c7087652e1
When BMDMA initialization failed or BMDMA was not available for
whatever reason, bmdma_addr was left at zero and used as an indication
that BMDMA shouldn't be used. This leads to the following problems.
p1. For BMDMA drivers which don't use traditional BMDMA register,
ata_bmdma_mode_filter() incorrectly inhibits DMA modes. Those
drivers either have to inherit from ata_sff_port_ops or clear
->mode_filter explicitly.
p2. non-BMDMA drivers call into BMDMA PRD table allocation. It
doesn't actually allocate PRD table if bmdma_addr is not
initialized but is still confusing.
p3. For BMDMA drivers which don't use traditional BMDMA register, some
methods might not be invoked as expected (e.g. bmdma_stop from
ata_sff_post_internal_cmd()).
p4. SFF drivers w/ custom DMA interface implement noop BMDMA ops
worrying libata core might call into one of them.
These problems are caused by the muddy line between SFF and BMDMA and
the assumption that all BMDMA controllers initialize bmdma_addr.
This patch fixes p1 and p2 by removing the bmdma_addr assumption and
moving prd allocation to BMDMA port start. Later patches will fix the
remaining issues.
This patch improves BMDMA initialization such that
* When BMDMA register initialization fails, falls back to PIO instead
of failing. ata_pci_bmdma_init() never fails now.
* When ata_pci_bmdma_init() falls back to PIO, it clears
ap->mwdma_mask and udma_mask instead of depending on
ata_bmdma_mode_filter(). This makes ata_bmdma_mode_filter()
unnecessary thus resolving p1.
* ata_port_start() which actually is BMDMA specific is moved to
ata_bmdma_port_start(). ata_port_start() and ata_sff_port_start()
are killed.
* ata_sff_port_start32() is moved and renamed to
ata_bmdma_port_start32().
Drivers which no longer call into PRD table allocation are...
pdc_adma, sata_inic162x, sata_qstor, sata_sx4, pata_cmd640 and all
drivers which inherit from ata_sff_port_ops.
pata_icside sets ->port_start to ATA_OP_NULL as it doesn't need PRD
but is a BMDMA controller and doesn't have custom port_start like
other such controllers.
Note that with the previous patch which makes all and only BMDMA
drivers inherit from ata_bmdma_port_ops, this change doesn't break
drivers which need PRD table.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
262 lines
6.8 KiB
C
262 lines
6.8 KiB
C
/*
|
|
* sata_uli.c - ULi Electronics SATA
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; see the file COPYING. If not, write to
|
|
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*
|
|
* libata documentation is available via 'make {ps|pdf}docs',
|
|
* as Documentation/DocBook/libata.*
|
|
*
|
|
* Hardware documentation available under NDA.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/gfp.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/device.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
|
|
#define DRV_NAME "sata_uli"
|
|
#define DRV_VERSION "1.3"
|
|
|
|
enum {
|
|
uli_5289 = 0,
|
|
uli_5287 = 1,
|
|
uli_5281 = 2,
|
|
|
|
uli_max_ports = 4,
|
|
|
|
/* PCI configuration registers */
|
|
ULI5287_BASE = 0x90, /* sata0 phy SCR registers */
|
|
ULI5287_OFFS = 0x10, /* offset from sata0->sata1 phy regs */
|
|
ULI5281_BASE = 0x60, /* sata0 phy SCR registers */
|
|
ULI5281_OFFS = 0x60, /* offset from sata0->sata1 phy regs */
|
|
};
|
|
|
|
struct uli_priv {
|
|
unsigned int scr_cfg_addr[uli_max_ports];
|
|
};
|
|
|
|
static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
|
|
static int uli_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
|
|
static int uli_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
|
|
|
|
static const struct pci_device_id uli_pci_tbl[] = {
|
|
{ PCI_VDEVICE(AL, 0x5289), uli_5289 },
|
|
{ PCI_VDEVICE(AL, 0x5287), uli_5287 },
|
|
{ PCI_VDEVICE(AL, 0x5281), uli_5281 },
|
|
|
|
{ } /* terminate list */
|
|
};
|
|
|
|
static struct pci_driver uli_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = uli_pci_tbl,
|
|
.probe = uli_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
};
|
|
|
|
static struct scsi_host_template uli_sht = {
|
|
ATA_BMDMA_SHT(DRV_NAME),
|
|
};
|
|
|
|
static struct ata_port_operations uli_ops = {
|
|
.inherits = &ata_bmdma_port_ops,
|
|
.scr_read = uli_scr_read,
|
|
.scr_write = uli_scr_write,
|
|
.hardreset = ATA_OP_NULL,
|
|
};
|
|
|
|
static const struct ata_port_info uli_port_info = {
|
|
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
|
|
ATA_FLAG_IGN_SIMPLEX,
|
|
.pio_mask = ATA_PIO4,
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &uli_ops,
|
|
};
|
|
|
|
|
|
MODULE_AUTHOR("Peer Chen");
|
|
MODULE_DESCRIPTION("low-level driver for ULi Electronics SATA controller");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, uli_pci_tbl);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
static unsigned int get_scr_cfg_addr(struct ata_port *ap, unsigned int sc_reg)
|
|
{
|
|
struct uli_priv *hpriv = ap->host->private_data;
|
|
return hpriv->scr_cfg_addr[ap->port_no] + (4 * sc_reg);
|
|
}
|
|
|
|
static u32 uli_scr_cfg_read(struct ata_link *link, unsigned int sc_reg)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(link->ap->host->dev);
|
|
unsigned int cfg_addr = get_scr_cfg_addr(link->ap, sc_reg);
|
|
u32 val;
|
|
|
|
pci_read_config_dword(pdev, cfg_addr, &val);
|
|
return val;
|
|
}
|
|
|
|
static void uli_scr_cfg_write(struct ata_link *link, unsigned int scr, u32 val)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(link->ap->host->dev);
|
|
unsigned int cfg_addr = get_scr_cfg_addr(link->ap, scr);
|
|
|
|
pci_write_config_dword(pdev, cfg_addr, val);
|
|
}
|
|
|
|
static int uli_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val)
|
|
{
|
|
if (sc_reg > SCR_CONTROL)
|
|
return -EINVAL;
|
|
|
|
*val = uli_scr_cfg_read(link, sc_reg);
|
|
return 0;
|
|
}
|
|
|
|
static int uli_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
|
|
{
|
|
if (sc_reg > SCR_CONTROL) //SCR_CONTROL=2, SCR_ERROR=1, SCR_STATUS=0
|
|
return -EINVAL;
|
|
|
|
uli_scr_cfg_write(link, sc_reg, val);
|
|
return 0;
|
|
}
|
|
|
|
static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
static int printed_version;
|
|
const struct ata_port_info *ppi[] = { &uli_port_info, NULL };
|
|
unsigned int board_idx = (unsigned int) ent->driver_data;
|
|
struct ata_host *host;
|
|
struct uli_priv *hpriv;
|
|
void __iomem * const *iomap;
|
|
struct ata_ioports *ioaddr;
|
|
int n_ports, rc;
|
|
|
|
if (!printed_version++)
|
|
dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
|
|
|
|
rc = pcim_enable_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
n_ports = 2;
|
|
if (board_idx == uli_5287)
|
|
n_ports = 4;
|
|
|
|
/* allocate the host */
|
|
host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
|
|
if (!host)
|
|
return -ENOMEM;
|
|
|
|
hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
|
|
if (!hpriv)
|
|
return -ENOMEM;
|
|
host->private_data = hpriv;
|
|
|
|
/* the first two ports are standard SFF */
|
|
rc = ata_pci_sff_init_host(host);
|
|
if (rc)
|
|
return rc;
|
|
|
|
ata_pci_bmdma_init(host);
|
|
|
|
iomap = host->iomap;
|
|
|
|
switch (board_idx) {
|
|
case uli_5287:
|
|
/* If there are four, the last two live right after
|
|
* the standard SFF ports.
|
|
*/
|
|
hpriv->scr_cfg_addr[0] = ULI5287_BASE;
|
|
hpriv->scr_cfg_addr[1] = ULI5287_BASE + ULI5287_OFFS;
|
|
|
|
ioaddr = &host->ports[2]->ioaddr;
|
|
ioaddr->cmd_addr = iomap[0] + 8;
|
|
ioaddr->altstatus_addr =
|
|
ioaddr->ctl_addr = (void __iomem *)
|
|
((unsigned long)iomap[1] | ATA_PCI_CTL_OFS) + 4;
|
|
ioaddr->bmdma_addr = iomap[4] + 16;
|
|
hpriv->scr_cfg_addr[2] = ULI5287_BASE + ULI5287_OFFS*4;
|
|
ata_sff_std_ports(ioaddr);
|
|
|
|
ata_port_desc(host->ports[2],
|
|
"cmd 0x%llx ctl 0x%llx bmdma 0x%llx",
|
|
(unsigned long long)pci_resource_start(pdev, 0) + 8,
|
|
((unsigned long long)pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS) + 4,
|
|
(unsigned long long)pci_resource_start(pdev, 4) + 16);
|
|
|
|
ioaddr = &host->ports[3]->ioaddr;
|
|
ioaddr->cmd_addr = iomap[2] + 8;
|
|
ioaddr->altstatus_addr =
|
|
ioaddr->ctl_addr = (void __iomem *)
|
|
((unsigned long)iomap[3] | ATA_PCI_CTL_OFS) + 4;
|
|
ioaddr->bmdma_addr = iomap[4] + 24;
|
|
hpriv->scr_cfg_addr[3] = ULI5287_BASE + ULI5287_OFFS*5;
|
|
ata_sff_std_ports(ioaddr);
|
|
|
|
ata_port_desc(host->ports[2],
|
|
"cmd 0x%llx ctl 0x%llx bmdma 0x%llx",
|
|
(unsigned long long)pci_resource_start(pdev, 2) + 9,
|
|
((unsigned long long)pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS) + 4,
|
|
(unsigned long long)pci_resource_start(pdev, 4) + 24);
|
|
|
|
break;
|
|
|
|
case uli_5289:
|
|
hpriv->scr_cfg_addr[0] = ULI5287_BASE;
|
|
hpriv->scr_cfg_addr[1] = ULI5287_BASE + ULI5287_OFFS;
|
|
break;
|
|
|
|
case uli_5281:
|
|
hpriv->scr_cfg_addr[0] = ULI5281_BASE;
|
|
hpriv->scr_cfg_addr[1] = ULI5281_BASE + ULI5281_OFFS;
|
|
break;
|
|
|
|
default:
|
|
BUG();
|
|
break;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
pci_intx(pdev, 1);
|
|
return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
|
|
IRQF_SHARED, &uli_sht);
|
|
}
|
|
|
|
static int __init uli_init(void)
|
|
{
|
|
return pci_register_driver(&uli_pci_driver);
|
|
}
|
|
|
|
static void __exit uli_exit(void)
|
|
{
|
|
pci_unregister_driver(&uli_pci_driver);
|
|
}
|
|
|
|
|
|
module_init(uli_init);
|
|
module_exit(uli_exit);
|