davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
be70445c2d
kernel-ark/arch/arm/mach-s5pv210/mach-aquila.c
Tomasz Figa 4280e0b42b regulator: max8998: Use arrays for specifying voltages in platform data 
This patch modifies the platform data of max8998 to use arrays for
specifying predefined voltages of buck1 and buck2 instead of separate
field for each voltage.

This allows to simplify the code a bit and will help in adding support
for Device Tree, which will be introduced in further patch.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-30 23:30:03 +02:00

688 lines
16 KiB
C
Raw Blame History

/* linux/arch/arm/mach-s5pv210/mach-aquila.c
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/fb.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <linux/mfd/max8998.h>
#include <linux/mfd/wm8994/pdata.h>
#include <linux/regulator/fixed.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <video/samsung_fimd.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-serial.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb.h>
#include <plat/fimc-core.h>
#include <plat/sdhci.h>
#include <plat/samsung-time.h>
#include "common.h"
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define AQUILA_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
#define AQUILA_ULCON_DEFAULT S3C2410_LCON_CS8
#define AQUILA_UFCON_DEFAULT S3C2410_UFCON_FIFOMODE
static struct s3c2410_uartcfg aquila_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = AQUILA_UCON_DEFAULT,
.ulcon = AQUILA_ULCON_DEFAULT,
/*
* Actually UART0 can support 256 bytes fifo, but aquila board
* supports 128 bytes fifo because of initial chip bug
*/
.ufcon = AQUILA_UFCON_DEFAULT |
S5PV210_UFCON_TXTRIG128 | S5PV210_UFCON_RXTRIG128,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = AQUILA_UCON_DEFAULT,
.ulcon = AQUILA_ULCON_DEFAULT,
.ufcon = AQUILA_UFCON_DEFAULT |
S5PV210_UFCON_TXTRIG64 | S5PV210_UFCON_RXTRIG64,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = AQUILA_UCON_DEFAULT,
.ulcon = AQUILA_ULCON_DEFAULT,
.ufcon = AQUILA_UFCON_DEFAULT |
S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
},
[3] = {
.hwport = 3,
.flags = 0,
.ucon = AQUILA_UCON_DEFAULT,
.ulcon = AQUILA_ULCON_DEFAULT,
.ufcon = AQUILA_UFCON_DEFAULT |
S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
},
};
/* Frame Buffer */
static struct s3c_fb_pd_win aquila_fb_win0 = {
.max_bpp = 32,
.default_bpp = 16,
.xres = 480,
.yres = 800,
};
static struct s3c_fb_pd_win aquila_fb_win1 = {
.max_bpp = 32,
.default_bpp = 16,
.xres = 480,
.yres = 800,
};
static struct fb_videomode aquila_lcd_timing = {
.left_margin = 16,
.right_margin = 16,
.upper_margin = 3,
.lower_margin = 28,
.hsync_len = 2,
.vsync_len = 2,
.xres = 480,
.yres = 800,
};
static struct s3c_fb_platdata aquila_lcd_pdata __initdata = {
.win[0] = &aquila_fb_win0,
.win[1] = &aquila_fb_win1,
.vtiming = &aquila_lcd_timing,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
VIDCON1_INV_VCLK | VIDCON1_INV_VDEN,
.setup_gpio = s5pv210_fb_gpio_setup_24bpp,
};
/* MAX8998 regulators */
#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
static struct regulator_init_data aquila_ldo2_data = {
.constraints = {
.name = "VALIVE_1.1V",
.min_uV = 1100000,
.max_uV = 1100000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.enabled = 1,
},
},
};
static struct regulator_init_data aquila_ldo3_data = {
.constraints = {
.name = "VUSB+MIPI_1.1V",
.min_uV = 1100000,
.max_uV = 1100000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct regulator_init_data aquila_ldo4_data = {
.constraints = {
.name = "VDAC_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
},
};
static struct regulator_init_data aquila_ldo5_data = {
.constraints = {
.name = "VTF_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
},
};
static struct regulator_init_data aquila_ldo6_data = {
.constraints = {
.name = "VCC_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
},
};
static struct regulator_init_data aquila_ldo7_data = {
.constraints = {
.name = "VCC_3.0V",
.min_uV = 3000000,
.max_uV = 3000000,
.apply_uV = 1,
.boot_on = 1,
.always_on = 1,
},
};
static struct regulator_init_data aquila_ldo8_data = {
.constraints = {
.name = "VUSB+VADC_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct regulator_init_data aquila_ldo9_data = {
.constraints = {
.name = "VCC+VCAM_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct regulator_init_data aquila_ldo10_data = {
.constraints = {
.name = "VPLL_1.1V",
.min_uV = 1100000,
.max_uV = 1100000,
.apply_uV = 1,
.boot_on = 1,
},
};
static struct regulator_init_data aquila_ldo11_data = {
.constraints = {
.name = "CAM_IO_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct regulator_init_data aquila_ldo12_data = {
.constraints = {
.name = "CAM_ISP_1.2V",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct regulator_init_data aquila_ldo13_data = {
.constraints = {
.name = "CAM_A_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct regulator_init_data aquila_ldo14_data = {
.constraints = {
.name = "CAM_CIF_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct regulator_init_data aquila_ldo15_data = {
.constraints = {
.name = "CAM_AF_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct regulator_init_data aquila_ldo16_data = {
.constraints = {
.name = "VMIPI_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct regulator_init_data aquila_ldo17_data = {
.constraints = {
.name = "CAM_8M_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.always_on = 1,
},
};
/* BUCK */
static struct regulator_consumer_supply buck1_consumer =
REGULATOR_SUPPLY("vddarm", NULL);
static struct regulator_consumer_supply buck2_consumer =
REGULATOR_SUPPLY("vddint", NULL);
static struct regulator_init_data aquila_buck1_data = {
.constraints = {
.name = "VARM_1.2V",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &buck1_consumer,
};
static struct regulator_init_data aquila_buck2_data = {
.constraints = {
.name = "VINT_1.2V",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &buck2_consumer,
};
static struct regulator_init_data aquila_buck3_data = {
.constraints = {
.name = "VCC_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.state_mem = {
.enabled = 1,
},
},
};
static struct regulator_init_data aquila_buck4_data = {
.constraints = {
.name = "CAM_CORE_1.2V",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct max8998_regulator_data aquila_regulators[] = {
{ MAX8998_LDO2, &aquila_ldo2_data },
{ MAX8998_LDO3, &aquila_ldo3_data },
{ MAX8998_LDO4, &aquila_ldo4_data },
{ MAX8998_LDO5, &aquila_ldo5_data },
{ MAX8998_LDO6, &aquila_ldo6_data },
{ MAX8998_LDO7, &aquila_ldo7_data },
{ MAX8998_LDO8, &aquila_ldo8_data },
{ MAX8998_LDO9, &aquila_ldo9_data },
{ MAX8998_LDO10, &aquila_ldo10_data },
{ MAX8998_LDO11, &aquila_ldo11_data },
{ MAX8998_LDO12, &aquila_ldo12_data },
{ MAX8998_LDO13, &aquila_ldo13_data },
{ MAX8998_LDO14, &aquila_ldo14_data },
{ MAX8998_LDO15, &aquila_ldo15_data },
{ MAX8998_LDO16, &aquila_ldo16_data },
{ MAX8998_LDO17, &aquila_ldo17_data },
{ MAX8998_BUCK1, &aquila_buck1_data },
{ MAX8998_BUCK2, &aquila_buck2_data },
{ MAX8998_BUCK3, &aquila_buck3_data },
{ MAX8998_BUCK4, &aquila_buck4_data },
};
static struct max8998_platform_data aquila_max8998_pdata = {
.num_regulators = ARRAY_SIZE(aquila_regulators),
.regulators = aquila_regulators,
.buck1_set1 = S5PV210_GPH0(3),
.buck1_set2 = S5PV210_GPH0(4),
.buck2_set3 = S5PV210_GPH0(5),
.buck1_voltage = { 1200000, 1200000, 1200000, 1200000 },
.buck2_voltage = { 1200000, 1200000 },
};
#endif
static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = {
REGULATOR_SUPPLY("DBVDD", "5-001a"),
REGULATOR_SUPPLY("AVDD2", "5-001a"),
REGULATOR_SUPPLY("CPVDD", "5-001a"),
};
static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = {
REGULATOR_SUPPLY("SPKVDD1", "5-001a"),
REGULATOR_SUPPLY("SPKVDD2", "5-001a"),
};
static struct regulator_init_data wm8994_fixed_voltage0_init_data = {
.constraints = {
.always_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage0_supplies),
.consumer_supplies = wm8994_fixed_voltage0_supplies,
};
static struct regulator_init_data wm8994_fixed_voltage1_init_data = {
.constraints = {
.always_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage1_supplies),
.consumer_supplies = wm8994_fixed_voltage1_supplies,
};
static struct fixed_voltage_config wm8994_fixed_voltage0_config = {
.supply_name = "VCC_1.8V_PDA",
.microvolts = 1800000,
.gpio = -EINVAL,
.init_data = &wm8994_fixed_voltage0_init_data,
};
static struct fixed_voltage_config wm8994_fixed_voltage1_config = {
.supply_name = "V_BAT",
.microvolts = 3700000,
.gpio = -EINVAL,
.init_data = &wm8994_fixed_voltage1_init_data,
};
static struct platform_device wm8994_fixed_voltage0 = {
.name = "reg-fixed-voltage",
.id = 0,
.dev = {
.platform_data = &wm8994_fixed_voltage0_config,
},
};
static struct platform_device wm8994_fixed_voltage1 = {
.name = "reg-fixed-voltage",
.id = 1,
.dev = {
.platform_data = &wm8994_fixed_voltage1_config,
},
};
static struct regulator_consumer_supply wm8994_avdd1_supply =
REGULATOR_SUPPLY("AVDD1", "5-001a");
static struct regulator_consumer_supply wm8994_dcvdd_supply =
REGULATOR_SUPPLY("DCVDD", "5-001a");
static struct regulator_init_data wm8994_ldo1_data = {
.constraints = {
.name = "AVDD1_3.0V",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &wm8994_avdd1_supply,
};
static struct regulator_init_data wm8994_ldo2_data = {
.constraints = {
.name = "DCVDD_1.0V",
},
.num_consumer_supplies = 1,
.consumer_supplies = &wm8994_dcvdd_supply,
};
static struct wm8994_pdata wm8994_platform_data = {
/* configure gpio1 function: 0x0001(Logic level input/output) */
.gpio_defaults[0] = 0x0001,
/* configure gpio3/4/5/7 function for AIF2 voice */
.gpio_defaults[2] = 0x8100,
.gpio_defaults[3] = 0x8100,
.gpio_defaults[4] = 0x8100,
.gpio_defaults[6] = 0x0100,
/* configure gpio8/9/10/11 function for AIF3 BT */
.gpio_defaults[7] = 0x8100,
.gpio_defaults[8] = 0x0100,
.gpio_defaults[9] = 0x0100,
.gpio_defaults[10] = 0x0100,
.ldo[0] = { S5PV210_MP03(6), &wm8994_ldo1_data }, /* XM0FRNB_2 */
.ldo[1] = { 0, &wm8994_ldo2_data },
};
/* GPIO I2C PMIC */
#define AP_I2C_GPIO_PMIC_BUS_4 4
static struct i2c_gpio_platform_data aquila_i2c_gpio_pmic_data = {
.sda_pin = S5PV210_GPJ4(0), /* XMSMCSN */
.scl_pin = S5PV210_GPJ4(3), /* XMSMIRQN */
};
static struct platform_device aquila_i2c_gpio_pmic = {
.name = "i2c-gpio",
.id = AP_I2C_GPIO_PMIC_BUS_4,
.dev = {
.platform_data = &aquila_i2c_gpio_pmic_data,
},
};
static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = {
#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
{
/* 0xCC when SRAD = 0 */
I2C_BOARD_INFO("max8998", 0xCC >> 1),
.platform_data = &aquila_max8998_pdata,
},
#endif
};
/* GPIO I2C AP 1.8V */
#define AP_I2C_GPIO_BUS_5 5
static struct i2c_gpio_platform_data aquila_i2c_gpio5_data = {
.sda_pin = S5PV210_MP05(3), /* XM0ADDR_11 */
.scl_pin = S5PV210_MP05(2), /* XM0ADDR_10 */
};
static struct platform_device aquila_i2c_gpio5 = {
.name = "i2c-gpio",
.id = AP_I2C_GPIO_BUS_5,
.dev = {
.platform_data = &aquila_i2c_gpio5_data,
},
};
static struct i2c_board_info i2c_gpio5_devs[] __initdata = {
{
/* CS/ADDR = low 0x34 (FYI: high = 0x36) */
I2C_BOARD_INFO("wm8994", 0x1a),
.platform_data = &wm8994_platform_data,
},
};
/* PMIC Power button */
static struct gpio_keys_button aquila_gpio_keys_table[] = {
{
.code = KEY_POWER,
.gpio = S5PV210_GPH2(6),
.desc = "gpio-keys: KEY_POWER",
.type = EV_KEY,
.active_low = 1,
.wakeup = 1,
.debounce_interval = 1,
},
};
static struct gpio_keys_platform_data aquila_gpio_keys_data = {
.buttons = aquila_gpio_keys_table,
.nbuttons = ARRAY_SIZE(aquila_gpio_keys_table),
};
static struct platform_device aquila_device_gpiokeys = {
.name = "gpio-keys",
.dev = {
.platform_data = &aquila_gpio_keys_data,
},
};
static void __init aquila_pmic_init(void)
{
/* AP_PMIC_IRQ: EINT7 */
s3c_gpio_cfgpin(S5PV210_GPH0(7), S3C_GPIO_SFN(0xf));
s3c_gpio_setpull(S5PV210_GPH0(7), S3C_GPIO_PULL_UP);
/* nPower: EINT22 */
s3c_gpio_cfgpin(S5PV210_GPH2(6), S3C_GPIO_SFN(0xf));
s3c_gpio_setpull(S5PV210_GPH2(6), S3C_GPIO_PULL_UP);
}
/* MoviNAND */
static struct s3c_sdhci_platdata aquila_hsmmc0_data __initdata = {
.max_width = 4,
.cd_type = S3C_SDHCI_CD_PERMANENT,
};
/* Wireless LAN */
static struct s3c_sdhci_platdata aquila_hsmmc1_data __initdata = {
.max_width = 4,
.cd_type = S3C_SDHCI_CD_EXTERNAL,
/* ext_cd_{init,cleanup} callbacks will be added later */
};
/* External Flash */
#define AQUILA_EXT_FLASH_EN S5PV210_MP05(4)
#define AQUILA_EXT_FLASH_CD S5PV210_GPH3(4)
static struct s3c_sdhci_platdata aquila_hsmmc2_data __initdata = {
.max_width = 4,
.cd_type = S3C_SDHCI_CD_GPIO,
.ext_cd_gpio = AQUILA_EXT_FLASH_CD,
.ext_cd_gpio_invert = 1,
};
static void aquila_setup_sdhci(void)
{
gpio_request_one(AQUILA_EXT_FLASH_EN, GPIOF_OUT_INIT_HIGH, "FLASH_EN");
s3c_sdhci0_set_platdata(&aquila_hsmmc0_data);
s3c_sdhci1_set_platdata(&aquila_hsmmc1_data);
s3c_sdhci2_set_platdata(&aquila_hsmmc2_data);
};
/* Audio device */
static struct platform_device aquila_device_audio = {
.name = "smdk-audio",
.id = -1,
};
static struct platform_device *aquila_devices[] __initdata = {
&aquila_i2c_gpio_pmic,
&aquila_i2c_gpio5,
&aquila_device_gpiokeys,
&aquila_device_audio,
&s3c_device_fb,
&s5p_device_onenand,
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
&s3c_device_hsmmc2,
&s5p_device_fimc0,
&s5p_device_fimc1,
&s5p_device_fimc2,
&s5p_device_fimc_md,
&s5pv210_device_iis0,
&wm8994_fixed_voltage0,
&wm8994_fixed_voltage1,
};
static void __init aquila_sound_init(void)
{
unsigned int gpio;
/* CODEC_XTAL_EN
*
* The Aquila board have a oscillator which provide main clock
* to WM8994 codec. The oscillator provide 24MHz clock to WM8994
* clock. Set gpio setting of "CODEC_XTAL_EN" to enable a oscillator.
* */
gpio = S5PV210_GPH3(2); /* XEINT_26 */
gpio_request(gpio, "CODEC_XTAL_EN");
s3c_gpio_cfgpin(gpio, S3C_GPIO_OUTPUT);
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
/* Ths main clock of WM8994 codec uses the output of CLKOUT pin.
* The CLKOUT[9:8] set to 0x3(XUSBXTI) of 0xE010E000(OTHERS)
* because it needs 24MHz clock to operate WM8994 codec.
*/
__raw_writel(__raw_readl(S5P_OTHERS) | (0x3 << 8), S5P_OTHERS);
}
static void __init aquila_map_io(void)
{
s5pv210_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(aquila_uartcfgs, ARRAY_SIZE(aquila_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init aquila_machine_init(void)
{
/* PMIC */
aquila_pmic_init();
i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs,
ARRAY_SIZE(i2c_gpio_pmic_devs));
/* SDHCI */
aquila_setup_sdhci();
s3c_fimc_setname(0, "s5p-fimc");
s3c_fimc_setname(1, "s5p-fimc");
s3c_fimc_setname(2, "s5p-fimc");
/* SOUND */
aquila_sound_init();
i2c_register_board_info(AP_I2C_GPIO_BUS_5, i2c_gpio5_devs,
ARRAY_SIZE(i2c_gpio5_devs));
/* FB */
s3c_fb_set_platdata(&aquila_lcd_pdata);
platform_add_devices(aquila_devices, ARRAY_SIZE(aquila_devices));
}
MACHINE_START(AQUILA, "Aquila")
/* Maintainers:
Marek Szyprowski <m.szyprowski@samsung.com>
Kyungmin Park <kyungmin.park@samsung.com> */
.atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
.map_io = aquila_map_io,
.init_machine = aquila_machine_init,
.init_time = samsung_timer_init,
.restart = s5pv210_restart,
MACHINE_END
Reference in New Issue View Git Blame Copy Permalink