b24413180f
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
483 lines
13 KiB
C
483 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
||
/*
|
||
* linux/arch/alpha/kernel/core_tsunami.c
|
||
*
|
||
* Based on code written by David A. Rusling (david.rusling@reo.mts.dec.com).
|
||
*
|
||
* Code common to all TSUNAMI core logic chips.
|
||
*/
|
||
|
||
#define __EXTERN_INLINE inline
|
||
#include <asm/io.h>
|
||
#include <asm/core_tsunami.h>
|
||
#undef __EXTERN_INLINE
|
||
|
||
#include <linux/module.h>
|
||
#include <linux/types.h>
|
||
#include <linux/pci.h>
|
||
#include <linux/sched.h>
|
||
#include <linux/init.h>
|
||
#include <linux/bootmem.h>
|
||
|
||
#include <asm/ptrace.h>
|
||
#include <asm/smp.h>
|
||
#include <asm/vga.h>
|
||
|
||
#include "proto.h"
|
||
#include "pci_impl.h"
|
||
|
||
/* Save Tsunami configuration data as the console had it set up. */
|
||
|
||
struct
|
||
{
|
||
unsigned long wsba[4];
|
||
unsigned long wsm[4];
|
||
unsigned long tba[4];
|
||
} saved_config[2] __attribute__((common));
|
||
|
||
/*
|
||
* NOTE: Herein lie back-to-back mb instructions. They are magic.
|
||
* One plausible explanation is that the I/O controller does not properly
|
||
* handle the system transaction. Another involves timing. Ho hum.
|
||
*/
|
||
|
||
/*
|
||
* BIOS32-style PCI interface:
|
||
*/
|
||
|
||
#define DEBUG_CONFIG 0
|
||
|
||
#if DEBUG_CONFIG
|
||
# define DBG_CFG(args) printk args
|
||
#else
|
||
# define DBG_CFG(args)
|
||
#endif
|
||
|
||
|
||
/*
|
||
* Given a bus, device, and function number, compute resulting
|
||
* configuration space address
|
||
* accordingly. It is therefore not safe to have concurrent
|
||
* invocations to configuration space access routines, but there
|
||
* really shouldn't be any need for this.
|
||
*
|
||
* Note that all config space accesses use Type 1 address format.
|
||
*
|
||
* Note also that type 1 is determined by non-zero bus number.
|
||
*
|
||
* Type 1:
|
||
*
|
||
* 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
|
||
* 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
|
||
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|
||
* | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
|
||
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|
||
*
|
||
* 31:24 reserved
|
||
* 23:16 bus number (8 bits = 128 possible buses)
|
||
* 15:11 Device number (5 bits)
|
||
* 10:8 function number
|
||
* 7:2 register number
|
||
*
|
||
* Notes:
|
||
* The function number selects which function of a multi-function device
|
||
* (e.g., SCSI and Ethernet).
|
||
*
|
||
* The register selects a DWORD (32 bit) register offset. Hence it
|
||
* doesn't get shifted by 2 bits as we want to "drop" the bottom two
|
||
* bits.
|
||
*/
|
||
|
||
static int
|
||
mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
|
||
unsigned long *pci_addr, unsigned char *type1)
|
||
{
|
||
struct pci_controller *hose = pbus->sysdata;
|
||
unsigned long addr;
|
||
u8 bus = pbus->number;
|
||
|
||
DBG_CFG(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x, "
|
||
"pci_addr=0x%p, type1=0x%p)\n",
|
||
bus, device_fn, where, pci_addr, type1));
|
||
|
||
if (!pbus->parent) /* No parent means peer PCI bus. */
|
||
bus = 0;
|
||
*type1 = (bus != 0);
|
||
|
||
addr = (bus << 16) | (device_fn << 8) | where;
|
||
addr |= hose->config_space_base;
|
||
|
||
*pci_addr = addr;
|
||
DBG_CFG(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
|
||
return 0;
|
||
}
|
||
|
||
static int
|
||
tsunami_read_config(struct pci_bus *bus, unsigned int devfn, int where,
|
||
int size, u32 *value)
|
||
{
|
||
unsigned long addr;
|
||
unsigned char type1;
|
||
|
||
if (mk_conf_addr(bus, devfn, where, &addr, &type1))
|
||
return PCIBIOS_DEVICE_NOT_FOUND;
|
||
|
||
switch (size) {
|
||
case 1:
|
||
*value = __kernel_ldbu(*(vucp)addr);
|
||
break;
|
||
case 2:
|
||
*value = __kernel_ldwu(*(vusp)addr);
|
||
break;
|
||
case 4:
|
||
*value = *(vuip)addr;
|
||
break;
|
||
}
|
||
|
||
return PCIBIOS_SUCCESSFUL;
|
||
}
|
||
|
||
static int
|
||
tsunami_write_config(struct pci_bus *bus, unsigned int devfn, int where,
|
||
int size, u32 value)
|
||
{
|
||
unsigned long addr;
|
||
unsigned char type1;
|
||
|
||
if (mk_conf_addr(bus, devfn, where, &addr, &type1))
|
||
return PCIBIOS_DEVICE_NOT_FOUND;
|
||
|
||
switch (size) {
|
||
case 1:
|
||
__kernel_stb(value, *(vucp)addr);
|
||
mb();
|
||
__kernel_ldbu(*(vucp)addr);
|
||
break;
|
||
case 2:
|
||
__kernel_stw(value, *(vusp)addr);
|
||
mb();
|
||
__kernel_ldwu(*(vusp)addr);
|
||
break;
|
||
case 4:
|
||
*(vuip)addr = value;
|
||
mb();
|
||
*(vuip)addr;
|
||
break;
|
||
}
|
||
|
||
return PCIBIOS_SUCCESSFUL;
|
||
}
|
||
|
||
struct pci_ops tsunami_pci_ops =
|
||
{
|
||
.read = tsunami_read_config,
|
||
.write = tsunami_write_config,
|
||
};
|
||
|
||
void
|
||
tsunami_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
|
||
{
|
||
tsunami_pchip *pchip = hose->index ? TSUNAMI_pchip1 : TSUNAMI_pchip0;
|
||
volatile unsigned long *csr;
|
||
unsigned long value;
|
||
|
||
/* We can invalidate up to 8 tlb entries in a go. The flush
|
||
matches against <31:16> in the pci address. */
|
||
csr = &pchip->tlbia.csr;
|
||
if (((start ^ end) & 0xffff0000) == 0)
|
||
csr = &pchip->tlbiv.csr;
|
||
|
||
/* For TBIA, it doesn't matter what value we write. For TBI,
|
||
it's the shifted tag bits. */
|
||
value = (start & 0xffff0000) >> 12;
|
||
|
||
*csr = value;
|
||
mb();
|
||
*csr;
|
||
}
|
||
|
||
#ifdef NXM_MACHINE_CHECKS_ON_TSUNAMI
|
||
static long __init
|
||
tsunami_probe_read(volatile unsigned long *vaddr)
|
||
{
|
||
long dont_care, probe_result;
|
||
int cpu = smp_processor_id();
|
||
int s = swpipl(IPL_MCHECK - 1);
|
||
|
||
mcheck_taken(cpu) = 0;
|
||
mcheck_expected(cpu) = 1;
|
||
mb();
|
||
dont_care = *vaddr;
|
||
draina();
|
||
mcheck_expected(cpu) = 0;
|
||
probe_result = !mcheck_taken(cpu);
|
||
mcheck_taken(cpu) = 0;
|
||
setipl(s);
|
||
|
||
printk("dont_care == 0x%lx\n", dont_care);
|
||
|
||
return probe_result;
|
||
}
|
||
|
||
static long __init
|
||
tsunami_probe_write(volatile unsigned long *vaddr)
|
||
{
|
||
long true_contents, probe_result = 1;
|
||
|
||
TSUNAMI_cchip->misc.csr |= (1L << 28); /* clear NXM... */
|
||
true_contents = *vaddr;
|
||
*vaddr = 0;
|
||
draina();
|
||
if (TSUNAMI_cchip->misc.csr & (1L << 28)) {
|
||
int source = (TSUNAMI_cchip->misc.csr >> 29) & 7;
|
||
TSUNAMI_cchip->misc.csr |= (1L << 28); /* ...and unlock NXS. */
|
||
probe_result = 0;
|
||
printk("tsunami_probe_write: unit %d at 0x%016lx\n", source,
|
||
(unsigned long)vaddr);
|
||
}
|
||
if (probe_result)
|
||
*vaddr = true_contents;
|
||
return probe_result;
|
||
}
|
||
#else
|
||
#define tsunami_probe_read(ADDR) 1
|
||
#endif /* NXM_MACHINE_CHECKS_ON_TSUNAMI */
|
||
|
||
static void __init
|
||
tsunami_init_one_pchip(tsunami_pchip *pchip, int index)
|
||
{
|
||
struct pci_controller *hose;
|
||
|
||
if (tsunami_probe_read(&pchip->pctl.csr) == 0)
|
||
return;
|
||
|
||
hose = alloc_pci_controller();
|
||
if (index == 0)
|
||
pci_isa_hose = hose;
|
||
hose->io_space = alloc_resource();
|
||
hose->mem_space = alloc_resource();
|
||
|
||
/* This is for userland consumption. For some reason, the 40-bit
|
||
PIO bias that we use in the kernel through KSEG didn't work for
|
||
the page table based user mappings. So make sure we get the
|
||
43-bit PIO bias. */
|
||
hose->sparse_mem_base = 0;
|
||
hose->sparse_io_base = 0;
|
||
hose->dense_mem_base
|
||
= (TSUNAMI_MEM(index) & 0xffffffffffL) | 0x80000000000L;
|
||
hose->dense_io_base
|
||
= (TSUNAMI_IO(index) & 0xffffffffffL) | 0x80000000000L;
|
||
|
||
hose->config_space_base = TSUNAMI_CONF(index);
|
||
hose->index = index;
|
||
|
||
hose->io_space->start = TSUNAMI_IO(index) - TSUNAMI_IO_BIAS;
|
||
hose->io_space->end = hose->io_space->start + TSUNAMI_IO_SPACE - 1;
|
||
hose->io_space->name = pci_io_names[index];
|
||
hose->io_space->flags = IORESOURCE_IO;
|
||
|
||
hose->mem_space->start = TSUNAMI_MEM(index) - TSUNAMI_MEM_BIAS;
|
||
hose->mem_space->end = hose->mem_space->start + 0xffffffff;
|
||
hose->mem_space->name = pci_mem_names[index];
|
||
hose->mem_space->flags = IORESOURCE_MEM;
|
||
|
||
if (request_resource(&ioport_resource, hose->io_space) < 0)
|
||
printk(KERN_ERR "Failed to request IO on hose %d\n", index);
|
||
if (request_resource(&iomem_resource, hose->mem_space) < 0)
|
||
printk(KERN_ERR "Failed to request MEM on hose %d\n", index);
|
||
|
||
/*
|
||
* Save the existing PCI window translations. SRM will
|
||
* need them when we go to reboot.
|
||
*/
|
||
|
||
saved_config[index].wsba[0] = pchip->wsba[0].csr;
|
||
saved_config[index].wsm[0] = pchip->wsm[0].csr;
|
||
saved_config[index].tba[0] = pchip->tba[0].csr;
|
||
|
||
saved_config[index].wsba[1] = pchip->wsba[1].csr;
|
||
saved_config[index].wsm[1] = pchip->wsm[1].csr;
|
||
saved_config[index].tba[1] = pchip->tba[1].csr;
|
||
|
||
saved_config[index].wsba[2] = pchip->wsba[2].csr;
|
||
saved_config[index].wsm[2] = pchip->wsm[2].csr;
|
||
saved_config[index].tba[2] = pchip->tba[2].csr;
|
||
|
||
saved_config[index].wsba[3] = pchip->wsba[3].csr;
|
||
saved_config[index].wsm[3] = pchip->wsm[3].csr;
|
||
saved_config[index].tba[3] = pchip->tba[3].csr;
|
||
|
||
/*
|
||
* Set up the PCI to main memory translation windows.
|
||
*
|
||
* Note: Window 3 is scatter-gather only
|
||
*
|
||
* Window 0 is scatter-gather 8MB at 8MB (for isa)
|
||
* Window 1 is scatter-gather (up to) 1GB at 1GB
|
||
* Window 2 is direct access 2GB at 2GB
|
||
*
|
||
* NOTE: we need the align_entry settings for Acer devices on ES40,
|
||
* specifically floppy and IDE when memory is larger than 2GB.
|
||
*/
|
||
hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000, 0);
|
||
/* Initially set for 4 PTEs, but will be overridden to 64K for ISA. */
|
||
hose->sg_isa->align_entry = 4;
|
||
|
||
hose->sg_pci = iommu_arena_new(hose, 0x40000000,
|
||
size_for_memory(0x40000000), 0);
|
||
hose->sg_pci->align_entry = 4; /* Tsunami caches 4 PTEs at a time */
|
||
|
||
__direct_map_base = 0x80000000;
|
||
__direct_map_size = 0x80000000;
|
||
|
||
pchip->wsba[0].csr = hose->sg_isa->dma_base | 3;
|
||
pchip->wsm[0].csr = (hose->sg_isa->size - 1) & 0xfff00000;
|
||
pchip->tba[0].csr = virt_to_phys(hose->sg_isa->ptes);
|
||
|
||
pchip->wsba[1].csr = hose->sg_pci->dma_base | 3;
|
||
pchip->wsm[1].csr = (hose->sg_pci->size - 1) & 0xfff00000;
|
||
pchip->tba[1].csr = virt_to_phys(hose->sg_pci->ptes);
|
||
|
||
pchip->wsba[2].csr = 0x80000000 | 1;
|
||
pchip->wsm[2].csr = (0x80000000 - 1) & 0xfff00000;
|
||
pchip->tba[2].csr = 0;
|
||
|
||
pchip->wsba[3].csr = 0;
|
||
|
||
/* Enable the Monster Window to make DAC pci64 possible. */
|
||
pchip->pctl.csr |= pctl_m_mwin;
|
||
|
||
tsunami_pci_tbi(hose, 0, -1);
|
||
}
|
||
|
||
|
||
void __iomem *
|
||
tsunami_ioportmap(unsigned long addr)
|
||
{
|
||
FIXUP_IOADDR_VGA(addr);
|
||
return (void __iomem *)(addr + TSUNAMI_IO_BIAS);
|
||
}
|
||
|
||
void __iomem *
|
||
tsunami_ioremap(unsigned long addr, unsigned long size)
|
||
{
|
||
FIXUP_MEMADDR_VGA(addr);
|
||
return (void __iomem *)(addr + TSUNAMI_MEM_BIAS);
|
||
}
|
||
|
||
#ifndef CONFIG_ALPHA_GENERIC
|
||
EXPORT_SYMBOL(tsunami_ioportmap);
|
||
EXPORT_SYMBOL(tsunami_ioremap);
|
||
#endif
|
||
|
||
void __init
|
||
tsunami_init_arch(void)
|
||
{
|
||
#ifdef NXM_MACHINE_CHECKS_ON_TSUNAMI
|
||
unsigned long tmp;
|
||
|
||
/* Ho hum.. init_arch is called before init_IRQ, but we need to be
|
||
able to handle machine checks. So install the handler now. */
|
||
wrent(entInt, 0);
|
||
|
||
/* NXMs just don't matter to Tsunami--unless they make it
|
||
choke completely. */
|
||
tmp = (unsigned long)(TSUNAMI_cchip - 1);
|
||
printk("%s: probing bogus address: 0x%016lx\n", __func__, bogus_addr);
|
||
printk("\tprobe %s\n",
|
||
tsunami_probe_write((unsigned long *)bogus_addr)
|
||
? "succeeded" : "failed");
|
||
#endif /* NXM_MACHINE_CHECKS_ON_TSUNAMI */
|
||
|
||
#if 0
|
||
printk("%s: CChip registers:\n", __func__);
|
||
printk("%s: CSR_CSC 0x%lx\n", __func__, TSUNAMI_cchip->csc.csr);
|
||
printk("%s: CSR_MTR 0x%lx\n", __func__, TSUNAMI_cchip.mtr.csr);
|
||
printk("%s: CSR_MISC 0x%lx\n", __func__, TSUNAMI_cchip->misc.csr);
|
||
printk("%s: CSR_DIM0 0x%lx\n", __func__, TSUNAMI_cchip->dim0.csr);
|
||
printk("%s: CSR_DIM1 0x%lx\n", __func__, TSUNAMI_cchip->dim1.csr);
|
||
printk("%s: CSR_DIR0 0x%lx\n", __func__, TSUNAMI_cchip->dir0.csr);
|
||
printk("%s: CSR_DIR1 0x%lx\n", __func__, TSUNAMI_cchip->dir1.csr);
|
||
printk("%s: CSR_DRIR 0x%lx\n", __func__, TSUNAMI_cchip->drir.csr);
|
||
|
||
printk("%s: DChip registers:\n");
|
||
printk("%s: CSR_DSC 0x%lx\n", __func__, TSUNAMI_dchip->dsc.csr);
|
||
printk("%s: CSR_STR 0x%lx\n", __func__, TSUNAMI_dchip->str.csr);
|
||
printk("%s: CSR_DREV 0x%lx\n", __func__, TSUNAMI_dchip->drev.csr);
|
||
#endif
|
||
/* With multiple PCI busses, we play with I/O as physical addrs. */
|
||
ioport_resource.end = ~0UL;
|
||
|
||
/* Find how many hoses we have, and initialize them. TSUNAMI
|
||
and TYPHOON can have 2, but might only have 1 (DS10). */
|
||
|
||
tsunami_init_one_pchip(TSUNAMI_pchip0, 0);
|
||
if (TSUNAMI_cchip->csc.csr & 1L<<14)
|
||
tsunami_init_one_pchip(TSUNAMI_pchip1, 1);
|
||
|
||
/* Check for graphic console location (if any). */
|
||
find_console_vga_hose();
|
||
}
|
||
|
||
static void
|
||
tsunami_kill_one_pchip(tsunami_pchip *pchip, int index)
|
||
{
|
||
pchip->wsba[0].csr = saved_config[index].wsba[0];
|
||
pchip->wsm[0].csr = saved_config[index].wsm[0];
|
||
pchip->tba[0].csr = saved_config[index].tba[0];
|
||
|
||
pchip->wsba[1].csr = saved_config[index].wsba[1];
|
||
pchip->wsm[1].csr = saved_config[index].wsm[1];
|
||
pchip->tba[1].csr = saved_config[index].tba[1];
|
||
|
||
pchip->wsba[2].csr = saved_config[index].wsba[2];
|
||
pchip->wsm[2].csr = saved_config[index].wsm[2];
|
||
pchip->tba[2].csr = saved_config[index].tba[2];
|
||
|
||
pchip->wsba[3].csr = saved_config[index].wsba[3];
|
||
pchip->wsm[3].csr = saved_config[index].wsm[3];
|
||
pchip->tba[3].csr = saved_config[index].tba[3];
|
||
}
|
||
|
||
void
|
||
tsunami_kill_arch(int mode)
|
||
{
|
||
tsunami_kill_one_pchip(TSUNAMI_pchip0, 0);
|
||
if (TSUNAMI_cchip->csc.csr & 1L<<14)
|
||
tsunami_kill_one_pchip(TSUNAMI_pchip1, 1);
|
||
}
|
||
|
||
static inline void
|
||
tsunami_pci_clr_err_1(tsunami_pchip *pchip)
|
||
{
|
||
pchip->perror.csr;
|
||
pchip->perror.csr = 0x040;
|
||
mb();
|
||
pchip->perror.csr;
|
||
}
|
||
|
||
static inline void
|
||
tsunami_pci_clr_err(void)
|
||
{
|
||
tsunami_pci_clr_err_1(TSUNAMI_pchip0);
|
||
|
||
/* TSUNAMI and TYPHOON can have 2, but might only have 1 (DS10) */
|
||
if (TSUNAMI_cchip->csc.csr & 1L<<14)
|
||
tsunami_pci_clr_err_1(TSUNAMI_pchip1);
|
||
}
|
||
|
||
void
|
||
tsunami_machine_check(unsigned long vector, unsigned long la_ptr)
|
||
{
|
||
/* Clear error before any reporting. */
|
||
mb();
|
||
mb(); /* magic */
|
||
draina();
|
||
tsunami_pci_clr_err();
|
||
wrmces(0x7);
|
||
mb();
|
||
|
||
process_mcheck_info(vector, la_ptr, "TSUNAMI",
|
||
mcheck_expected(smp_processor_id()));
|
||
}
|