kernel-ark/arch/arm/mach-iop3xx/iop331-setup.c
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

178 lines
4.0 KiB
C

/*
* linux/arch/arm/mach-iop3xx/iop331-setup.c
*
* Author: Dave Jiang (dave.jiang@intel.com)
* Copyright (C) 2004 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/config.h>
#include <linux/init.h>
#include <linux/major.h>
#include <linux/fs.h>
#include <linux/device.h>
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_core.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/mach/map.h>
#include <asm/setup.h>
#include <asm/system.h>
#include <asm/memory.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#define IOP331_UART_XTAL 33334000
/*
* Standard IO mapping for all IOP331 based systems
*/
static struct map_desc iop331_std_desc[] __initdata = {
/* virtual physical length type */
/* mem mapped registers */
{ IOP331_VIRT_MEM_BASE, IOP331_PHYS_MEM_BASE, 0x00002000, MT_DEVICE },
/* PCI IO space */
{ IOP331_PCI_LOWER_IO_VA, IOP331_PCI_LOWER_IO_PA, IOP331_PCI_IO_WINDOW_SIZE, MT_DEVICE }
};
static struct uart_port iop331_serial_ports[] = {
{
.membase = (char*)(IOP331_UART0_VIRT),
.mapbase = (IOP331_UART0_PHYS),
.irq = IRQ_IOP331_UART0,
.flags = UPF_SKIP_TEST,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = IOP331_UART_XTAL,
.line = 0,
.type = PORT_XSCALE,
.fifosize = 32
} , {
.membase = (char*)(IOP331_UART1_VIRT),
.mapbase = (IOP331_UART1_PHYS),
.irq = IRQ_IOP331_UART1,
.flags = UPF_SKIP_TEST,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = IOP331_UART_XTAL,
.line = 1,
.type = PORT_XSCALE,
.fifosize = 32
}
};
static struct resource iop33x_i2c_0_resources[] = {
[0] = {
.start = 0xfffff680,
.end = 0xfffff698,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_IOP331_I2C_0,
.end = IRQ_IOP331_I2C_0,
.flags = IORESOURCE_IRQ
}
};
static struct resource iop33x_i2c_1_resources[] = {
[0] = {
.start = 0xfffff6a0,
.end = 0xfffff6b8,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_IOP331_I2C_1,
.end = IRQ_IOP331_I2C_1,
.flags = IORESOURCE_IRQ
}
};
static struct platform_device iop33x_i2c_0_controller = {
.name = "IOP3xx-I2C",
.id = 0,
.num_resources = 2,
.resource = iop33x_i2c_0_resources
};
static struct platform_device iop33x_i2c_1_controller = {
.name = "IOP3xx-I2C",
.id = 1,
.num_resources = 2,
.resource = iop33x_i2c_1_resources
};
static struct platform_device *iop33x_devices[] __initdata = {
&iop33x_i2c_0_controller,
&iop33x_i2c_1_controller
};
void __init iop33x_init(void)
{
if(iop_is_331())
{
platform_add_devices(iop33x_devices,
ARRAY_SIZE(iop33x_devices));
}
}
void __init iop331_map_io(void)
{
iotable_init(iop331_std_desc, ARRAY_SIZE(iop331_std_desc));
early_serial_setup(&iop331_serial_ports[0]);
early_serial_setup(&iop331_serial_ports[1]);
}
#ifdef CONFIG_ARCH_IOP331
extern void iop331_init_irq(void);
extern struct sys_timer iop331_timer;
#endif
#ifdef CONFIG_ARCH_IQ80331
extern void iq80331_map_io(void);
#endif
#ifdef CONFIG_MACH_IQ80332
extern void iq80332_map_io(void);
#endif
#if defined(CONFIG_ARCH_IQ80331)
MACHINE_START(IQ80331, "Intel IQ80331")
MAINTAINER("Intel Corp.")
BOOT_MEM(PHYS_OFFSET, 0xfefff000, 0xfffff000) // virtual, physical
//BOOT_MEM(PHYS_OFFSET, IOP331_UART0_VIRT, IOP331_UART0_PHYS)
MAPIO(iq80331_map_io)
INITIRQ(iop331_init_irq)
.timer = &iop331_timer,
BOOT_PARAMS(0x0100)
INIT_MACHINE(iop33x_init)
MACHINE_END
#elif defined(CONFIG_MACH_IQ80332)
MACHINE_START(IQ80332, "Intel IQ80332")
MAINTAINER("Intel Corp.")
BOOT_MEM(PHYS_OFFSET, 0xfefff000, 0xfffff000) // virtual, physical
//BOOT_MEM(PHYS_OFFSET, IOP331_UART0_VIRT, IOP331_UART0_PHYS)
MAPIO(iq80332_map_io)
INITIRQ(iop331_init_irq)
.timer = &iop331_timer,
BOOT_PARAMS(0x0100)
INIT_MACHINE(iop33x_init)
MACHINE_END
#else
#error No machine descriptor defined for this IOP3XX implementation
#endif