davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
bfdc0b497f
kernel-ark/drivers/mfd/wm8994-irq.c
Mark Brown 25a947f805 mfd: Convert Wolfson MFD drivers to use irq_data accessor function 
Actually makes the code larger rathe rthan smaller but does provide some
isolation against core API changes.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:38:10 +01:00

313 lines
7.1 KiB
C
Raw Blame History

/*
* wm8994-irq.c -- Interrupt controller support for Wolfson WM8994
*
* Copyright 2010 Wolfson Microelectronics PLC.
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/irq.h>
#include <linux/mfd/core.h>
#include <linux/interrupt.h>
#include <linux/mfd/wm8994/core.h>
#include <linux/mfd/wm8994/registers.h>
#include <linux/delay.h>
struct wm8994_irq_data {
int reg;
int mask;
};
static struct wm8994_irq_data wm8994_irqs[] = {
[WM8994_IRQ_TEMP_SHUT] = {
.reg = 2,
.mask = WM8994_TEMP_SHUT_EINT,
},
[WM8994_IRQ_MIC1_DET] = {
.reg = 2,
.mask = WM8994_MIC1_DET_EINT,
},
[WM8994_IRQ_MIC1_SHRT] = {
.reg = 2,
.mask = WM8994_MIC1_SHRT_EINT,
},
[WM8994_IRQ_MIC2_DET] = {
.reg = 2,
.mask = WM8994_MIC2_DET_EINT,
},
[WM8994_IRQ_MIC2_SHRT] = {
.reg = 2,
.mask = WM8994_MIC2_SHRT_EINT,
},
[WM8994_IRQ_FLL1_LOCK] = {
.reg = 2,
.mask = WM8994_FLL1_LOCK_EINT,
},
[WM8994_IRQ_FLL2_LOCK] = {
.reg = 2,
.mask = WM8994_FLL2_LOCK_EINT,
},
[WM8994_IRQ_SRC1_LOCK] = {
.reg = 2,
.mask = WM8994_SRC1_LOCK_EINT,
},
[WM8994_IRQ_SRC2_LOCK] = {
.reg = 2,
.mask = WM8994_SRC2_LOCK_EINT,
},
[WM8994_IRQ_AIF1DRC1_SIG_DET] = {
.reg = 2,
.mask = WM8994_AIF1DRC1_SIG_DET,
},
[WM8994_IRQ_AIF1DRC2_SIG_DET] = {
.reg = 2,
.mask = WM8994_AIF1DRC2_SIG_DET_EINT,
},
[WM8994_IRQ_AIF2DRC_SIG_DET] = {
.reg = 2,
.mask = WM8994_AIF2DRC_SIG_DET_EINT,
},
[WM8994_IRQ_FIFOS_ERR] = {
.reg = 2,
.mask = WM8994_FIFOS_ERR_EINT,
},
[WM8994_IRQ_WSEQ_DONE] = {
.reg = 2,
.mask = WM8994_WSEQ_DONE_EINT,
},
[WM8994_IRQ_DCS_DONE] = {
.reg = 2,
.mask = WM8994_DCS_DONE_EINT,
},
[WM8994_IRQ_TEMP_WARN] = {
.reg = 2,
.mask = WM8994_TEMP_WARN_EINT,
},
[WM8994_IRQ_GPIO(1)] = {
.reg = 1,
.mask = WM8994_GP1_EINT,
},
[WM8994_IRQ_GPIO(2)] = {
.reg = 1,
.mask = WM8994_GP2_EINT,
},
[WM8994_IRQ_GPIO(3)] = {
.reg = 1,
.mask = WM8994_GP3_EINT,
},
[WM8994_IRQ_GPIO(4)] = {
.reg = 1,
.mask = WM8994_GP4_EINT,
},
[WM8994_IRQ_GPIO(5)] = {
.reg = 1,
.mask = WM8994_GP5_EINT,
},
[WM8994_IRQ_GPIO(6)] = {
.reg = 1,
.mask = WM8994_GP6_EINT,
},
[WM8994_IRQ_GPIO(7)] = {
.reg = 1,
.mask = WM8994_GP7_EINT,
},
[WM8994_IRQ_GPIO(8)] = {
.reg = 1,
.mask = WM8994_GP8_EINT,
},
[WM8994_IRQ_GPIO(9)] = {
.reg = 1,
.mask = WM8994_GP8_EINT,
},
[WM8994_IRQ_GPIO(10)] = {
.reg = 1,
.mask = WM8994_GP10_EINT,
},
[WM8994_IRQ_GPIO(11)] = {
.reg = 1,
.mask = WM8994_GP11_EINT,
},
};
static inline int irq_data_to_status_reg(struct wm8994_irq_data *irq_data)
{
return WM8994_INTERRUPT_STATUS_1 - 1 + irq_data->reg;
}
static inline int irq_data_to_mask_reg(struct wm8994_irq_data *irq_data)
{
return WM8994_INTERRUPT_STATUS_1_MASK - 1 + irq_data->reg;
}
static inline struct wm8994_irq_data *irq_to_wm8994_irq(struct wm8994 *wm8994,
int irq)
{
return &wm8994_irqs[irq - wm8994->irq_base];
}
static void wm8994_irq_lock(struct irq_data *data)
{
struct wm8994 *wm8994 = irq_data_get_irq_chip_data(data);
mutex_lock(&wm8994->irq_lock);
}
static void wm8994_irq_sync_unlock(struct irq_data *data)
{
struct wm8994 *wm8994 = irq_data_get_irq_chip_data(data);
int i;
for (i = 0; i < ARRAY_SIZE(wm8994->irq_masks_cur); i++) {
/* If there's been a change in the mask write it back
* to the hardware. */
if (wm8994->irq_masks_cur[i] != wm8994->irq_masks_cache[i]) {
wm8994->irq_masks_cache[i] = wm8994->irq_masks_cur[i];
wm8994_reg_write(wm8994,
WM8994_INTERRUPT_STATUS_1_MASK + i,
wm8994->irq_masks_cur[i]);
}
}
mutex_unlock(&wm8994->irq_lock);
}
static void wm8994_irq_unmask(struct irq_data *data)
{
struct wm8994 *wm8994 = irq_data_get_irq_chip_data(data);
struct wm8994_irq_data *irq_data = irq_to_wm8994_irq(wm8994,
data->irq);
wm8994->irq_masks_cur[irq_data->reg - 1] &= ~irq_data->mask;
}
static void wm8994_irq_mask(struct irq_data *data)
{
struct wm8994 *wm8994 = irq_data_get_irq_chip_data(data);
struct wm8994_irq_data *irq_data = irq_to_wm8994_irq(wm8994,
data->irq);
wm8994->irq_masks_cur[irq_data->reg - 1] |= irq_data->mask;
}
static struct irq_chip wm8994_irq_chip = {
.name = "wm8994",
.irq_bus_lock = wm8994_irq_lock,
.irq_bus_sync_unlock = wm8994_irq_sync_unlock,
.irq_mask = wm8994_irq_mask,
.irq_unmask = wm8994_irq_unmask,
};
/* The processing of the primary interrupt occurs in a thread so that
* we can interact with the device over I2C or SPI. */
static irqreturn_t wm8994_irq_thread(int irq, void *data)
{
struct wm8994 *wm8994 = data;
unsigned int i;
u16 status[WM8994_NUM_IRQ_REGS];
int ret;
ret = wm8994_bulk_read(wm8994, WM8994_INTERRUPT_STATUS_1,
WM8994_NUM_IRQ_REGS, status);
if (ret < 0) {
dev_err(wm8994->dev, "Failed to read interrupt status: %d\n",
ret);
return IRQ_NONE;
}
/* Apply masking */
for (i = 0; i < WM8994_NUM_IRQ_REGS; i++)
status[i] &= ~wm8994->irq_masks_cur[i];
/* Report */
for (i = 0; i < ARRAY_SIZE(wm8994_irqs); i++) {
if (status[wm8994_irqs[i].reg - 1] & wm8994_irqs[i].mask)
handle_nested_irq(wm8994->irq_base + i);
}
/* Ack any unmasked IRQs */
for (i = 0; i < ARRAY_SIZE(status); i++) {
if (status[i])
wm8994_reg_write(wm8994, WM8994_INTERRUPT_STATUS_1 + i,
status[i]);
}
return IRQ_HANDLED;
}
int wm8994_irq_init(struct wm8994 *wm8994)
{
int i, cur_irq, ret;
mutex_init(&wm8994->irq_lock);
/* Mask the individual interrupt sources */
for (i = 0; i < ARRAY_SIZE(wm8994->irq_masks_cur); i++) {
wm8994->irq_masks_cur[i] = 0xffff;
wm8994->irq_masks_cache[i] = 0xffff;
wm8994_reg_write(wm8994, WM8994_INTERRUPT_STATUS_1_MASK + i,
0xffff);
}
if (!wm8994->irq) {
dev_warn(wm8994->dev,
"No interrupt specified, no interrupts\n");
wm8994->irq_base = 0;
return 0;
}
if (!wm8994->irq_base) {
dev_err(wm8994->dev,
"No interrupt base specified, no interrupts\n");
return 0;
}
/* Register them with genirq */
for (cur_irq = wm8994->irq_base;
cur_irq < ARRAY_SIZE(wm8994_irqs) + wm8994->irq_base;
cur_irq++) {
set_irq_chip_data(cur_irq, wm8994);
set_irq_chip_and_handler(cur_irq, &wm8994_irq_chip,
handle_edge_irq);
set_irq_nested_thread(cur_irq, 1);
/* ARM needs us to explicitly flag the IRQ as valid
* and will set them noprobe when we do so. */
#ifdef CONFIG_ARM
set_irq_flags(cur_irq, IRQF_VALID);
#else
set_irq_noprobe(cur_irq);
#endif
}
ret = request_threaded_irq(wm8994->irq, NULL, wm8994_irq_thread,
IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
"wm8994", wm8994);
if (ret != 0) {
dev_err(wm8994->dev, "Failed to request IRQ %d: %d\n",
wm8994->irq, ret);
return ret;
}
/* Enable top level interrupt if it was masked */
wm8994_reg_write(wm8994, WM8994_INTERRUPT_CONTROL, 0);
return 0;
}
void wm8994_irq_exit(struct wm8994 *wm8994)
{
if (wm8994->irq)
free_irq(wm8994->irq, wm8994);
}
Reference in New Issue View Git Blame Copy Permalink