ef6ad5c35e
Both camera drivers can function without GPIO support, in which case they will only support the 10 bit data width mode. But the two respective switch have to depend on CONFIG_GENERIC_GPIO. Additionally remove redundant gpio_is_valid tests - they are repeated in bus_switch_request() functions. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
885 lines
27 KiB
Plaintext
885 lines
27 KiB
Plaintext
#
|
|
# Multimedia Video device configuration
|
|
#
|
|
|
|
menuconfig VIDEO_CAPTURE_DRIVERS
|
|
bool "Video capture adapters"
|
|
depends on VIDEO_V4L2
|
|
default y
|
|
---help---
|
|
Say Y here to enable selecting the video adapters for
|
|
webcams, analog TV, and hybrid analog/digital TV.
|
|
Some of those devices also supports FM radio.
|
|
|
|
if VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2
|
|
|
|
config VIDEO_ADV_DEBUG
|
|
bool "Enable advanced debug functionality"
|
|
default n
|
|
---help---
|
|
Say Y here to enable advanced debugging functionality on some
|
|
V4L devices.
|
|
In doubt, say N.
|
|
|
|
config VIDEO_HELPER_CHIPS_AUTO
|
|
bool "Autoselect pertinent encoders/decoders and other helper chips"
|
|
default y
|
|
---help---
|
|
Most video cards may require additional modules to encode or
|
|
decode audio/video standards. This option will autoselect
|
|
all pertinent modules to each selected video module.
|
|
|
|
Unselect this only if you know exactly what you are doing, since
|
|
it may break support on some boards.
|
|
|
|
In doubt, say Y.
|
|
|
|
#
|
|
# Encoder / Decoder module configuration
|
|
#
|
|
|
|
menu "Encoders/decoders and other helper chips"
|
|
depends on !VIDEO_HELPER_CHIPS_AUTO
|
|
|
|
comment "Audio decoders"
|
|
|
|
config VIDEO_TVAUDIO
|
|
tristate "Simple audio decoder chips"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for several audio decoder chips found on some bt8xx boards:
|
|
Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
|
|
tea6320, tea6420, tda8425, ta8874z.
|
|
Microchip: pic16c54 based design on ProVideo PV951 board.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tvaudio.
|
|
|
|
config VIDEO_TDA7432
|
|
tristate "Philips TDA7432 audio processor"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for tda7432 audio decoder chip found on some bt8xx boards.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tda7432.
|
|
|
|
config VIDEO_TDA9840
|
|
tristate "Philips TDA9840 audio processor"
|
|
depends on I2C
|
|
---help---
|
|
Support for tda9840 audio decoder chip found on some Zoran boards.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tda9840.
|
|
|
|
config VIDEO_TDA9875
|
|
tristate "Philips TDA9875 audio processor"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for tda9875 audio decoder chip found on some bt8xx boards.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tda9875.
|
|
|
|
config VIDEO_TEA6415C
|
|
tristate "Philips TEA6415C audio processor"
|
|
depends on I2C
|
|
---help---
|
|
Support for tea6415c audio decoder chip found on some bt8xx boards.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tea6415c.
|
|
|
|
config VIDEO_TEA6420
|
|
tristate "Philips TEA6420 audio processor"
|
|
depends on I2C
|
|
---help---
|
|
Support for tea6420 audio decoder chip found on some bt8xx boards.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tea6420.
|
|
|
|
config VIDEO_MSP3400
|
|
tristate "Micronas MSP34xx audio decoders"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Micronas MSP34xx series of audio decoders.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called msp3400.
|
|
|
|
config VIDEO_CS5345
|
|
tristate "Cirrus Logic CS5345 audio ADC"
|
|
depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
|
|
---help---
|
|
Support for the Cirrus Logic CS5345 24-bit, 192 kHz
|
|
stereo A/D converter.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called cs5345.
|
|
|
|
config VIDEO_CS53L32A
|
|
tristate "Cirrus Logic CS53L32A audio ADC"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Cirrus Logic CS53L32A low voltage
|
|
stereo A/D converter.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called cs53l32a.
|
|
|
|
config VIDEO_M52790
|
|
tristate "Mitsubishi M52790 A/V switch"
|
|
depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
|
|
---help---
|
|
Support for the Mitsubishi M52790 A/V switch.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called m52790.
|
|
|
|
config VIDEO_TLV320AIC23B
|
|
tristate "Texas Instruments TLV320AIC23B audio codec"
|
|
depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
|
|
---help---
|
|
Support for the Texas Instruments TLV320AIC23B audio codec.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tlv320aic23b.
|
|
|
|
config VIDEO_WM8775
|
|
tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Wolfson Microelectronics WM8775 high
|
|
performance stereo A/D Converter with a 4 channel input mixer.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called wm8775.
|
|
|
|
config VIDEO_WM8739
|
|
tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Wolfson Microelectronics WM8739
|
|
stereo A/D Converter.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called wm8739.
|
|
|
|
config VIDEO_VP27SMPX
|
|
tristate "Panasonic VP27s internal MPX"
|
|
depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
|
|
---help---
|
|
Support for the internal MPX of the Panasonic VP27s tuner.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called vp27smpx.
|
|
|
|
comment "Video decoders"
|
|
|
|
config VIDEO_BT819
|
|
tristate "BT819A VideoStream decoder"
|
|
depends on VIDEO_V4L1 && I2C
|
|
---help---
|
|
Support for BT819A video decoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called bt819.
|
|
|
|
config VIDEO_BT856
|
|
tristate "BT856 VideoStream decoder"
|
|
depends on VIDEO_V4L1 && I2C
|
|
---help---
|
|
Support for BT856 video decoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called bt856.
|
|
|
|
config VIDEO_BT866
|
|
tristate "BT866 VideoStream decoder"
|
|
depends on VIDEO_V4L1 && I2C
|
|
---help---
|
|
Support for BT866 video decoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called bt866.
|
|
|
|
config VIDEO_KS0127
|
|
tristate "KS0127 video decoder"
|
|
depends on VIDEO_V4L1 && I2C
|
|
---help---
|
|
Support for KS0127 video decoder.
|
|
|
|
This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
|
|
cards.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ks0127.
|
|
|
|
config VIDEO_OV7670
|
|
tristate "OmniVision OV7670 sensor support"
|
|
depends on I2C && VIDEO_V4L2
|
|
---help---
|
|
This is a Video4Linux2 sensor-level driver for the OmniVision
|
|
OV7670 VGA camera. It currently only works with the M88ALP01
|
|
controller.
|
|
|
|
config VIDEO_TCM825X
|
|
tristate "TCM825x camera sensor support"
|
|
depends on I2C && VIDEO_V4L2
|
|
---help---
|
|
This is a driver for the Toshiba TCM825x VGA camera sensor.
|
|
It is used for example in Nokia N800.
|
|
|
|
config VIDEO_SAA7110
|
|
tristate "Philips SAA7110 video decoder"
|
|
depends on VIDEO_V4L1 && I2C
|
|
---help---
|
|
Support for the Philips SAA7110 video decoders.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called saa7110.
|
|
|
|
config VIDEO_SAA7111
|
|
tristate "Philips SAA7111 video decoder"
|
|
depends on VIDEO_V4L1 && I2C
|
|
---help---
|
|
Support for the Philips SAA711 video decoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called saa7111.
|
|
|
|
config VIDEO_SAA7114
|
|
tristate "Philips SAA7114 video decoder"
|
|
depends on VIDEO_V4L1 && I2C
|
|
---help---
|
|
Support for the Philips SAA7114 video decoder. This driver
|
|
is used only on Zoran driver and should be moved soon to
|
|
SAA711x module.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called saa7114.
|
|
|
|
config VIDEO_SAA711X
|
|
tristate "Philips SAA7113/4/5 video decoders"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Philips SAA7113/4/5 video decoders.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called saa7115.
|
|
|
|
config VIDEO_SAA7191
|
|
tristate "Philips SAA7191 video decoder"
|
|
depends on VIDEO_V4L1 && I2C
|
|
---help---
|
|
Support for the Philips SAA7191 video decoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called saa7191.
|
|
|
|
config VIDEO_TVP5150
|
|
tristate "Texas Instruments TVP5150 video decoder"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Texas Instruments TVP5150 video decoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tvp5150.
|
|
|
|
config VIDEO_VPX3220
|
|
tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
|
|
depends on VIDEO_V4L1 && I2C
|
|
---help---
|
|
Support for VPX322x video decoders.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called vpx3220.
|
|
|
|
comment "Video and audio decoders"
|
|
|
|
source "drivers/media/video/cx25840/Kconfig"
|
|
|
|
comment "MPEG video encoders"
|
|
|
|
config VIDEO_CX2341X
|
|
tristate "Conexant CX2341x MPEG encoders"
|
|
depends on VIDEO_V4L2 && EXPERIMENTAL && VIDEO_V4L2_COMMON
|
|
---help---
|
|
Support for the Conexant CX23416 MPEG encoders
|
|
and CX23415 MPEG encoder/decoders.
|
|
|
|
This module currently supports the encoding functions only.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called cx2341x.
|
|
|
|
comment "Video encoders"
|
|
|
|
config VIDEO_SAA7127
|
|
tristate "Philips SAA7127/9 digital video encoders"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the Philips SAA7127/9 digital video encoders.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called saa7127.
|
|
|
|
config VIDEO_SAA7185
|
|
tristate "Philips SAA7185 video encoder"
|
|
depends on VIDEO_V4L1 && I2C
|
|
---help---
|
|
Support for the Philips SAA7185 video encoder.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called saa7185.
|
|
|
|
config VIDEO_ADV7170
|
|
tristate "Analog Devices ADV7170 video encoder"
|
|
depends on VIDEO_V4L1 && I2C
|
|
---help---
|
|
Support for the Analog Devices ADV7170 video encoder driver
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called adv7170.
|
|
|
|
config VIDEO_ADV7175
|
|
tristate "Analog Devices ADV7175 video encoder"
|
|
depends on VIDEO_V4L1 && I2C
|
|
---help---
|
|
Support for the Analog Devices ADV7175 video encoder driver
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called adv7175.
|
|
|
|
comment "Video improvement chips"
|
|
|
|
config VIDEO_UPD64031A
|
|
tristate "NEC Electronics uPD64031A Ghost Reduction"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the NEC Electronics uPD64031A Ghost Reduction
|
|
video chip. It is most often found in NTSC TV cards made for
|
|
Japan and is used to reduce the 'ghosting' effect that can
|
|
be present in analog TV broadcasts.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called upd64031a.
|
|
|
|
config VIDEO_UPD64083
|
|
tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
|
|
depends on VIDEO_V4L2 && I2C
|
|
---help---
|
|
Support for the NEC Electronics uPD64083 3-Dimensional Y/C
|
|
separation video chip. It is used to improve the quality of
|
|
the colors of a composite signal.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called upd64083.
|
|
|
|
endmenu # encoder / decoder chips
|
|
|
|
config VIDEO_VIVI
|
|
tristate "Virtual Video Driver"
|
|
depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
|
|
select VIDEOBUF_VMALLOC
|
|
default n
|
|
---help---
|
|
Enables a virtual video driver. This device shows a color bar
|
|
and a timestamp, as a real device would generate by using V4L2
|
|
api.
|
|
Say Y here if you want to test video apps or debug V4L devices.
|
|
In doubt, say N.
|
|
|
|
source "drivers/media/video/bt8xx/Kconfig"
|
|
|
|
config VIDEO_SAA6588
|
|
tristate "SAA6588 Radio Chip RDS decoder support on BT848 cards"
|
|
depends on I2C && VIDEO_BT848
|
|
|
|
help
|
|
Support for Radio Data System (RDS) decoder. This allows seeing
|
|
radio station identification transmitted using this standard.
|
|
Currently, it works only with bt8x8 chips.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called saa6588.
|
|
|
|
config VIDEO_PMS
|
|
tristate "Mediavision Pro Movie Studio Video For Linux"
|
|
depends on ISA && VIDEO_V4L1
|
|
help
|
|
Say Y if you have such a thing.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called pms.
|
|
|
|
config VIDEO_PLANB
|
|
tristate "PlanB Video-In on PowerMac"
|
|
depends on PPC_PMAC && VIDEO_V4L1 && BROKEN
|
|
help
|
|
PlanB is the V4L driver for the PowerMac 7x00/8x00 series video
|
|
input hardware. If you want to experiment with this, say Y.
|
|
Otherwise, or if you don't understand a word, say N. See
|
|
<http://www.cpu.lu/~mlan/linux/dev/planb.html> for more info.
|
|
|
|
Saying M will compile this driver as a module (planb).
|
|
|
|
config VIDEO_BWQCAM
|
|
tristate "Quickcam BW Video For Linux"
|
|
depends on PARPORT && VIDEO_V4L1
|
|
help
|
|
Say Y have if you the black and white version of the QuickCam
|
|
camera. See the next option for the color version.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called bw-qcam.
|
|
|
|
config VIDEO_CQCAM
|
|
tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL && PARPORT && VIDEO_V4L1
|
|
help
|
|
This is the video4linux driver for the colour version of the
|
|
Connectix QuickCam. If you have one of these cameras, say Y here,
|
|
otherwise say N. This driver does not work with the original
|
|
monochrome QuickCam, QuickCam VC or QuickClip. It is also available
|
|
as a module (c-qcam).
|
|
Read <file:Documentation/video4linux/CQcam.txt> for more information.
|
|
|
|
config VIDEO_W9966
|
|
tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux"
|
|
depends on PARPORT_1284 && PARPORT && VIDEO_V4L1
|
|
help
|
|
Video4linux driver for Winbond's w9966 based Webcams.
|
|
Currently tested with the LifeView FlyCam Supra.
|
|
If you have one of these cameras, say Y here
|
|
otherwise say N.
|
|
This driver is also available as a module (w9966).
|
|
|
|
Check out <file:Documentation/video4linux/w9966.txt> for more
|
|
information.
|
|
|
|
config VIDEO_CPIA
|
|
tristate "CPiA Video For Linux"
|
|
depends on VIDEO_V4L1
|
|
---help---
|
|
This is the video4linux driver for cameras based on Vision's CPiA
|
|
(Colour Processor Interface ASIC), such as the Creative Labs Video
|
|
Blaster Webcam II. If you have one of these cameras, say Y here
|
|
and select parallel port and/or USB lowlevel support below,
|
|
otherwise say N. This will not work with the Creative Webcam III.
|
|
|
|
Please read <file:Documentation/video4linux/README.cpia> for more
|
|
information.
|
|
|
|
This driver is also available as a module (cpia).
|
|
|
|
config VIDEO_CPIA_PP
|
|
tristate "CPiA Parallel Port Lowlevel Support"
|
|
depends on PARPORT_1284 && VIDEO_CPIA && PARPORT
|
|
help
|
|
This is the lowlevel parallel port support for cameras based on
|
|
Vision's CPiA (Colour Processor Interface ASIC), such as the
|
|
Creative Webcam II. If you have the parallel port version of one
|
|
of these cameras, say Y here, otherwise say N. It is also available
|
|
as a module (cpia_pp).
|
|
|
|
config VIDEO_CPIA_USB
|
|
tristate "CPiA USB Lowlevel Support"
|
|
depends on VIDEO_CPIA && USB
|
|
help
|
|
This is the lowlevel USB support for cameras based on Vision's CPiA
|
|
(Colour Processor Interface ASIC), such as the Creative Webcam II.
|
|
If you have the USB version of one of these cameras, say Y here,
|
|
otherwise say N. This will not work with the Creative Webcam III.
|
|
It is also available as a module (cpia_usb).
|
|
|
|
source "drivers/media/video/cpia2/Kconfig"
|
|
|
|
config VIDEO_SAA5246A
|
|
tristate "SAA5246A, SAA5281 Teletext processor"
|
|
depends on I2C && VIDEO_V4L2
|
|
help
|
|
Support for I2C bus based teletext using the SAA5246A or SAA5281
|
|
chip. Useful only if you live in Europe.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called saa5246a.
|
|
|
|
config VIDEO_SAA5249
|
|
tristate "SAA5249 Teletext processor"
|
|
depends on I2C && VIDEO_V4L2
|
|
help
|
|
Support for I2C bus based teletext using the SAA5249 chip. At the
|
|
moment this is only useful on some European WinTV cards.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called saa5249.
|
|
|
|
config TUNER_3036
|
|
tristate "SAB3036 tuner"
|
|
depends on I2C && VIDEO_V4L1
|
|
help
|
|
Say Y here to include support for Philips SAB3036 compatible tuners.
|
|
If in doubt, say N.
|
|
|
|
config VIDEO_VINO
|
|
tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
|
|
depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2
|
|
select I2C_ALGO_SGI
|
|
select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
|
|
help
|
|
Say Y here to build in support for the Vino video input system found
|
|
on SGI Indy machines.
|
|
|
|
config VIDEO_STRADIS
|
|
tristate "Stradis 4:2:2 MPEG-2 video driver (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && VIRT_TO_BUS
|
|
help
|
|
Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
|
|
driver for PCI. There is a product page at
|
|
<http://www.stradis.com/>.
|
|
|
|
config VIDEO_ZORAN_ZR36060
|
|
tristate
|
|
|
|
config VIDEO_ZORAN
|
|
tristate "Zoran ZR36057/36067 Video For Linux"
|
|
depends on PCI && I2C_ALGOBIT && VIDEO_V4L1 && VIRT_TO_BUS
|
|
help
|
|
Say Y for support for MJPEG capture cards based on the Zoran
|
|
36057/36067 PCI controller chipset. This includes the Iomega
|
|
Buz, Pinnacle DC10+ and the Linux Media Labs LML33. There is
|
|
a driver homepage at <http://mjpeg.sf.net/driver-zoran/>. For
|
|
more information, check <file:Documentation/video4linux/Zoran>.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called zr36067.
|
|
|
|
config VIDEO_ZORAN_BUZ
|
|
tristate "Iomega Buz support"
|
|
depends on VIDEO_ZORAN
|
|
select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO
|
|
select VIDEO_SAA7185 if VIDEO_HELPER_CHIPS_AUTO
|
|
select VIDEO_ZORAN_ZR36060
|
|
help
|
|
Support for the Iomega Buz MJPEG capture/playback card.
|
|
|
|
config VIDEO_ZORAN_DC10
|
|
tristate "Pinnacle/Miro DC10(+) support"
|
|
depends on VIDEO_ZORAN
|
|
select VIDEO_SAA7110
|
|
select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO
|
|
select VIDEO_ZORAN_ZR36060
|
|
help
|
|
Support for the Pinnacle/Miro DC10(+) MJPEG capture/playback
|
|
card.
|
|
|
|
config VIDEO_ZORAN_DC30
|
|
tristate "Pinnacle/Miro DC30(+) support"
|
|
depends on VIDEO_ZORAN
|
|
select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO
|
|
select VIDEO_VPX3220 if VIDEO_HELPER_CHIPS_AUTO
|
|
help
|
|
Support for the Pinnacle/Miro DC30(+) MJPEG capture/playback
|
|
card. This also supports really old DC10 cards based on the
|
|
zr36050 MJPEG codec and zr36016 VFE.
|
|
|
|
config VIDEO_ZORAN_LML33
|
|
tristate "Linux Media Labs LML33 support"
|
|
depends on VIDEO_ZORAN
|
|
select VIDEO_BT819 if VIDEO_HELPER_CHIPS_AUTO
|
|
select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO
|
|
select VIDEO_ZORAN_ZR36060
|
|
help
|
|
Support for the Linux Media Labs LML33 MJPEG capture/playback
|
|
card.
|
|
|
|
config VIDEO_ZORAN_LML33R10
|
|
tristate "Linux Media Labs LML33R10 support"
|
|
depends on VIDEO_ZORAN
|
|
select VIDEO_SAA7114 if VIDEO_HELPER_CHIPS_AUTO
|
|
select VIDEO_ADV7170 if VIDEO_HELPER_CHIPS_AUTO
|
|
select VIDEO_ZORAN_ZR36060
|
|
help
|
|
support for the Linux Media Labs LML33R10 MJPEG capture/playback
|
|
card.
|
|
|
|
config VIDEO_ZORAN_AVS6EYES
|
|
tristate "AverMedia 6 Eyes support (EXPERIMENTAL)"
|
|
depends on VIDEO_ZORAN && EXPERIMENTAL && VIDEO_V4L1
|
|
select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO
|
|
select VIDEO_KS0127 if VIDEO_HELPER_CHIPS_AUTO
|
|
select VIDEO_ZORAN_ZR36060
|
|
help
|
|
Support for the AverMedia 6 Eyes video surveillance card.
|
|
|
|
config VIDEO_MEYE
|
|
tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
|
|
depends on PCI && SONY_LAPTOP && VIDEO_V4L1
|
|
---help---
|
|
This is the video4linux driver for the Motion Eye camera found
|
|
in the Vaio Picturebook laptops. Please read the material in
|
|
<file:Documentation/video4linux/meye.txt> for more information.
|
|
|
|
If you say Y or M here, you need to say Y or M to "Sony Laptop
|
|
Extras" in the misc device section.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called meye.
|
|
|
|
source "drivers/media/video/saa7134/Kconfig"
|
|
|
|
config VIDEO_MXB
|
|
tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
|
|
depends on PCI && VIDEO_V4L1 && I2C
|
|
select VIDEO_SAA7146_VV
|
|
select VIDEO_TUNER
|
|
select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO
|
|
select VIDEO_TDA9840 if VIDEO_HELPER_CHIPS_AUTO
|
|
select VIDEO_TEA6415C if VIDEO_HELPER_CHIPS_AUTO
|
|
select VIDEO_TEA6420 if VIDEO_HELPER_CHIPS_AUTO
|
|
---help---
|
|
This is a video4linux driver for the 'Multimedia eXtension Board'
|
|
TV card by Siemens-Nixdorf.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called mxb.
|
|
|
|
config VIDEO_DPC
|
|
tristate "Philips-Semiconductors 'dpc7146 demonstration board'"
|
|
depends on PCI && VIDEO_V4L1 && I2C
|
|
select VIDEO_SAA7146_VV
|
|
select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO
|
|
---help---
|
|
This is a video4linux driver for the 'dpc7146 demonstration
|
|
board' by Philips-Semiconductors. It's the reference design
|
|
for SAA7146 bases boards, so if you have some unsupported
|
|
saa7146 based, analog video card, chances are good that it
|
|
will work with this skeleton driver.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called dpc7146.
|
|
|
|
config VIDEO_HEXIUM_ORION
|
|
tristate "Hexium HV-PCI6 and Orion frame grabber"
|
|
depends on PCI && VIDEO_V4L2 && I2C
|
|
select VIDEO_SAA7146_VV
|
|
---help---
|
|
This is a video4linux driver for the Hexium HV-PCI6 and
|
|
Orion frame grabber cards by Hexium.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called hexium_orion.
|
|
|
|
config VIDEO_HEXIUM_GEMINI
|
|
tristate "Hexium Gemini frame grabber"
|
|
depends on PCI && VIDEO_V4L2 && I2C
|
|
select VIDEO_SAA7146_VV
|
|
---help---
|
|
This is a video4linux driver for the Hexium Gemini frame
|
|
grabber card by Hexium. Please note that the Gemini Dual
|
|
card is *not* fully supported.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called hexium_gemini.
|
|
|
|
source "drivers/media/video/cx88/Kconfig"
|
|
|
|
source "drivers/media/video/cx23885/Kconfig"
|
|
|
|
source "drivers/media/video/ivtv/Kconfig"
|
|
|
|
config VIDEO_M32R_AR
|
|
tristate "AR devices"
|
|
depends on M32R && VIDEO_V4L1
|
|
---help---
|
|
This is a video4linux driver for the Renesas AR (Artificial Retina)
|
|
camera module.
|
|
|
|
config VIDEO_M32R_AR_M64278
|
|
tristate "AR device with color module M64278(VGA)"
|
|
depends on PLAT_M32700UT
|
|
select VIDEO_M32R_AR
|
|
---help---
|
|
This is a video4linux driver for the Renesas AR (Artificial
|
|
Retina) with M64278E-800 camera module.
|
|
This module supports VGA(640x480 pixels) resolutions.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called arv.
|
|
|
|
config VIDEO_CAFE_CCIC
|
|
tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support"
|
|
depends on PCI && I2C && VIDEO_V4L2
|
|
select VIDEO_OV7670
|
|
---help---
|
|
This is a video4linux2 driver for the Marvell 88ALP01 integrated
|
|
CMOS camera controller. This is the controller found on first-
|
|
generation OLPC systems.
|
|
|
|
#
|
|
# USB Multimedia device configuration
|
|
#
|
|
|
|
menuconfig V4L_USB_DRIVERS
|
|
bool "V4L USB devices"
|
|
depends on USB
|
|
default y
|
|
|
|
if V4L_USB_DRIVERS && USB
|
|
|
|
source "drivers/media/video/pvrusb2/Kconfig"
|
|
|
|
source "drivers/media/video/em28xx/Kconfig"
|
|
|
|
source "drivers/media/video/usbvision/Kconfig"
|
|
|
|
source "drivers/media/video/usbvideo/Kconfig"
|
|
|
|
source "drivers/media/video/et61x251/Kconfig"
|
|
|
|
config VIDEO_OVCAMCHIP
|
|
tristate "OmniVision Camera Chip support"
|
|
depends on I2C && VIDEO_V4L1
|
|
---help---
|
|
Support for the OmniVision OV6xxx and OV7xxx series of camera chips.
|
|
This driver is intended to be used with the ov511 and w9968cf USB
|
|
camera drivers.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ovcamchip.
|
|
|
|
config USB_W9968CF
|
|
tristate "USB W996[87]CF JPEG Dual Mode Camera support"
|
|
depends on VIDEO_V4L1 && I2C
|
|
select VIDEO_OVCAMCHIP
|
|
---help---
|
|
Say Y here if you want support for cameras based on OV681 or
|
|
Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.
|
|
|
|
This driver has an optional plugin, which is distributed as a
|
|
separate module only (released under GPL). It allows to use higher
|
|
resolutions and framerates, but cannot be included in the official
|
|
Linux kernel for performance purposes.
|
|
|
|
See <file:Documentation/video4linux/w9968cf.txt> for more info.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called w9968cf.
|
|
|
|
config USB_OV511
|
|
tristate "USB OV511 Camera support"
|
|
depends on VIDEO_V4L1
|
|
---help---
|
|
Say Y here if you want to connect this type of camera to your
|
|
computer's USB port. See <file:Documentation/video4linux/ov511.txt>
|
|
for more information and for a list of supported cameras.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ov511.
|
|
|
|
config USB_SE401
|
|
tristate "USB SE401 Camera support"
|
|
depends on VIDEO_V4L1
|
|
---help---
|
|
Say Y here if you want to connect this type of camera to your
|
|
computer's USB port. See <file:Documentation/video4linux/se401.txt>
|
|
for more information and for a list of supported cameras.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called se401.
|
|
|
|
source "drivers/media/video/sn9c102/Kconfig"
|
|
|
|
config USB_STV680
|
|
tristate "USB STV680 (Pencam) Camera support"
|
|
depends on VIDEO_V4L1
|
|
---help---
|
|
Say Y here if you want to connect this type of camera to your
|
|
computer's USB port. This includes the Pencam line of cameras.
|
|
See <file:Documentation/video4linux/stv680.txt> for more information
|
|
and for a list of supported cameras.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called stv680.
|
|
|
|
source "drivers/media/video/zc0301/Kconfig"
|
|
|
|
source "drivers/media/video/pwc/Kconfig"
|
|
|
|
config USB_ZR364XX
|
|
tristate "USB ZR364XX Camera support"
|
|
depends on VIDEO_V4L2
|
|
---help---
|
|
Say Y here if you want to connect this type of camera to your
|
|
computer's USB port.
|
|
See <file:Documentation/video4linux/zr364xx.txt> for more info
|
|
and list of supported cameras.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called zr364xx.
|
|
|
|
config USB_STKWEBCAM
|
|
tristate "USB Syntek DC1125 Camera support"
|
|
depends on VIDEO_V4L2 && EXPERIMENTAL
|
|
---help---
|
|
Say Y here if you want to use this type of camera.
|
|
Supported devices are typically found in some Asus laptops,
|
|
with USB id 174f:a311 and 05e1:0501. Other Syntek cameras
|
|
may be supported by the stk11xx driver, from which this is
|
|
derived, see http://stk11xx.sourceforge.net
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called stkwebcam.
|
|
|
|
endif # V4L_USB_DRIVERS
|
|
|
|
config SOC_CAMERA
|
|
tristate "SoC camera support"
|
|
depends on VIDEO_V4L2
|
|
select VIDEOBUF_DMA_SG
|
|
help
|
|
SoC Camera is a common API to several cameras, not connecting
|
|
over a bus like PCI or USB. For example some i2c camera connected
|
|
directly to the data bus of an SoC.
|
|
|
|
config SOC_CAMERA_MT9M001
|
|
tristate "mt9m001 support"
|
|
depends on SOC_CAMERA
|
|
select GPIO_PCA953X if MT9M001_PCA9536_SWITCH
|
|
help
|
|
This driver supports MT9M001 cameras from Micron, monochrome
|
|
and colour models.
|
|
|
|
config MT9M001_PCA9536_SWITCH
|
|
bool "pca9536 datawidth switch for mt9m001"
|
|
depends on SOC_CAMERA_MT9M001 && GENERIC_GPIO
|
|
help
|
|
Select this if your MT9M001 camera uses a PCA9536 I2C GPIO
|
|
extender to switch between 8 and 10 bit datawidth modes
|
|
|
|
config SOC_CAMERA_MT9V022
|
|
tristate "mt9v022 support"
|
|
depends on SOC_CAMERA
|
|
select GPIO_PCA953X if MT9V022_PCA9536_SWITCH
|
|
help
|
|
This driver supports MT9V022 cameras from Micron
|
|
|
|
config MT9V022_PCA9536_SWITCH
|
|
bool "pca9536 datawidth switch for mt9v022"
|
|
depends on SOC_CAMERA_MT9V022 && GENERIC_GPIO
|
|
help
|
|
Select this if your MT9V022 camera uses a PCA9536 I2C GPIO
|
|
extender to switch between 8 and 10 bit datawidth modes
|
|
|
|
config VIDEO_PXA27x
|
|
tristate "PXA27x Quick Capture Interface driver"
|
|
depends on VIDEO_DEV && PXA27x
|
|
select SOC_CAMERA
|
|
---help---
|
|
This is a v4l2 driver for the PXA27x Quick Capture Interface
|
|
|
|
endif # VIDEO_CAPTURE_DRIVERS
|