kernel-ark/arch/m68k/q40/config.c
David Howells 40220c1a19 IRQ: Use the new typedef for interrupt handler function pointers
Use the new typedef for interrupt handler function pointers rather than
actually spelling out the full thing each time.  This was scripted with the
following small shell script:

#!/bin/sh
egrep -nHrl -e 'irqreturn_t[ 	]*[(][*]' $* |
while read i
do
    echo $i
    perl -pi -e 's/irqreturn_t\s*[(]\s*[*]\s*([_a-zA-Z0-9]*)\s*[)]\s*[(]\s*int\s*,\s*void\s*[*]\s*[)]/irq_handler_t \1/g' $i || exit $?
done

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-10-09 12:19:47 +01:00

347 lines
7.8 KiB
C

/*
* arch/m68k/q40/config.c
*
* Copyright (C) 1999 Richard Zidlicky
*
* originally based on:
*
* linux/bvme/config.c
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file README.legal in the main directory of this archive
* for more details.
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/tty.h>
#include <linux/console.h>
#include <linux/linkage.h>
#include <linux/init.h>
#include <linux/major.h>
#include <linux/serial_reg.h>
#include <linux/rtc.h>
#include <linux/vt_kern.h>
#include <asm/io.h>
#include <asm/rtc.h>
#include <asm/bootinfo.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/setup.h>
#include <asm/irq.h>
#include <asm/traps.h>
#include <asm/machdep.h>
#include <asm/q40_master.h>
extern irqreturn_t q40_process_int (int level, struct pt_regs *regs);
extern void q40_init_IRQ (void);
static void q40_get_model(char *model);
static int q40_get_hardware_list(char *buffer);
extern void q40_sched_init(irq_handler_t handler);
extern unsigned long q40_gettimeoffset (void);
extern int q40_hwclk (int, struct rtc_time *);
extern unsigned int q40_get_ss (void);
extern int q40_set_clock_mmss (unsigned long);
static int q40_get_rtc_pll(struct rtc_pll_info *pll);
static int q40_set_rtc_pll(struct rtc_pll_info *pll);
extern void q40_reset (void);
void q40_halt(void);
extern void q40_waitbut(void);
void q40_set_vectors (void);
extern void q40_mksound(unsigned int /*freq*/, unsigned int /*ticks*/ );
extern char m68k_debug_device[];
static void q40_mem_console_write(struct console *co, const char *b,
unsigned int count);
extern int ql_ticks;
static struct console q40_console_driver = {
.name = "debug",
.flags = CON_PRINTBUFFER,
.index = -1,
};
/* early debugging function:*/
extern char *q40_mem_cptr; /*=(char *)0xff020000;*/
static int _cpleft;
static void q40_mem_console_write(struct console *co, const char *s,
unsigned int count)
{
char *p=(char *)s;
if (count<_cpleft)
while (count-- >0){
*q40_mem_cptr=*p++;
q40_mem_cptr+=4;
_cpleft--;
}
}
#if 0
void printq40(char *str)
{
int l=strlen(str);
char *p=q40_mem_cptr;
while (l-- >0 && _cpleft-- >0)
{
*p=*str++;
p+=4;
}
q40_mem_cptr=p;
}
#endif
static int halted=0;
#ifdef CONFIG_HEARTBEAT
static void q40_heartbeat(int on)
{
if (halted) return;
if (on)
Q40_LED_ON();
else
Q40_LED_OFF();
}
#endif
void q40_reset(void)
{
halted=1;
printk ("\n\n*******************************************\n"
"Called q40_reset : press the RESET button!! \n"
"*******************************************\n");
Q40_LED_ON();
while(1) ;
}
void q40_halt(void)
{
halted=1;
printk ("\n\n*******************\n"
" Called q40_halt\n"
"*******************\n");
Q40_LED_ON();
while(1) ;
}
static void q40_get_model(char *model)
{
sprintf(model, "Q40");
}
/* No hardware options on Q40? */
static int q40_get_hardware_list(char *buffer)
{
*buffer = '\0';
return 0;
}
static unsigned int serports[]={0x3f8,0x2f8,0x3e8,0x2e8,0};
void q40_disable_irqs(void)
{
unsigned i,j;
j=0;
while((i=serports[j++])) outb(0,i+UART_IER);
master_outb(0,EXT_ENABLE_REG);
master_outb(0,KEY_IRQ_ENABLE_REG);
}
void __init config_q40(void)
{
mach_sched_init = q40_sched_init;
mach_init_IRQ = q40_init_IRQ;
mach_gettimeoffset = q40_gettimeoffset;
mach_hwclk = q40_hwclk;
mach_get_ss = q40_get_ss;
mach_get_rtc_pll = q40_get_rtc_pll;
mach_set_rtc_pll = q40_set_rtc_pll;
mach_set_clock_mmss = q40_set_clock_mmss;
mach_reset = q40_reset;
mach_get_model = q40_get_model;
mach_get_hardware_list = q40_get_hardware_list;
#if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
mach_beep = q40_mksound;
#endif
#ifdef CONFIG_HEARTBEAT
mach_heartbeat = q40_heartbeat;
#endif
mach_halt = q40_halt;
/* disable a few things that SMSQ might have left enabled */
q40_disable_irqs();
/* no DMA at all, but ide-scsi requires it.. make sure
* all physical RAM fits into the boundary - otherwise
* allocator may play costly and useless tricks */
mach_max_dma_address = 1024*1024*1024;
/* useful for early debugging stages - writes kernel messages into SRAM */
if (!strncmp( m68k_debug_device,"mem",3 ))
{
/*printk("using NVRAM debug, q40_mem_cptr=%p\n",q40_mem_cptr);*/
_cpleft=2000-((long)q40_mem_cptr-0xff020000)/4;
q40_console_driver.write = q40_mem_console_write;
register_console(&q40_console_driver);
}
}
int q40_parse_bootinfo(const struct bi_record *rec)
{
return 1;
}
static inline unsigned char bcd2bin (unsigned char b)
{
return ((b>>4)*10 + (b&15));
}
static inline unsigned char bin2bcd (unsigned char b)
{
return (((b/10)*16) + (b%10));
}
unsigned long q40_gettimeoffset (void)
{
return 5000*(ql_ticks!=0);
}
/*
* Looks like op is non-zero for setting the clock, and zero for
* reading the clock.
*
* struct hwclk_time {
* unsigned sec; 0..59
* unsigned min; 0..59
* unsigned hour; 0..23
* unsigned day; 1..31
* unsigned mon; 0..11
* unsigned year; 00...
* int wday; 0..6, 0 is Sunday, -1 means unknown/don't set
* };
*/
int q40_hwclk(int op, struct rtc_time *t)
{
if (op)
{ /* Write.... */
Q40_RTC_CTRL |= Q40_RTC_WRITE;
Q40_RTC_SECS = bin2bcd(t->tm_sec);
Q40_RTC_MINS = bin2bcd(t->tm_min);
Q40_RTC_HOUR = bin2bcd(t->tm_hour);
Q40_RTC_DATE = bin2bcd(t->tm_mday);
Q40_RTC_MNTH = bin2bcd(t->tm_mon + 1);
Q40_RTC_YEAR = bin2bcd(t->tm_year%100);
if (t->tm_wday >= 0)
Q40_RTC_DOW = bin2bcd(t->tm_wday+1);
Q40_RTC_CTRL &= ~(Q40_RTC_WRITE);
}
else
{ /* Read.... */
Q40_RTC_CTRL |= Q40_RTC_READ;
t->tm_year = bcd2bin (Q40_RTC_YEAR);
t->tm_mon = bcd2bin (Q40_RTC_MNTH)-1;
t->tm_mday = bcd2bin (Q40_RTC_DATE);
t->tm_hour = bcd2bin (Q40_RTC_HOUR);
t->tm_min = bcd2bin (Q40_RTC_MINS);
t->tm_sec = bcd2bin (Q40_RTC_SECS);
Q40_RTC_CTRL &= ~(Q40_RTC_READ);
if (t->tm_year < 70)
t->tm_year += 100;
t->tm_wday = bcd2bin(Q40_RTC_DOW)-1;
}
return 0;
}
unsigned int q40_get_ss(void)
{
return bcd2bin(Q40_RTC_SECS);
}
/*
* Set the minutes and seconds from seconds value 'nowtime'. Fail if
* clock is out by > 30 minutes. Logic lifted from atari code.
*/
int q40_set_clock_mmss (unsigned long nowtime)
{
int retval = 0;
short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
int rtc_minutes;
rtc_minutes = bcd2bin (Q40_RTC_MINS);
if ((rtc_minutes < real_minutes
? real_minutes - rtc_minutes
: rtc_minutes - real_minutes) < 30)
{
Q40_RTC_CTRL |= Q40_RTC_WRITE;
Q40_RTC_MINS = bin2bcd(real_minutes);
Q40_RTC_SECS = bin2bcd(real_seconds);
Q40_RTC_CTRL &= ~(Q40_RTC_WRITE);
}
else
retval = -1;
return retval;
}
/* get and set PLL calibration of RTC clock */
#define Q40_RTC_PLL_MASK ((1<<5)-1)
#define Q40_RTC_PLL_SIGN (1<<5)
static int q40_get_rtc_pll(struct rtc_pll_info *pll)
{
int tmp=Q40_RTC_CTRL;
pll->pll_value = tmp & Q40_RTC_PLL_MASK;
if (tmp & Q40_RTC_PLL_SIGN)
pll->pll_value = -pll->pll_value;
pll->pll_max=31;
pll->pll_min=-31;
pll->pll_posmult=512;
pll->pll_negmult=256;
pll->pll_clock=125829120;
return 0;
}
static int q40_set_rtc_pll(struct rtc_pll_info *pll)
{
if (!pll->pll_ctrl){
/* the docs are a bit unclear so I am doublesetting */
/* RTC_WRITE here ... */
int tmp = (pll->pll_value & 31) | (pll->pll_value<0 ? 32 : 0) |
Q40_RTC_WRITE;
Q40_RTC_CTRL |= Q40_RTC_WRITE;
Q40_RTC_CTRL = tmp;
Q40_RTC_CTRL &= ~(Q40_RTC_WRITE);
return 0;
} else
return -EINVAL;
}