kernel-ark/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
Jamie Iles fee7565679 picoxcell: add the DTS for pc3x2 and pc3x3 devices
This describes the basic hierarchy of picoxcell pc3x3 devices including
clocks and bus interconnect.  Some onchip devices are currently omitted
as there haven't been bindings created for them.

v2:	- change timer compatible strings to be more soc specific
	- split vic node into 2 devices

Signed-off-by: Jamie Iles <jamie@jamieiles.com>
2011-09-26 16:12:06 +01:00

250 lines
5.4 KiB
Plaintext

/*
* Copyright (C) 2011 Picochip, Jamie Iles
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/include/ "skeleton.dtsi"
/ {
model = "Picochip picoXcell PC3X2";
compatible = "picochip,pc3x2";
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,1176jz-s";
clock-frequency = <400000000>;
reg = <0>;
d-cache-line-size = <32>;
d-cache-size = <32768>;
i-cache-line-size = <32>;
i-cache-size = <32768>;
};
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
pclk: clock@0 {
compatible = "fixed-clock";
clock-outputs = "bus", "pclk";
clock-frequency = <200000000>;
ref-clock = <&ref_clk>, "ref";
};
};
paxi {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x80000000 0x400000>;
emac: gem@30000 {
compatible = "cadence,gem";
reg = <0x30000 0x10000>;
interrupts = <31>;
};
dmac1: dmac@40000 {
compatible = "snps,dw-dmac";
reg = <0x40000 0x10000>;
interrupts = <25>;
};
dmac2: dmac@50000 {
compatible = "snps,dw-dmac";
reg = <0x50000 0x10000>;
interrupts = <26>;
};
vic0: interrupt-controller@60000 {
compatible = "arm,pl192-vic";
interrupt-controller;
reg = <0x60000 0x1000>;
#interrupt-cells = <1>;
};
vic1: interrupt-controller@64000 {
compatible = "arm,pl192-vic";
interrupt-controller;
reg = <0x64000 0x1000>;
#interrupt-cells = <1>;
};
fuse: picoxcell-fuse@80000 {
compatible = "picoxcell,fuse-pc3x2";
reg = <0x80000 0x10000>;
};
ssi: picoxcell-spi@90000 {
compatible = "picoxcell,spi";
reg = <0x90000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <10>;
};
ipsec: spacc@100000 {
compatible = "picochip,spacc-ipsec";
reg = <0x100000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <24>;
ref-clock = <&pclk>, "ref";
};
srtp: spacc@140000 {
compatible = "picochip,spacc-srtp";
reg = <0x140000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <23>;
};
l2_engine: spacc@180000 {
compatible = "picochip,spacc-l2";
reg = <0x180000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <22>;
ref-clock = <&pclk>, "ref";
};
apb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x200000 0x80000>;
rtc0: rtc@00000 {
compatible = "picochip,pc3x2-rtc";
clock-freq = <200000000>;
reg = <0x00000 0xf>;
interrupt-parent = <&vic1>;
interrupts = <8>;
};
timer0: timer@10000 {
compatible = "picochip,pc3x2-timer";
interrupt-parent = <&vic0>;
interrupts = <4>;
clock-freq = <200000000>;
reg = <0x10000 0x14>;
};
timer1: timer@10014 {
compatible = "picochip,pc3x2-timer";
interrupt-parent = <&vic0>;
interrupts = <5>;
clock-freq = <200000000>;
reg = <0x10014 0x14>;
};
timer2: timer@10028 {
compatible = "picochip,pc3x2-timer";
interrupt-parent = <&vic0>;
interrupts = <6>;
clock-freq = <200000000>;
reg = <0x10028 0x14>;
};
timer3: timer@1003c {
compatible = "picochip,pc3x2-timer";
interrupt-parent = <&vic0>;
interrupts = <7>;
clock-freq = <200000000>;
reg = <0x1003c 0x14>;
};
gpio: gpio@20000 {
compatible = "snps,dw-apb-gpio";
reg = <0x20000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
reg-io-width = <4>;
banka: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-bank";
gpio-controller;
#gpio-cells = <2>;
gpio-generic,nr-gpio = <8>;
regoffset-dat = <0x50>;
regoffset-set = <0x00>;
regoffset-dirout = <0x04>;
};
bankb: gpio-controller@1 {
compatible = "snps,dw-apb-gpio-bank";
gpio-controller;
#gpio-cells = <2>;
gpio-generic,nr-gpio = <8>;
regoffset-dat = <0x54>;
regoffset-set = <0x0c>;
regoffset-dirout = <0x10>;
};
};
uart0: uart@30000 {
compatible = "snps,dw-apb-uart";
reg = <0x30000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <10>;
clock-frequency = <3686400>;
reg-shift = <2>;
reg-io-width = <4>;
};
uart1: uart@40000 {
compatible = "snps,dw-apb-uart";
reg = <0x40000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <9>;
clock-frequency = <3686400>;
reg-shift = <2>;
reg-io-width = <4>;
};
wdog: watchdog@50000 {
compatible = "snps,dw-apb-wdg";
reg = <0x50000 0x10000>;
interrupt-parent = <&vic0>;
interrupts = <11>;
bus-clock = <&pclk>, "bus";
};
};
};
rwid-axi {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges;
ebi@50000000 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x40000000 0x08000000
1 0 0x48000000 0x08000000
2 0 0x50000000 0x08000000
3 0 0x58000000 0x08000000>;
};
axi2pico@c0000000 {
compatible = "picochip,axi2pico-pc3x2";
reg = <0xc0000000 0x10000>;
interrupts = <13 14 15 16 17 18 19 20 21>;
};
};
};