s8 requested_power; /* power (dBm) requested for this chnl/rate */
};
/* current scan Tx power values to use, one for each scan rate for each
* channel. */
struct iwl_scan_power_info {
struct iwl_tx_power tpc; /* actual radio and DSP gain settings */
s8 power_table_index; /* actual (compenst'd) index into gain table */
s8 requested_power; /* scan pwr (dBm) requested for chnl/rate */
};
/* Channel unlock period is 15 seconds. If no beacon or probe response
* has been received within 15 seconds on a locked channel then the channel
* remains locked. */
#define TX_UNLOCK_PERIOD 15
/* CSA lock period is 15 seconds. If a CSA has been received on a channel in
* the last 15 seconds, the channel is locked */
#define CSA_LOCK_PERIOD 15
/*
* One for each channel, holds all channel setup data
* Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant
* with one another!
*/
#define IWL4965_MAX_RATE (33)
struct iwl_channel_info {
struct iwl_channel_tgd_info tgd;
struct iwl_channel_tgh_info tgh;
struct iwl_eeprom_channel eeprom; /* EEPROM regulatory limit */
struct iwl_eeprom_channel fat_eeprom; /* EEPROM regulatory limit for
* FAT channel */
u8 channel; /* channel number */
u8 flags; /* flags copied from EEPROM */
s8 max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
s8 curr_txpow; /* (dBm) regulatory/spectrum/user (not h/w) */
s8 min_power; /* always 0 */
s8 scan_power; /* (dBm) regul. eeprom, direct scans, any rate */
u8 group_index; /* 0-4, maps channel to group1/2/3/4/5 */
u8 band_index; /* 0-4, maps channel to band1/2/3/4/5 */
u8 phymode; /* MODE_IEEE80211{A,B,G} */
/* Radio/DSP gain settings for each "normal" data Tx rate.
* These include, in addition to RF and DSP gain, a few fields for
* remembering/modifying gain settings (indexes). */
struct iwl_channel_power_info power_info[IWL4965_MAX_RATE];
#if IWL == 4965
/* FAT channel info */
s8 fat_max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
s8 fat_curr_txpow; /* (dBm) regulatory/spectrum/user (not h/w) */
s8 fat_min_power; /* always 0 */
s8 fat_scan_power; /* (dBm) eeprom, direct scans, any rate */
u8 fat_flags; /* flags copied from EEPROM */
u8 fat_extension_channel;
#endif
/* Radio/DSP gain settings for each scan rate, for directed scans. */
struct iwl_scan_power_info scan_pwr_info[IWL_NUM_SCAN_RATES];
};
struct iwl_clip_group {
/* maximum power level to prevent clipping for each rate, derived by
* us from this band's saturation power in EEPROM */
const s8 clip_powers[IWL_MAX_RATES];
};
static inline int is_channel_valid(const struct iwl_channel_info *ch_info)
{
if (ch_info == NULL)
return 0;
return (ch_info->flags & EEPROM_CHANNEL_VALID) ? 1 : 0;
}
static inline int is_channel_narrow(const struct iwl_channel_info *ch_info)
{
return (ch_info->flags & EEPROM_CHANNEL_NARROW) ? 1 : 0;
}
static inline int is_channel_radar(const struct iwl_channel_info *ch_info)
{
return (ch_info->flags & EEPROM_CHANNEL_RADAR) ? 1 : 0;
}
static inline u8 is_channel_a_band(const struct iwl_channel_info *ch_info)
{
return ch_info->phymode == MODE_IEEE80211A;
}
static inline u8 is_channel_bg_band(const struct iwl_channel_info *ch_info)
{
return ((ch_info->phymode == MODE_IEEE80211B) ||
(ch_info->phymode == MODE_IEEE80211G));
}
static inline int is_channel_passive(const struct iwl_channel_info *ch)
{
return (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) ? 1 : 0;
}
static inline int is_channel_ibss(const struct iwl_channel_info *ch)
{
return ((ch->flags & EEPROM_CHANNEL_IBSS)) ? 1 : 0;
}
extern const struct iwl_channel_info *iwl_get_channel_info(
const struct iwl_priv *priv, int phymode, u16 channel);
#endif