kernel-ark/arch/arm/mach-imx/mx25.h
Shawn Guo 50f2de6126 ARM: imx: include hardware.h rather than mach/hardware.h
It moves a bunch of header files included in hardware.h and itself
from mach-imx/include/mach to mach-imx, and updates users to include
hardware.h rather than mach/hardware.h.  The files in mach-imx/devices
will need to include "../hardware.h".

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-10-15 10:05:43 +08:00

118 lines
4.6 KiB
C

#ifndef __MACH_MX25_H__
#define __MACH_MX25_H__
#define MX25_AIPS1_BASE_ADDR 0x43f00000
#define MX25_AIPS1_SIZE SZ_1M
#define MX25_AIPS2_BASE_ADDR 0x53f00000
#define MX25_AIPS2_SIZE SZ_1M
#define MX25_AVIC_BASE_ADDR 0x68000000
#define MX25_AVIC_SIZE SZ_1M
#define MX25_I2C1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x80000)
#define MX25_I2C3_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x84000)
#define MX25_CAN1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x88000)
#define MX25_CAN2_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x8c000)
#define MX25_I2C2_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x98000)
#define MX25_CSPI1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0xa4000)
#define MX25_IOMUXC_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0xac000)
#define MX25_CRM_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x80000)
#define MX25_GPT1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x90000)
#define MX25_GPIO4_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x9c000)
#define MX25_PWM2_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xa0000)
#define MX25_GPIO3_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xa4000)
#define MX25_PWM3_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xa8000)
#define MX25_PWM4_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xc8000)
#define MX25_GPIO1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xcc000)
#define MX25_GPIO2_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xd0000)
#define MX25_WDOG_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xdc000)
#define MX25_PWM1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xe0000)
#define MX25_UART1_BASE_ADDR 0x43f90000
#define MX25_UART2_BASE_ADDR 0x43f94000
#define MX25_AUDMUX_BASE_ADDR 0x43fb0000
#define MX25_UART3_BASE_ADDR 0x5000c000
#define MX25_UART4_BASE_ADDR 0x50008000
#define MX25_UART5_BASE_ADDR 0x5002c000
#define MX25_CSPI3_BASE_ADDR 0x50004000
#define MX25_CSPI2_BASE_ADDR 0x50010000
#define MX25_FEC_BASE_ADDR 0x50038000
#define MX25_SSI2_BASE_ADDR 0x50014000
#define MX25_SSI1_BASE_ADDR 0x50034000
#define MX25_NFC_BASE_ADDR 0xbb000000
#define MX25_IIM_BASE_ADDR 0x53ff0000
#define MX25_DRYICE_BASE_ADDR 0x53ffc000
#define MX25_ESDHC1_BASE_ADDR 0x53fb4000
#define MX25_ESDHC2_BASE_ADDR 0x53fb8000
#define MX25_LCDC_BASE_ADDR 0x53fbc000
#define MX25_KPP_BASE_ADDR 0x43fa8000
#define MX25_SDMA_BASE_ADDR 0x53fd4000
#define MX25_USB_BASE_ADDR 0x53ff4000
#define MX25_USB_OTG_BASE_ADDR (MX25_USB_BASE_ADDR + 0x0000)
/*
* The reference manual (IMX25RM, Rev. 1, 06/2009) specifies an offset of 0x200
* for the host controller. Early documentation drafts specified 0x400 and
* Freescale internal sources confirm only the latter value to work.
*/
#define MX25_USB_HS_BASE_ADDR (MX25_USB_BASE_ADDR + 0x0400)
#define MX25_CSI_BASE_ADDR 0x53ff8000
#define MX25_IO_P2V(x) IMX_IO_P2V(x)
#define MX25_IO_ADDRESS(x) IOMEM(MX25_IO_P2V(x))
/*
* Interrupt numbers
*/
#include <asm/irq.h>
#define MX25_INT_CSPI3 (NR_IRQS_LEGACY + 0)
#define MX25_INT_I2C1 (NR_IRQS_LEGACY + 3)
#define MX25_INT_I2C2 (NR_IRQS_LEGACY + 4)
#define MX25_INT_UART4 (NR_IRQS_LEGACY + 5)
#define MX25_INT_ESDHC2 (NR_IRQS_LEGACY + 8)
#define MX25_INT_ESDHC1 (NR_IRQS_LEGACY + 9)
#define MX25_INT_I2C3 (NR_IRQS_LEGACY + 10)
#define MX25_INT_SSI2 (NR_IRQS_LEGACY + 11)
#define MX25_INT_SSI1 (NR_IRQS_LEGACY + 12)
#define MX25_INT_CSPI2 (NR_IRQS_LEGACY + 13)
#define MX25_INT_CSPI1 (NR_IRQS_LEGACY + 14)
#define MX25_INT_GPIO3 (NR_IRQS_LEGACY + 16)
#define MX25_INT_CSI (NR_IRQS_LEGACY + 17)
#define MX25_INT_UART3 (NR_IRQS_LEGACY + 18)
#define MX25_INT_GPIO4 (NR_IRQS_LEGACY + 23)
#define MX25_INT_KPP (NR_IRQS_LEGACY + 24)
#define MX25_INT_DRYICE (NR_IRQS_LEGACY + 25)
#define MX25_INT_PWM1 (NR_IRQS_LEGACY + 26)
#define MX25_INT_UART2 (NR_IRQS_LEGACY + 32)
#define MX25_INT_NFC (NR_IRQS_LEGACY + 33)
#define MX25_INT_SDMA (NR_IRQS_LEGACY + 34)
#define MX25_INT_USB_HS (NR_IRQS_LEGACY + 35)
#define MX25_INT_PWM2 (NR_IRQS_LEGACY + 36)
#define MX25_INT_USB_OTG (NR_IRQS_LEGACY + 37)
#define MX25_INT_LCDC (NR_IRQS_LEGACY + 39)
#define MX25_INT_UART5 (NR_IRQS_LEGACY + 40)
#define MX25_INT_PWM3 (NR_IRQS_LEGACY + 41)
#define MX25_INT_PWM4 (NR_IRQS_LEGACY + 42)
#define MX25_INT_CAN1 (NR_IRQS_LEGACY + 43)
#define MX25_INT_CAN2 (NR_IRQS_LEGACY + 44)
#define MX25_INT_UART1 (NR_IRQS_LEGACY + 45)
#define MX25_INT_GPIO2 (NR_IRQS_LEGACY + 51)
#define MX25_INT_GPIO1 (NR_IRQS_LEGACY + 52)
#define MX25_INT_GPT1 (NR_IRQS_LEGACY + 54)
#define MX25_INT_FEC (NR_IRQS_LEGACY + 57)
#define MX25_DMA_REQ_SSI2_RX1 22
#define MX25_DMA_REQ_SSI2_TX1 23
#define MX25_DMA_REQ_SSI2_RX0 24
#define MX25_DMA_REQ_SSI2_TX0 25
#define MX25_DMA_REQ_SSI1_RX1 26
#define MX25_DMA_REQ_SSI1_TX1 27
#define MX25_DMA_REQ_SSI1_RX0 28
#define MX25_DMA_REQ_SSI1_TX0 29
#ifndef __ASSEMBLY__
extern int mx25_revision(void);
#endif
#endif /* ifndef __MACH_MX25_H__ */