kernel-ark/drivers/media/pci/cx23885/cimax2.c
Mauro Carvalho Chehab 278ba83a3a [media] cimax2: Don't use dynamic static allocation
Dynamic static allocation is evil, as Kernel stack is too low, and
compilation complains about it on some archs:
        drivers/media/pci/cx23885/cimax2.c:149:1: warning: 'netup_write_i2c' uses dynamic stack allocation [enabled by default]
Instead, let's enforce a limit for the buffer. Considering that I2C
transfers are generally limited, and that devices used on USB has a
max data length of 64 bytes for the control URBs.
So, it seem safe to use 64 bytes as the hard limit for all those devices.
On most cases, the limit is a way lower than that, but this limit
is small enough to not affect the Kernel stack, and it is a no brain
limit, as using smaller ones would require to either carefully each
driver or to take a look on each datasheet.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-08 09:45:42 -02:00

551 lines
13 KiB
C

/*
* cimax2.c
*
* CIMax2(R) SP2 driver in conjunction with NetUp Dual DVB-S2 CI card
*
* Copyright (C) 2009 NetUP Inc.
* Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru>
* Copyright (C) 2009 Abylay Ospan <aospan@netup.ru>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
*
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "cx23885.h"
#include "cimax2.h"
#include "dvb_ca_en50221.h"
/* Max transfer size done by I2C transfer functions */
#define MAX_XFER_SIZE 64
/**** Bit definitions for MC417_RWD and MC417_OEN registers ***
bits 31-16
+-----------+
| Reserved |
+-----------+
bit 15 bit 14 bit 13 bit 12 bit 11 bit 10 bit 9 bit 8
+-------+-------+-------+-------+-------+-------+-------+-------+
| WR# | RD# | | ACK# | ADHI | ADLO | CS1# | CS0# |
+-------+-------+-------+-------+-------+-------+-------+-------+
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
+-------+-------+-------+-------+-------+-------+-------+-------+
| DATA7| DATA6| DATA5| DATA4| DATA3| DATA2| DATA1| DATA0|
+-------+-------+-------+-------+-------+-------+-------+-------+
***/
/* MC417 */
#define NETUP_DATA 0x000000ff
#define NETUP_WR 0x00008000
#define NETUP_RD 0x00004000
#define NETUP_ACK 0x00001000
#define NETUP_ADHI 0x00000800
#define NETUP_ADLO 0x00000400
#define NETUP_CS1 0x00000200
#define NETUP_CS0 0x00000100
#define NETUP_EN_ALL 0x00001000
#define NETUP_CTRL_OFF (NETUP_CS1 | NETUP_CS0 | NETUP_WR | NETUP_RD)
#define NETUP_CI_CTL 0x04
#define NETUP_CI_RD 1
#define NETUP_IRQ_DETAM 0x1
#define NETUP_IRQ_IRQAM 0x4
static unsigned int ci_dbg;
module_param(ci_dbg, int, 0644);
MODULE_PARM_DESC(ci_dbg, "Enable CI debugging");
static unsigned int ci_irq_enable;
module_param(ci_irq_enable, int, 0644);
MODULE_PARM_DESC(ci_irq_enable, "Enable IRQ from CAM");
#define ci_dbg_print(args...) \
do { \
if (ci_dbg) \
printk(KERN_DEBUG args); \
} while (0)
#define ci_irq_flags() (ci_irq_enable ? NETUP_IRQ_IRQAM : 0)
/* stores all private variables for communication with CI */
struct netup_ci_state {
struct dvb_ca_en50221 ca;
struct mutex ca_mutex;
struct i2c_adapter *i2c_adap;
u8 ci_i2c_addr;
int status;
struct work_struct work;
void *priv;
u8 current_irq_mode;
int current_ci_flag;
unsigned long next_status_checked_time;
};
static int netup_read_i2c(struct i2c_adapter *i2c_adap, u8 addr, u8 reg,
u8 *buf, int len)
{
int ret;
struct i2c_msg msg[] = {
{
.addr = addr,
.flags = 0,
.buf = &reg,
.len = 1
}, {
.addr = addr,
.flags = I2C_M_RD,
.buf = buf,
.len = len
}
};
ret = i2c_transfer(i2c_adap, msg, 2);
if (ret != 2) {
ci_dbg_print("%s: i2c read error, Reg = 0x%02x, Status = %d\n",
__func__, reg, ret);
return -1;
}
ci_dbg_print("%s: i2c read Addr=0x%04x, Reg = 0x%02x, data = %02x\n",
__func__, addr, reg, buf[0]);
return 0;
}
static int netup_write_i2c(struct i2c_adapter *i2c_adap, u8 addr, u8 reg,
u8 *buf, int len)
{
int ret;
u8 buffer[MAX_XFER_SIZE];
struct i2c_msg msg = {
.addr = addr,
.flags = 0,
.buf = &buffer[0],
.len = len + 1
};
if (1 + len > sizeof(buffer)) {
printk(KERN_WARNING
"%s: i2c wr reg=%04x: len=%d is too big!\n",
KBUILD_MODNAME, reg, len);
return -EINVAL;
}
buffer[0] = reg;
memcpy(&buffer[1], buf, len);
ret = i2c_transfer(i2c_adap, &msg, 1);
if (ret != 1) {
ci_dbg_print("%s: i2c write error, Reg=[0x%02x], Status=%d\n",
__func__, reg, ret);
return -1;
}
return 0;
}
static int netup_ci_get_mem(struct cx23885_dev *dev)
{
int mem;
unsigned long timeout = jiffies + msecs_to_jiffies(1);
for (;;) {
mem = cx_read(MC417_RWD);
if ((mem & NETUP_ACK) == 0)
break;
if (time_after(jiffies, timeout))
break;
udelay(1);
}
cx_set(MC417_RWD, NETUP_CTRL_OFF);
return mem & 0xff;
}
static int netup_ci_op_cam(struct dvb_ca_en50221 *en50221, int slot,
u8 flag, u8 read, int addr, u8 data)
{
struct netup_ci_state *state = en50221->data;
struct cx23885_tsport *port = state->priv;
struct cx23885_dev *dev = port->dev;
u8 store;
int mem;
int ret;
if (0 != slot)
return -EINVAL;
if (state->current_ci_flag != flag) {
ret = netup_read_i2c(state->i2c_adap, state->ci_i2c_addr,
0, &store, 1);
if (ret != 0)
return ret;
store &= ~0x0c;
store |= flag;
ret = netup_write_i2c(state->i2c_adap, state->ci_i2c_addr,
0, &store, 1);
if (ret != 0)
return ret;
}
state->current_ci_flag = flag;
mutex_lock(&dev->gpio_lock);
/* write addr */
cx_write(MC417_OEN, NETUP_EN_ALL);
cx_write(MC417_RWD, NETUP_CTRL_OFF |
NETUP_ADLO | (0xff & addr));
cx_clear(MC417_RWD, NETUP_ADLO);
cx_write(MC417_RWD, NETUP_CTRL_OFF |
NETUP_ADHI | (0xff & (addr >> 8)));
cx_clear(MC417_RWD, NETUP_ADHI);
if (read) { /* data in */
cx_write(MC417_OEN, NETUP_EN_ALL | NETUP_DATA);
} else /* data out */
cx_write(MC417_RWD, NETUP_CTRL_OFF | data);
/* choose chip */
cx_clear(MC417_RWD,
(state->ci_i2c_addr == 0x40) ? NETUP_CS0 : NETUP_CS1);
/* read/write */
cx_clear(MC417_RWD, (read) ? NETUP_RD : NETUP_WR);
mem = netup_ci_get_mem(dev);
mutex_unlock(&dev->gpio_lock);
if (!read)
if (mem < 0)
return -EREMOTEIO;
ci_dbg_print("%s: %s: chipaddr=[0x%x] addr=[0x%02x], %s=%x\n", __func__,
(read) ? "read" : "write", state->ci_i2c_addr, addr,
(flag == NETUP_CI_CTL) ? "ctl" : "mem",
(read) ? mem : data);
if (read)
return mem;
return 0;
}
int netup_ci_read_attribute_mem(struct dvb_ca_en50221 *en50221,
int slot, int addr)
{
return netup_ci_op_cam(en50221, slot, 0, NETUP_CI_RD, addr, 0);
}
int netup_ci_write_attribute_mem(struct dvb_ca_en50221 *en50221,
int slot, int addr, u8 data)
{
return netup_ci_op_cam(en50221, slot, 0, 0, addr, data);
}
int netup_ci_read_cam_ctl(struct dvb_ca_en50221 *en50221, int slot,
u8 addr)
{
return netup_ci_op_cam(en50221, slot, NETUP_CI_CTL,
NETUP_CI_RD, addr, 0);
}
int netup_ci_write_cam_ctl(struct dvb_ca_en50221 *en50221, int slot,
u8 addr, u8 data)
{
return netup_ci_op_cam(en50221, slot, NETUP_CI_CTL, 0, addr, data);
}
int netup_ci_slot_reset(struct dvb_ca_en50221 *en50221, int slot)
{
struct netup_ci_state *state = en50221->data;
u8 buf = 0x80;
int ret;
if (0 != slot)
return -EINVAL;
udelay(500);
ret = netup_write_i2c(state->i2c_adap, state->ci_i2c_addr,
0, &buf, 1);
if (ret != 0)
return ret;
udelay(500);
buf = 0x00;
ret = netup_write_i2c(state->i2c_adap, state->ci_i2c_addr,
0, &buf, 1);
msleep(1000);
dvb_ca_en50221_camready_irq(&state->ca, 0);
return 0;
}
int netup_ci_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot)
{
/* not implemented */
return 0;
}
static int netup_ci_set_irq(struct dvb_ca_en50221 *en50221, u8 irq_mode)
{
struct netup_ci_state *state = en50221->data;
int ret;
if (irq_mode == state->current_irq_mode)
return 0;
ci_dbg_print("%s: chipaddr=[0x%x] setting ci IRQ to [0x%x] \n",
__func__, state->ci_i2c_addr, irq_mode);
ret = netup_write_i2c(state->i2c_adap, state->ci_i2c_addr,
0x1b, &irq_mode, 1);
if (ret != 0)
return ret;
state->current_irq_mode = irq_mode;
return 0;
}
int netup_ci_slot_ts_ctl(struct dvb_ca_en50221 *en50221, int slot)
{
struct netup_ci_state *state = en50221->data;
u8 buf;
if (0 != slot)
return -EINVAL;
netup_read_i2c(state->i2c_adap, state->ci_i2c_addr,
0, &buf, 1);
buf |= 0x60;
return netup_write_i2c(state->i2c_adap, state->ci_i2c_addr,
0, &buf, 1);
}
/* work handler */
static void netup_read_ci_status(struct work_struct *work)
{
struct netup_ci_state *state =
container_of(work, struct netup_ci_state, work);
u8 buf[33];
int ret;
/* CAM module IRQ processing. fast operation */
dvb_ca_en50221_frda_irq(&state->ca, 0);
/* CAM module INSERT/REMOVE processing. slow operation because of i2c
* transfers */
if (time_after(jiffies, state->next_status_checked_time)
|| !state->status) {
ret = netup_read_i2c(state->i2c_adap, state->ci_i2c_addr,
0, &buf[0], 33);
state->next_status_checked_time = jiffies
+ msecs_to_jiffies(1000);
if (ret != 0)
return;
ci_dbg_print("%s: Slot Status Addr=[0x%04x], "
"Reg=[0x%02x], data=%02x, "
"TS config = %02x\n", __func__,
state->ci_i2c_addr, 0, buf[0],
buf[0]);
if (buf[0] & 1)
state->status = DVB_CA_EN50221_POLL_CAM_PRESENT |
DVB_CA_EN50221_POLL_CAM_READY;
else
state->status = 0;
}
}
/* CI irq handler */
int netup_ci_slot_status(struct cx23885_dev *dev, u32 pci_status)
{
struct cx23885_tsport *port = NULL;
struct netup_ci_state *state = NULL;
ci_dbg_print("%s:\n", __func__);
if (0 == (pci_status & (PCI_MSK_GPIO0 | PCI_MSK_GPIO1)))
return 0;
if (pci_status & PCI_MSK_GPIO0) {
port = &dev->ts1;
state = port->port_priv;
schedule_work(&state->work);
ci_dbg_print("%s: Wakeup CI0\n", __func__);
}
if (pci_status & PCI_MSK_GPIO1) {
port = &dev->ts2;
state = port->port_priv;
schedule_work(&state->work);
ci_dbg_print("%s: Wakeup CI1\n", __func__);
}
return 1;
}
int netup_poll_ci_slot_status(struct dvb_ca_en50221 *en50221,
int slot, int open)
{
struct netup_ci_state *state = en50221->data;
if (0 != slot)
return -EINVAL;
netup_ci_set_irq(en50221, open ? (NETUP_IRQ_DETAM | ci_irq_flags())
: NETUP_IRQ_DETAM);
return state->status;
}
int netup_ci_init(struct cx23885_tsport *port)
{
struct netup_ci_state *state;
u8 cimax_init[34] = {
0x00, /* module A control*/
0x00, /* auto select mask high A */
0x00, /* auto select mask low A */
0x00, /* auto select pattern high A */
0x00, /* auto select pattern low A */
0x44, /* memory access time A */
0x00, /* invert input A */
0x00, /* RFU */
0x00, /* RFU */
0x00, /* module B control*/
0x00, /* auto select mask high B */
0x00, /* auto select mask low B */
0x00, /* auto select pattern high B */
0x00, /* auto select pattern low B */
0x44, /* memory access time B */
0x00, /* invert input B */
0x00, /* RFU */
0x00, /* RFU */
0x00, /* auto select mask high Ext */
0x00, /* auto select mask low Ext */
0x00, /* auto select pattern high Ext */
0x00, /* auto select pattern low Ext */
0x00, /* RFU */
0x02, /* destination - module A */
0x01, /* power on (use it like store place) */
0x00, /* RFU */
0x00, /* int status read only */
ci_irq_flags() | NETUP_IRQ_DETAM, /* DETAM, IRQAM unmasked */
0x05, /* EXTINT=active-high, INT=push-pull */
0x00, /* USCG1 */
0x04, /* ack active low */
0x00, /* LOCK = 0 */
0x33, /* serial mode, rising in, rising out, MSB first*/
0x31, /* synchronization */
};
int ret;
ci_dbg_print("%s\n", __func__);
state = kzalloc(sizeof(struct netup_ci_state), GFP_KERNEL);
if (!state) {
ci_dbg_print("%s: Unable create CI structure!\n", __func__);
ret = -ENOMEM;
goto err;
}
port->port_priv = state;
switch (port->nr) {
case 1:
state->ci_i2c_addr = 0x40;
break;
case 2:
state->ci_i2c_addr = 0x41;
break;
}
state->i2c_adap = &port->dev->i2c_bus[0].i2c_adap;
state->ca.owner = THIS_MODULE;
state->ca.read_attribute_mem = netup_ci_read_attribute_mem;
state->ca.write_attribute_mem = netup_ci_write_attribute_mem;
state->ca.read_cam_control = netup_ci_read_cam_ctl;
state->ca.write_cam_control = netup_ci_write_cam_ctl;
state->ca.slot_reset = netup_ci_slot_reset;
state->ca.slot_shutdown = netup_ci_slot_shutdown;
state->ca.slot_ts_enable = netup_ci_slot_ts_ctl;
state->ca.poll_slot_status = netup_poll_ci_slot_status;
state->ca.data = state;
state->priv = port;
state->current_irq_mode = ci_irq_flags() | NETUP_IRQ_DETAM;
ret = netup_write_i2c(state->i2c_adap, state->ci_i2c_addr,
0, &cimax_init[0], 34);
/* lock registers */
ret |= netup_write_i2c(state->i2c_adap, state->ci_i2c_addr,
0x1f, &cimax_init[0x18], 1);
/* power on slots */
ret |= netup_write_i2c(state->i2c_adap, state->ci_i2c_addr,
0x18, &cimax_init[0x18], 1);
if (0 != ret)
goto err;
ret = dvb_ca_en50221_init(&port->frontends.adapter,
&state->ca,
/* flags */ 0,
/* n_slots */ 1);
if (0 != ret)
goto err;
INIT_WORK(&state->work, netup_read_ci_status);
schedule_work(&state->work);
ci_dbg_print("%s: CI initialized!\n", __func__);
return 0;
err:
ci_dbg_print("%s: Cannot initialize CI: Error %d.\n", __func__, ret);
kfree(state);
return ret;
}
void netup_ci_exit(struct cx23885_tsport *port)
{
struct netup_ci_state *state;
if (NULL == port)
return;
state = (struct netup_ci_state *)port->port_priv;
if (NULL == state)
return;
if (NULL == state->ca.data)
return;
dvb_ca_en50221_release(&state->ca);
kfree(state);
}