Uwe Kleine-König 5f6878b0d2 ARM: 6323/1: cam60: don't use __init for cam60_spi_{flash_platform_data,partitions} ... From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 12/19] ARM: cam60: don't use __init for cam60_spi_{flash_platform_data,partitions} Date: Thu, 5 Aug 2010 16:08:46 +0200 Message-Id: <1281017333-5563-12-git-send-email-u.kleine-koenig@pengutronix.de> These two structs are referenced by cam60_spi_devices. The latter is copied at init time to kmalloced memory and so the copy isn't freed after booting. So it must not contain references to .init memory. This isn't noticed by modpost as cam60_spi_devices is in .init.data, too. Noticed-and-Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>		2010-08-10 22:46:56 +01:00
..
include/mach	ARM: 6209/3: at91_udc: Add vbus polarity and polling mode	2010-07-18 20:39:10 +01:00
at91cap9_devices.c
at91cap9.c
at91rm9200_devices.c
at91rm9200_time.c	arm/at91: Don't disable irqs in set_next_event and set_mode callbacks	2010-01-22 17:04:39 +01:00
at91rm9200.c
at91sam9g45_devices.c
at91sam9g45.c	ARM: 6169/1: AT91: add new at91 chips in at91sam9g45 family	2010-06-16 23:00:02 +01:00
at91sam9rl_devices.c
at91sam9rl.c
at91sam926x_time.c	arm/at91: Don't disable irqs in set_next_event and set_mode callbacks	2010-01-22 17:04:39 +01:00
at91sam9260_devices.c
at91sam9260.c
at91sam9261_devices.c
at91sam9261.c
at91sam9263_devices.c
at91sam9263.c
at91x40_time.c
at91x40.c
at572d940hf_devices.c	ARM: 5850/1: [AT91] AT572D940HF processor support	2010-01-20 12:34:06 +00:00
at572d940hf.c	ARM: 5850/1: [AT91] AT572D940HF processor support	2010-01-20 12:34:06 +00:00
board-1arm.c
board-afeb-9260v1.c
board-at572d940hf_ek.c	ARM: 5851/1: [AT91] AT572D940HF-EK board support	2010-01-20 12:36:27 +00:00
board-cam60.c	ARM: 6323/1: cam60: don't use __init for cam60_spi_{flash_platform_data,partitions}	2010-08-10 22:46:56 +01:00
board-cap9adk.c
board-carmeva.c
board-cpu9krea.c
board-cpuat91.c
board-csb337.c
board-csb637.c
board-dk.c
board-eb01.c
board-eb9200.c
board-ecbat91.c
board-eco920.c
board-ek.c
board-kafa.c
board-kb9202.c
board-neocore926.c
board-picotux200.c
board-qil-a9260.c
board-sam9-l9260.c
board-sam9g20ek-2slot-mmc.c	ARM: 6163/1: at91sam9g20ek: add fixed-value regulator for wm8731	2010-06-16 23:00:01 +01:00
board-sam9g20ek.c	ARM: 6162/1: at91sam9g20ek: add fixed-value regulator for wm8731	2010-06-16 23:00:01 +01:00
board-sam9m10g45ek.c	ARM: mach-at91: duplicated include	2010-05-24 20:40:13 +01:00
board-sam9rlek.c
board-sam9260ek.c
board-sam9261ek.c
board-sam9263ek.c
board-snapper9260.c	ARM: 6209/2: at91: Add support for Bluewater Systems Snapper 9260/9G20 modules	2010-07-09 12:31:52 +01:00
board-stamp9g20.c	ARM: 6054/1: AT91: taskit PortuxG20 and Stamp9G20 board support	2010-04-14 11:24:53 +01:00
board-usb-a9260.c
board-usb-a9263.c
board-yl-9200.c
clock.c	ARM: 5850/1: [AT91] AT572D940HF processor support	2010-01-20 12:34:06 +00:00
clock.h	ARM: 5850/1: [AT91] AT572D940HF processor support	2010-01-20 12:34:06 +00:00
cpuidle.c
generic.h	ARM: 5850/1: [AT91] AT572D940HF processor support	2010-01-20 12:34:06 +00:00
gpio.c
irq.c
Kconfig	ARM: 6209/2: at91: Add support for Bluewater Systems Snapper 9260/9G20 modules	2010-07-09 12:31:52 +01:00
leds.c
Makefile	ARM: 6209/2: at91: Add support for Bluewater Systems Snapper 9260/9G20 modules	2010-07-09 12:31:52 +01:00
Makefile.boot
pm_slowclock.S	ARM: 6185/1: AT91: PM: dual ram controller support	2010-07-09 12:31:50 +01:00
pm.c
pm.h	ARM: 6185/1: AT91: PM: dual ram controller support	2010-07-09 12:31:50 +01:00
sam9_smc.c
sam9_smc.h