..
audio.h
bitfield.h
camera.h
V4L/DVB (8687): soc-camera: Move .power and .reset from soc_camera host to sensor driver
2008-10-12 09:36:50 -02:00
clkdev.h
[ARM] pxa: convert to clkdev and match clocks by struct device where possible
2008-11-27 12:38:23 +00:00
colibri.h
corgi.h
Revert "[ARM] pxa/corgi: remove now unused corgi_ssp.c and corgi_lcd.c"
2008-10-21 09:42:29 +08:00
debug-macro.S
dma.h
[ARM] fix xm_x2xx_defconfig build errors
2008-12-13 09:12:09 +00:00
entry-macro.S
[ARM] 5233/1: Allow PXA to have ISA IRQs numbered 0-15
2008-09-01 17:13:26 +01:00
eseries-gpio.h
eseries-irq.h
gpio.h
gumstix.h
h5000.h
[ARM] pxa: add basic support for HP iPAQ h5000
2008-12-02 14:43:50 +08:00
hardware.h
[ARM] fix xm_x2xx_defconfig build errors
2008-12-13 09:12:09 +00:00
i2c.h
[ARM] 5278/1: i2c-pxa fast mode support
2008-10-03 15:57:06 +01:00
idp.h
io.h
[ARM] Add a common typesafe __io implementation
2008-11-30 11:45:54 +00:00
irda.h
irqs.h
[ARM] pxa: fix redefinition of NR_IRQS
2008-10-17 13:19:08 +01:00
littleton.h
[ARM] pxa/littleton: add support for SPI-based TDO24M LCD panel driver
2008-09-23 22:04:38 +01:00
lpd270.h
lubbock.h
magician.h
mainstone.h
memory.h
[ARM] Ensure that both MAX_DMA_ADDRESS and ISA_DMA_THRESHOLD are defined
2008-11-30 13:26:47 +00:00
mfp-pxa2xx.h
mfp-pxa3xx.h
mfp-pxa25x.h
[ARM] pxa: add support for additional GPIOs on PXA26x
2008-12-02 14:42:37 +08:00
mfp-pxa27x.h
[ARM] pxa: add missing GPIOs definitions
2008-12-02 14:42:41 +08:00
mfp-pxa300.h
mfp-pxa320.h
[ARM] pxa: fix incorrect definitions of SSP3 on pxa320
2008-08-26 17:02:00 +01:00
mfp-pxa930.h
mfp.h
[ARM] pxa: better MFP low power state support for pxa25x/pxa27x
2008-09-26 23:43:20 +01:00
mioa701.h
[ARM] pxa/MioA701: discovered new gpio definitions.
2008-12-02 14:43:48 +08:00
mmc.h
mtd-xip.h
[ARM] 5191/1: ARM: remove CVS keywords
2008-08-16 20:01:18 +01:00
ohci.h
[ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers
2008-10-07 19:12:57 +01:00
palmtx.h
palmz72.h
[ARM] 5239/1: Palm Zire 72 power management support
2008-10-09 15:12:07 +01:00
pcm027.h
pcm990_baseboard.h
pm.h
[ARM] pxa: Allow platforms to override PSPR setting
2008-09-09 16:32:52 +01:00
poodle.h
[ARM] pxa/poodle: prepare scoop for the generic GPIO API
2008-09-23 22:04:38 +01:00
pxa2xx_spi.h
pxa2xx-gpio.h
[ARM] pxa: removed unused declarations of pxa_gpio_* in hardware.h
2008-12-02 14:42:37 +08:00
pxa2xx-regs.h
[ARM] pxa: cpufreq-pxa2xx: sdram_rows detection support
2008-12-02 14:43:47 +08:00
pxa3xx_nand.h
[MTD] [NAND] pxa3xx_nand: moved some helper variables out from platform data
2008-09-01 21:38:34 +01:00
pxa3xx-regs.h
[ARM] pxa: add missing ACCR bit definitions to pxa3xx-regs.h
2008-10-07 19:12:59 +01:00
pxa25x-udc.h
pxa27x_keypad.h
pxa27x-udc.h
pxa-regs.h
[ARM] pxa: include <mach/hardware.h> in pxa-regs.h
2008-12-02 14:42:39 +08:00
pxafb.h
pxafb: introduce LCD_TYPE_MASK and use it.
2008-11-11 21:45:57 +08:00
regs-ac97.h
[ARM] pxa: move AC97 register definitions into dedicated regs-ac97.h
2008-12-02 14:42:39 +08:00
regs-lcd.h
regs-ssp.h
regs-uart.h
[ARM] pxa: move UART register definitions into dedicated regs-uart.h
2008-12-02 14:42:38 +08:00
reset.h
[ARM] 5300/1: fixup spitz reset during boot
2008-10-11 09:52:38 +01:00
sharpsl.h
[ARM] corgi_lcd: fix simultaneous compilation with corgi_bl
2008-10-29 11:45:37 +08:00
spitz.h
[ARM] pxa/spitz: fix unbalance parenthesis in header file spitz.h
2008-10-21 22:45:57 +08:00
ssp.h
[ARM] 5224/2: PXA SSP: Introduce register accessors
2008-09-09 16:32:52 +01:00
system.h
timex.h
tosa_bt.h
tosa.h
backlight: add support for Sharp SL-6000 LCD and backlight drivers
2008-10-21 00:19:49 +01:00
trizeps4.h
[ARM] 5204/1: Trizeps4 SOM update
2008-10-01 22:33:11 +01:00
udc.h
uncompress.h
[ARM] pxa: move UART register definitions into dedicated regs-uart.h
2008-12-02 14:42:38 +08:00
viper.h
Basic support for the Arcom/Eurotech Viper SBC.
2008-09-09 17:41:46 +02:00
vmalloc.h
zylonite.h
misc: replace remaining __FUNCTION__ with __func__
2008-10-20 16:17:42 -07:00