ee43eb788b
The kernel uses SPRG registers for various purposes, typically in low level assembly code as scratch registers or to hold per-cpu global infos such as the PACA or the current thread_info pointer. We want to be able to easily shuffle the usage of those registers as some implementations have specific constraints realted to some of them, for example, some have userspace readable aliases, etc.. and the current choice isn't always the best. This patch should not change any code generation, and replaces the usage of SPRN_SPRGn everywhere in the kernel with a named replacement and adds documentation next to the definition of the names as to what those are used for on each processor family. The only parts that still use the original numbers are bits of KVM or suspend/resume code that just blindly needs to save/restore all the SPRGs. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
407 lines
8.5 KiB
ArmAsm
407 lines
8.5 KiB
ArmAsm
#include <asm/processor.h>
|
|
#include <asm/ppc_asm.h>
|
|
#include <asm/reg.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/cputable.h>
|
|
#include <asm/thread_info.h>
|
|
#include <asm/page.h>
|
|
|
|
/*
|
|
* load_up_altivec(unused, unused, tsk)
|
|
* Disable VMX for the task which had it previously,
|
|
* and save its vector registers in its thread_struct.
|
|
* Enables the VMX for use in the kernel on return.
|
|
* On SMP we know the VMX is free, since we give it up every
|
|
* switch (ie, no lazy save of the vector registers).
|
|
*/
|
|
_GLOBAL(load_up_altivec)
|
|
mfmsr r5 /* grab the current MSR */
|
|
oris r5,r5,MSR_VEC@h
|
|
MTMSRD(r5) /* enable use of AltiVec now */
|
|
isync
|
|
|
|
/*
|
|
* For SMP, we don't do lazy VMX switching because it just gets too
|
|
* horrendously complex, especially when a task switches from one CPU
|
|
* to another. Instead we call giveup_altvec in switch_to.
|
|
* VRSAVE isn't dealt with here, that is done in the normal context
|
|
* switch code. Note that we could rely on vrsave value to eventually
|
|
* avoid saving all of the VREGs here...
|
|
*/
|
|
#ifndef CONFIG_SMP
|
|
LOAD_REG_ADDRBASE(r3, last_task_used_altivec)
|
|
toreal(r3)
|
|
PPC_LL r4,ADDROFF(last_task_used_altivec)(r3)
|
|
PPC_LCMPI 0,r4,0
|
|
beq 1f
|
|
|
|
/* Save VMX state to last_task_used_altivec's THREAD struct */
|
|
toreal(r4)
|
|
addi r4,r4,THREAD
|
|
SAVE_32VRS(0,r5,r4)
|
|
mfvscr vr0
|
|
li r10,THREAD_VSCR
|
|
stvx vr0,r10,r4
|
|
/* Disable VMX for last_task_used_altivec */
|
|
PPC_LL r5,PT_REGS(r4)
|
|
toreal(r5)
|
|
PPC_LL r4,_MSR-STACK_FRAME_OVERHEAD(r5)
|
|
lis r10,MSR_VEC@h
|
|
andc r4,r4,r10
|
|
PPC_STL r4,_MSR-STACK_FRAME_OVERHEAD(r5)
|
|
1:
|
|
#endif /* CONFIG_SMP */
|
|
|
|
/* Hack: if we get an altivec unavailable trap with VRSAVE
|
|
* set to all zeros, we assume this is a broken application
|
|
* that fails to set it properly, and thus we switch it to
|
|
* all 1's
|
|
*/
|
|
mfspr r4,SPRN_VRSAVE
|
|
cmpdi 0,r4,0
|
|
bne+ 1f
|
|
li r4,-1
|
|
mtspr SPRN_VRSAVE,r4
|
|
1:
|
|
/* enable use of VMX after return */
|
|
#ifdef CONFIG_PPC32
|
|
mfspr r5,SPRN_SPRG_THREAD /* current task's THREAD (phys) */
|
|
oris r9,r9,MSR_VEC@h
|
|
#else
|
|
ld r4,PACACURRENT(r13)
|
|
addi r5,r4,THREAD /* Get THREAD */
|
|
oris r12,r12,MSR_VEC@h
|
|
std r12,_MSR(r1)
|
|
#endif
|
|
li r4,1
|
|
li r10,THREAD_VSCR
|
|
stw r4,THREAD_USED_VR(r5)
|
|
lvx vr0,r10,r5
|
|
mtvscr vr0
|
|
REST_32VRS(0,r4,r5)
|
|
#ifndef CONFIG_SMP
|
|
/* Update last_task_used_altivec to 'current' */
|
|
subi r4,r5,THREAD /* Back to 'current' */
|
|
fromreal(r4)
|
|
PPC_STL r4,ADDROFF(last_task_used_altivec)(r3)
|
|
#endif /* CONFIG_SMP */
|
|
/* restore registers and return */
|
|
blr
|
|
|
|
/*
|
|
* giveup_altivec(tsk)
|
|
* Disable VMX for the task given as the argument,
|
|
* and save the vector registers in its thread_struct.
|
|
* Enables the VMX for use in the kernel on return.
|
|
*/
|
|
_GLOBAL(giveup_altivec)
|
|
mfmsr r5
|
|
oris r5,r5,MSR_VEC@h
|
|
SYNC
|
|
MTMSRD(r5) /* enable use of VMX now */
|
|
isync
|
|
PPC_LCMPI 0,r3,0
|
|
beqlr- /* if no previous owner, done */
|
|
addi r3,r3,THREAD /* want THREAD of task */
|
|
PPC_LL r5,PT_REGS(r3)
|
|
PPC_LCMPI 0,r5,0
|
|
SAVE_32VRS(0,r4,r3)
|
|
mfvscr vr0
|
|
li r4,THREAD_VSCR
|
|
stvx vr0,r4,r3
|
|
beq 1f
|
|
PPC_LL r4,_MSR-STACK_FRAME_OVERHEAD(r5)
|
|
#ifdef CONFIG_VSX
|
|
BEGIN_FTR_SECTION
|
|
lis r3,(MSR_VEC|MSR_VSX)@h
|
|
FTR_SECTION_ELSE
|
|
lis r3,MSR_VEC@h
|
|
ALT_FTR_SECTION_END_IFSET(CPU_FTR_VSX)
|
|
#else
|
|
lis r3,MSR_VEC@h
|
|
#endif
|
|
andc r4,r4,r3 /* disable FP for previous task */
|
|
PPC_STL r4,_MSR-STACK_FRAME_OVERHEAD(r5)
|
|
1:
|
|
#ifndef CONFIG_SMP
|
|
li r5,0
|
|
LOAD_REG_ADDRBASE(r4,last_task_used_altivec)
|
|
PPC_STL r5,ADDROFF(last_task_used_altivec)(r4)
|
|
#endif /* CONFIG_SMP */
|
|
blr
|
|
|
|
#ifdef CONFIG_VSX
|
|
|
|
#ifdef CONFIG_PPC32
|
|
#error This asm code isn't ready for 32-bit kernels
|
|
#endif
|
|
|
|
/*
|
|
* load_up_vsx(unused, unused, tsk)
|
|
* Disable VSX for the task which had it previously,
|
|
* and save its vector registers in its thread_struct.
|
|
* Reuse the fp and vsx saves, but first check to see if they have
|
|
* been saved already.
|
|
*/
|
|
_GLOBAL(load_up_vsx)
|
|
/* Load FP and VSX registers if they haven't been done yet */
|
|
andi. r5,r12,MSR_FP
|
|
beql+ load_up_fpu /* skip if already loaded */
|
|
andis. r5,r12,MSR_VEC@h
|
|
beql+ load_up_altivec /* skip if already loaded */
|
|
|
|
#ifndef CONFIG_SMP
|
|
ld r3,last_task_used_vsx@got(r2)
|
|
ld r4,0(r3)
|
|
cmpdi 0,r4,0
|
|
beq 1f
|
|
/* Disable VSX for last_task_used_vsx */
|
|
addi r4,r4,THREAD
|
|
ld r5,PT_REGS(r4)
|
|
ld r4,_MSR-STACK_FRAME_OVERHEAD(r5)
|
|
lis r6,MSR_VSX@h
|
|
andc r6,r4,r6
|
|
std r6,_MSR-STACK_FRAME_OVERHEAD(r5)
|
|
1:
|
|
#endif /* CONFIG_SMP */
|
|
ld r4,PACACURRENT(r13)
|
|
addi r4,r4,THREAD /* Get THREAD */
|
|
li r6,1
|
|
stw r6,THREAD_USED_VSR(r4) /* ... also set thread used vsr */
|
|
/* enable use of VSX after return */
|
|
oris r12,r12,MSR_VSX@h
|
|
std r12,_MSR(r1)
|
|
#ifndef CONFIG_SMP
|
|
/* Update last_task_used_vsx to 'current' */
|
|
ld r4,PACACURRENT(r13)
|
|
std r4,0(r3)
|
|
#endif /* CONFIG_SMP */
|
|
b fast_exception_return
|
|
|
|
/*
|
|
* __giveup_vsx(tsk)
|
|
* Disable VSX for the task given as the argument.
|
|
* Does NOT save vsx registers.
|
|
* Enables the VSX for use in the kernel on return.
|
|
*/
|
|
_GLOBAL(__giveup_vsx)
|
|
mfmsr r5
|
|
oris r5,r5,MSR_VSX@h
|
|
mtmsrd r5 /* enable use of VSX now */
|
|
isync
|
|
|
|
cmpdi 0,r3,0
|
|
beqlr- /* if no previous owner, done */
|
|
addi r3,r3,THREAD /* want THREAD of task */
|
|
ld r5,PT_REGS(r3)
|
|
cmpdi 0,r5,0
|
|
beq 1f
|
|
ld r4,_MSR-STACK_FRAME_OVERHEAD(r5)
|
|
lis r3,MSR_VSX@h
|
|
andc r4,r4,r3 /* disable VSX for previous task */
|
|
std r4,_MSR-STACK_FRAME_OVERHEAD(r5)
|
|
1:
|
|
#ifndef CONFIG_SMP
|
|
li r5,0
|
|
ld r4,last_task_used_vsx@got(r2)
|
|
std r5,0(r4)
|
|
#endif /* CONFIG_SMP */
|
|
blr
|
|
|
|
#endif /* CONFIG_VSX */
|
|
|
|
|
|
/*
|
|
* The routines below are in assembler so we can closely control the
|
|
* usage of floating-point registers. These routines must be called
|
|
* with preempt disabled.
|
|
*/
|
|
#ifdef CONFIG_PPC32
|
|
.data
|
|
fpzero:
|
|
.long 0
|
|
fpone:
|
|
.long 0x3f800000 /* 1.0 in single-precision FP */
|
|
fphalf:
|
|
.long 0x3f000000 /* 0.5 in single-precision FP */
|
|
|
|
#define LDCONST(fr, name) \
|
|
lis r11,name@ha; \
|
|
lfs fr,name@l(r11)
|
|
#else
|
|
|
|
.section ".toc","aw"
|
|
fpzero:
|
|
.tc FD_0_0[TC],0
|
|
fpone:
|
|
.tc FD_3ff00000_0[TC],0x3ff0000000000000 /* 1.0 */
|
|
fphalf:
|
|
.tc FD_3fe00000_0[TC],0x3fe0000000000000 /* 0.5 */
|
|
|
|
#define LDCONST(fr, name) \
|
|
lfd fr,name@toc(r2)
|
|
#endif
|
|
|
|
.text
|
|
/*
|
|
* Internal routine to enable floating point and set FPSCR to 0.
|
|
* Don't call it from C; it doesn't use the normal calling convention.
|
|
*/
|
|
fpenable:
|
|
#ifdef CONFIG_PPC32
|
|
stwu r1,-64(r1)
|
|
#else
|
|
stdu r1,-64(r1)
|
|
#endif
|
|
mfmsr r10
|
|
ori r11,r10,MSR_FP
|
|
mtmsr r11
|
|
isync
|
|
stfd fr0,24(r1)
|
|
stfd fr1,16(r1)
|
|
stfd fr31,8(r1)
|
|
LDCONST(fr1, fpzero)
|
|
mffs fr31
|
|
MTFSF_L(fr1)
|
|
blr
|
|
|
|
fpdisable:
|
|
mtlr r12
|
|
MTFSF_L(fr31)
|
|
lfd fr31,8(r1)
|
|
lfd fr1,16(r1)
|
|
lfd fr0,24(r1)
|
|
mtmsr r10
|
|
isync
|
|
addi r1,r1,64
|
|
blr
|
|
|
|
/*
|
|
* Vector add, floating point.
|
|
*/
|
|
_GLOBAL(vaddfp)
|
|
mflr r12
|
|
bl fpenable
|
|
li r0,4
|
|
mtctr r0
|
|
li r6,0
|
|
1: lfsx fr0,r4,r6
|
|
lfsx fr1,r5,r6
|
|
fadds fr0,fr0,fr1
|
|
stfsx fr0,r3,r6
|
|
addi r6,r6,4
|
|
bdnz 1b
|
|
b fpdisable
|
|
|
|
/*
|
|
* Vector subtract, floating point.
|
|
*/
|
|
_GLOBAL(vsubfp)
|
|
mflr r12
|
|
bl fpenable
|
|
li r0,4
|
|
mtctr r0
|
|
li r6,0
|
|
1: lfsx fr0,r4,r6
|
|
lfsx fr1,r5,r6
|
|
fsubs fr0,fr0,fr1
|
|
stfsx fr0,r3,r6
|
|
addi r6,r6,4
|
|
bdnz 1b
|
|
b fpdisable
|
|
|
|
/*
|
|
* Vector multiply and add, floating point.
|
|
*/
|
|
_GLOBAL(vmaddfp)
|
|
mflr r12
|
|
bl fpenable
|
|
stfd fr2,32(r1)
|
|
li r0,4
|
|
mtctr r0
|
|
li r7,0
|
|
1: lfsx fr0,r4,r7
|
|
lfsx fr1,r5,r7
|
|
lfsx fr2,r6,r7
|
|
fmadds fr0,fr0,fr2,fr1
|
|
stfsx fr0,r3,r7
|
|
addi r7,r7,4
|
|
bdnz 1b
|
|
lfd fr2,32(r1)
|
|
b fpdisable
|
|
|
|
/*
|
|
* Vector negative multiply and subtract, floating point.
|
|
*/
|
|
_GLOBAL(vnmsubfp)
|
|
mflr r12
|
|
bl fpenable
|
|
stfd fr2,32(r1)
|
|
li r0,4
|
|
mtctr r0
|
|
li r7,0
|
|
1: lfsx fr0,r4,r7
|
|
lfsx fr1,r5,r7
|
|
lfsx fr2,r6,r7
|
|
fnmsubs fr0,fr0,fr2,fr1
|
|
stfsx fr0,r3,r7
|
|
addi r7,r7,4
|
|
bdnz 1b
|
|
lfd fr2,32(r1)
|
|
b fpdisable
|
|
|
|
/*
|
|
* Vector reciprocal estimate. We just compute 1.0/x.
|
|
* r3 -> destination, r4 -> source.
|
|
*/
|
|
_GLOBAL(vrefp)
|
|
mflr r12
|
|
bl fpenable
|
|
li r0,4
|
|
LDCONST(fr1, fpone)
|
|
mtctr r0
|
|
li r6,0
|
|
1: lfsx fr0,r4,r6
|
|
fdivs fr0,fr1,fr0
|
|
stfsx fr0,r3,r6
|
|
addi r6,r6,4
|
|
bdnz 1b
|
|
b fpdisable
|
|
|
|
/*
|
|
* Vector reciprocal square-root estimate, floating point.
|
|
* We use the frsqrte instruction for the initial estimate followed
|
|
* by 2 iterations of Newton-Raphson to get sufficient accuracy.
|
|
* r3 -> destination, r4 -> source.
|
|
*/
|
|
_GLOBAL(vrsqrtefp)
|
|
mflr r12
|
|
bl fpenable
|
|
stfd fr2,32(r1)
|
|
stfd fr3,40(r1)
|
|
stfd fr4,48(r1)
|
|
stfd fr5,56(r1)
|
|
li r0,4
|
|
LDCONST(fr4, fpone)
|
|
LDCONST(fr5, fphalf)
|
|
mtctr r0
|
|
li r6,0
|
|
1: lfsx fr0,r4,r6
|
|
frsqrte fr1,fr0 /* r = frsqrte(s) */
|
|
fmuls fr3,fr1,fr0 /* r * s */
|
|
fmuls fr2,fr1,fr5 /* r * 0.5 */
|
|
fnmsubs fr3,fr1,fr3,fr4 /* 1 - s * r * r */
|
|
fmadds fr1,fr2,fr3,fr1 /* r = r + 0.5 * r * (1 - s * r * r) */
|
|
fmuls fr3,fr1,fr0 /* r * s */
|
|
fmuls fr2,fr1,fr5 /* r * 0.5 */
|
|
fnmsubs fr3,fr1,fr3,fr4 /* 1 - s * r * r */
|
|
fmadds fr1,fr2,fr3,fr1 /* r = r + 0.5 * r * (1 - s * r * r) */
|
|
stfsx fr1,r3,r6
|
|
addi r6,r6,4
|
|
bdnz 1b
|
|
lfd fr5,56(r1)
|
|
lfd fr4,48(r1)
|
|
lfd fr3,40(r1)
|
|
lfd fr2,32(r1)
|
|
b fpdisable
|