9a9a54ad7a
Add support for PMIC8xxx based RTC. PMIC8xxx is Qualcomm's power management IC that internally houses an RTC module. This driver communicates with the PMIC module over SSBI bus. [akpm@linux-foundation.org: cosmetic tweaks] Acked-by: Wan ZongShun <mcuos.com@gmail.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org> Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
551 lines
14 KiB
C
551 lines
14 KiB
C
/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/rtc.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#include <linux/mfd/pm8xxx/core.h>
|
|
#include <linux/mfd/pm8xxx/rtc.h>
|
|
|
|
|
|
/* RTC Register offsets from RTC CTRL REG */
|
|
#define PM8XXX_ALARM_CTRL_OFFSET 0x01
|
|
#define PM8XXX_RTC_WRITE_OFFSET 0x02
|
|
#define PM8XXX_RTC_READ_OFFSET 0x06
|
|
#define PM8XXX_ALARM_RW_OFFSET 0x0A
|
|
|
|
/* RTC_CTRL register bit fields */
|
|
#define PM8xxx_RTC_ENABLE BIT(7)
|
|
#define PM8xxx_RTC_ALARM_ENABLE BIT(1)
|
|
#define PM8xxx_RTC_ALARM_CLEAR BIT(0)
|
|
|
|
#define NUM_8_BIT_RTC_REGS 0x4
|
|
|
|
/**
|
|
* struct pm8xxx_rtc - rtc driver internal structure
|
|
* @rtc: rtc device for this driver.
|
|
* @rtc_alarm_irq: rtc alarm irq number.
|
|
* @rtc_base: address of rtc control register.
|
|
* @rtc_read_base: base address of read registers.
|
|
* @rtc_write_base: base address of write registers.
|
|
* @alarm_rw_base: base address of alarm registers.
|
|
* @ctrl_reg: rtc control register.
|
|
* @rtc_dev: device structure.
|
|
* @ctrl_reg_lock: spinlock protecting access to ctrl_reg.
|
|
*/
|
|
struct pm8xxx_rtc {
|
|
struct rtc_device *rtc;
|
|
int rtc_alarm_irq;
|
|
int rtc_base;
|
|
int rtc_read_base;
|
|
int rtc_write_base;
|
|
int alarm_rw_base;
|
|
u8 ctrl_reg;
|
|
struct device *rtc_dev;
|
|
spinlock_t ctrl_reg_lock;
|
|
};
|
|
|
|
/*
|
|
* The RTC registers need to be read/written one byte at a time. This is a
|
|
* hardware limitation.
|
|
*/
|
|
static int pm8xxx_read_wrapper(struct pm8xxx_rtc *rtc_dd, u8 *rtc_val,
|
|
int base, int count)
|
|
{
|
|
int i, rc;
|
|
struct device *parent = rtc_dd->rtc_dev->parent;
|
|
|
|
for (i = 0; i < count; i++) {
|
|
rc = pm8xxx_readb(parent, base + i, &rtc_val[i]);
|
|
if (rc < 0) {
|
|
dev_err(rtc_dd->rtc_dev, "PMIC read failed\n");
|
|
return rc;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pm8xxx_write_wrapper(struct pm8xxx_rtc *rtc_dd, u8 *rtc_val,
|
|
int base, int count)
|
|
{
|
|
int i, rc;
|
|
struct device *parent = rtc_dd->rtc_dev->parent;
|
|
|
|
for (i = 0; i < count; i++) {
|
|
rc = pm8xxx_writeb(parent, base + i, rtc_val[i]);
|
|
if (rc < 0) {
|
|
dev_err(rtc_dd->rtc_dev, "PMIC write failed\n");
|
|
return rc;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Steps to write the RTC registers.
|
|
* 1. Disable alarm if enabled.
|
|
* 2. Write 0x00 to LSB.
|
|
* 3. Write Byte[1], Byte[2], Byte[3] then Byte[0].
|
|
* 4. Enable alarm if disabled in step 1.
|
|
*/
|
|
static int pm8xxx_rtc_set_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
int rc, i;
|
|
unsigned long secs, irq_flags;
|
|
u8 value[NUM_8_BIT_RTC_REGS], reg = 0, alarm_enabled = 0, ctrl_reg;
|
|
struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
|
|
|
|
rtc_tm_to_time(tm, &secs);
|
|
|
|
for (i = 0; i < NUM_8_BIT_RTC_REGS; i++) {
|
|
value[i] = secs & 0xFF;
|
|
secs >>= 8;
|
|
}
|
|
|
|
dev_dbg(dev, "Seconds value to be written to RTC = %lu\n", secs);
|
|
|
|
spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
|
|
ctrl_reg = rtc_dd->ctrl_reg;
|
|
|
|
if (ctrl_reg & PM8xxx_RTC_ALARM_ENABLE) {
|
|
alarm_enabled = 1;
|
|
ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;
|
|
rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base,
|
|
1);
|
|
if (rc < 0) {
|
|
dev_err(dev, "Write to RTC control register "
|
|
"failed\n");
|
|
goto rtc_rw_fail;
|
|
}
|
|
rtc_dd->ctrl_reg = ctrl_reg;
|
|
} else
|
|
spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
|
|
|
|
/* Write 0 to Byte[0] */
|
|
reg = 0;
|
|
rc = pm8xxx_write_wrapper(rtc_dd, ®, rtc_dd->rtc_write_base, 1);
|
|
if (rc < 0) {
|
|
dev_err(dev, "Write to RTC write data register failed\n");
|
|
goto rtc_rw_fail;
|
|
}
|
|
|
|
/* Write Byte[1], Byte[2], Byte[3] */
|
|
rc = pm8xxx_write_wrapper(rtc_dd, value + 1,
|
|
rtc_dd->rtc_write_base + 1, 3);
|
|
if (rc < 0) {
|
|
dev_err(dev, "Write to RTC write data register failed\n");
|
|
goto rtc_rw_fail;
|
|
}
|
|
|
|
/* Write Byte[0] */
|
|
rc = pm8xxx_write_wrapper(rtc_dd, value, rtc_dd->rtc_write_base, 1);
|
|
if (rc < 0) {
|
|
dev_err(dev, "Write to RTC write data register failed\n");
|
|
goto rtc_rw_fail;
|
|
}
|
|
|
|
if (alarm_enabled) {
|
|
ctrl_reg |= PM8xxx_RTC_ALARM_ENABLE;
|
|
rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base,
|
|
1);
|
|
if (rc < 0) {
|
|
dev_err(dev, "Write to RTC control register "
|
|
"failed\n");
|
|
goto rtc_rw_fail;
|
|
}
|
|
rtc_dd->ctrl_reg = ctrl_reg;
|
|
}
|
|
|
|
rtc_rw_fail:
|
|
if (alarm_enabled)
|
|
spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int pm8xxx_rtc_read_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
int rc;
|
|
u8 value[NUM_8_BIT_RTC_REGS], reg;
|
|
unsigned long secs;
|
|
struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
|
|
|
|
rc = pm8xxx_read_wrapper(rtc_dd, value, rtc_dd->rtc_read_base,
|
|
NUM_8_BIT_RTC_REGS);
|
|
if (rc < 0) {
|
|
dev_err(dev, "RTC read data register failed\n");
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* Read the LSB again and check if there has been a carry over.
|
|
* If there is, redo the read operation.
|
|
*/
|
|
rc = pm8xxx_read_wrapper(rtc_dd, ®, rtc_dd->rtc_read_base, 1);
|
|
if (rc < 0) {
|
|
dev_err(dev, "RTC read data register failed\n");
|
|
return rc;
|
|
}
|
|
|
|
if (unlikely(reg < value[0])) {
|
|
rc = pm8xxx_read_wrapper(rtc_dd, value,
|
|
rtc_dd->rtc_read_base, NUM_8_BIT_RTC_REGS);
|
|
if (rc < 0) {
|
|
dev_err(dev, "RTC read data register failed\n");
|
|
return rc;
|
|
}
|
|
}
|
|
|
|
secs = value[0] | (value[1] << 8) | (value[2] << 16) | (value[3] << 24);
|
|
|
|
rtc_time_to_tm(secs, tm);
|
|
|
|
rc = rtc_valid_tm(tm);
|
|
if (rc < 0) {
|
|
dev_err(dev, "Invalid time read from RTC\n");
|
|
return rc;
|
|
}
|
|
|
|
dev_dbg(dev, "secs = %lu, h:m:s == %d:%d:%d, d/m/y = %d/%d/%d\n",
|
|
secs, tm->tm_hour, tm->tm_min, tm->tm_sec,
|
|
tm->tm_mday, tm->tm_mon, tm->tm_year);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pm8xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
|
|
{
|
|
int rc, i;
|
|
u8 value[NUM_8_BIT_RTC_REGS], ctrl_reg;
|
|
unsigned long secs, irq_flags;
|
|
struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
|
|
|
|
rtc_tm_to_time(&alarm->time, &secs);
|
|
|
|
for (i = 0; i < NUM_8_BIT_RTC_REGS; i++) {
|
|
value[i] = secs & 0xFF;
|
|
secs >>= 8;
|
|
}
|
|
|
|
spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
|
|
|
|
rc = pm8xxx_write_wrapper(rtc_dd, value, rtc_dd->alarm_rw_base,
|
|
NUM_8_BIT_RTC_REGS);
|
|
if (rc < 0) {
|
|
dev_err(dev, "Write to RTC ALARM register failed\n");
|
|
goto rtc_rw_fail;
|
|
}
|
|
|
|
ctrl_reg = rtc_dd->ctrl_reg;
|
|
ctrl_reg = alarm->enabled ? (ctrl_reg | PM8xxx_RTC_ALARM_ENABLE) :
|
|
(ctrl_reg & ~PM8xxx_RTC_ALARM_ENABLE);
|
|
|
|
rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
|
|
if (rc < 0) {
|
|
dev_err(dev, "Write to RTC control register failed\n");
|
|
goto rtc_rw_fail;
|
|
}
|
|
|
|
rtc_dd->ctrl_reg = ctrl_reg;
|
|
|
|
dev_dbg(dev, "Alarm Set for h:r:s=%d:%d:%d, d/m/y=%d/%d/%d\n",
|
|
alarm->time.tm_hour, alarm->time.tm_min,
|
|
alarm->time.tm_sec, alarm->time.tm_mday,
|
|
alarm->time.tm_mon, alarm->time.tm_year);
|
|
rtc_rw_fail:
|
|
spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
|
|
return rc;
|
|
}
|
|
|
|
static int pm8xxx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
|
|
{
|
|
int rc;
|
|
u8 value[NUM_8_BIT_RTC_REGS];
|
|
unsigned long secs;
|
|
struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
|
|
|
|
rc = pm8xxx_read_wrapper(rtc_dd, value, rtc_dd->alarm_rw_base,
|
|
NUM_8_BIT_RTC_REGS);
|
|
if (rc < 0) {
|
|
dev_err(dev, "RTC alarm time read failed\n");
|
|
return rc;
|
|
}
|
|
|
|
secs = value[0] | (value[1] << 8) | (value[2] << 16) | (value[3] << 24);
|
|
|
|
rtc_time_to_tm(secs, &alarm->time);
|
|
|
|
rc = rtc_valid_tm(&alarm->time);
|
|
if (rc < 0) {
|
|
dev_err(dev, "Invalid alarm time read from RTC\n");
|
|
return rc;
|
|
}
|
|
|
|
dev_dbg(dev, "Alarm set for - h:r:s=%d:%d:%d, d/m/y=%d/%d/%d\n",
|
|
alarm->time.tm_hour, alarm->time.tm_min,
|
|
alarm->time.tm_sec, alarm->time.tm_mday,
|
|
alarm->time.tm_mon, alarm->time.tm_year);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pm8xxx_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
|
|
{
|
|
int rc;
|
|
unsigned long irq_flags;
|
|
struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
|
|
u8 ctrl_reg;
|
|
|
|
spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
|
|
ctrl_reg = rtc_dd->ctrl_reg;
|
|
ctrl_reg = (enable) ? (ctrl_reg | PM8xxx_RTC_ALARM_ENABLE) :
|
|
(ctrl_reg & ~PM8xxx_RTC_ALARM_ENABLE);
|
|
|
|
rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
|
|
if (rc < 0) {
|
|
dev_err(dev, "Write to RTC control register failed\n");
|
|
goto rtc_rw_fail;
|
|
}
|
|
|
|
rtc_dd->ctrl_reg = ctrl_reg;
|
|
|
|
rtc_rw_fail:
|
|
spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
|
|
return rc;
|
|
}
|
|
|
|
static struct rtc_class_ops pm8xxx_rtc_ops = {
|
|
.read_time = pm8xxx_rtc_read_time,
|
|
.set_alarm = pm8xxx_rtc_set_alarm,
|
|
.read_alarm = pm8xxx_rtc_read_alarm,
|
|
.alarm_irq_enable = pm8xxx_rtc_alarm_irq_enable,
|
|
};
|
|
|
|
static irqreturn_t pm8xxx_alarm_trigger(int irq, void *dev_id)
|
|
{
|
|
struct pm8xxx_rtc *rtc_dd = dev_id;
|
|
u8 ctrl_reg;
|
|
int rc;
|
|
unsigned long irq_flags;
|
|
|
|
rtc_update_irq(rtc_dd->rtc, 1, RTC_IRQF | RTC_AF);
|
|
|
|
spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
|
|
|
|
/* Clear the alarm enable bit */
|
|
ctrl_reg = rtc_dd->ctrl_reg;
|
|
ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;
|
|
|
|
rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
|
|
if (rc < 0) {
|
|
spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
|
|
dev_err(rtc_dd->rtc_dev, "Write to RTC control register "
|
|
"failed\n");
|
|
goto rtc_alarm_handled;
|
|
}
|
|
|
|
rtc_dd->ctrl_reg = ctrl_reg;
|
|
spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
|
|
|
|
/* Clear RTC alarm register */
|
|
rc = pm8xxx_read_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base +
|
|
PM8XXX_ALARM_CTRL_OFFSET, 1);
|
|
if (rc < 0) {
|
|
dev_err(rtc_dd->rtc_dev, "RTC Alarm control register read "
|
|
"failed\n");
|
|
goto rtc_alarm_handled;
|
|
}
|
|
|
|
ctrl_reg &= ~PM8xxx_RTC_ALARM_CLEAR;
|
|
rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base +
|
|
PM8XXX_ALARM_CTRL_OFFSET, 1);
|
|
if (rc < 0)
|
|
dev_err(rtc_dd->rtc_dev, "Write to RTC Alarm control register"
|
|
" failed\n");
|
|
|
|
rtc_alarm_handled:
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int __devinit pm8xxx_rtc_probe(struct platform_device *pdev)
|
|
{
|
|
int rc;
|
|
u8 ctrl_reg;
|
|
bool rtc_write_enable = false;
|
|
struct pm8xxx_rtc *rtc_dd;
|
|
struct resource *rtc_resource;
|
|
const struct pm8xxx_rtc_platform_data *pdata =
|
|
dev_get_platdata(&pdev->dev);
|
|
|
|
if (pdata != NULL)
|
|
rtc_write_enable = pdata->rtc_write_enable;
|
|
|
|
rtc_dd = kzalloc(sizeof(*rtc_dd), GFP_KERNEL);
|
|
if (rtc_dd == NULL) {
|
|
dev_err(&pdev->dev, "Unable to allocate memory!\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Initialise spinlock to protect RTC control register */
|
|
spin_lock_init(&rtc_dd->ctrl_reg_lock);
|
|
|
|
rtc_dd->rtc_alarm_irq = platform_get_irq(pdev, 0);
|
|
if (rtc_dd->rtc_alarm_irq < 0) {
|
|
dev_err(&pdev->dev, "Alarm IRQ resource absent!\n");
|
|
rc = -ENXIO;
|
|
goto fail_rtc_enable;
|
|
}
|
|
|
|
rtc_resource = platform_get_resource_byname(pdev, IORESOURCE_IO,
|
|
"pmic_rtc_base");
|
|
if (!(rtc_resource && rtc_resource->start)) {
|
|
dev_err(&pdev->dev, "RTC IO resource absent!\n");
|
|
rc = -ENXIO;
|
|
goto fail_rtc_enable;
|
|
}
|
|
|
|
rtc_dd->rtc_base = rtc_resource->start;
|
|
|
|
/* Setup RTC register addresses */
|
|
rtc_dd->rtc_write_base = rtc_dd->rtc_base + PM8XXX_RTC_WRITE_OFFSET;
|
|
rtc_dd->rtc_read_base = rtc_dd->rtc_base + PM8XXX_RTC_READ_OFFSET;
|
|
rtc_dd->alarm_rw_base = rtc_dd->rtc_base + PM8XXX_ALARM_RW_OFFSET;
|
|
|
|
rtc_dd->rtc_dev = &pdev->dev;
|
|
|
|
/* Check if the RTC is on, else turn it on */
|
|
rc = pm8xxx_read_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
|
|
if (rc < 0) {
|
|
dev_err(&pdev->dev, "RTC control register read failed!\n");
|
|
goto fail_rtc_enable;
|
|
}
|
|
|
|
if (!(ctrl_reg & PM8xxx_RTC_ENABLE)) {
|
|
ctrl_reg |= PM8xxx_RTC_ENABLE;
|
|
rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base,
|
|
1);
|
|
if (rc < 0) {
|
|
dev_err(&pdev->dev, "Write to RTC control register "
|
|
"failed\n");
|
|
goto fail_rtc_enable;
|
|
}
|
|
}
|
|
|
|
rtc_dd->ctrl_reg = ctrl_reg;
|
|
if (rtc_write_enable == true)
|
|
pm8xxx_rtc_ops.set_time = pm8xxx_rtc_set_time;
|
|
|
|
platform_set_drvdata(pdev, rtc_dd);
|
|
|
|
/* Register the RTC device */
|
|
rtc_dd->rtc = rtc_device_register("pm8xxx_rtc", &pdev->dev,
|
|
&pm8xxx_rtc_ops, THIS_MODULE);
|
|
if (IS_ERR(rtc_dd->rtc)) {
|
|
dev_err(&pdev->dev, "%s: RTC registration failed (%ld)\n",
|
|
__func__, PTR_ERR(rtc_dd->rtc));
|
|
rc = PTR_ERR(rtc_dd->rtc);
|
|
goto fail_rtc_enable;
|
|
}
|
|
|
|
/* Request the alarm IRQ */
|
|
rc = request_any_context_irq(rtc_dd->rtc_alarm_irq,
|
|
pm8xxx_alarm_trigger, IRQF_TRIGGER_RISING,
|
|
"pm8xxx_rtc_alarm", rtc_dd);
|
|
if (rc < 0) {
|
|
dev_err(&pdev->dev, "Request IRQ failed (%d)\n", rc);
|
|
goto fail_req_irq;
|
|
}
|
|
|
|
device_init_wakeup(&pdev->dev, 1);
|
|
|
|
dev_dbg(&pdev->dev, "Probe success !!\n");
|
|
|
|
return 0;
|
|
|
|
fail_req_irq:
|
|
rtc_device_unregister(rtc_dd->rtc);
|
|
fail_rtc_enable:
|
|
platform_set_drvdata(pdev, NULL);
|
|
kfree(rtc_dd);
|
|
return rc;
|
|
}
|
|
|
|
static int __devexit pm8xxx_rtc_remove(struct platform_device *pdev)
|
|
{
|
|
struct pm8xxx_rtc *rtc_dd = platform_get_drvdata(pdev);
|
|
|
|
device_init_wakeup(&pdev->dev, 0);
|
|
free_irq(rtc_dd->rtc_alarm_irq, rtc_dd);
|
|
rtc_device_unregister(rtc_dd->rtc);
|
|
platform_set_drvdata(pdev, NULL);
|
|
kfree(rtc_dd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int pm8xxx_rtc_resume(struct device *dev)
|
|
{
|
|
struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
|
|
|
|
if (device_may_wakeup(dev))
|
|
disable_irq_wake(rtc_dd->rtc_alarm_irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pm8xxx_rtc_suspend(struct device *dev)
|
|
{
|
|
struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
|
|
|
|
if (device_may_wakeup(dev))
|
|
enable_irq_wake(rtc_dd->rtc_alarm_irq);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
SIMPLE_DEV_PM_OPS(pm8xxx_rtc_pm_ops, pm8xxx_rtc_suspend, pm8xxx_rtc_resume);
|
|
|
|
static struct platform_driver pm8xxx_rtc_driver = {
|
|
.probe = pm8xxx_rtc_probe,
|
|
.remove = __devexit_p(pm8xxx_rtc_remove),
|
|
.driver = {
|
|
.name = PM8XXX_RTC_DEV_NAME,
|
|
.owner = THIS_MODULE,
|
|
.pm = &pm8xxx_rtc_pm_ops,
|
|
},
|
|
};
|
|
|
|
static int __init pm8xxx_rtc_init(void)
|
|
{
|
|
return platform_driver_register(&pm8xxx_rtc_driver);
|
|
}
|
|
module_init(pm8xxx_rtc_init);
|
|
|
|
static void __exit pm8xxx_rtc_exit(void)
|
|
{
|
|
platform_driver_unregister(&pm8xxx_rtc_driver);
|
|
}
|
|
module_exit(pm8xxx_rtc_exit);
|
|
|
|
MODULE_ALIAS("platform:rtc-pm8xxx");
|
|
MODULE_DESCRIPTION("PMIC8xxx RTC driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("Anirudh Ghayal <aghayal@codeaurora.org>");
|