312 lines
9.2 KiB
C
312 lines
9.2 KiB
C
/* myri_sbus.h: Defines for MyriCOM MyriNET SBUS card driver.
|
|
*
|
|
* Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
|
|
*/
|
|
|
|
#ifndef _MYRI_SBUS_H
|
|
#define _MYRI_SBUS_H
|
|
|
|
/* LANAI Registers */
|
|
#define LANAI_IPF0 0x00UL /* Context zero state registers.*/
|
|
#define LANAI_CUR0 0x04UL
|
|
#define LANAI_PREV0 0x08UL
|
|
#define LANAI_DATA0 0x0cUL
|
|
#define LANAI_DPF0 0x10UL
|
|
#define LANAI_IPF1 0x14UL /* Context one state registers. */
|
|
#define LANAI_CUR1 0x18UL
|
|
#define LANAI_PREV1 0x1cUL
|
|
#define LANAI_DATA1 0x20UL
|
|
#define LANAI_DPF1 0x24UL
|
|
#define LANAI_ISTAT 0x28UL /* Interrupt status. */
|
|
#define LANAI_EIMASK 0x2cUL /* External IRQ mask. */
|
|
#define LANAI_ITIMER 0x30UL /* IRQ timer. */
|
|
#define LANAI_RTC 0x34UL /* Real Time Clock */
|
|
#define LANAI_CSUM 0x38UL /* Checksum. */
|
|
#define LANAI_DMAXADDR 0x3cUL /* SBUS DMA external address. */
|
|
#define LANAI_DMALADDR 0x40UL /* SBUS DMA local address. */
|
|
#define LANAI_DMACTR 0x44UL /* SBUS DMA counter. */
|
|
#define LANAI_RXDMAPTR 0x48UL /* Receive DMA pointer. */
|
|
#define LANAI_RXDMALIM 0x4cUL /* Receive DMA limit. */
|
|
#define LANAI_TXDMAPTR 0x50UL /* Transmit DMA pointer. */
|
|
#define LANAI_TXDMALIM 0x54UL /* Transmit DMA limit. */
|
|
#define LANAI_TXDMALIMT 0x58UL /* Transmit DMA limit w/tail. */
|
|
/* 0x5cUL, reserved */
|
|
#define LANAI_RBYTE 0x60UL /* Receive byte. */
|
|
/* 0x64-->0x6c, reserved */
|
|
#define LANAI_RHALF 0x70UL /* Receive half-word. */
|
|
/* 0x72UL, reserved */
|
|
#define LANAI_RWORD 0x74UL /* Receive word. */
|
|
#define LANAI_SALIGN 0x78UL /* Send align. */
|
|
#define LANAI_SBYTE 0x7cUL /* SingleSend send-byte. */
|
|
#define LANAI_SHALF 0x80UL /* SingleSend send-halfword. */
|
|
#define LANAI_SWORD 0x84UL /* SingleSend send-word. */
|
|
#define LANAI_SSENDT 0x88UL /* SingleSend special. */
|
|
#define LANAI_DMADIR 0x8cUL /* DMA direction. */
|
|
#define LANAI_DMASTAT 0x90UL /* DMA status. */
|
|
#define LANAI_TIMEO 0x94UL /* Timeout register. */
|
|
#define LANAI_MYRINET 0x98UL /* XXX MAGIC myricom thing */
|
|
#define LANAI_HWDEBUG 0x9cUL /* Hardware debugging reg. */
|
|
#define LANAI_LEDS 0xa0UL /* LED control. */
|
|
#define LANAI_VERS 0xa4UL /* Version register. */
|
|
#define LANAI_LINKON 0xa8UL /* Link activation reg. */
|
|
/* 0xac-->0x104, reserved */
|
|
#define LANAI_CVAL 0x108UL /* Clock value register. */
|
|
#define LANAI_REG_SIZE 0x10cUL
|
|
|
|
/* Interrupt status bits. */
|
|
#define ISTAT_DEBUG 0x80000000
|
|
#define ISTAT_HOST 0x40000000
|
|
#define ISTAT_LAN7 0x00800000
|
|
#define ISTAT_LAN6 0x00400000
|
|
#define ISTAT_LAN5 0x00200000
|
|
#define ISTAT_LAN4 0x00100000
|
|
#define ISTAT_LAN3 0x00080000
|
|
#define ISTAT_LAN2 0x00040000
|
|
#define ISTAT_LAN1 0x00020000
|
|
#define ISTAT_LAN0 0x00010000
|
|
#define ISTAT_WRDY 0x00008000
|
|
#define ISTAT_HRDY 0x00004000
|
|
#define ISTAT_SRDY 0x00002000
|
|
#define ISTAT_LINK 0x00001000
|
|
#define ISTAT_FRES 0x00000800
|
|
#define ISTAT_NRES 0x00000800
|
|
#define ISTAT_WAKE 0x00000400
|
|
#define ISTAT_OB2 0x00000200
|
|
#define ISTAT_OB1 0x00000100
|
|
#define ISTAT_TAIL 0x00000080
|
|
#define ISTAT_WDOG 0x00000040
|
|
#define ISTAT_TIME 0x00000020
|
|
#define ISTAT_DMA 0x00000010
|
|
#define ISTAT_SEND 0x00000008
|
|
#define ISTAT_BUF 0x00000004
|
|
#define ISTAT_RECV 0x00000002
|
|
#define ISTAT_BRDY 0x00000001
|
|
|
|
/* MYRI Registers */
|
|
#define MYRI_RESETOFF 0x00UL
|
|
#define MYRI_RESETON 0x04UL
|
|
#define MYRI_IRQOFF 0x08UL
|
|
#define MYRI_IRQON 0x0cUL
|
|
#define MYRI_WAKEUPOFF 0x10UL
|
|
#define MYRI_WAKEUPON 0x14UL
|
|
#define MYRI_IRQREAD 0x18UL
|
|
/* 0x1c-->0x3ffc, reserved */
|
|
#define MYRI_LOCALMEM 0x4000UL
|
|
#define MYRI_REG_SIZE 0x25000UL
|
|
|
|
/* Shared memory interrupt mask. */
|
|
#define SHMEM_IMASK_RX 0x00000002
|
|
#define SHMEM_IMASK_TX 0x00000001
|
|
|
|
/* Just to make things readable. */
|
|
#define KERNEL_CHANNEL 0
|
|
|
|
/* The size of this must be >= 129 bytes. */
|
|
struct myri_eeprom {
|
|
unsigned int cval;
|
|
unsigned short cpuvers;
|
|
unsigned char id[6];
|
|
unsigned int ramsz;
|
|
unsigned char fvers[32];
|
|
unsigned char mvers[16];
|
|
unsigned short dlval;
|
|
unsigned short brd_type;
|
|
unsigned short bus_type;
|
|
unsigned short prod_code;
|
|
unsigned int serial_num;
|
|
unsigned short _reserved[24];
|
|
unsigned int _unused[2];
|
|
};
|
|
|
|
/* EEPROM bus types, only SBUS is valid in this driver. */
|
|
#define BUS_TYPE_SBUS 1
|
|
|
|
/* EEPROM CPU revisions. */
|
|
#define CPUVERS_2_3 0x0203
|
|
#define CPUVERS_3_0 0x0300
|
|
#define CPUVERS_3_1 0x0301
|
|
#define CPUVERS_3_2 0x0302
|
|
#define CPUVERS_4_0 0x0400
|
|
#define CPUVERS_4_1 0x0401
|
|
#define CPUVERS_4_2 0x0402
|
|
#define CPUVERS_5_0 0x0500
|
|
|
|
/* MYRI Control Registers */
|
|
#define MYRICTRL_CTRL 0x00UL
|
|
#define MYRICTRL_IRQLVL 0x02UL
|
|
#define MYRICTRL_REG_SIZE 0x04UL
|
|
|
|
/* Global control register defines. */
|
|
#define CONTROL_ROFF 0x8000 /* Reset OFF. */
|
|
#define CONTROL_RON 0x4000 /* Reset ON. */
|
|
#define CONTROL_EIRQ 0x2000 /* Enable IRQ's. */
|
|
#define CONTROL_DIRQ 0x1000 /* Disable IRQ's. */
|
|
#define CONTROL_WON 0x0800 /* Wake-up ON. */
|
|
|
|
#define MYRI_SCATTER_ENTRIES 8
|
|
#define MYRI_GATHER_ENTRIES 16
|
|
|
|
struct myri_sglist {
|
|
u32 addr;
|
|
u32 len;
|
|
};
|
|
|
|
struct myri_rxd {
|
|
struct myri_sglist myri_scatters[MYRI_SCATTER_ENTRIES]; /* DMA scatter list.*/
|
|
u32 csum; /* HW computed checksum. */
|
|
u32 ctx;
|
|
u32 num_sg; /* Total scatter entries. */
|
|
};
|
|
|
|
struct myri_txd {
|
|
struct myri_sglist myri_gathers[MYRI_GATHER_ENTRIES]; /* DMA scatter list. */
|
|
u32 num_sg; /* Total scatter entries. */
|
|
u16 addr[4]; /* XXX address */
|
|
u32 chan;
|
|
u32 len; /* Total length of packet. */
|
|
u32 csum_off; /* Where data to csum is. */
|
|
u32 csum_field; /* Where csum goes in pkt. */
|
|
};
|
|
|
|
#define MYRINET_MTU 8432
|
|
#define RX_ALLOC_SIZE 8448
|
|
#define MYRI_PAD_LEN 2
|
|
#define RX_COPY_THRESHOLD 256
|
|
|
|
/* These numbers are cast in stone, new firmware is needed if
|
|
* you want to change them.
|
|
*/
|
|
#define TX_RING_MAXSIZE 16
|
|
#define RX_RING_MAXSIZE 16
|
|
|
|
#define TX_RING_SIZE 16
|
|
#define RX_RING_SIZE 16
|
|
|
|
/* GRRR... */
|
|
static __inline__ int NEXT_RX(int num)
|
|
{
|
|
/* XXX >=??? */
|
|
if(++num > RX_RING_SIZE)
|
|
num = 0;
|
|
return num;
|
|
}
|
|
|
|
static __inline__ int PREV_RX(int num)
|
|
{
|
|
if(--num < 0)
|
|
num = RX_RING_SIZE;
|
|
return num;
|
|
}
|
|
|
|
#define NEXT_TX(num) (((num) + 1) & (TX_RING_SIZE - 1))
|
|
#define PREV_TX(num) (((num) - 1) & (TX_RING_SIZE - 1))
|
|
|
|
#define TX_BUFFS_AVAIL(head, tail) \
|
|
((head) <= (tail) ? \
|
|
(head) + (TX_RING_SIZE - 1) - (tail) : \
|
|
(head) - (tail) - 1)
|
|
|
|
struct sendq {
|
|
u32 tail;
|
|
u32 head;
|
|
u32 hdebug;
|
|
u32 mdebug;
|
|
struct myri_txd myri_txd[TX_RING_MAXSIZE];
|
|
};
|
|
|
|
struct recvq {
|
|
u32 head;
|
|
u32 tail;
|
|
u32 hdebug;
|
|
u32 mdebug;
|
|
struct myri_rxd myri_rxd[RX_RING_MAXSIZE + 1];
|
|
};
|
|
|
|
#define MYRI_MLIST_SIZE 8
|
|
|
|
struct mclist {
|
|
u32 maxlen;
|
|
u32 len;
|
|
u32 cache;
|
|
struct pair {
|
|
u8 addr[8];
|
|
u32 val;
|
|
} mc_pairs[MYRI_MLIST_SIZE];
|
|
u8 bcast_addr[8];
|
|
};
|
|
|
|
struct myri_channel {
|
|
u32 state; /* State of the channel. */
|
|
u32 busy; /* Channel is busy. */
|
|
struct sendq sendq; /* Device tx queue. */
|
|
struct recvq recvq; /* Device rx queue. */
|
|
struct recvq recvqa; /* Device rx queue acked. */
|
|
u32 rbytes; /* Receive bytes. */
|
|
u32 sbytes; /* Send bytes. */
|
|
u32 rmsgs; /* Receive messages. */
|
|
u32 smsgs; /* Send messages. */
|
|
struct mclist mclist; /* Device multicast list. */
|
|
};
|
|
|
|
/* Values for per-channel state. */
|
|
#define STATE_WFH 0 /* Waiting for HOST. */
|
|
#define STATE_WFN 1 /* Waiting for NET. */
|
|
#define STATE_READY 2 /* Ready. */
|
|
|
|
struct myri_shmem {
|
|
u8 addr[8]; /* Board's address. */
|
|
u32 nchan; /* Number of channels. */
|
|
u32 burst; /* SBUS dma burst enable. */
|
|
u32 shakedown; /* DarkkkkStarrr Crashesss... */
|
|
u32 send; /* Send wanted. */
|
|
u32 imask; /* Interrupt enable mask. */
|
|
u32 mlevel; /* Map level. */
|
|
u32 debug[4]; /* Misc. debug areas. */
|
|
struct myri_channel channel; /* Only one channel on a host. */
|
|
};
|
|
|
|
struct myri_eth {
|
|
/* These are frequently accessed, keep together
|
|
* to obtain good cache hit rates.
|
|
*/
|
|
spinlock_t irq_lock;
|
|
struct myri_shmem __iomem *shmem; /* Shared data structures. */
|
|
void __iomem *cregs; /* Control register space. */
|
|
struct recvq __iomem *rqack; /* Where we ack rx's. */
|
|
struct recvq __iomem *rq; /* Where we put buffers. */
|
|
struct sendq __iomem *sq; /* Where we stuff tx's. */
|
|
struct net_device *dev; /* Linux/NET dev struct. */
|
|
int tx_old; /* To speed up tx cleaning. */
|
|
void __iomem *lregs; /* Quick ptr to LANAI regs. */
|
|
struct sk_buff *rx_skbs[RX_RING_SIZE+1];/* RX skb's */
|
|
struct sk_buff *tx_skbs[TX_RING_SIZE]; /* TX skb's */
|
|
|
|
/* These are less frequently accessed. */
|
|
void __iomem *regs; /* MyriCOM register space. */
|
|
void __iomem *lanai; /* View 2 of register space. */
|
|
unsigned int myri_bursts; /* SBUS bursts. */
|
|
struct myri_eeprom eeprom; /* Local copy of EEPROM. */
|
|
unsigned int reg_size; /* Size of register space. */
|
|
unsigned int shmem_base; /* Offset to shared ram. */
|
|
struct of_device *myri_op; /* Our OF device struct. */
|
|
};
|
|
|
|
/* We use this to acquire receive skb's that we can DMA directly into. */
|
|
#define ALIGNED_RX_SKB_ADDR(addr) \
|
|
((((unsigned long)(addr) + (64 - 1)) & ~(64 - 1)) - (unsigned long)(addr))
|
|
static inline struct sk_buff *myri_alloc_skb(unsigned int length, gfp_t gfp_flags)
|
|
{
|
|
struct sk_buff *skb;
|
|
|
|
skb = alloc_skb(length + 64, gfp_flags);
|
|
if(skb) {
|
|
int offset = ALIGNED_RX_SKB_ADDR(skb->data);
|
|
|
|
if(offset)
|
|
skb_reserve(skb, offset);
|
|
}
|
|
return skb;
|
|
}
|
|
|
|
#endif /* !(_MYRI_SBUS_H) */
|