kernel-ark/include/linux/rcupdate.h
Dipankar Sarma 21a1ea9eb4 [PATCH] rcu batch tuning
This patch adds new tunables for RCU queue and finished batches.  There are
two types of controls - number of completed RCU updates invoked in a batch
(blimit) and monitoring for high rate of incoming RCUs on a cpu (qhimark,
qlowmark).

By default, the per-cpu batch limit is set to a small value.  If the input
RCU rate exceeds the high watermark, we do two things - force quiescent
state on all cpus and set the batch limit of the CPU to INTMAX.  Setting
batch limit to INTMAX forces all finished RCUs to be processed in one shot.
 If we have more than INTMAX RCUs queued up, then we have bigger problems
anyway.  Once the incoming queued RCUs fall below the low watermark, the
batch limit is set to the default.

Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-08 14:14:01 -08:00

275 lines
9.5 KiB
C

/*
* Read-Copy Update mechanism for mutual exclusion
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* Copyright (C) IBM Corporation, 2001
*
* Author: Dipankar Sarma <dipankar@in.ibm.com>
*
* Based on the original work by Paul McKenney <paul.mckenney@us.ibm.com>
* and inputs from Rusty Russell, Andrea Arcangeli and Andi Kleen.
* Papers:
* http://www.rdrop.com/users/paulmck/paper/rclockpdcsproof.pdf
* http://lse.sourceforge.net/locking/rclock_OLS.2001.05.01c.sc.pdf (OLS2001)
*
* For detailed explanation of Read-Copy Update mechanism see -
* http://lse.sourceforge.net/locking/rcupdate.html
*
*/
#ifndef __LINUX_RCUPDATE_H
#define __LINUX_RCUPDATE_H
#ifdef __KERNEL__
#include <linux/cache.h>
#include <linux/spinlock.h>
#include <linux/threads.h>
#include <linux/percpu.h>
#include <linux/cpumask.h>
#include <linux/seqlock.h>
/**
* struct rcu_head - callback structure for use with RCU
* @next: next update requests in a list
* @func: actual update function to call after the grace period.
*/
struct rcu_head {
struct rcu_head *next;
void (*func)(struct rcu_head *head);
};
#define RCU_HEAD_INIT { .next = NULL, .func = NULL }
#define RCU_HEAD(head) struct rcu_head head = RCU_HEAD_INIT
#define INIT_RCU_HEAD(ptr) do { \
(ptr)->next = NULL; (ptr)->func = NULL; \
} while (0)
/* Global control variables for rcupdate callback mechanism. */
struct rcu_ctrlblk {
long cur; /* Current batch number. */
long completed; /* Number of the last completed batch */
int next_pending; /* Is the next batch already waiting? */
spinlock_t lock ____cacheline_internodealigned_in_smp;
cpumask_t cpumask; /* CPUs that need to switch in order */
/* for current batch to proceed. */
} ____cacheline_internodealigned_in_smp;
/* Is batch a before batch b ? */
static inline int rcu_batch_before(long a, long b)
{
return (a - b) < 0;
}
/* Is batch a after batch b ? */
static inline int rcu_batch_after(long a, long b)
{
return (a - b) > 0;
}
/*
* Per-CPU data for Read-Copy UPdate.
* nxtlist - new callbacks are added here
* curlist - current batch for which quiescent cycle started if any
*/
struct rcu_data {
/* 1) quiescent state handling : */
long quiescbatch; /* Batch # for grace period */
int passed_quiesc; /* User-mode/idle loop etc. */
int qs_pending; /* core waits for quiesc state */
/* 2) batch handling */
long batch; /* Batch # for current RCU batch */
struct rcu_head *nxtlist;
struct rcu_head **nxttail;
long qlen; /* # of queued callbacks */
struct rcu_head *curlist;
struct rcu_head **curtail;
struct rcu_head *donelist;
struct rcu_head **donetail;
long blimit; /* Upper limit on a processed batch */
int cpu;
struct rcu_head barrier;
#ifdef CONFIG_SMP
long last_rs_qlen; /* qlen during the last resched */
#endif
};
DECLARE_PER_CPU(struct rcu_data, rcu_data);
DECLARE_PER_CPU(struct rcu_data, rcu_bh_data);
extern struct rcu_ctrlblk rcu_ctrlblk;
extern struct rcu_ctrlblk rcu_bh_ctrlblk;
/*
* Increment the quiescent state counter.
* The counter is a bit degenerated: We do not need to know
* how many quiescent states passed, just if there was at least
* one since the start of the grace period. Thus just a flag.
*/
static inline void rcu_qsctr_inc(int cpu)
{
struct rcu_data *rdp = &per_cpu(rcu_data, cpu);
rdp->passed_quiesc = 1;
}
static inline void rcu_bh_qsctr_inc(int cpu)
{
struct rcu_data *rdp = &per_cpu(rcu_bh_data, cpu);
rdp->passed_quiesc = 1;
}
extern int rcu_pending(int cpu);
/**
* rcu_read_lock - mark the beginning of an RCU read-side critical section.
*
* When synchronize_rcu() is invoked on one CPU while other CPUs
* are within RCU read-side critical sections, then the
* synchronize_rcu() is guaranteed to block until after all the other
* CPUs exit their critical sections. Similarly, if call_rcu() is invoked
* on one CPU while other CPUs are within RCU read-side critical
* sections, invocation of the corresponding RCU callback is deferred
* until after the all the other CPUs exit their critical sections.
*
* Note, however, that RCU callbacks are permitted to run concurrently
* with RCU read-side critical sections. One way that this can happen
* is via the following sequence of events: (1) CPU 0 enters an RCU
* read-side critical section, (2) CPU 1 invokes call_rcu() to register
* an RCU callback, (3) CPU 0 exits the RCU read-side critical section,
* (4) CPU 2 enters a RCU read-side critical section, (5) the RCU
* callback is invoked. This is legal, because the RCU read-side critical
* section that was running concurrently with the call_rcu() (and which
* therefore might be referencing something that the corresponding RCU
* callback would free up) has completed before the corresponding
* RCU callback is invoked.
*
* RCU read-side critical sections may be nested. Any deferred actions
* will be deferred until the outermost RCU read-side critical section
* completes.
*
* It is illegal to block while in an RCU read-side critical section.
*/
#define rcu_read_lock() preempt_disable()
/**
* rcu_read_unlock - marks the end of an RCU read-side critical section.
*
* See rcu_read_lock() for more information.
*/
#define rcu_read_unlock() preempt_enable()
/*
* So where is rcu_write_lock()? It does not exist, as there is no
* way for writers to lock out RCU readers. This is a feature, not
* a bug -- this property is what provides RCU's performance benefits.
* Of course, writers must coordinate with each other. The normal
* spinlock primitives work well for this, but any other technique may be
* used as well. RCU does not care how the writers keep out of each
* others' way, as long as they do so.
*/
/**
* rcu_read_lock_bh - mark the beginning of a softirq-only RCU critical section
*
* This is equivalent of rcu_read_lock(), but to be used when updates
* are being done using call_rcu_bh(). Since call_rcu_bh() callbacks
* consider completion of a softirq handler to be a quiescent state,
* a process in RCU read-side critical section must be protected by
* disabling softirqs. Read-side critical sections in interrupt context
* can use just rcu_read_lock().
*
*/
#define rcu_read_lock_bh() local_bh_disable()
/*
* rcu_read_unlock_bh - marks the end of a softirq-only RCU critical section
*
* See rcu_read_lock_bh() for more information.
*/
#define rcu_read_unlock_bh() local_bh_enable()
/**
* rcu_dereference - fetch an RCU-protected pointer in an
* RCU read-side critical section. This pointer may later
* be safely dereferenced.
*
* Inserts memory barriers on architectures that require them
* (currently only the Alpha), and, more importantly, documents
* exactly which pointers are protected by RCU.
*/
#define rcu_dereference(p) ({ \
typeof(p) _________p1 = p; \
smp_read_barrier_depends(); \
(_________p1); \
})
/**
* rcu_assign_pointer - assign (publicize) a pointer to a newly
* initialized structure that will be dereferenced by RCU read-side
* critical sections. Returns the value assigned.
*
* Inserts memory barriers on architectures that require them
* (pretty much all of them other than x86), and also prevents
* the compiler from reordering the code that initializes the
* structure after the pointer assignment. More importantly, this
* call documents which pointers will be dereferenced by RCU read-side
* code.
*/
#define rcu_assign_pointer(p, v) ({ \
smp_wmb(); \
(p) = (v); \
})
/**
* synchronize_sched - block until all CPUs have exited any non-preemptive
* kernel code sequences.
*
* This means that all preempt_disable code sequences, including NMI and
* hardware-interrupt handlers, in progress on entry will have completed
* before this primitive returns. However, this does not guarantee that
* softirq handlers will have completed, since in some kernels, these
* handlers can run in process context, and can block.
*
* This primitive provides the guarantees made by the (deprecated)
* synchronize_kernel() API. In contrast, synchronize_rcu() only
* guarantees that rcu_read_lock() sections will have completed.
* In "classic RCU", these two guarantees happen to be one and
* the same, but can differ in realtime RCU implementations.
*/
#define synchronize_sched() synchronize_rcu()
extern void rcu_init(void);
extern void rcu_check_callbacks(int cpu, int user);
extern void rcu_restart_cpu(int cpu);
extern long rcu_batches_completed(void);
/* Exported interfaces */
extern void FASTCALL(call_rcu(struct rcu_head *head,
void (*func)(struct rcu_head *head)));
extern void FASTCALL(call_rcu_bh(struct rcu_head *head,
void (*func)(struct rcu_head *head)));
extern __deprecated_for_modules void synchronize_kernel(void);
extern void synchronize_rcu(void);
void synchronize_idle(void);
extern void rcu_barrier(void);
#endif /* __KERNEL__ */
#endif /* __LINUX_RCUPDATE_H */