kernel-ark/include/asm-arm/arch-rpc/acornfb.h
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

141 lines
3.3 KiB
C

/*
* linux/include/asm-arm/arch-rpc/acornfb.h
*
* Copyright (C) 1999 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* AcornFB architecture specific code
*/
#define acornfb_bandwidth(var) ((var)->pixclock * 8 / (var)->bits_per_pixel)
static inline int
acornfb_valid_pixrate(struct fb_var_screeninfo *var)
{
u_long limit;
if (!var->pixclock)
return 0;
/*
* Limits below are taken from RISC OS bandwidthlimit file
*/
if (current_par.using_vram) {
if (current_par.vram_half_sam == 2048)
limit = 6578;
else
limit = 13157;
} else {
limit = 26315;
}
return acornfb_bandwidth(var) >= limit;
}
/*
* Try to find the best PLL parameters for the pixel clock.
* This algorithm seems to give best predictable results,
* and produces the same values as detailed in the VIDC20
* data sheet.
*/
static inline u_int
acornfb_vidc20_find_pll(u_int pixclk)
{
u_int r, best_r = 2, best_v = 2;
int best_d = 0x7fffffff;
for (r = 2; r <= 32; r++) {
u_int rr, v, p;
int d;
rr = 41667 * r;
v = (rr + pixclk / 2) / pixclk;
if (v > 32 || v < 2)
continue;
p = (rr + v / 2) / v;
d = pixclk - p;
if (d < 0)
d = -d;
if (d < best_d) {
best_d = d;
best_v = v - 1;
best_r = r - 1;
}
if (d == 0)
break;
}
return best_v << 8 | best_r;
}
static inline void
acornfb_vidc20_find_rates(struct vidc_timing *vidc,
struct fb_var_screeninfo *var)
{
u_int div;
/* Select pixel-clock divisor to keep PLL in range */
div = var->pixclock / 9090; /*9921*/
/* Limit divisor */
if (div == 0)
div = 1;
if (div > 8)
div = 8;
/* Encode divisor to VIDC20 setting */
switch (div) {
case 1: vidc->control |= VIDC20_CTRL_PIX_CK; break;
case 2: vidc->control |= VIDC20_CTRL_PIX_CK2; break;
case 3: vidc->control |= VIDC20_CTRL_PIX_CK3; break;
case 4: vidc->control |= VIDC20_CTRL_PIX_CK4; break;
case 5: vidc->control |= VIDC20_CTRL_PIX_CK5; break;
case 6: vidc->control |= VIDC20_CTRL_PIX_CK6; break;
case 7: vidc->control |= VIDC20_CTRL_PIX_CK7; break;
case 8: vidc->control |= VIDC20_CTRL_PIX_CK8; break;
}
/*
* With VRAM, the FIFO can be set to the highest possible setting
* because there are no latency considerations for other memory
* accesses. However, in 64 bit bus mode the FIFO preload value
* must not be set to VIDC20_CTRL_FIFO_28 because this will let
* the FIFO overflow. See VIDC20 manual page 33 (6.0 Setting the
* FIFO preload value).
*/
if (current_par.using_vram) {
if (current_par.vram_half_sam == 2048)
vidc->control |= VIDC20_CTRL_FIFO_24;
else
vidc->control |= VIDC20_CTRL_FIFO_28;
} else {
unsigned long bandwidth = acornfb_bandwidth(var);
/* Encode bandwidth as VIDC20 setting */
if (bandwidth > 33334) /* < 30.0MB/s */
vidc->control |= VIDC20_CTRL_FIFO_16;
else if (bandwidth > 26666) /* < 37.5MB/s */
vidc->control |= VIDC20_CTRL_FIFO_20;
else if (bandwidth > 22222) /* < 45.0MB/s */
vidc->control |= VIDC20_CTRL_FIFO_24;
else /* > 45.0MB/s */
vidc->control |= VIDC20_CTRL_FIFO_28;
}
/* Find the PLL values */
vidc->pll_ctl = acornfb_vidc20_find_pll(var->pixclock / div);
}
#define acornfb_default_control() (VIDC20_CTRL_PIX_VCLK)
#define acornfb_default_econtrol() (VIDC20_ECTL_DAC | VIDC20_ECTL_REG(3))