kernel-ark/drivers/media/pci/cx23885/netup-init.c

/*
 * netup-init.c
 *
 * NetUP Dual DVB-S2 CI driver
 *
 * Copyright (C) 2009 NetUP Inc.
 * Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru>
 * Copyright (C) 2009 Abylay Ospan <aospan@netup.ru>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include "cx23885.h"
#include "netup-init.h"

static void i2c_av_write(struct i2c_adapter *i2c, u16 reg, u8 val)
{
	int ret;
	u8 buf[3];
	struct i2c_msg msg = {
		.addr	= 0x88 >> 1,
		.flags	= 0,
		.buf	= buf,
		.len	= 3
	};

	buf[0] = reg >> 8;
	buf[1] = reg & 0xff;
	buf[2] = val;

	ret = i2c_transfer(i2c, &msg, 1);

	if (ret != 1)
		printk(KERN_ERR "%s: i2c write error!\n", __func__);
}

static void i2c_av_write4(struct i2c_adapter *i2c, u16 reg, u32 val)
{
	int ret;
	u8 buf[6];
	struct i2c_msg msg = {
		.addr	= 0x88 >> 1,
		.flags	= 0,
		.buf	= buf,
		.len	= 6
	};

	buf[0] = reg >> 8;
	buf[1] = reg & 0xff;
	buf[2] = val & 0xff;
	buf[3] = (val >> 8) & 0xff;
	buf[4] = (val >> 16) & 0xff;
	buf[5] = val >> 24;

	ret = i2c_transfer(i2c, &msg, 1);

	if (ret != 1)
		printk(KERN_ERR "%s: i2c write error!\n", __func__);
}

static u8 i2c_av_read(struct i2c_adapter *i2c, u16 reg)
{
	int ret;
	u8 buf[2];
	struct i2c_msg msg = {
		.addr	= 0x88 >> 1,
		.flags	= 0,
		.buf	= buf,
		.len	= 2
	};

	buf[0] = reg >> 8;
	buf[1] = reg & 0xff;

	ret = i2c_transfer(i2c, &msg, 1);

	if (ret != 1)
		printk(KERN_ERR "%s: i2c write error!\n", __func__);

	msg.flags = I2C_M_RD;
	msg.len = 1;

	ret = i2c_transfer(i2c, &msg, 1);

	if (ret != 1)
		printk(KERN_ERR "%s: i2c read error!\n", __func__);

	return buf[0];
}

static void i2c_av_and_or(struct i2c_adapter *i2c, u16 reg, unsigned and_mask,
								u8 or_value)
{
	i2c_av_write(i2c, reg, (i2c_av_read(i2c, reg) & and_mask) | or_value);
}
/* set 27MHz on AUX_CLK */
void netup_initialize(struct cx23885_dev *dev)
{
	struct cx23885_i2c *i2c_bus = &dev->i2c_bus[2];
	struct i2c_adapter *i2c = &i2c_bus->i2c_adap;

	/* Stop microcontroller */
	i2c_av_and_or(i2c, 0x803, ~0x10, 0x00);

	/* Aux PLL frac for 27 MHz */
	i2c_av_write4(i2c, 0x114, 0xea0eb3);

	/* Aux PLL int for 27 MHz */
	i2c_av_write4(i2c, 0x110, 0x090319);

	/* start microcontroller */
	i2c_av_and_or(i2c, 0x803, ~0x10, 0x10);
}